diff options
Diffstat (limited to 'Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml')
-rw-r--r-- | Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml | 56 |
1 files changed, 25 insertions, 31 deletions
diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml index 1e52dafcb5c9..d898800d6bca 100644 --- a/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: ROHM BD71828 Power Management Integrated Circuit regulators maintainers: - - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> + - Matti Vaittinen <mazziesaccount@gmail.com> description: | This module is part of the ROHM BD71828 MFD device. For more details @@ -24,10 +24,9 @@ description: | patternProperties: "^LDO[1-7]$": type: object - allOf: - - $ref: regulator.yaml# description: Properties for single LDO regulator. + $ref: regulator.yaml# properties: regulator-name: @@ -39,10 +38,9 @@ patternProperties: "^BUCK[1-7]$": type: object - allOf: - - $ref: regulator.yaml# description: Properties for single BUCK regulator. + $ref: regulator.yaml# properties: regulator-name: @@ -51,57 +49,53 @@ patternProperties: should be "buck1", ..., "buck7" rohm,dvs-run-voltage: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - maximum: 3300000 description: PMIC default "RUN" state voltage in uV. See below table for bucks which support this. 0 means disabled. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3300000 rohm,dvs-idle-voltage: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - maximum: 3300000 description: PMIC default "IDLE" state voltage in uV. See below table for bucks which support this. 0 means disabled. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3300000 rohm,dvs-suspend-voltage: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - maximum: 3300000 description: PMIC default "SUSPEND" state voltage in uV. See below table for bucks which support this. 0 means disabled. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3300000 rohm,dvs-lpsr-voltage: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - maximum: 3300000 description: PMIC default "LPSR" state voltage in uV. See below table for bucks which support this. 0 means disabled. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3300000 # Supported default DVS states: # buck | run | idle | suspend | lpsr - #-------------------------------------------------------------- + # -------------------------------------------------------------- # 1, 2, 6, and 7 | supported | supported | supported (*) - #-------------------------------------------------------------- + # -------------------------------------------------------------- # 3, 4, and 5 | supported (**) - #-------------------------------------------------------------- + # -------------------------------------------------------------- # - #(*) LPSR and SUSPEND states use same voltage but both states have own - # enable / - # disable settings. Voltage 0 can be specified for a state to make - # regulator disabled on that state. + # (*) LPSR and SUSPEND states use same voltage but both states have own + # enable / + # disable settings. Voltage 0 can be specified for a state to make + # regulator disabled on that state. # - #(**) All states use same voltage but have own enable / disable - # settings. Voltage 0 can be specified for a state to make - # regulator disabled on that state. + # (**) All states use same voltage but have own enable / disable + # settings. Voltage 0 can be specified for a state to make + # regulator disabled on that state. required: - regulator-name |