diff options
Diffstat (limited to 'Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml | 103 |
1 files changed, 59 insertions, 44 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml index 46a0478cb924..2120ef71a78d 100644 --- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml @@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: STM32 GPIO and Pin Mux/Config controller maintainers: - - Alexandre TORGUE <alexandre.torgue@st.com> + - Alexandre TORGUE <alexandre.torgue@foss.st.com> description: | STMicroelectronics's STM32 MCUs intregrate a GPIO and Pin mux/config hardware @@ -24,8 +24,11 @@ properties: - st,stm32f746-pinctrl - st,stm32f769-pinctrl - st,stm32h743-pinctrl + - st,stm32mp135-pinctrl - st,stm32mp157-pinctrl - st,stm32mp157-z-pinctrl + - st,stm32mp257-pinctrl + - st,stm32mp257-z-pinctrl '#address-cells': const: 1 @@ -33,41 +36,49 @@ properties: const: 1 ranges: true - pins-are-numbered: true + pins-are-numbered: + $ref: /schemas/types.yaml#/definitions/flag + deprecated: true hwlocks: true + interrupts: + maxItems: 1 + st,syscfg: - allOf: - - $ref: "/schemas/types.yaml#/definitions/phandle-array" - description: Should be phandle/offset/mask - - Phandle to the syscon node which includes IRQ mux selection. - - The offset of the IRQ mux selection register. - - The field mask of IRQ mux, needed if different of 0xf. + description: Phandle+args to the syscon node which includes IRQ mux selection. + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: syscon node which includes IRQ mux selection + - description: The offset of the IRQ mux selection register + - description: The field mask of IRQ mux, needed if different of 0xf st,package: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [1, 2, 4, 8] description: - Indicates the SOC package used. - More details in include/dt-bindings/pinctrl/stm32-pinfunc.h - + Indicates the SOC package used. + More details in include/dt-bindings/pinctrl/stm32-pinfunc.h + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0x1, 0x2, 0x4, 0x8, 0x100, 0x400, 0x800] patternProperties: '^gpio@[0-9a-f]*$': type: object + additionalProperties: false properties: gpio-controller: true '#gpio-cells': const: 2 + interrupt-controller: true + '#interrupt-cells': + const: 2 reg: maxItems: 1 clocks: maxItems: 1 - reset: - minItems: 1 + resets: maxItems: 1 + gpio-line-names: true gpio-ranges: minItems: 1 maxItems: 16 @@ -78,33 +89,36 @@ patternProperties: maximum: 16 st,bank-name: - allOf: - - $ref: "/schemas/types.yaml#/definitions/string" - - enum: - - GPIOA - - GPIOB - - GPIOC - - GPIOD - - GPIOE - - GPIOF - - GPIOG - - GPIOH - - GPIOI - - GPIOJ - - GPIOK - - GPIOZ description: Should be a name string for this bank as specified in the datasheet. + $ref: /schemas/types.yaml#/definitions/string + enum: + - GPIOA + - GPIOB + - GPIOC + - GPIOD + - GPIOE + - GPIOF + - GPIOG + - GPIOH + - GPIOI + - GPIOJ + - GPIOK + - GPIOZ st,bank-ioport: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - - maximum: 11 - description: Should correspond to the EXTI IOport selection (EXTI line used to select GPIOs as interrupts). + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 11 + + patternProperties: + "^(.+-hog(-[0-9]+)?)$": + type: object + required: + - gpio-hog required: - gpio-controller @@ -115,9 +129,12 @@ patternProperties: '-[0-9]*$': type: object + additionalProperties: false + patternProperties: '^pins': type: object + additionalProperties: false description: | A pinctrl node should contain at least one subnode representing the pinctrl group available on the machine. Each subnode will list the @@ -125,8 +142,7 @@ patternProperties: configuration, pullups, drive, output high/low and output speed. properties: pinmux: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32-array" + $ref: /schemas/types.yaml#/definitions/uint32-array description: | Integer array, represents gpio pin number and mux setting. Supported pin number and mux varies for different SoCs, and are @@ -180,19 +196,20 @@ patternProperties: 1: Medium speed 2: Fast speed 3: High speed - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1, 2, 3] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] required: - pinmux +allOf: + - $ref: pinctrl.yaml# + required: - compatible - '#address-cells' - '#size-cells' - ranges - - pins-are-numbered additionalProperties: false @@ -206,7 +223,6 @@ examples: #size-cells = <1>; compatible = "st,stm32f429-pinctrl"; ranges = <0 0x40020000 0x3000>; - pins-are-numbered; gpioa: gpio@0 { gpio-controller; @@ -224,7 +240,6 @@ examples: #size-cells = <1>; compatible = "st,stm32f429-pinctrl"; ranges = <0 0x50020000 0x3000>; - pins-are-numbered; gpiob: gpio@1000 { gpio-controller; |