1 files changed, 0 insertions, 101 deletions
diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt
deleted file mode 100644
index 148ef621a5e5..000000000000
--- a/Documentation/devicetree/bindings/mfd/arizona.txt
+++ /dev/null
@@ -1,101 +0,0 @@
-Cirrus Logic/Wolfson Microelectronics Arizona class audio SoCs
-
-These devices are audio SoCs with extensive digital capabilities and a range
-of analogue I/O.
-
-Required properties:
-
-  - compatible : One of the following chip-specific strings:
-        "cirrus,cs47l24"
-        "wlf,wm5102"
-        "wlf,wm5110"
-        "wlf,wm8280"
-        "wlf,wm8997"
-        "wlf,wm8998"
-        "wlf,wm1814"
-        "wlf,wm1831"
-
-  - reg : I2C slave address when connected using I2C, chip select number when
-    using SPI.
-
-  - interrupts : The interrupt line the /IRQ signal for the device is
-    connected to.
-  - interrupt-controller : Arizona class devices contain interrupt controllers
-    and may provide interrupt services to other devices.
-  - #interrupt-cells: the number of cells to describe an IRQ, this should be 2.
-    The first cell is the IRQ number.
-    The second cell is the flags, encoded as the trigger masks from
-    Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-
-  - gpio-controller : Indicates this device is a GPIO controller.
-  - #gpio-cells : Must be 2. The first cell is the pin number and the
-    second cell is used to specify optional parameters, see ../gpio/gpio.txt
-    for details.
-
-  - AVDD-supply, DBVDD1-supply, CPVDD-supply : Power supplies for the device,
-    as covered in Documentation/devicetree/bindings/regulator/regulator.txt
-
-  - DBVDD2-supply, DBVDD3-supply : Additional databus power supplies (wm5102,
-    wm5110, wm8280, wm8998, wm1814)
-
-  - SPKVDDL-supply, SPKVDDR-supply : Speaker driver power supplies (wm5102,
-    wm5110, wm8280, wm8998, wm1814)
-
-  - SPKVDD-supply : Speaker driver power supply (wm8997)
-
-  - DCVDD-supply : Main power supply (cs47l24, wm1831)
-
-  - MICVDD-supply : Microphone power supply (cs47l24, wm1831)
-
-Optional properties:
-
-  - reset-gpios : GPIO specifier for the GPIO controlling /RESET
-
-  - clocks: Should reference the clocks supplied on MCLK1 and MCLK2
-  - clock-names: Should contains two strings:
-      "mclk1" for the clock supplied on MCLK1, recommended to be a high
-      quality audio reference clock
-      "mclk2" for the clock supplied on MCLK2, recommended to be an always on
-      32k clock
-
-  - wlf,gpio-defaults : A list of GPIO configuration register values. Defines
-    for the appropriate values can found in <dt-bindings/mfd/arizona.txt>. If
-    absent, no configuration of these registers is performed. If any entry has
-    a value that is out of range for a 16 bit register then the chip default
-    will be used. If present exactly five values must be specified.
-
-  - DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if
-    they are being externally supplied. As covered in
-    Documentation/devicetree/bindings/regulator/regulator.txt
-    (wm5102, wm5110, wm8280, wm8997, wm8998, wm1814)
-
-Deprecated properties:
-
-  - wlf,reset : GPIO specifier for the GPIO controlling /RESET
-
-Also see child specific device properties:
-  Regulator - ../regulator/arizona-regulator.txt
-  Extcon    - ../extcon/extcon-arizona.txt
-  Sound     - ../sound/wlf,arizona.txt
-
-Example:
-
-codec: wm5102@1a {
-	compatible = "wlf,wm5102";
-	reg = <0x1a>;
-	interrupts = <347>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-        interrupt-parent = <&gic>;
-
-	gpio-controller;
-	#gpio-cells = <2>;
-
-	wlf,gpio-defaults = <
-		ARIZONA_GP_FN_TXLRCLK
-		ARIZONA_GP_DEFAULT
-		ARIZONA_GP_DEFAULT
-		ARIZONA_GP_DEFAULT
-		ARIZONA_GP_DEFAULT
-	>;
-};