aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml')
-rw-r--r--Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml94
1 files changed, 94 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml
new file mode 100644
index 000000000000..47cfba939ca6
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/imu/bosch,bmi160.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch BMI160
+
+maintainers:
+ - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+ Inertial Measurement Unit with Accelerometer, Gyroscope and externally
+ connectable Magnetometer
+ https://www.bosch-sensortec.com/bst/products/all_products/bmi160
+
+properties:
+ compatible:
+ const: bosch,bmi160
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-names:
+ enum:
+ - INT1
+ - INT2
+ description: |
+ set to "INT1" if INT1 pin should be used as interrupt input, set
+ to "INT2" if INT2 pin should be used instead
+
+ drive-open-drain:
+ description: |
+ set if the specified interrupt pin should be configured as
+ open drain. If not set, defaults to push-pull.
+
+ vdd-supply:
+ description: provide VDD power to the sensor.
+
+ vddio-supply:
+ description: provide VDD IO power to the sensor.
+
+ mount-matrix:
+ description: an optional 3x3 mounting rotation matrix
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ // Example for I2C
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bmi160@68 {
+ compatible = "bosch,bmi160";
+ reg = <0x68>;
+ vdd-supply = <&pm8916_l17>;
+ vddio-supply = <&pm8916_l6>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <12 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "INT1";
+ mount-matrix = "0", "1", "0",
+ "-1", "0", "0",
+ "0", "0", "1";
+ };
+ };
+ - |
+ // Example for SPI
+ #include <dt-bindings/interrupt-controller/irq.h>
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bmi160@0 {
+ compatible = "bosch,bmi160";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <12 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "INT2";
+ };
+ };