diff options
Diffstat (limited to 'Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.txt | 103 |
1 files changed, 103 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.txt b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.txt new file mode 100644 index 000000000000..6c49db7f8ad2 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.txt @@ -0,0 +1,103 @@ +Samsung Exynos Analog to Digital Converter bindings + +The devicetree bindings are for the new ADC driver written for +Exynos4 and upward SoCs from Samsung. + +New driver handles the following +1. Supports ADC IF found on EXYNOS4412/EXYNOS5250 + and future SoCs from Samsung +2. Add ADC driver under iio/adc framework +3. Also adds the Documentation for device tree bindings + +Required properties: +- compatible: Must be "samsung,exynos-adc-v1" + for exynos4412/5250 and s5pv210 controllers. + Must be "samsung,exynos-adc-v2" for + future controllers. + Must be "samsung,exynos3250-adc" for + controllers compatible with ADC of Exynos3250. + Must be "samsung,exynos7-adc" for + the ADC in Exynos7 and compatibles + Must be "samsung,s3c2410-adc" for + the ADC in s3c2410 and compatibles + Must be "samsung,s3c2416-adc" for + the ADC in s3c2416 and compatibles + Must be "samsung,s3c2440-adc" for + the ADC in s3c2440 and compatibles + Must be "samsung,s3c2443-adc" for + the ADC in s3c2443 and compatibles + Must be "samsung,s3c6410-adc" for + the ADC in s3c6410 and compatibles +- reg: List of ADC register address range + - The base address and range of ADC register + - The base address and range of ADC_PHY register (every + SoC except for s3c24xx/s3c64xx ADC) +- interrupts: Contains the interrupt information for the timer. The + format is being dependent on which interrupt controller + the Samsung device uses. +- #io-channel-cells = <1>; As ADC has multiple outputs +- clocks From common clock bindings: handles to clocks specified + in "clock-names" property, in the same order. +- clock-names From common clock bindings: list of clock input names + used by ADC block: + - "adc" : ADC bus clock + - "sclk" : ADC special clock (only for Exynos3250 and + compatible ADC block) +- vdd-supply VDD input supply. + +- samsung,syscon-phandle Contains the PMU system controller node + (To access the ADC_PHY register on Exynos5250/5420/5800/3250) +Optional properties: +- has-touchscreen: If present, indicates that a touchscreen is + connected an usable. + +Note: child nodes can be added for auto probing from device tree. + +Example: adding device info in dtsi file + +adc: adc@12d10000 { + compatible = "samsung,exynos-adc-v1"; + reg = <0x12D10000 0x100>; + interrupts = <0 106 0>; + #io-channel-cells = <1>; + io-channel-ranges; + + clocks = <&clock 303>; + clock-names = "adc"; + + vdd-supply = <&buck5_reg>; + samsung,syscon-phandle = <&pmu_system_controller>; +}; + +Example: adding device info in dtsi file for Exynos3250 with additional sclk + +adc: adc@126c0000 { + compatible = "samsung,exynos3250-adc", "samsung,exynos-adc-v2; + reg = <0x126C0000 0x100>; + interrupts = <0 137 0>; + #io-channel-cells = <1>; + io-channel-ranges; + + clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>; + clock-names = "adc", "sclk"; + + vdd-supply = <&buck5_reg>; + samsung,syscon-phandle = <&pmu_system_controller>; +}; + +Example: Adding child nodes in dts file + +adc@12d10000 { + + /* NTC thermistor is a hwmon device */ + ncp15wb473@0 { + compatible = "murata,ncp15wb473"; + pullup-uv = <1800000>; + pullup-ohm = <47000>; + pulldown-ohm = <0>; + io-channels = <&adc 4>; + }; +}; + +Note: Does not apply to ADC driver under arch/arm/plat-samsung/ +Note: The child node can be added under the adc node or separately. |