diff options
Diffstat (limited to 'Documentation/devicetree/bindings/hwmon/pwm-fan.txt')
-rw-r--r-- | Documentation/devicetree/bindings/hwmon/pwm-fan.txt | 24 |
1 files changed, 22 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt index c6d533202d3e..41b76762953a 100644 --- a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt +++ b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt @@ -6,11 +6,21 @@ Required properties: - cooling-levels : PWM duty cycle values in a range from 0 to 255 which correspond to thermal cooling states +Optional properties: +- fan-supply : phandle to the regulator that provides power to the fan +- interrupts : This contains a single interrupt specifier which + describes the tachometer output of the fan as an + interrupt source. The output signal must generate a + defined number of interrupts per fan revolution, which + require that it must be self resetting edge interrupts. + See interrupt-controller/interrupts.txt for the format. +- pulses-per-revolution : define the tachometer pulses per fan revolution as + an integer (default is 2 interrupts per revolution). + The value must be greater than zero. + Example: fan0: pwm-fan { compatible = "pwm-fan"; - cooling-min-state = <0>; - cooling-max-state = <3>; #cooling-cells = <2>; pwms = <&pwm 0 10000 0>; cooling-levels = <0 102 170 230>; @@ -35,3 +45,13 @@ Example: }; }; }; + +Example 2: + fan0: pwm-fan { + compatible = "pwm-fan"; + pwms = <&pwm 0 40000 0>; + fan-supply = <®_fan>; + interrupt-parent = <&gpio5>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + pulses-per-revolution = <2>; + }; |