diff options
Diffstat (limited to 'Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt | 46 |
1 files changed, 35 insertions, 11 deletions
diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt index f8773ecb7525..f426bdb42f18 100644 --- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt +++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt @@ -78,6 +78,8 @@ Required properties: - compatible: value must be one of: * "allwinner,sun8i-a83t-dw-hdmi" + * "allwinner,sun50i-a64-dw-hdmi", "allwinner,sun8i-a83t-dw-hdmi" + * "allwinner,sun50i-h6-dw-hdmi" - reg: base address and size of memory-mapped region - reg-io-width: See dw_hdmi.txt. Shall be 1. - interrupts: HDMI interrupt number @@ -85,9 +87,14 @@ Required properties: * iahb: the HDMI bus clock * isfr: the HDMI register clock * tmds: TMDS clock + * cec: HDMI CEC clock (H6 only) + * hdcp: HDCP clock (H6 only) + * hdcp-bus: HDCP bus clock (H6 only) - clock-names: the clock names mentioned above - - resets: phandle to the reset controller - - reset-names: must be "ctrl" + - resets: + * ctrl: HDMI controller reset + * hdcp: HDCP reset (H6 only) + - reset-names: reset names mentioned above - phys: phandle to the DWC HDMI PHY - phy-names: must be "phy" @@ -96,6 +103,9 @@ Required properties: first port should be the input endpoint. The second should be the output, usually to an HDMI connector. +Optional properties: + - hvcc-supply: the VCC power supply of the controller + DWC HDMI PHY ------------ @@ -103,7 +113,9 @@ Required properties: - compatible: value must be one of: * allwinner,sun8i-a83t-hdmi-phy * allwinner,sun8i-h3-hdmi-phy + * allwinner,sun8i-r40-hdmi-phy * allwinner,sun50i-a64-hdmi-phy + * allwinner,sun50i-h6-hdmi-phy - reg: base address and size of memory-mapped region - clocks: phandles to the clocks feeding the HDMI PHY * bus: the HDMI PHY interface clock @@ -112,9 +124,9 @@ Required properties: - resets: phandle to the reset controller driving the PHY - reset-names: must be "phy" -H3 and A64 HDMI PHY require additional clocks: +H3, A64 and R40 HDMI PHY require additional clocks: - pll-0: parent of phy clock - - pll-1: second possible phy clock parent (A64 only) + - pll-1: second possible phy clock parent (A64/R40 only) TV Encoder ---------- @@ -151,6 +163,9 @@ Required properties: * allwinner,sun8i-v3s-tcon * allwinner,sun9i-a80-tcon-lcd * allwinner,sun9i-a80-tcon-tv + * "allwinner,sun50i-a64-tcon-lcd", "allwinner,sun8i-a83t-tcon-lcd" + * "allwinner,sun50i-a64-tcon-tv", "allwinner,sun8i-a83t-tcon-tv" + * allwinner,sun50i-h6-tcon-tv, allwinner,sun8i-r40-tcon-tv - reg: base address and size of memory-mapped region - interrupts: interrupt associated to this IP - clocks: phandles to the clocks feeding the TCON. @@ -213,24 +228,26 @@ It allows display pipeline to be configured in very different ways: \ [3] TCON-TV1 [1] - TVE1/RGB Note that both TCON TOP references same physical unit. Both mixers can be -connected to any TCON. +connected to any TCON. Not all TCON TOP variants support all features. Required properties: - compatible: value must be one of: * allwinner,sun8i-r40-tcon-top + * allwinner,sun50i-h6-tcon-top - reg: base address and size of the memory-mapped region. - clocks: phandle to the clocks feeding the TCON TOP * bus: TCON TOP interface clock * tcon-tv0: TCON TV0 clock - * tve0: TVE0 clock - * tcon-tv1: TCON TV1 clock - * tve1: TVE0 clock - * dsi: MIPI DSI clock + * tve0: TVE0 clock (R40 only) + * tcon-tv1: TCON TV1 clock (R40 only) + * tve1: TVE0 clock (R40 only) + * dsi: MIPI DSI clock (R40 only) - clock-names: clock name mentioned above - resets: phandle to the reset line driving the TCON TOP - #clock-cells : must contain 1 - clock-output-names: Names of clocks created for TCON TV0 channel clock, - TCON TV1 channel clock and DSI channel clock, in that order. + TCON TV1 channel clock (R40 only) and DSI channel clock (R40 only), in + that order. - ports: A ports node with endpoint definitions as defined in Documentation/devicetree/bindings/media/video-interfaces.txt. 6 ports should @@ -369,7 +386,12 @@ Required properties: * allwinner,sun8i-a83t-de2-mixer-0 * allwinner,sun8i-a83t-de2-mixer-1 * allwinner,sun8i-h3-de2-mixer-0 + * allwinner,sun8i-r40-de2-mixer-0 + * allwinner,sun8i-r40-de2-mixer-1 * allwinner,sun8i-v3s-de2-mixer + * allwinner,sun50i-a64-de2-mixer-0 + * allwinner,sun50i-a64-de2-mixer-1 + * allwinner,sun50i-h6-de3-mixer-0 - reg: base address and size of the memory-mapped region. - clocks: phandles to the clocks feeding the mixer * bus: the mixer interface clock @@ -403,9 +425,11 @@ Required properties: * allwinner,sun8i-r40-display-engine * allwinner,sun8i-v3s-display-engine * allwinner,sun9i-a80-display-engine + * allwinner,sun50i-a64-display-engine + * allwinner,sun50i-h6-display-engine - allwinner,pipelines: list of phandle to the display engine - frontends (DE 1.0) or mixers (DE 2.0) available. + frontends (DE 1.0) or mixers (DE 2.0/3.0) available. Example: |