diff options
Diffstat (limited to 'Documentation/devicetree/bindings/arm/coresight.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/arm/coresight.txt | 204 |
1 files changed, 204 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt new file mode 100644 index 000000000000..d790f49066f3 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/coresight.txt @@ -0,0 +1,204 @@ +* CoreSight Components: + +CoreSight components are compliant with the ARM CoreSight architecture +specification and can be connected in various topologies to suit a particular +SoCs tracing needs. These trace components can generally be classified as +sinks, links and sources. Trace data produced by one or more sources flows +through the intermediate links connecting the source to the currently selected +sink. Each CoreSight component device should use these properties to describe +its hardware characteristcs. + +* Required properties for all components *except* non-configurable replicators: + + * compatible: These have to be supplemented with "arm,primecell" as + drivers are using the AMBA bus interface. Possible values include: + - "arm,coresight-etb10", "arm,primecell"; + - "arm,coresight-tpiu", "arm,primecell"; + - "arm,coresight-tmc", "arm,primecell"; + - "arm,coresight-funnel", "arm,primecell"; + - "arm,coresight-etm3x", "arm,primecell"; + + * reg: physical base address and length of the register + set(s) of the component. + + * clocks: the clock associated to this component. + + * clock-names: the name of the clock as referenced by the code. + Since we are using the AMBA framework, the name should be + "apb_pclk". + + * port or ports: The representation of the component's port + layout using the generic DT graph presentation found in + "bindings/graph.txt". + +* Required properties for devices that don't show up on the AMBA bus, such as + non-configurable replicators: + + * compatible: Currently supported value is (note the absence of the + AMBA markee): + - "arm,coresight-replicator" + + * id: a unique number that will identify this replicator. + + * port or ports: same as above. + +* Optional properties for ETM/PTMs: + + * arm,cp14: must be present if the system accesses ETM/PTM management + registers via co-processor 14. + + * cpu: the cpu phandle this ETM/PTM is affined to. When omitted the + source is considered to belong to CPU0. + +* Optional property for TMC: + + * arm,buffer-size: size of contiguous buffer space for TMC ETR + (embedded trace router) + + +Example: + +1. Sinks + etb@20010000 { + compatible = "arm,coresight-etb10", "arm,primecell"; + reg = <0 0x20010000 0 0x1000>; + + coresight-default-sink; + clocks = <&oscclk6a>; + clock-names = "apb_pclk"; + port { + etb_in_port: endpoint@0 { + slave-mode; + remote-endpoint = <&replicator_out_port0>; + }; + }; + }; + + tpiu@20030000 { + compatible = "arm,coresight-tpiu", "arm,primecell"; + reg = <0 0x20030000 0 0x1000>; + + clocks = <&oscclk6a>; + clock-names = "apb_pclk"; + port { + tpiu_in_port: endpoint@0 { + slave-mode; + remote-endpoint = <&replicator_out_port1>; + }; + }; + }; + +2. Links + replicator { + /* non-configurable replicators don't show up on the + * AMBA bus. As such no need to add "arm,primecell". + */ + compatible = "arm,coresight-replicator"; + /* this will show up in debugfs as "0.replicator" */ + id = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* replicator output ports */ + port@0 { + reg = <0>; + replicator_out_port0: endpoint { + remote-endpoint = <&etb_in_port>; + }; + }; + + port@1 { + reg = <1>; + replicator_out_port1: endpoint { + remote-endpoint = <&tpiu_in_port>; + }; + }; + + /* replicator input port */ + port@2 { + reg = <0>; + replicator_in_port0: endpoint { + slave-mode; + remote-endpoint = <&funnel_out_port0>; + }; + }; + }; + }; + + funnel@20040000 { + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0 0x20040000 0 0x1000>; + + clocks = <&oscclk6a>; + clock-names = "apb_pclk"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* funnel output port */ + port@0 { + reg = <0>; + funnel_out_port0: endpoint { + remote-endpoint = + <&replicator_in_port0>; + }; + }; + + /* funnel input ports */ + port@1 { + reg = <0>; + funnel_in_port0: endpoint { + slave-mode; + remote-endpoint = <&ptm0_out_port>; + }; + }; + + port@2 { + reg = <1>; + funnel_in_port1: endpoint { + slave-mode; + remote-endpoint = <&ptm1_out_port>; + }; + }; + + port@3 { + reg = <2>; + funnel_in_port2: endpoint { + slave-mode; + remote-endpoint = <&etm0_out_port>; + }; + }; + + }; + }; + +3. Sources + ptm@2201c000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0 0x2201c000 0 0x1000>; + + cpu = <&cpu0>; + clocks = <&oscclk6a>; + clock-names = "apb_pclk"; + port { + ptm0_out_port: endpoint { + remote-endpoint = <&funnel_in_port0>; + }; + }; + }; + + ptm@2201d000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0 0x2201d000 0 0x1000>; + + cpu = <&cpu1>; + clocks = <&oscclk6a>; + clock-names = "apb_pclk"; + port { + ptm1_out_port: endpoint { + remote-endpoint = <&funnel_in_port1>; + }; + }; + }; |