aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings')
-rw-r--r--Documentation/devicetree/bindings/arm/amlogic.yaml9
-rw-r--r--Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml18
-rw-r--r--Documentation/devicetree/bindings/arm/arm,coresight-dummy-sink.yaml73
-rw-r--r--Documentation/devicetree/bindings/arm/arm,coresight-dummy-source.yaml71
-rw-r--r--Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml10
-rw-r--r--Documentation/devicetree/bindings/arm/atmel-sysregs.txt94
-rw-r--r--Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml14
-rw-r--r--Documentation/devicetree/bindings/arm/cpus.yaml19
-rw-r--r--Documentation/devicetree/bindings/arm/fsl.yaml14
-rw-r--r--Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml8
-rw-r--r--Documentation/devicetree/bindings/arm/nuvoton/nuvoton,ma35d1.yaml30
-rw-r--r--Documentation/devicetree/bindings/arm/nuvoton/nuvoton,npcm.yaml (renamed from Documentation/devicetree/bindings/arm/npcm/npcm.yaml)2
-rw-r--r--Documentation/devicetree/bindings/arm/psci.yaml2
-rw-r--r--Documentation/devicetree/bindings/arm/qcom.yaml30
-rw-r--r--Documentation/devicetree/bindings/arm/rockchip.yaml24
-rw-r--r--Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml10
-rw-r--r--Documentation/devicetree/bindings/arm/socionext/synquacer.yaml28
-rw-r--r--Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml7
-rw-r--r--Documentation/devicetree/bindings/arm/stm32/stm32.yaml12
-rw-r--r--Documentation/devicetree/bindings/arm/sunxi.yaml6
-rw-r--r--Documentation/devicetree/bindings/arm/tegra.yaml14
-rw-r--r--Documentation/devicetree/bindings/arm/ti/k3.yaml26
-rw-r--r--Documentation/devicetree/bindings/arm/xen.txt2
-rw-r--r--Documentation/devicetree/bindings/arm/xilinx.yaml8
-rw-r--r--Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml2
-rw-r--r--Documentation/devicetree/bindings/ata/rockchip,dwc-ahci.yaml124
-rw-r--r--Documentation/devicetree/bindings/ata/snps,dwc-ahci-common.yaml8
-rw-r--r--Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml13
-rw-r--r--Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml1
-rw-r--r--Documentation/devicetree/bindings/bus/ti-sysc.yaml2
-rw-r--r--Documentation/devicetree/bindings/clock/amlogic,a1-peripherals-clkc.yaml73
-rw-r--r--Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml59
-rw-r--r--Documentation/devicetree/bindings/clock/at91-clock.txt58
-rw-r--r--Documentation/devicetree/bindings/clock/atmel,at91rm9200-pmc.yaml154
-rw-r--r--Documentation/devicetree/bindings/clock/atmel,at91sam9x5-sckc.yaml70
-rw-r--r--Documentation/devicetree/bindings/clock/brcm,bcm63268-timer-clocks.yaml2
-rw-r--r--Documentation/devicetree/bindings/clock/imx8m-clock.yaml3
-rw-r--r--Documentation/devicetree/bindings/clock/imx8mp-audiomix.yaml2
-rw-r--r--Documentation/devicetree/bindings/clock/ingenic,cgu.yaml4
-rw-r--r--Documentation/devicetree/bindings/clock/mediatek,mtmips-sysc.yaml64
-rw-r--r--Documentation/devicetree/bindings/clock/nuvoton,ma35d1-clk.yaml63
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,a53pll.yaml1
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,gcc-msm8953.yaml73
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml1
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml7
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml7
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml5
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,gpucc.yaml3
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,ipq9574-gcc.yaml1
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,mmcc.yaml32
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml1
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,sc8280xp-lpasscc.yaml60
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,sdx75-gcc.yaml65
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,sm6375-gpucc.yaml15
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml68
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,sm8450-gpucc.yaml75
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml79
-rw-r--r--Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml2
-rw-r--r--Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml1
-rw-r--r--Documentation/devicetree/bindings/clock/ti,am62-audio-refclk.yaml43
-rw-r--r--Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml5
-rw-r--r--Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml2
-rw-r--r--Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml6
-rw-r--r--Documentation/devicetree/bindings/connector/usb-connector.yaml20
-rw-r--r--Documentation/devicetree/bindings/cpu/idle-states.yaml2
-rw-r--r--Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml1
-rw-r--r--Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml4
-rw-r--r--Documentation/devicetree/bindings/crypto/fsl,sec-v4.0-mon.yaml6
-rw-r--r--Documentation/devicetree/bindings/crypto/fsl-dcp.yaml12
-rw-r--r--Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml6
-rw-r--r--Documentation/devicetree/bindings/crypto/qcom-qce.yaml50
-rw-r--r--Documentation/devicetree/bindings/crypto/starfive,jh7110-crypto.yaml70
-rw-r--r--Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.yaml4
-rw-r--r--Documentation/devicetree/bindings/display/amlogic,meson-g12a-dw-mipi-dsi.yaml118
-rw-r--r--Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml5
-rw-r--r--Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml1
-rw-r--r--Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml5
-rw-r--r--Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml1
-rw-r--r--Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml35
-rw-r--r--Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml3
-rw-r--r--Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml14
-rw-r--r--Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml3
-rw-r--r--Documentation/devicetree/bindings/display/fsl,lcdif.yaml7
-rw-r--r--Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml1
-rw-r--r--Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml1
-rw-r--r--Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml23
-rw-r--r--Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml19
-rw-r--r--Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml4
-rw-r--r--Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml3
-rw-r--r--Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml3
-rw-r--r--Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml4
-rw-r--r--Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml4
-rw-r--r--Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml3
-rw-r--r--Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml3
-rw-r--r--Documentation/devicetree/bindings/display/mediatek/mediatek,wdma.yaml3
-rw-r--r--Documentation/devicetree/bindings/display/msm/dp-controller.yaml1
-rw-r--r--Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml6
-rw-r--r--Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml3
-rw-r--r--Documentation/devicetree/bindings/display/msm/gmu.yaml53
-rw-r--r--Documentation/devicetree/bindings/display/msm/gpu.yaml61
-rw-r--r--Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml1
-rw-r--r--Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml1
-rw-r--r--Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml23
-rw-r--r--Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml213
-rw-r--r--Documentation/devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml215
-rw-r--r--Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml2
-rw-r--r--Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml4
-rw-r--r--Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml16
-rw-r--r--Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml3
-rw-r--r--Documentation/devicetree/bindings/display/panel/panel-simple.yaml8
-rw-r--r--Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml2
-rw-r--r--Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml70
-rw-r--r--Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml2
-rw-r--r--Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml4
-rw-r--r--Documentation/devicetree/bindings/display/st,stm32-dsi.yaml2
-rw-r--r--Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vi.yaml59
-rw-r--r--Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vip.yaml41
-rw-r--r--Documentation/devicetree/bindings/dma/stericsson,dma40.yaml36
-rw-r--r--Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml30
-rw-r--r--Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml6
-rw-r--r--Documentation/devicetree/bindings/dvfs/performance-domain.yaml2
-rw-r--r--Documentation/devicetree/bindings/eeprom/at25.yaml1
-rw-r--r--Documentation/devicetree/bindings/example-schema.yaml6
-rw-r--r--Documentation/devicetree/bindings/extcon/maxim,max77843.yaml1
-rw-r--r--Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml14
-rw-r--r--Documentation/devicetree/bindings/extcon/wlf,arizona.yaml14
-rw-r--r--Documentation/devicetree/bindings/firmware/arm,scmi.yaml10
-rw-r--r--Documentation/devicetree/bindings/firmware/brcm,kona-smc.yaml39
-rw-r--r--Documentation/devicetree/bindings/firmware/qcom,scm.yaml1
-rw-r--r--Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml2
-rw-r--r--Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.yaml2
-rw-r--r--Documentation/devicetree/bindings/fpga/xlnx,versal-fpga.yaml2
-rw-r--r--Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.yaml2
-rw-r--r--Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml (renamed from Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml)18
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio-delay.yaml79
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio-ep9301.yaml154
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio-mmio.yaml117
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml4
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio-stmpe.txt17
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio-vf610.yaml7
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio-zynq.yaml2
-rw-r--r--Documentation/devicetree/bindings/gpio/ni,169445-nand-gpio.txt38
-rw-r--r--Documentation/devicetree/bindings/gpio/st,stmpe-gpio.yaml53
-rw-r--r--Documentation/devicetree/bindings/gpio/wd,mbl-gpio.txt38
-rw-r--r--Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml1
-rw-r--r--Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml2
-rw-r--r--Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml2
-rw-r--r--Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml2
-rw-r--r--Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml2
-rw-r--r--Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml1
-rw-r--r--Documentation/devicetree/bindings/hwmon/adi,max31827.yaml54
-rw-r--r--Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml6
-rw-r--r--Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml2
-rw-r--r--Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml2
-rw-r--r--Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml5
-rw-r--r--Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml1
-rw-r--r--Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml28
-rw-r--r--Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml1
-rw-r--r--Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml2
-rw-r--r--Documentation/devicetree/bindings/iio/addac/adi,ad74115.yaml3
-rw-r--r--Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml2
-rw-r--r--Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml3
-rw-r--r--Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml1
-rw-r--r--Documentation/devicetree/bindings/iio/light/rohm,bu27008.yaml49
-rw-r--r--Documentation/devicetree/bindings/iio/light/ti,opt4001.yaml68
-rw-r--r--Documentation/devicetree/bindings/iio/potentiometer/renesas,x9250.yaml78
-rw-r--r--Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml104
-rw-r--r--Documentation/devicetree/bindings/iio/st,st-sensors.yaml1
-rw-r--r--Documentation/devicetree/bindings/iio/temperature/melexis,mlx90614.yaml6
-rw-r--r--Documentation/devicetree/bindings/iio/temperature/ti,tmp006.yaml42
-rw-r--r--Documentation/devicetree/bindings/input/atmel,maxtouch.yaml7
-rw-r--r--Documentation/devicetree/bindings/input/cypress,cyapa.txt42
-rw-r--r--Documentation/devicetree/bindings/input/cypress,cyapa.yaml49
-rw-r--r--Documentation/devicetree/bindings/input/goodix,gt7375p.yaml9
-rw-r--r--Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml2
-rw-r--r--Documentation/devicetree/bindings/input/pwm-vibrator.yaml2
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml2
-rw-r--r--Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml2
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt38
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml72
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/loongson,eiointc.yaml59
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/microchip,sama7g5-eic.yaml (renamed from Documentation/devicetree/bindings/interrupt-controller/microchip,eic.yaml)2
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/ralink,rt2880-intc.yaml54
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml3
-rw-r--r--Documentation/devicetree/bindings/iommu/arm,smmu.yaml12
-rw-r--r--Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml126
-rw-r--r--Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml30
-rw-r--r--Documentation/devicetree/bindings/leds/backlight/lp855x-backlight.yaml149
-rw-r--r--Documentation/devicetree/bindings/leds/backlight/lp855x.txt72
-rw-r--r--Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml1
-rw-r--r--Documentation/devicetree/bindings/leds/common.yaml2
-rw-r--r--Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml2
-rw-r--r--Documentation/devicetree/bindings/leds/leds-lp55xx.yaml10
-rw-r--r--Documentation/devicetree/bindings/leds/leds-mt6323.txt5
-rw-r--r--Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml30
-rw-r--r--Documentation/devicetree/bindings/leds/leds-sgm3140.yaml1
-rw-r--r--Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml2
-rw-r--r--Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml2
-rw-r--r--Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.txt26
-rw-r--r--Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.yaml40
-rw-r--r--Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.yaml1
-rw-r--r--Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml1
-rw-r--r--Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml2
-rw-r--r--Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml7
-rw-r--r--Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml2
-rw-r--r--Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml2
-rw-r--r--Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml2
-rw-r--r--Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml2
-rw-r--r--Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml4
-rw-r--r--Documentation/devicetree/bindings/media/renesas,vin.yaml4
-rw-r--r--Documentation/devicetree/bindings/media/rockchip-rga.yaml4
-rw-r--r--Documentation/devicetree/bindings/media/rockchip-vpu.yaml1
-rw-r--r--Documentation/devicetree/bindings/media/s5p-mfc.txt78
-rw-r--r--Documentation/devicetree/bindings/media/samsung,s5p-mfc.yaml184
-rw-r--r--Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml2
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/nuvoton,npcm-memory-controller.yaml50
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml2
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/snps,dw-umctl2-ddrc.yaml3
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml2
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/xlnx,zynq-ddrc-a05.yaml3
-rw-r--r--Documentation/devicetree/bindings/mfd/adi,max77541.yaml68
-rw-r--r--Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml4
-rw-r--r--Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml4
-rw-r--r--Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml4
-rw-r--r--Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml4
-rw-r--r--Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml4
-rw-r--r--Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml4
-rw-r--r--Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml10
-rw-r--r--Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml6
-rw-r--r--Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml1
-rw-r--r--Documentation/devicetree/bindings/mfd/richtek,rt5033.yaml138
-rw-r--r--Documentation/devicetree/bindings/mfd/rockchip,rk806.yaml406
-rw-r--r--Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml25
-rw-r--r--Documentation/devicetree/bindings/mfd/st,stpmic1.yaml2
-rw-r--r--Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml2
-rw-r--r--Documentation/devicetree/bindings/mfd/ti,tps6594.yaml193
-rw-r--r--Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml1
-rw-r--r--Documentation/devicetree/bindings/mips/ralink.yaml1
-rw-r--r--Documentation/devicetree/bindings/misc/brcm,kona-smc.txt15
-rw-r--r--Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml6
-rw-r--r--Documentation/devicetree/bindings/misc/ti,j721e-esm.yaml53
-rw-r--r--Documentation/devicetree/bindings/mmc/arm,pl18x.yaml7
-rw-r--r--Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.txt23
-rw-r--r--Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.yaml54
-rw-r--r--Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.txt21
-rw-r--r--Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.yaml48
-rw-r--r--Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml1
-rw-r--r--Documentation/devicetree/bindings/mmc/sdhci-msm.yaml3
-rw-r--r--Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml5
-rw-r--r--Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml10
-rw-r--r--Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml3
-rw-r--r--Documentation/devicetree/bindings/mtd/denali,nand.yaml9
-rw-r--r--Documentation/devicetree/bindings/mtd/ingenic,nand.yaml4
-rw-r--r--Documentation/devicetree/bindings/mtd/intel,lgm-ebunand.yaml5
-rw-r--r--Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml226
-rw-r--r--Documentation/devicetree/bindings/mtd/marvell-nand.txt126
-rw-r--r--Documentation/devicetree/bindings/mtd/mediatek,mtk-nfc.yaml3
-rw-r--r--Documentation/devicetree/bindings/mtd/mtd-physmap.yaml2
-rw-r--r--Documentation/devicetree/bindings/mtd/mtd.yaml2
-rw-r--r--Documentation/devicetree/bindings/mtd/nand-controller.yaml85
-rw-r--r--Documentation/devicetree/bindings/mtd/partitions/partition.yaml1
-rw-r--r--Documentation/devicetree/bindings/mtd/partitions/partitions.yaml1
-rw-r--r--Documentation/devicetree/bindings/mtd/qcom,nandc.yaml45
-rw-r--r--Documentation/devicetree/bindings/mtd/raw-nand-chip.yaml111
-rw-r--r--Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml3
-rw-r--r--Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml3
-rw-r--r--Documentation/devicetree/bindings/mtd/ti,am654-hbmc.yaml2
-rw-r--r--Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml2
-rw-r--r--Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml2
-rw-r--r--Documentation/devicetree/bindings/net/altr,tse.yaml4
-rw-r--r--Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml2
-rw-r--r--Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml5
-rw-r--r--Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml5
-rw-r--r--Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml2
-rw-r--r--Documentation/devicetree/bindings/net/cdns,macb.yaml11
-rw-r--r--Documentation/devicetree/bindings/net/dsa/marvell.txt2
-rw-r--r--Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml32
-rw-r--r--Documentation/devicetree/bindings/net/ethernet-phy.yaml6
-rw-r--r--Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml2
-rw-r--r--Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml11
-rw-r--r--Documentation/devicetree/bindings/net/mediatek,net.yaml7
-rw-r--r--Documentation/devicetree/bindings/net/mediatek-dwmac.yaml4
-rw-r--r--Documentation/devicetree/bindings/net/micrel,ks8851.yaml3
-rw-r--r--Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml2
-rw-r--r--Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml2
-rw-r--r--Documentation/devicetree/bindings/net/qcom,ethqos.yaml12
-rw-r--r--Documentation/devicetree/bindings/net/rockchip-dwmac.yaml12
-rw-r--r--Documentation/devicetree/bindings/net/snps,dwmac.yaml3
-rw-r--r--Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml4
-rw-r--r--Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml2
-rw-r--r--Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml6
-rw-r--r--Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml4
-rw-r--r--Documentation/devicetree/bindings/net/xilinx_axienet.txt101
-rw-r--r--Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml183
-rw-r--r--Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml15
-rw-r--r--Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml26
-rw-r--r--Documentation/devicetree/bindings/nvmem/layouts/fixed-cell.yaml31
-rw-r--r--Documentation/devicetree/bindings/nvmem/layouts/fixed-layout.yaml50
-rw-r--r--Documentation/devicetree/bindings/nvmem/layouts/nvmem-layout.yaml5
-rw-r--r--Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml1
-rw-r--r--Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml8
-rw-r--r--Documentation/devicetree/bindings/nvmem/nvmem.yaml61
-rw-r--r--Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml9
-rw-r--r--Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml6
-rw-r--r--Documentation/devicetree/bindings/nvmem/rmem.yaml1
-rw-r--r--Documentation/devicetree/bindings/nvmem/rockchip,otp.yaml122
-rw-r--r--Documentation/devicetree/bindings/nvmem/rockchip-otp.txt25
-rw-r--r--Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml3
-rw-r--r--Documentation/devicetree/bindings/nvmem/sunplus,sp7021-ocotp.yaml6
-rw-r--r--Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml10
-rw-r--r--Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-ep.yaml4
-rw-r--r--Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml16
-rw-r--r--Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml2
-rw-r--r--Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml4
-rw-r--r--Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml3
-rw-r--r--Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml4
-rw-r--r--Documentation/devicetree/bindings/phy/brcm,kona-usb2-phy.txt15
-rw-r--r--Documentation/devicetree/bindings/phy/brcm,kona-usb2-phy.yaml36
-rw-r--r--Documentation/devicetree/bindings/phy/cdns,salvo-phy.yaml6
-rw-r--r--Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml47
-rw-r--r--Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml128
-rw-r--r--Documentation/devicetree/bindings/phy/intel,combo-phy.yaml2
-rw-r--r--Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml6
-rw-r--r--Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.yaml9
-rw-r--r--Documentation/devicetree/bindings/phy/mxs-usb-phy.txt33
-rw-r--r--Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml34
-rw-r--r--Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml3
-rw-r--r--Documentation/devicetree/bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml2
-rw-r--r--Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-ufs-phy.yaml18
-rw-r--r--Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-usb3-phy.yaml27
-rw-r--r--Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml3
-rw-r--r--Documentation/devicetree/bindings/phy/qcom,sa8775p-dwmac-sgmii-phy.yaml55
-rw-r--r--Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml6
-rw-r--r--Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml4
-rw-r--r--Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml65
-rw-r--r--Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml51
-rw-r--r--Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml5
-rw-r--r--Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml1
-rw-r--r--Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt3
-rw-r--r--Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml78
-rw-r--r--Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-common.yaml66
-rw-r--r--Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux.yaml139
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-tlmm.yaml127
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml11
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml3
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml11
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml2
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml12
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml2
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,sdx75-tlmm.yaml137
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,sm7150-tlmm.yaml11
-rw-r--r--Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml4
-rw-r--r--Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml2
-rw-r--r--Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml3
-rw-r--r--Documentation/devicetree/bindings/power/qcom,kpss-acc-v2.yaml1
-rw-r--r--Documentation/devicetree/bindings/power/reset/atmel,at91sam9260-shdwc.yaml82
-rw-r--r--Documentation/devicetree/bindings/power/reset/atmel,sama5d2-shdwc.yaml114
-rw-r--r--Documentation/devicetree/bindings/power/reset/brcm,bcm21664-resetmgr.txt14
-rw-r--r--Documentation/devicetree/bindings/power/reset/brcm,bcm21664-resetmgr.yaml31
-rw-r--r--Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.txt26
-rw-r--r--Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.yaml52
-rw-r--r--Documentation/devicetree/bindings/power/reset/qcom,pon.yaml20
-rw-r--r--Documentation/devicetree/bindings/power/reset/restart-handler.yaml2
-rw-r--r--Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.yaml2
-rw-r--r--Documentation/devicetree/bindings/power/supply/bq256xx.yaml18
-rw-r--r--Documentation/devicetree/bindings/power/supply/qcom,pmi8998-charger.yaml82
-rw-r--r--Documentation/devicetree/bindings/power/supply/richtek,rt5033-battery.yaml2
-rw-r--r--Documentation/devicetree/bindings/power/supply/richtek,rt5033-charger.yaml65
-rw-r--r--Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml1
-rw-r--r--Documentation/devicetree/bindings/pwm/atmel,at91sam-pwm.yaml2
-rw-r--r--Documentation/devicetree/bindings/pwm/imx-pwm.yaml4
-rw-r--r--Documentation/devicetree/bindings/pwm/mediatek,mt2712-pwm.yaml1
-rw-r--r--Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml4
-rw-r--r--Documentation/devicetree/bindings/pwm/mxs-pwm.yaml2
-rw-r--r--Documentation/devicetree/bindings/pwm/pwm-bcm2835.txt30
-rw-r--r--Documentation/devicetree/bindings/pwm/pwm-bcm2835.yaml43
-rw-r--r--Documentation/devicetree/bindings/pwm/pwm.yaml2
-rw-r--r--Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml1
-rw-r--r--Documentation/devicetree/bindings/regulator/adi,max77541-regulator.yaml38
-rw-r--r--Documentation/devicetree/bindings/regulator/mt6358-regulator.txt34
-rw-r--r--Documentation/devicetree/bindings/regulator/pfuze100.yaml3
-rw-r--r--Documentation/devicetree/bindings/regulator/pwm-regulator.yaml1
-rw-r--r--Documentation/devicetree/bindings/regulator/qcom,rpm-regulator.yaml2
-rw-r--r--Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml10
-rw-r--r--Documentation/devicetree/bindings/regulator/renesas,raa215300.yaml85
-rw-r--r--Documentation/devicetree/bindings/regulator/ti,tps62870.yaml52
-rw-r--r--Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml2
-rw-r--r--Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml44
-rw-r--r--Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml2
-rw-r--r--Documentation/devicetree/bindings/reserved-memory/framebuffer.yaml2
-rw-r--r--Documentation/devicetree/bindings/reset/nuvoton,ma35d1-reset.yaml45
-rw-r--r--Documentation/devicetree/bindings/reset/oxnas,reset.txt32
-rw-r--r--Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt55
-rw-r--r--Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.yaml52
-rw-r--r--Documentation/devicetree/bindings/riscv/cpus.yaml55
-rw-r--r--Documentation/devicetree/bindings/riscv/extensions.yaml250
-rw-r--r--Documentation/devicetree/bindings/riscv/thead.yaml29
-rw-r--r--Documentation/devicetree/bindings/rtc/isil,isl1208.txt38
-rw-r--r--Documentation/devicetree/bindings/rtc/isil,isl1208.yaml100
-rw-r--r--Documentation/devicetree/bindings/rtc/loongson,rtc.yaml57
-rw-r--r--Documentation/devicetree/bindings/rtc/rtc.yaml2
-rw-r--r--Documentation/devicetree/bindings/rtc/trivial-rtc.yaml2
-rw-r--r--Documentation/devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml2
-rw-r--r--Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml4
-rw-r--r--Documentation/devicetree/bindings/serial/cavium-uart.txt19
-rw-r--r--Documentation/devicetree/bindings/serial/cdns,uart.yaml2
-rw-r--r--Documentation/devicetree/bindings/serial/nuvoton,ma35d1-serial.yaml48
-rw-r--r--Documentation/devicetree/bindings/serial/nxp,lpc1850-uart.txt28
-rw-r--r--Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt46
-rw-r--r--Documentation/devicetree/bindings/slimbus/slimbus.yaml2
-rw-r--r--Documentation/devicetree/bindings/soc/bcm/brcm,bcm23550-cdc.yaml35
-rw-r--r--Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml1
-rw-r--r--Documentation/devicetree/bindings/soc/nuvoton/nuvoton,npcm-gcr.yaml (renamed from Documentation/devicetree/bindings/arm/npcm/nuvoton,gcr.yaml)2
-rw-r--r--Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml1
-rw-r--r--Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml4
-rw-r--r--Documentation/devicetree/bindings/soc/qcom/qcom,rpm-master-stats.yaml69
-rw-r--r--Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml2
-rw-r--r--Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml1
-rw-r--r--Documentation/devicetree/bindings/soc/qcom/qcom-stats.yaml2
-rw-r--r--Documentation/devicetree/bindings/soc/rockchip/grf.yaml15
-rw-r--r--Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml5
-rw-r--r--Documentation/devicetree/bindings/sound/adi,max98388.yaml79
-rw-r--r--Documentation/devicetree/bindings/sound/adi,ssm2518.yaml47
-rw-r--r--Documentation/devicetree/bindings/sound/adi,ssm3515.yaml49
-rw-r--r--Documentation/devicetree/bindings/sound/audio-graph-card2.yaml20
-rw-r--r--Documentation/devicetree/bindings/sound/audio-graph.yaml6
-rw-r--r--Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml10
-rw-r--r--Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml11
-rw-r--r--Documentation/devicetree/bindings/sound/da7219.txt112
-rw-r--r--Documentation/devicetree/bindings/sound/dialog,da7219.yaml237
-rw-r--r--Documentation/devicetree/bindings/sound/fsl-asoc-card.txt2
-rw-r--r--Documentation/devicetree/bindings/sound/google,chv3-codec.yaml31
-rw-r--r--Documentation/devicetree/bindings/sound/google,chv3-i2s.yaml44
-rw-r--r--Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml5
-rw-r--r--Documentation/devicetree/bindings/sound/ingenic,aic.yaml1
-rw-r--r--Documentation/devicetree/bindings/sound/loongson,ls-audio-card.yaml70
-rw-r--r--Documentation/devicetree/bindings/sound/mediatek,mt8188-afe.yaml66
-rw-r--r--Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml27
-rw-r--r--Documentation/devicetree/bindings/sound/microchip,sama7g5-pdmc.yaml8
-rw-r--r--Documentation/devicetree/bindings/sound/nau8315.txt24
-rw-r--r--Documentation/devicetree/bindings/sound/nau8540.txt16
-rw-r--r--Documentation/devicetree/bindings/sound/nau8810.txt17
-rw-r--r--Documentation/devicetree/bindings/sound/nau8824.txt88
-rw-r--r--Documentation/devicetree/bindings/sound/nau8825.txt111
-rw-r--r--Documentation/devicetree/bindings/sound/nuvoton,nau8315.yaml44
-rw-r--r--Documentation/devicetree/bindings/sound/nuvoton,nau8540.yaml40
-rw-r--r--Documentation/devicetree/bindings/sound/nuvoton,nau8810.yaml45
-rw-r--r--Documentation/devicetree/bindings/sound/nuvoton,nau8824.yaml182
-rw-r--r--Documentation/devicetree/bindings/sound/nuvoton,nau8825.yaml239
-rw-r--r--Documentation/devicetree/bindings/sound/nvidia,tegra-audio-common.yaml4
-rw-r--r--Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml2
-rw-r--r--Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml4
-rw-r--r--Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.yaml4
-rw-r--r--Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml4
-rw-r--r--Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml66
-rw-r--r--Documentation/devicetree/bindings/sound/realtek,rt1016.yaml40
-rw-r--r--Documentation/devicetree/bindings/sound/rt1016.txt17
-rw-r--r--Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml3
-rw-r--r--Documentation/devicetree/bindings/sound/ssm2518.txt20
-rw-r--r--Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml11
-rw-r--r--Documentation/devicetree/bindings/sound/starfive,jh7110-tdm.yaml98
-rw-r--r--Documentation/devicetree/bindings/sound/tas2562.yaml4
-rw-r--r--Documentation/devicetree/bindings/sound/tas2770.yaml4
-rw-r--r--Documentation/devicetree/bindings/sound/tas27xx.yaml4
-rw-r--r--Documentation/devicetree/bindings/sound/ti,tas2781.yaml74
-rw-r--r--Documentation/devicetree/bindings/sound/ti,tlv320aic32x4.yaml101
-rw-r--r--Documentation/devicetree/bindings/sound/ti,tlv320aic3x.yaml1
-rw-r--r--Documentation/devicetree/bindings/sound/tlv320aic32x4.txt42
-rw-r--r--Documentation/devicetree/bindings/sound/wlf,wm8903.yaml4
-rw-r--r--Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml39
-rw-r--r--Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml8
-rw-r--r--Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml18
-rw-r--r--Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml4
-rw-r--r--Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml18
-rw-r--r--Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml3
-rw-r--r--Documentation/devicetree/bindings/spi/renesas,rzv2m-csi.yaml70
-rw-r--r--Documentation/devicetree/bindings/spi/samsung,spi.yaml2
-rw-r--r--Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml2
-rw-r--r--Documentation/devicetree/bindings/spi/socionext,uniphier-spi.yaml3
-rw-r--r--Documentation/devicetree/bindings/spi/spi-cadence.yaml2
-rw-r--r--Documentation/devicetree/bindings/spi/spi-controller.yaml2
-rw-r--r--Documentation/devicetree/bindings/spi/spi-xilinx.yaml2
-rw-r--r--Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml8
-rw-r--r--Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml2
-rw-r--r--Documentation/devicetree/bindings/spmi/mtk,spmi-mtk-pmif.yaml13
-rw-r--r--Documentation/devicetree/bindings/sram/qcom,imem.yaml2
-rw-r--r--Documentation/devicetree/bindings/sram/sram.yaml1
-rw-r--r--Documentation/devicetree/bindings/thermal/armada-thermal.txt1
-rw-r--r--Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt41
-rw-r--r--Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.yaml48
-rw-r--r--Documentation/devicetree/bindings/thermal/qcom-tsens.yaml32
-rw-r--r--Documentation/devicetree/bindings/timer/brcm,kona-timer.txt25
-rw-r--r--Documentation/devicetree/bindings/timer/brcm,kona-timer.yaml52
-rw-r--r--Documentation/devicetree/bindings/timer/cdns,ttc.yaml2
-rw-r--r--Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml4
-rw-r--r--Documentation/devicetree/bindings/timer/loongson,ls1x-pwmtimer.yaml48
-rw-r--r--Documentation/devicetree/bindings/timer/ralink,rt2880-timer.yaml44
-rw-r--r--Documentation/devicetree/bindings/timer/sifive,clint.yaml22
-rw-r--r--Documentation/devicetree/bindings/timestamp/hardware-timestamps-common.yaml2
-rw-r--r--Documentation/devicetree/bindings/trivial-devices.yaml2
-rw-r--r--Documentation/devicetree/bindings/ufs/qcom,ufs.yaml25
-rw-r--r--Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml2
-rw-r--r--Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml4
-rw-r--r--Documentation/devicetree/bindings/usb/dwc2.yaml1
-rw-r--r--Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml2
-rw-r--r--Documentation/devicetree/bindings/usb/fsl,imx8qm-cdns3.yaml103
-rw-r--r--Documentation/devicetree/bindings/usb/generic-ehci.yaml1
-rw-r--r--Documentation/devicetree/bindings/usb/generic-ohci.yaml17
-rw-r--r--Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml2
-rw-r--r--Documentation/devicetree/bindings/usb/microchip,usb5744.yaml107
-rw-r--r--Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml7
-rw-r--r--Documentation/devicetree/bindings/usb/onnn,nb7vpq904m.yaml141
-rw-r--r--Documentation/devicetree/bindings/usb/qcom,dwc3.yaml24
-rw-r--r--Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml190
-rw-r--r--Documentation/devicetree/bindings/usb/samsung,exynos-dwc3.yaml4
-rw-r--r--Documentation/devicetree/bindings/usb/snps,dwc3.yaml6
-rw-r--r--Documentation/devicetree/bindings/usb/starfive,jh7110-usb.yaml115
-rw-r--r--Documentation/devicetree/bindings/usb/ti,am62-usb.yaml2
-rw-r--r--Documentation/devicetree/bindings/usb/usb251xb.yaml2
-rw-r--r--Documentation/devicetree/bindings/usb/xlnx,usb2.yaml2
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.yaml12
-rw-r--r--Documentation/devicetree/bindings/watchdog/brcm,kona-wdt.txt15
-rw-r--r--Documentation/devicetree/bindings/watchdog/brcm,kona-wdt.yaml41
-rw-r--r--Documentation/devicetree/bindings/watchdog/cadence-wdt.txt23
-rw-r--r--Documentation/devicetree/bindings/watchdog/cdns,wdt-r1p2.yaml62
-rw-r--r--Documentation/devicetree/bindings/watchdog/loongson,ls1x-wdt.yaml42
-rw-r--r--Documentation/devicetree/bindings/watchdog/watchdog.yaml4
-rw-r--r--Documentation/devicetree/bindings/watchdog/xlnx,versal-wwdt.yaml50
-rw-r--r--Documentation/devicetree/bindings/watchdog/xlnx,xps-timebase-wdt.yaml4
529 files changed, 12087 insertions, 2613 deletions
diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
index 274ee0890312..08d59842655c 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.yaml
+++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
@@ -4,7 +4,7 @@
$id: http://devicetree.org/schemas/arm/amlogic.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Amlogic MesonX
+title: Amlogic SoC based Platforms
maintainers:
- Kevin Hilman <khilman@baylibre.com>
@@ -205,6 +205,13 @@ properties:
- amlogic,ad401
- const: amlogic,a1
+ - description: Boards with the Amlogic C3 C302X/C308L SoC
+ items:
+ - enum:
+ - amlogic,aw409
+ - amlogic,aw419
+ - const: amlogic,c3
+
- description: Boards with the Amlogic Meson S4 S805X2 SoC
items:
- enum:
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml
index 0c5b875cb654..d6c84b6e7fe6 100644
--- a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml
@@ -287,7 +287,7 @@ examples:
arm,trig-in-sigs = <0 1>;
arm,trig-in-types = <PE_DBGTRIGGER
PE_PMUIRQ>;
- arm,trig-out-sigs=<0 1 2 >;
+ arm,trig-out-sigs = <0 1 2 >;
arm,trig-out-types = <PE_EDBGREQ
PE_DBGRESTART
PE_CTIIRQ>;
@@ -309,24 +309,24 @@ examples:
trig-conns@0 {
reg = <0>;
- arm,trig-in-sigs=<0>;
- arm,trig-in-types=<GEN_INTREQ>;
- arm,trig-out-sigs=<0>;
- arm,trig-out-types=<GEN_HALTREQ>;
+ arm,trig-in-sigs = <0>;
+ arm,trig-in-types = <GEN_INTREQ>;
+ arm,trig-out-sigs = <0>;
+ arm,trig-out-types = <GEN_HALTREQ>;
arm,trig-conn-name = "sys_profiler";
};
trig-conns@1 {
reg = <1>;
- arm,trig-out-sigs=<2 3>;
- arm,trig-out-types=<GEN_HALTREQ GEN_RESTARTREQ>;
+ arm,trig-out-sigs = <2 3>;
+ arm,trig-out-types = <GEN_HALTREQ GEN_RESTARTREQ>;
arm,trig-conn-name = "watchdog";
};
trig-conns@2 {
reg = <2>;
- arm,trig-in-sigs=<1 6>;
- arm,trig-in-types=<GEN_HALTREQ GEN_RESTARTREQ>;
+ arm,trig-in-sigs = <1 6>;
+ arm,trig-in-types = <GEN_HALTREQ GEN_RESTARTREQ>;
arm,trig-conn-name = "g_counter";
};
};
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-dummy-sink.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-dummy-sink.yaml
new file mode 100644
index 000000000000..cb78cfa56702
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-dummy-sink.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-dummy-sink.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Coresight Dummy sink component
+
+description: |
+ CoreSight components are compliant with the ARM CoreSight architecture
+ specification and can be connected in various topologies to suit a particular
+ SoCs tracing needs. These trace components can generally be classified as
+ sinks, links and sources. Trace data produced by one or more sources flows
+ through the intermediate links connecting the source to the currently selected
+ sink.
+
+ The Coresight dummy sink component is for the specific coresight sink devices
+ kernel don't have permission to access or configure, e.g., CoreSight EUD on
+ Qualcomm platforms. It is a mini-USB hub implemented to support the USB-based
+ debug and trace capabilities. For this device, a dummy driver is needed to
+ register it as Coresight sink device in kernel side, so that path can be
+ created in the driver. Then the trace flow would be transferred to EUD via
+ coresight link of AP processor. It provides Coresight API for operations on
+ dummy source devices, such as enabling and disabling them. It also provides
+ the Coresight dummy source paths for debugging.
+
+ The primary use case of the coresight dummy sink is to build path in kernel
+ side for dummy sink component.
+
+maintainers:
+ - Mike Leach <mike.leach@linaro.org>
+ - Suzuki K Poulose <suzuki.poulose@arm.com>
+ - James Clark <james.clark@arm.com>
+ - Mao Jinlong <quic_jinlmao@quicinc.com>
+ - Hao Zhang <quic_hazha@quicinc.com>
+
+properties:
+ compatible:
+ enum:
+ - arm,coresight-dummy-sink
+
+ in-ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port:
+ description: Input connection from the Coresight Trace bus to
+ dummy sink, such as Embedded USB debugger(EUD).
+
+ $ref: /schemas/graph.yaml#/properties/port
+
+required:
+ - compatible
+ - in-ports
+
+additionalProperties: false
+
+examples:
+ # Minimum dummy sink definition. Dummy sink connect to coresight replicator.
+ - |
+ sink {
+ compatible = "arm,coresight-dummy-sink";
+
+ in-ports {
+ port {
+ eud_in_replicator_swao: endpoint {
+ remote-endpoint = <&replicator_swao_out_eud>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-dummy-source.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-dummy-source.yaml
new file mode 100644
index 000000000000..5fedaed49a1f
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-dummy-source.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-dummy-source.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Coresight Dummy source component
+
+description: |
+ CoreSight components are compliant with the ARM CoreSight architecture
+ specification and can be connected in various topologies to suit a particular
+ SoCs tracing needs. These trace components can generally be classified as
+ sinks, links and sources. Trace data produced by one or more sources flows
+ through the intermediate links connecting the source to the currently selected
+ sink.
+
+ The Coresight dummy source component is for the specific coresight source
+ devices kernel don't have permission to access or configure. For some SOCs,
+ there would be Coresight source trace components on sub-processor which
+ are conneted to AP processor via debug bus. For these devices, a dummy driver
+ is needed to register them as Coresight source devices, so that paths can be
+ created in the driver. It provides Coresight API for operations on dummy
+ source devices, such as enabling and disabling them. It also provides the
+ Coresight dummy source paths for debugging.
+
+ The primary use case of the coresight dummy source is to build path in kernel
+ side for dummy source component.
+
+maintainers:
+ - Mike Leach <mike.leach@linaro.org>
+ - Suzuki K Poulose <suzuki.poulose@arm.com>
+ - James Clark <james.clark@arm.com>
+ - Mao Jinlong <quic_jinlmao@quicinc.com>
+ - Hao Zhang <quic_hazha@quicinc.com>
+
+properties:
+ compatible:
+ enum:
+ - arm,coresight-dummy-source
+
+ out-ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port:
+ description: Output connection from the source to Coresight
+ Trace bus.
+ $ref: /schemas/graph.yaml#/properties/port
+
+required:
+ - compatible
+ - out-ports
+
+additionalProperties: false
+
+examples:
+ # Minimum dummy source definition. Dummy source connect to coresight funnel.
+ - |
+ source {
+ compatible = "arm,coresight-dummy-source";
+
+ out-ports {
+ port {
+ dummy_riscv_out_funnel_swao: endpoint {
+ remote-endpoint = <&funnel_swao_in_dummy_riscv>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml
index 09c319f803ba..cdd65881fcdd 100644
--- a/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml
@@ -122,14 +122,14 @@ properties:
arm,vexpress,position:
description: When daughterboards are stacked on one site, their position
in the stack be be described this attribute.
- $ref: '/schemas/types.yaml#/definitions/uint32'
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 3
arm,vexpress,dcc:
description: When describing tiles consisting of more than one DCC, its
number can be specified with this attribute.
- $ref: '/schemas/types.yaml#/definitions/uint32'
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 3
@@ -180,13 +180,13 @@ patternProperties:
- const: simple-bus
arm,v2m-memory-map:
description: This describes the memory map type.
- $ref: '/schemas/types.yaml#/definitions/string'
+ $ref: /schemas/types.yaml#/definitions/string
enum:
- rs1
- rs2
arm,hbi:
- $ref: '/schemas/types.yaml#/definitions/uint32'
+ $ref: /schemas/types.yaml#/definitions/uint32
description: This indicates the ARM HBI (Hardware Board ID), this is
ARM's unique board model ID, visible on the PCB's silkscreen.
@@ -197,7 +197,7 @@ patternProperties:
property, describing the physical location of the children nodes.
0 means motherboard site, while 1 and 2 are daughterboard sites, and
0xf means "sisterboard" which is the site containing the main CPU tile.
- $ref: '/schemas/types.yaml#/definitions/uint32'
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 15
diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
index ab1b352344ae..67a66bf74895 100644
--- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
@@ -52,100 +52,6 @@ Example:
reg = <0xe3804000 0x1000>;
};
-SHDWC Shutdown Controller
-
-required properties:
-- compatible: Should be "atmel,<chip>-shdwc".
- <chip> can be "at91sam9260", "at91sam9rl" or "at91sam9x5".
-- reg: Should contain registers location and length
-- clocks: phandle to input clock.
-
-optional properties:
-- atmel,wakeup-mode: String, operation mode of the wakeup mode.
- Supported values are: "none", "high", "low", "any".
-- atmel,wakeup-counter: Counter on Wake-up 0 (between 0x0 and 0xf).
-
-optional at91sam9260 properties:
-- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
-
-optional at91sam9rl properties:
-- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.
-- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
-
-optional at91sam9x5 properties:
-- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.
-
-Example:
-
- shdwc@fffffd10 {
- compatible = "atmel,at91sam9260-shdwc";
- reg = <0xfffffd10 0x10>;
- clocks = <&clk32k>;
- };
-
-SHDWC SAMA5D2-Compatible Shutdown Controller
-
-1) shdwc node
-
-required properties:
-- compatible: should be "atmel,sama5d2-shdwc", "microchip,sam9x60-shdwc" or
- "microchip,sama7g5-shdwc"
-- reg: should contain registers location and length
-- clocks: phandle to input clock.
-- #address-cells: should be one. The cell is the wake-up input index.
-- #size-cells: should be zero.
-
-optional properties:
-
-- debounce-delay-us: minimum wake-up inputs debouncer period in
- microseconds. It's usually a board-related property.
-- atmel,wakeup-rtc-timer: boolean to enable Real-Time Clock wake-up.
-
-optional microchip,sam9x60-shdwc or microchip,sama7g5-shdwc properties:
-- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
-
-The node contains child nodes for each wake-up input that the platform uses.
-
-2) input nodes
-
-Wake-up input nodes are usually described in the "board" part of the Device
-Tree. Note also that input 0 is linked to the wake-up pin and is frequently
-used.
-
-Required properties:
-- reg: should contain the wake-up input index [0 - 15].
-
-Optional properties:
-- atmel,wakeup-active-high: boolean, the corresponding wake-up input described
- by the child, forces the wake-up of the core power supply on a high level.
- The default is to be active low.
-
-Example:
-
-On the SoC side:
- shdwc@f8048010 {
- compatible = "atmel,sama5d2-shdwc";
- reg = <0xf8048010 0x10>;
- clocks = <&clk32k>;
- #address-cells = <1>;
- #size-cells = <0>;
- atmel,wakeup-rtc-timer;
- };
-
-On the board side:
- shdwc@f8048010 {
- debounce-delay-us = <976>;
-
- input@0 {
- reg = <0>;
- };
-
- input@1 {
- reg = <1>;
- atmel,wakeup-active-high;
- };
- };
-
Special Function Registers (SFR)
Special Function Registers (SFR) manage specific aspects of the integrated
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml
index 454b0e93245d..5c3ac97e8728 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml
@@ -25,13 +25,15 @@ properties:
- enum:
- asus,rt-ac56u
- asus,rt-ac68u
+ - buffalo,wzr-1166dhp
+ - buffalo,wzr-1166dhp2
- buffalo,wzr-1750dhp
- linksys,ea6300-v1
- linksys,ea6500-v2
- - luxul,xap-1510v1
+ - luxul,xap-1510-v1
- luxul,xwc-1000
- - netgear,r6250v1
- - netgear,r6300v2
+ - netgear,r6250-v1
+ - netgear,r6300-v2
- smartrg,sr400ac
- brcm,bcm94708
- const: brcm,bcm4708
@@ -42,8 +44,8 @@ properties:
- asus,rt-n18u
- buffalo,wzr-600dhp2
- buffalo,wzr-900dhp
- - luxul,xap-1410v1
- - luxul,xwr-1200v1
+ - luxul,xap-1410-v1
+ - luxul,xwr-1200-v1
- tplink,archer-c5-v2
- const: brcm,bcm47081
- const: brcm,bcm4708
@@ -72,7 +74,7 @@ properties:
- luxul,xap-1610-v1
- luxul,xbr-4500-v1
- luxul,xwc-2000-v1
- - luxul,xwr-3100v1
+ - luxul,xwr-3100-v1
- luxul,xwr-3150-v1
- netgear,r8500
- phicomm,k3
diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml
index ff272e517d57..9e6a45eea4e5 100644
--- a/Documentation/devicetree/bindings/arm/cpus.yaml
+++ b/Documentation/devicetree/bindings/arm/cpus.yaml
@@ -153,6 +153,7 @@ properties:
- arm,cortex-r4
- arm,cortex-r5
- arm,cortex-r7
+ - arm,cortex-r52
- arm,cortex-x1
- arm,cortex-x1c
- arm,cortex-x2
@@ -196,7 +197,7 @@ properties:
- qcom,scorpion
enable-method:
- $ref: '/schemas/types.yaml#/definitions/string'
+ $ref: /schemas/types.yaml#/definitions/string
oneOf:
# On ARM v8 64-bit this property is required
- enum:
@@ -245,8 +246,8 @@ properties:
cpu-release-addr:
oneOf:
- - $ref: '/schemas/types.yaml#/definitions/uint32'
- - $ref: '/schemas/types.yaml#/definitions/uint64'
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - $ref: /schemas/types.yaml#/definitions/uint64
description:
The DT specification defines this as 64-bit always, but some 32-bit Arm
systems have used a 32-bit value which must be supported.
@@ -254,7 +255,7 @@ properties:
property value of "spin-table".
cpu-idle-states:
- $ref: '/schemas/types.yaml#/definitions/phandle-array'
+ $ref: /schemas/types.yaml#/definitions/phandle-array
items:
maxItems: 1
description: |
@@ -270,7 +271,7 @@ properties:
cci-control-port: true
dynamic-power-coefficient:
- $ref: '/schemas/types.yaml#/definitions/uint32'
+ $ref: /schemas/types.yaml#/definitions/uint32
description:
A u32 value that represents the running time dynamic
power coefficient in units of uW/MHz/V^2. The
@@ -307,7 +308,7 @@ properties:
PM domain provider, must be "psci".
qcom,saw:
- $ref: '/schemas/types.yaml#/definitions/phandle'
+ $ref: /schemas/types.yaml#/definitions/phandle
description: |
Specifies the SAW* node associated with this CPU.
@@ -317,7 +318,7 @@ properties:
* arm/msm/qcom,saw2.txt
qcom,acc:
- $ref: '/schemas/types.yaml#/definitions/phandle'
+ $ref: /schemas/types.yaml#/definitions/phandle
description: |
Specifies the ACC* node associated with this CPU.
@@ -328,7 +329,7 @@ properties:
* arm/msm/qcom,kpss-acc.txt
rockchip,pmu:
- $ref: '/schemas/types.yaml#/definitions/phandle'
+ $ref: /schemas/types.yaml#/definitions/phandle
description: |
Specifies the syscon node controlling the cpu core power domains.
@@ -338,7 +339,7 @@ properties:
the cpu-core power-domains.
secondary-boot-reg:
- $ref: '/schemas/types.yaml#/definitions/uint32'
+ $ref: /schemas/types.yaml#/definitions/uint32
description: |
Required for systems that have an "enable-method" property value of
"brcm,bcm11351-cpu-method", "brcm,bcm23550" or "brcm,bcm-nsp-smp".
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 15d411084065..2510eaa8906d 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -726,6 +726,12 @@ properties:
- const: dh,imx6ull-dhcor-som
- const: fsl,imx6ull
+ - description: i.MX6ULL DHCOR SoM based Boards
+ items:
+ - const: marantec,imx6ull-dhcor-maveo-box
+ - const: dh,imx6ull-dhcor-som
+ - const: fsl,imx6ull
+
- description: i.MX6ULL PHYTEC phyBOARD-Segin
items:
- enum:
@@ -901,6 +907,7 @@ properties:
- emtrion,emcon-mx8mm-avari # emCON-MX8MM SoM on Avari Base
- fsl,imx8mm-ddr4-evk # i.MX8MM DDR4 EVK Board
- fsl,imx8mm-evk # i.MX8MM EVK Board
+ - fsl,imx8mm-evkb # i.MX8MM EVKB Board
- gateworks,imx8mm-gw7904
- gw,imx8mm-gw71xx-0x # i.MX8MM Gateworks Development Kit
- gw,imx8mm-gw72xx-0x # i.MX8MM Gateworks Development Kit
@@ -918,6 +925,12 @@ properties:
- prt,prt8mm # i.MX8MM Protonic PRT8MM Board
- const: fsl,imx8mm
+ - description: Emtop i.MX8MM based Boards
+ items:
+ - const: ees,imx8mm-emtop-baseboard # i.MX8MM Emtop SoM on i.MX8M Mini Baseboard V1
+ - const: ees,imx8mm-emtop-som # i.MX8MM Emtop SOM-IMX8MMLPD4 module
+ - const: fsl,imx8mm
+
- description: Engicam i.Core MX8M Mini SoM based boards
items:
- enum:
@@ -1019,6 +1032,7 @@ properties:
- dmo,imx8mp-data-modul-edm-sbc # i.MX8MP eDM SBC
- fsl,imx8mp-evk # i.MX8MP EVK Board
- gateworks,imx8mp-gw74xx # i.MX8MP Gateworks Board
+ - gateworks,imx8mp-gw7905-2x # i.MX8MP Gateworks Board
- polyhex,imx8mp-debix # Polyhex Debix boards
- polyhex,imx8mp-debix-model-a # Polyhex Debix Model A Board
- toradex,verdin-imx8mp # Verdin iMX8M Plus Modules
diff --git a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml
index 91b96065f7df..86b59de7707e 100644
--- a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml
+++ b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml
@@ -96,8 +96,8 @@ examples:
compatible = "ti,k2g-sci";
ti,system-reboot-controller;
mbox-names = "rx", "tx";
- mboxes= <&msgmgr 5 2>,
- <&msgmgr 0 0>;
+ mboxes = <&msgmgr 5 2>,
+ <&msgmgr 0 0>;
reg-names = "debug_messages";
reg = <0x02921800 0x800>;
};
@@ -107,8 +107,8 @@ examples:
compatible = "ti,k2g-sci";
ti,host-id = <12>;
mbox-names = "rx", "tx";
- mboxes= <&secure_proxy_main 11>,
- <&secure_proxy_main 13>;
+ mboxes = <&secure_proxy_main 11>,
+ <&secure_proxy_main 13>;
reg-names = "debug_messages";
reg = <0x44083000 0x1000>;
diff --git a/Documentation/devicetree/bindings/arm/nuvoton/nuvoton,ma35d1.yaml b/Documentation/devicetree/bindings/arm/nuvoton/nuvoton,ma35d1.yaml
new file mode 100644
index 000000000000..fb190db61525
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/nuvoton/nuvoton,ma35d1.yaml
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/nuvoton/nuvoton,ma35d1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton MA35 series SoC based platforms
+
+maintainers:
+ - Jacky Huang <ychuang3@nuvoton.com>
+
+description: |
+ Boards with an ARMv8 based Nuvoton MA35 series SoC shall have
+ the following properties.
+
+properties:
+ $nodename:
+ const: '/'
+ compatible:
+ oneOf:
+
+ - description: MA35D1 based boards
+ items:
+ - enum:
+ - nuvoton,ma35d1-iot
+ - nuvoton,ma35d1-som
+ - const: nuvoton,ma35d1
+
+additionalProperties: true
+...
diff --git a/Documentation/devicetree/bindings/arm/npcm/npcm.yaml b/Documentation/devicetree/bindings/arm/nuvoton/nuvoton,npcm.yaml
index 6871483947c5..d386744c8815 100644
--- a/Documentation/devicetree/bindings/arm/npcm/npcm.yaml
+++ b/Documentation/devicetree/bindings/arm/nuvoton/nuvoton,npcm.yaml
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
-$id: http://devicetree.org/schemas/arm/npcm/npcm.yaml#
+$id: http://devicetree.org/schemas/arm/nuvoton/nuvoton,npcm.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: NPCM Platforms
diff --git a/Documentation/devicetree/bindings/arm/psci.yaml b/Documentation/devicetree/bindings/arm/psci.yaml
index 3a2c908ff282..0c5381e081bd 100644
--- a/Documentation/devicetree/bindings/arm/psci.yaml
+++ b/Documentation/devicetree/bindings/arm/psci.yaml
@@ -100,7 +100,7 @@ properties:
patternProperties:
"^power-domain-":
- $ref: "../power/power-domain.yaml#"
+ $ref: /schemas/power/power-domain.yaml#
type: object
description: |
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index d9dd25695c3d..450f616774e0 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -40,6 +40,7 @@ description: |
msm8939
msm8953
msm8956
+ msm8960
msm8974
msm8976
msm8992
@@ -69,6 +70,7 @@ description: |
sdm845
sdx55
sdx65
+ sdx75
sm4250
sm6115
sm6115p
@@ -85,9 +87,15 @@ description: |
The 'board' element must be one of the following strings:
adp
+ ap-al02-c2
+ ap-al02-c6
ap-al02-c7
+ ap-al02-c8
+ ap-al02-c9
ap-mi01.2
+ ap-mi01.3
ap-mi01.6
+ ap-mi01.9
cdp
cp01-c1
dragonboard
@@ -191,6 +199,7 @@ properties:
- items:
- enum:
- qcom,msm8960-cdp
+ - samsung,expressatt
- const: qcom,msm8960
- items:
@@ -333,7 +342,9 @@ properties:
- items:
- enum:
- qcom,ipq5332-ap-mi01.2
+ - qcom,ipq5332-ap-mi01.3
- qcom,ipq5332-ap-mi01.6
+ - qcom,ipq5332-ap-mi01.9
- const: qcom,ipq5332
- items:
@@ -351,7 +362,11 @@ properties:
- items:
- enum:
+ - qcom,ipq9574-ap-al02-c2
+ - qcom,ipq9574-ap-al02-c6
- qcom,ipq9574-ap-al02-c7
+ - qcom,ipq9574-ap-al02-c8
+ - qcom,ipq9574-ap-al02-c9
- const: qcom,ipq9574
- description: Sierra Wireless MangOH Green with WP8548 Module
@@ -380,9 +395,9 @@ properties:
- qcom,qru1000-idp
- const: qcom,qru1000
- - description: Qualcomm Technologies, Inc. SC7180 IDP
- items:
+ - items:
- enum:
+ - acer,aspire1
- qcom,sc7180-idp
- const: qcom,sc7180
@@ -821,6 +836,11 @@ properties:
- items:
- enum:
+ - qcom,sdx75-idp
+ - const: qcom,sdx75
+
+ - items:
+ - enum:
- qcom,ipq6018-cp01
- qcom,ipq6018-cp01-c1
- const: qcom,ipq6018
@@ -884,6 +904,11 @@ properties:
- items:
- enum:
+ - fxtec,pro1x
+ - const: qcom,sm6115
+
+ - items:
+ - enum:
- lenovo,j606f
- const: qcom,sm6115p
- const: qcom,sm6115
@@ -1042,6 +1067,7 @@ allOf:
- qcom,sdm845
- qcom,sdx55
- qcom,sdx65
+ - qcom,sdx75
- qcom,sm4250
- qcom,sm6115
- qcom,sm6125
diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
index ec141c937b8b..ecdb72a519cb 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -40,6 +40,11 @@ properties:
- const: anbernic,rg353p
- const: rockchip,rk3566
+ - description: Anbernic RG353PS
+ items:
+ - const: anbernic,rg353ps
+ - const: rockchip,rk3566
+
- description: Anbernic RG353V
items:
- const: anbernic,rg353v
@@ -102,6 +107,12 @@ properties:
- const: edgeble,neural-compute-module-6a # Edgeble Neural Compute Module 6A SoM
- const: rockchip,rk3588
+ - description: Edgeble Neural Compute Module 6(Neu6) Model B SoM based boards
+ items:
+ - const: edgeble,neural-compute-module-6b-io # Edgeble Neural Compute Module 6B IO Board
+ - const: edgeble,neural-compute-module-6b # Edgeble Neural Compute Module 6B SoM
+ - const: rockchip,rk3588
+
- description: Elgin RV1108 R1
items:
- const: elgin,rv1108-r1
@@ -189,6 +200,7 @@ properties:
items:
- enum:
- friendlyarm,nanopi-r2c
+ - friendlyarm,nanopi-r2c-plus
- friendlyarm,nanopi-r2s
- const: rockchip,rk3328
@@ -534,6 +546,11 @@ properties:
- const: hugsun,x99
- const: rockchip,rk3399
+ - description: Indiedroid Nova SBC
+ items:
+ - const: indiedroid,nova
+ - const: rockchip,rk3588s
+
- description: Khadas Edge series boards
items:
- enum:
@@ -562,6 +579,13 @@ properties:
- const: leez,p710
- const: rockchip,rk3399
+ - description: Lunzn FastRhino R66S / R68S
+ items:
+ - enum:
+ - lunzn,fastrhino-r66s
+ - lunzn,fastrhino-r68s
+ - const: rockchip,rk3568
+
- description: mqmaker MiQi
items:
- const: mqmaker,miqi
diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
index deb2cf971871..e3ffd8159ab6 100644
--- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
+++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
@@ -72,6 +72,16 @@ properties:
- const: samsung,exynos4210
- const: samsung,exynos4
+ - description: Samsung Galaxy Tab3 family boards
+ items:
+ - enum:
+ - samsung,t310 # Samsung Galaxy Tab 3 8.0 WiFi (SM-T310)
+ - samsung,t311 # Samsung Galaxy Tab 3 8.0 3G (SM-T311)
+ - samsung,t315 # Samsung Galaxy Tab 3 8.0 LTE (SM-T315)
+ - const: samsung,tab3
+ - const: samsung,exynos4212
+ - const: samsung,exynos4
+
- description: Exynos4412 based boards
items:
- enum:
diff --git a/Documentation/devicetree/bindings/arm/socionext/synquacer.yaml b/Documentation/devicetree/bindings/arm/socionext/synquacer.yaml
new file mode 100644
index 000000000000..72554a4f1c92
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/socionext/synquacer.yaml
@@ -0,0 +1,28 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/socionext/synquacer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext Synquacer platform
+
+maintainers:
+ - Masahisa Kojima <masahisa.kojima@linaro.org>
+ - Jassi Brar <jaswinder.singh@linaro.org>
+
+description:
+ Socionext SC2A11B (Synquacer) SoC based boards
+
+properties:
+ $nodename:
+ const: '/'
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - socionext,developer-box
+ - const: socionext,synquacer
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
index ad8e51aa01b0..b63ff591ef8f 100644
--- a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
+++ b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
@@ -15,12 +15,13 @@ properties:
oneOf:
- items:
- enum:
- - st,stm32mp157-syscfg
- - st,stm32mp151-pwr-mcu
- - st,stm32-syscfg
- st,stm32-power-config
+ - st,stm32-syscfg
- st,stm32-tamp
- st,stm32f4-gcan
+ - st,stm32mp151-pwr-mcu
+ - st,stm32mp157-syscfg
+ - st,stm32mp25-syscfg
- const: syscon
- items:
- const: st,stm32-tamp
diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
index 13e34241145b..4466b455bffa 100644
--- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
+++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
@@ -155,6 +155,18 @@ properties:
- const: seeed,stm32mp157c-odyssey-som
- const: st,stm32mp157
+ - description: Phytec STM32MP1 SoM based Boards
+ items:
+ - const: phytec,phycore-stm32mp1-3
+ - const: phytec,phycore-stm32mp157c-som
+ - const: st,stm32mp157
+
+ - description: ST STM32MP257 based Boards
+ items:
+ - enum:
+ - st,stm32mp257f-ev1
+ - const: st,stm32mp257
+
additionalProperties: true
...
diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml
index 013821f4a7b8..ee8fdd2da869 100644
--- a/Documentation/devicetree/bindings/arm/sunxi.yaml
+++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
@@ -305,6 +305,12 @@ properties:
- const: allwinner,i12-tvbox
- const: allwinner,sun7i-a20
+ - description: ICnova A20 ADB4006
+ items:
+ - const: incircuit,icnova-a20-adb4006
+ - const: incircuit,icnova-a20
+ - const: allwinner,sun7i-a20
+
- description: ICNova A20 SWAC
items:
- const: incircuit,icnova-a20-swac
diff --git a/Documentation/devicetree/bindings/arm/tegra.yaml b/Documentation/devicetree/bindings/arm/tegra.yaml
index 0df41f5b7e2a..fcf956406168 100644
--- a/Documentation/devicetree/bindings/arm/tegra.yaml
+++ b/Documentation/devicetree/bindings/arm/tegra.yaml
@@ -167,6 +167,11 @@ properties:
- const: nvidia,p3737-0000+p3701-0000
- const: nvidia,p3701-0000
- const: nvidia,tegra234
+ - description: NVIDIA IGX Orin Development Kit
+ items:
+ - const: nvidia,p3740-0002+p3701-0008
+ - const: nvidia,p3701-0008
+ - const: nvidia,tegra234
- description: Jetson Orin NX
items:
- const: nvidia,p3767-0000
@@ -176,5 +181,14 @@ properties:
- const: nvidia,p3768-0000+p3767-0000
- const: nvidia,p3767-0000
- const: nvidia,tegra234
+ - description: Jetson Orin Nano
+ items:
+ - const: nvidia,p3767-0005
+ - const: nvidia,tegra234
+ - description: Jetson Orin Nano Developer Kit
+ items:
+ - const: nvidia,p3768-0000+p3767-0005
+ - const: nvidia,p3767-0005
+ - const: nvidia,tegra234
additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/ti/k3.yaml b/Documentation/devicetree/bindings/arm/ti/k3.yaml
index e1183f90bb06..577eee95c893 100644
--- a/Documentation/devicetree/bindings/arm/ti/k3.yaml
+++ b/Documentation/devicetree/bindings/arm/ti/k3.yaml
@@ -25,6 +25,12 @@ properties:
- ti,am62a7-sk
- const: ti,am62a7
+ - description: K3 AM625 SoC PHYTEC phyBOARD-Lyra
+ items:
+ - const: phytec,am625-phyboard-lyra-rdk
+ - const: phytec,am62-phycore-som
+ - const: ti,am625
+
- description: K3 AM625 SoC
items:
- enum:
@@ -33,6 +39,26 @@ properties:
- ti,am62-lp-sk
- const: ti,am625
+ - description: K3 AM62x SoC Toradex Verdin Modules and Carrier Boards
+ items:
+ - enum:
+ - toradex,verdin-am62-nonwifi-dahlia # Verdin AM62 Module on Dahlia
+ - toradex,verdin-am62-nonwifi-dev # Verdin AM62 Module on Verdin Development Board
+ - toradex,verdin-am62-nonwifi-yavia # Verdin AM62 Module on Yavia
+ - const: toradex,verdin-am62-nonwifi # Verdin AM62 Module without Wi-Fi / BT
+ - const: toradex,verdin-am62 # Verdin AM62 Module
+ - const: ti,am625
+
+ - description: K3 AM62x SoC Toradex Verdin Modules and Carrier Boards with Wi-Fi / BT
+ items:
+ - enum:
+ - toradex,verdin-am62-wifi-dahlia # Verdin AM62 Wi-Fi / BT Module on Dahlia
+ - toradex,verdin-am62-wifi-dev # Verdin AM62 Wi-Fi / BT M. on Verdin Development B.
+ - toradex,verdin-am62-wifi-yavia # Verdin AM62 Wi-Fi / BT Module on Yavia
+ - const: toradex,verdin-am62-wifi # Verdin AM62 Wi-Fi / BT Module
+ - const: toradex,verdin-am62 # Verdin AM62 Module
+ - const: ti,am625
+
- description: K3 AM642 SoC
items:
- enum:
diff --git a/Documentation/devicetree/bindings/arm/xen.txt b/Documentation/devicetree/bindings/arm/xen.txt
index 61d77acbeb5e..f925290d4641 100644
--- a/Documentation/devicetree/bindings/arm/xen.txt
+++ b/Documentation/devicetree/bindings/arm/xen.txt
@@ -56,7 +56,7 @@ hypervisor {
};
The format and meaning of the "xen,uefi-*" parameters are similar to those in
-Documentation/arm/uefi.rst, which are provided by the regular UEFI stub. However
+Documentation/arch/arm/uefi.rst, which are provided by the regular UEFI stub. However
they differ because they are provided by the Xen hypervisor, together with a set
of UEFI runtime services implemented via hypercalls, see
http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,platform.h.html.
diff --git a/Documentation/devicetree/bindings/arm/xilinx.yaml b/Documentation/devicetree/bindings/arm/xilinx.yaml
index 969cfe6dc434..f57ed0347894 100644
--- a/Documentation/devicetree/bindings/arm/xilinx.yaml
+++ b/Documentation/devicetree/bindings/arm/xilinx.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Xilinx Zynq Platforms
maintainers:
- - Michal Simek <michal.simek@xilinx.com>
+ - Michal Simek <michal.simek@amd.com>
description: |
Xilinx boards with Zynq-7000 SOC or Zynq UltraScale+ MPSoC
@@ -61,10 +61,10 @@ properties:
- const: xlnx,zynqmp-zc1254
- const: xlnx,zynqmp
- - description: Xilinx internal board zc1275
+ - description: Xilinx evaluation board zcu1275
items:
- - const: xlnx,zynqmp-zc1275-revA
- - const: xlnx,zynqmp-zc1275
+ - const: xlnx,zynqmp-zcu1275-revA
+ - const: xlnx,zynqmp-zcu1275
- const: xlnx,zynqmp
- description: Xilinx 96boards compatible board zcu100
diff --git a/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml b/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml
index 71364c6081ff..b29ce598f9aa 100644
--- a/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml
+++ b/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Ceva AHCI SATA Controller
maintainers:
- - Piyush Mehta <piyush.mehta@xilinx.com>
+ - Piyush Mehta <piyush.mehta@amd.com>
description: |
The Ceva SATA controller mostly conforms to the AHCI interface with some
diff --git a/Documentation/devicetree/bindings/ata/rockchip,dwc-ahci.yaml b/Documentation/devicetree/bindings/ata/rockchip,dwc-ahci.yaml
new file mode 100644
index 000000000000..b5e5767d8698
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/rockchip,dwc-ahci.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/rockchip,dwc-ahci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DWC AHCI SATA controller for Rockchip devices
+
+maintainers:
+ - Serge Semin <fancer.lancer@gmail.com>
+
+description:
+ This document defines device tree bindings for the Synopsys DWC
+ implementation of the AHCI SATA controller found in Rockchip
+ devices.
+
+select:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - rockchip,rk3568-dwc-ahci
+ - rockchip,rk3588-dwc-ahci
+ required:
+ - compatible
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - rockchip,rk3568-dwc-ahci
+ - rockchip,rk3588-dwc-ahci
+ - const: snps,dwc-ahci
+
+ ports-implemented:
+ const: 1
+
+ sata-port@0:
+ $ref: /schemas/ata/snps,dwc-ahci-common.yaml#/$defs/dwc-ahci-port
+
+ properties:
+ reg:
+ const: 0
+
+ unevaluatedProperties: false
+
+patternProperties:
+ "^sata-port@[1-9a-e]$": false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - ports-implemented
+
+allOf:
+ - $ref: snps,dwc-ahci-common.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - rockchip,rk3588-dwc-ahci
+ then:
+ properties:
+ clocks:
+ maxItems: 5
+ clock-names:
+ items:
+ - const: sata
+ - const: pmalive
+ - const: rxoob
+ - const: ref
+ - const: asic
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - rockchip,rk3568-dwc-ahci
+ then:
+ properties:
+ clocks:
+ maxItems: 3
+ clock-names:
+ items:
+ - const: sata
+ - const: pmalive
+ - const: rxoob
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/rockchip,rk3588-cru.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/ata/ahci.h>
+ #include <dt-bindings/phy/phy.h>
+
+ sata@fe210000 {
+ compatible = "rockchip,rk3588-dwc-ahci", "snps,dwc-ahci";
+ reg = <0xfe210000 0x1000>;
+ clocks = <&cru ACLK_SATA0>, <&cru CLK_PMALIVE0>,
+ <&cru CLK_RXOOB0>, <&cru CLK_PIPEPHY0_REF>,
+ <&cru CLK_PIPEPHY0_PIPE_ASIC_G>;
+ clock-names = "sata", "pmalive", "rxoob", "ref", "asic";
+ interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH 0>;
+ ports-implemented = <0x1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sata-port@0 {
+ reg = <0>;
+ hba-port-cap = <HBA_PORT_FBSCP>;
+ phys = <&combphy0_ps PHY_TYPE_SATA>;
+ phy-names = "sata-phy";
+ snps,rx-ts-max = <32>;
+ snps,tx-ts-max = <32>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/ata/snps,dwc-ahci-common.yaml b/Documentation/devicetree/bindings/ata/snps,dwc-ahci-common.yaml
index c1457910520b..34c5bf65b02d 100644
--- a/Documentation/devicetree/bindings/ata/snps,dwc-ahci-common.yaml
+++ b/Documentation/devicetree/bindings/ata/snps,dwc-ahci-common.yaml
@@ -31,11 +31,11 @@ properties:
PM-alive clock, RxOOB detection clock, embedded PHYs reference (Rx/Tx)
clock, etc.
minItems: 1
- maxItems: 4
+ maxItems: 6
clock-names:
minItems: 1
- maxItems: 4
+ maxItems: 6
items:
oneOf:
- description: Application APB/AHB/AXI BIU clock
@@ -48,6 +48,10 @@ properties:
const: pmalive
- description: RxOOB detection clock
const: rxoob
+ - description: PHY Transmit Clock
+ const: asic
+ - description: PHY Receive Clock
+ const: rbc
- description: SATA Ports reference clock
const: ref
diff --git a/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml b/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml
index 5afa4b57ce20..4c848fcb5a5d 100644
--- a/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml
+++ b/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml
@@ -13,6 +13,15 @@ description:
This document defines device tree bindings for the generic Synopsys DWC
implementation of the AHCI SATA controller.
+select:
+ properties:
+ compatible:
+ enum:
+ - snps,dwc-ahci
+ - snps,spear-ahci
+ required:
+ - compatible
+
allOf:
- $ref: snps,dwc-ahci-common.yaml#
@@ -23,10 +32,6 @@ properties:
const: snps,dwc-ahci
- description: SPEAr1340 AHCI SATA device
const: snps,spear-ahci
- - description: Rockhip RK3568 AHCI controller
- items:
- - const: rockchip,rk3568-dwc-ahci
- - const: snps,dwc-ahci
patternProperties:
"^sata-port@[0-9a-e]$":
diff --git a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
index 49304a1476ab..be95f6b97b41 100644
--- a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
+++ b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
@@ -40,6 +40,7 @@ properties:
linux,keymap: true
linux,no-autorepeat:
+ type: boolean
description: Disable keyrepeat
default-brightness-level:
diff --git a/Documentation/devicetree/bindings/bus/ti-sysc.yaml b/Documentation/devicetree/bindings/bus/ti-sysc.yaml
index f089634f9466..6d7bca6c138e 100644
--- a/Documentation/devicetree/bindings/bus/ti-sysc.yaml
+++ b/Documentation/devicetree/bindings/bus/ti-sysc.yaml
@@ -97,7 +97,7 @@ properties:
- enum: [ ick, fck, sys_clk ]
- items:
- const: fck
- - enum: [ ick. dbclk, osc, sys_clk, dss_clk, ahclkx ]
+ - enum: [ ick, dbclk, osc, sys_clk, dss_clk, ahclkx ]
- items:
- const: fck
- const: phy-clk
diff --git a/Documentation/devicetree/bindings/clock/amlogic,a1-peripherals-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,a1-peripherals-clkc.yaml
new file mode 100644
index 000000000000..6d84cee1bd75
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/amlogic,a1-peripherals-clkc.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/amlogic,a1-peripherals-clkc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic A1 Peripherals Clock Control Unit
+
+maintainers:
+ - Neil Armstrong <neil.armstrong@linaro.org>
+ - Jerome Brunet <jbrunet@baylibre.com>
+ - Jian Hu <jian.hu@jian.hu.com>
+ - Dmitry Rokosov <ddrokosov@sberdevices.ru>
+
+properties:
+ compatible:
+ const: amlogic,a1-peripherals-clkc
+
+ '#clock-cells':
+ const: 1
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: input fixed pll div2
+ - description: input fixed pll div3
+ - description: input fixed pll div5
+ - description: input fixed pll div7
+ - description: input hifi pll
+ - description: input oscillator (usually at 24MHz)
+
+ clock-names:
+ items:
+ - const: fclk_div2
+ - const: fclk_div3
+ - const: fclk_div5
+ - const: fclk_div7
+ - const: hifi_pll
+ - const: xtal
+
+required:
+ - compatible
+ - '#clock-cells'
+ - reg
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/amlogic,a1-pll-clkc.h>
+ apb {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ clock-controller@800 {
+ compatible = "amlogic,a1-peripherals-clkc";
+ reg = <0 0x800 0 0x104>;
+ #clock-cells = <1>;
+ clocks = <&clkc_pll CLKID_FCLK_DIV2>,
+ <&clkc_pll CLKID_FCLK_DIV3>,
+ <&clkc_pll CLKID_FCLK_DIV5>,
+ <&clkc_pll CLKID_FCLK_DIV7>,
+ <&clkc_pll CLKID_HIFI_PLL>,
+ <&xtal>;
+ clock-names = "fclk_div2", "fclk_div3",
+ "fclk_div5", "fclk_div7",
+ "hifi_pll", "xtal";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml
new file mode 100644
index 000000000000..a59b188a8bf5
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/amlogic,a1-pll-clkc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic A1 PLL Clock Control Unit
+
+maintainers:
+ - Neil Armstrong <neil.armstrong@linaro.org>
+ - Jerome Brunet <jbrunet@baylibre.com>
+ - Jian Hu <jian.hu@jian.hu.com>
+ - Dmitry Rokosov <ddrokosov@sberdevices.ru>
+
+properties:
+ compatible:
+ const: amlogic,a1-pll-clkc
+
+ '#clock-cells':
+ const: 1
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: input fixpll_in
+ - description: input hifipll_in
+
+ clock-names:
+ items:
+ - const: fixpll_in
+ - const: hifipll_in
+
+required:
+ - compatible
+ - '#clock-cells'
+ - reg
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/amlogic,a1-peripherals-clkc.h>
+ apb {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ clock-controller@7c80 {
+ compatible = "amlogic,a1-pll-clkc";
+ reg = <0 0x7c80 0 0x18c>;
+ #clock-cells = <1>;
+ clocks = <&clkc_periphs CLKID_FIXPLL_IN>,
+ <&clkc_periphs CLKID_HIFIPLL_IN>;
+ clock-names = "fixpll_in", "hifipll_in";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt
deleted file mode 100644
index 13f45db3b66d..000000000000
--- a/Documentation/devicetree/bindings/clock/at91-clock.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-Device Tree Clock bindings for arch-at91
-
-This binding uses the common clock binding[1].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Slow Clock controller:
-
-Required properties:
-- compatible : shall be one of the following:
- "atmel,at91sam9x5-sckc",
- "atmel,sama5d3-sckc",
- "atmel,sama5d4-sckc" or
- "microchip,sam9x60-sckc":
- at91 SCKC (Slow Clock Controller)
-- #clock-cells : shall be 1 for "microchip,sam9x60-sckc" otherwise shall be 0.
-- clocks : shall be the input parent clock phandle for the clock.
-
-Optional properties:
-- atmel,osc-bypass : boolean property. Set this when a clock signal is directly
- provided on XIN.
-
-For example:
- sckc@fffffe50 {
- compatible = "atmel,at91sam9x5-sckc";
- reg = <0xfffffe50 0x4>;
- clocks = <&slow_xtal>;
- #clock-cells = <0>;
- };
-
-Power Management Controller (PMC):
-
-Required properties:
-- compatible : shall be "atmel,<chip>-pmc", "syscon" or
- "microchip,sam9x60-pmc"
- <chip> can be: at91rm9200, at91sam9260, at91sam9261,
- at91sam9263, at91sam9g45, at91sam9n12, at91sam9rl, at91sam9g15,
- at91sam9g25, at91sam9g35, at91sam9x25, at91sam9x35, at91sam9x5,
- sama5d2, sama5d3 or sama5d4.
-- #clock-cells : from common clock binding; shall be set to 2. The first entry
- is the type of the clock (core, system, peripheral or generated) and the
- second entry its index as provided by the datasheet
-- clocks : Must contain an entry for each entry in clock-names.
-- clock-names: Must include the following entries: "slow_clk", "main_xtal"
-
-Optional properties:
-- atmel,osc-bypass : boolean property. Set this when a clock signal is directly
- provided on XIN.
-
-For example:
- pmc: pmc@f0018000 {
- compatible = "atmel,sama5d4-pmc", "syscon";
- reg = <0xf0018000 0x120>;
- interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
- #clock-cells = <2>;
- clocks = <&clk32k>, <&main_xtal>;
- clock-names = "slow_clk", "main_xtal";
- };
diff --git a/Documentation/devicetree/bindings/clock/atmel,at91rm9200-pmc.yaml b/Documentation/devicetree/bindings/clock/atmel,at91rm9200-pmc.yaml
new file mode 100644
index 000000000000..c1bdcd9058ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/atmel,at91rm9200-pmc.yaml
@@ -0,0 +1,154 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/atmel,at91rm9200-pmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel Power Management Controller (PMC)
+
+maintainers:
+ - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+description:
+ The power management controller optimizes power consumption by controlling all
+ system and user peripheral clocks. The PMC enables/disables the clock inputs
+ to many of the peripherals and to the processor.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: atmel,at91sam9g20-pmc
+ - const: atmel,at91sam9260-pmc
+ - const: syscon
+ - items:
+ - enum:
+ - atmel,at91sam9g15-pmc
+ - atmel,at91sam9g25-pmc
+ - atmel,at91sam9g35-pmc
+ - atmel,at91sam9x25-pmc
+ - atmel,at91sam9x35-pmc
+ - const: atmel,at91sam9x5-pmc
+ - const: syscon
+ - items:
+ - enum:
+ - atmel,at91rm9200-pmc
+ - atmel,at91sam9260-pmc
+ - atmel,at91sam9g45-pmc
+ - atmel,at91sam9n12-pmc
+ - atmel,at91sam9rl-pmc
+ - atmel,at91sam9x5-pmc
+ - atmel,sama5d2-pmc
+ - atmel,sama5d3-pmc
+ - atmel,sama5d4-pmc
+ - microchip,sam9x60-pmc
+ - microchip,sama7g5-pmc
+ - const: syscon
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ "#clock-cells":
+ description: |
+ - 1st cell is the clock type, one of PMC_TYPE_CORE, PMC_TYPE_SYSTEM,
+ PMC_TYPE_PERIPHERAL, PMC_TYPE_GCK, PMC_TYPE_PROGRAMMABLE (as defined
+ in <dt-bindings/clock/at91.h>)
+ - 2nd cell is the clock identifier as defined in <dt-bindings/clock/at91.h
+ (for core clocks) or as defined in datasheet (for system, peripheral,
+ gck and programmable clocks).
+ const: 2
+
+ clocks:
+ minItems: 2
+ maxItems: 3
+
+ clock-names:
+ minItems: 2
+ maxItems: 3
+
+ atmel,osc-bypass:
+ description: set when a clock signal is directly provided on XIN
+ type: boolean
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - "#clock-cells"
+ - clocks
+ - clock-names
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - microchip,sam9x60-pmc
+ - microchip,sama7g5-pmc
+ then:
+ properties:
+ clocks:
+ minItems: 3
+ maxItems: 3
+ clock-names:
+ items:
+ - const: td_slck
+ - const: md_slck
+ - const: main_xtal
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - atmel,at91rm9200-pmc
+ - atmel,at91sam9260-pmc
+ - atmel,at91sam9g20-pmc
+ then:
+ properties:
+ clocks:
+ minItems: 2
+ maxItems: 2
+ clock-names:
+ items:
+ - const: slow_xtal
+ - const: main_xtal
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - atmel,sama5d2-pmc
+ - atmel,sama5d3-pmc
+ - atmel,sama5d4-pmc
+ then:
+ properties:
+ clocks:
+ minItems: 2
+ maxItems: 2
+ clock-names:
+ items:
+ - const: slow_clk
+ - const: main_xtal
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ pmc: clock-controller@f0018000 {
+ compatible = "atmel,sama5d4-pmc", "syscon";
+ reg = <0xf0018000 0x120>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ #clock-cells = <2>;
+ clocks = <&clk32k>, <&main_xtal>;
+ clock-names = "slow_clk", "main_xtal";
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/atmel,at91sam9x5-sckc.yaml b/Documentation/devicetree/bindings/clock/atmel,at91sam9x5-sckc.yaml
new file mode 100644
index 000000000000..7be29877e6d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/atmel,at91sam9x5-sckc.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/atmel,at91sam9x5-sckc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel Slow Clock Controller (SCKC)
+
+maintainers:
+ - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - atmel,at91sam9x5-sckc
+ - atmel,sama5d3-sckc
+ - atmel,sama5d4-sckc
+ - microchip,sam9x60-sckc
+ - items:
+ - const: microchip,sama7g5-sckc
+ - const: microchip,sam9x60-sckc
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ "#clock-cells":
+ enum: [0, 1]
+
+ atmel,osc-bypass:
+ type: boolean
+ description: set when a clock signal is directly provided on XIN
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - "#clock-cells"
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - microchip,sam9x60-sckc
+ then:
+ properties:
+ "#clock-cells":
+ const: 1
+ else:
+ properties:
+ "#clock-cells":
+ const: 0
+
+additionalProperties: false
+
+examples:
+ - |
+ clk32k: clock-controller@fffffe50 {
+ compatible = "microchip,sam9x60-sckc";
+ reg = <0xfffffe50 0x4>;
+ clocks = <&slow_xtal>;
+ #clock-cells = <1>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm63268-timer-clocks.yaml b/Documentation/devicetree/bindings/clock/brcm,bcm63268-timer-clocks.yaml
index 199818b2fb6d..cd0d763ce2f3 100644
--- a/Documentation/devicetree/bindings/clock/brcm,bcm63268-timer-clocks.yaml
+++ b/Documentation/devicetree/bindings/clock/brcm,bcm63268-timer-clocks.yaml
@@ -4,7 +4,7 @@
$id: http://devicetree.org/schemas/clock/brcm,bcm63268-timer-clocks.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Broadcom BCM63268 Timer Clock and Reset Device Tree Bindings
+title: Broadcom BCM63268 Timer Clock and Reset
maintainers:
- Álvaro Fernández Rojas <noltari@gmail.com>
diff --git a/Documentation/devicetree/bindings/clock/imx8m-clock.yaml b/Documentation/devicetree/bindings/clock/imx8m-clock.yaml
index 0dbc1433fede..80539f88bc27 100644
--- a/Documentation/devicetree/bindings/clock/imx8m-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx8m-clock.yaml
@@ -24,6 +24,9 @@ properties:
reg:
maxItems: 1
+ interrupts:
+ maxItems: 2
+
clocks:
minItems: 6
maxItems: 7
diff --git a/Documentation/devicetree/bindings/clock/imx8mp-audiomix.yaml b/Documentation/devicetree/bindings/clock/imx8mp-audiomix.yaml
index ff9600474df2..0a6dc1a6e122 100644
--- a/Documentation/devicetree/bindings/clock/imx8mp-audiomix.yaml
+++ b/Documentation/devicetree/bindings/clock/imx8mp-audiomix.yaml
@@ -4,7 +4,7 @@
$id: http://devicetree.org/schemas/clock/imx8mp-audiomix.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: NXP i.MX8MP AudioMIX Block Control Binding
+title: NXP i.MX8MP AudioMIX Block Control
maintainers:
- Marek Vasut <marex@denx.de>
diff --git a/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml b/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml
index 9e733b10c392..509df06b9c9d 100644
--- a/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml
+++ b/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml
@@ -98,9 +98,9 @@ required:
patternProperties:
"^usb-phy@[a-f0-9]+$":
- allOf: [ $ref: "../phy/ingenic,phy-usb.yaml#" ]
+ $ref: /schemas/phy/ingenic,phy-usb.yaml#
"^mac-phy-ctrl@[a-f0-9]+$":
- allOf: [ $ref: "../net/ingenic,mac.yaml#" ]
+ $ref: /schemas/net/ingenic,mac.yaml#
additionalProperties: false
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mtmips-sysc.yaml b/Documentation/devicetree/bindings/clock/mediatek,mtmips-sysc.yaml
new file mode 100644
index 000000000000..ba7ffc5b16a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,mtmips-sysc.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mtmips-sysc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MTMIPS SoCs System Controller
+
+maintainers:
+ - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description: |
+ MediaTek MIPS and Ralink SoCs provides a system controller to allow
+ to access to system control registers. These registers include clock
+ and reset related ones so this node is both clock and reset provider
+ for the rest of the world.
+
+ These SoCs have an XTAL from where the cpu clock is
+ provided as well as derived clocks for the bus and the peripherals.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - ralink,mt7620-sysc
+ - ralink,mt7628-sysc
+ - ralink,mt7688-sysc
+ - ralink,rt2880-sysc
+ - ralink,rt3050-sysc
+ - ralink,rt3052-sysc
+ - ralink,rt3352-sysc
+ - ralink,rt3883-sysc
+ - ralink,rt5350-sysc
+ - const: syscon
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ description:
+ The first cell indicates the clock number.
+ const: 1
+
+ '#reset-cells':
+ description:
+ The first cell indicates the reset bit within the register.
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+ - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ syscon@0 {
+ compatible = "ralink,rt5350-sysc", "syscon";
+ reg = <0x0 0x100>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/nuvoton,ma35d1-clk.yaml b/Documentation/devicetree/bindings/clock/nuvoton,ma35d1-clk.yaml
new file mode 100644
index 000000000000..8f0c43683729
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nuvoton,ma35d1-clk.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/nuvoton,ma35d1-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton MA35D1 Clock Controller Module
+
+maintainers:
+ - Chi-Fang Li <cfli0@nuvoton.com>
+ - Jacky Huang <ychuang3@nuvoton.com>
+
+description: |
+ The MA35D1 clock controller generates clocks for the whole chip,
+ including system clocks and all peripheral clocks.
+
+ See also:
+ include/dt-bindings/clock/ma35d1-clk.h
+
+properties:
+ compatible:
+ items:
+ - const: nuvoton,ma35d1-clk
+
+ reg:
+ maxItems: 1
+
+ "#clock-cells":
+ const: 1
+
+ clocks:
+ maxItems: 1
+
+ nuvoton,pll-mode:
+ description:
+ A list of PLL operation mode corresponding to CAPLL, DDRPLL, APLL,
+ EPLL, and VPLL in sequential.
+ maxItems: 5
+ items:
+ enum:
+ - integer
+ - fractional
+ - spread-spectrum
+ $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+
+required:
+ - compatible
+ - reg
+ - "#clock-cells"
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+
+ clock-controller@40460200 {
+ compatible = "nuvoton,ma35d1-clk";
+ reg = <0x40460200 0x100>;
+ #clock-cells = <1>;
+ clocks = <&clk_hxt>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml b/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml
index 659669bf224b..9436266828af 100644
--- a/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml
@@ -19,6 +19,7 @@ properties:
- qcom,ipq5332-a53pll
- qcom,ipq6018-a53pll
- qcom,ipq8074-a53pll
+ - qcom,ipq9574-a73pll
- qcom,msm8916-a53pll
- qcom,msm8939-a53pll
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8953.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8953.yaml
new file mode 100644
index 000000000000..fe9fd4cb185f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8953.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8953.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on MSM8953
+
+maintainers:
+ - Adam Skladowski <a_skl39@protonmail.com>
+ - Sireesh Kodali <sireeshkodali@protonmail.com>
+
+description: |
+ Qualcomm global clock control module provides the clocks, resets and power
+ domains on MSM8953.
+
+ See also: include/dt-bindings/clock/qcom,gcc-msm8953.h
+
+properties:
+ compatible:
+ const: qcom,gcc-msm8953
+
+ clocks:
+ items:
+ - description: Board XO source
+ - description: Sleep clock source
+ - description: Byte clock from DSI PHY0
+ - description: Pixel clock from DSI PHY0
+ - description: Byte clock from DSI PHY1
+ - description: Pixel clock from DSI PHY1
+
+ clock-names:
+ items:
+ - const: xo
+ - const: sleep
+ - const: dsi0pll
+ - const: dsi0pllbyte
+ - const: dsi1pll
+ - const: dsi1pllbyte
+
+required:
+ - compatible
+ - clocks
+ - clock-names
+
+allOf:
+ - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,rpmcc.h>
+
+ clock-controller@1800000 {
+ compatible = "qcom,gcc-msm8953";
+ reg = <0x01800000 0x80000>;
+ clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+ <&sleep_clk>,
+ <&dsi0_phy 1>,
+ <&dsi0_phy 0>,
+ <&dsi1_phy 1>,
+ <&dsi1_phy 0>;
+ clock-names = "xo",
+ "sleep",
+ "dsi0pll",
+ "dsi0pllbyte",
+ "dsi1pll",
+ "dsi1pllbyte";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml
index ae01e7749534..ba969e7a57bf 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml
@@ -30,7 +30,6 @@ properties:
enum:
- qcom,gcc-ipq6018
- qcom,gcc-mdm9607
- - qcom,gcc-msm8953
- qcom,gcc-mdm9615
required:
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml
index 06dce0c6b7d0..8bf9b6f49550 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml
@@ -32,6 +32,10 @@ properties:
- const: bi_tcxo_ao
- const: sleep_clk
+ power-domains:
+ items:
+ - description: CX domain
+
required:
- compatible
- clocks
@@ -45,6 +49,8 @@ unevaluatedProperties: false
examples:
- |
#include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
clock-controller@100000 {
compatible = "qcom,gcc-sc7180";
reg = <0x00100000 0x1f0000>;
@@ -52,6 +58,7 @@ examples:
<&rpmhcc RPMH_CXO_CLK_A>,
<&sleep_clk>;
clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+ power-domains = <&rpmhpd SC7180_CX>;
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml
index 947b47168cec..ff0b18bbb0fc 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml
@@ -43,6 +43,10 @@ properties:
- const: ufs_phy_tx_symbol_0_clk
- const: usb3_phy_wrapper_gcc_usb30_pipe_clk
+ power-domains:
+ items:
+ - description: CX domain
+
required:
- compatible
- clocks
@@ -56,6 +60,8 @@ unevaluatedProperties: false
examples:
- |
#include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
clock-controller@100000 {
compatible = "qcom,gcc-sc7280";
reg = <0x00100000 0x1f0000>;
@@ -71,6 +77,7 @@ examples:
"pcie_1_pipe_clk", "ufs_phy_rx_symbol_0_clk",
"ufs_phy_rx_symbol_1_clk", "ufs_phy_tx_symbol_0_clk",
"usb3_phy_wrapper_gcc_usb30_pipe_clk";
+ power-domains = <&rpmhpd SC7280_CX>;
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml
index b752542ee20c..ead6665b9a45 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml
@@ -23,11 +23,13 @@ properties:
clocks:
items:
- description: Board XO source
+ - description: Board active XO source
- description: Sleep clock source
clock-names:
items:
- const: bi_tcxo
+ - const: bi_tcxo_ao
- const: sleep_clk
required:
@@ -47,8 +49,9 @@ examples:
compatible = "qcom,gcc-sm8250";
reg = <0x00100000 0x1f0000>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&rpmhcc RPMH_CXO_CLK_A>,
<&sleep_clk>;
- clock-names = "bi_tcxo", "sleep_clk";
+ clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
diff --git a/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml
index 1e3dc9deded9..a00216b3b15a 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml
@@ -50,6 +50,9 @@ properties:
- const: gcc_gpu_gpll0_clk_src
- const: gcc_gpu_gpll0_div_clk_src
+ power-domains:
+ maxItems: 1
+
'#clock-cells':
const: 1
diff --git a/Documentation/devicetree/bindings/clock/qcom,ipq9574-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,ipq9574-gcc.yaml
index afc68eb9d7cc..944a0ea79cd6 100644
--- a/Documentation/devicetree/bindings/clock/qcom,ipq9574-gcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,ipq9574-gcc.yaml
@@ -7,6 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm Global Clock & Reset Controller on IPQ9574
maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
- Anusha Rao <quic_anusha@quicinc.com>
description: |
diff --git a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
index acf0c923c24f..422f5776a771 100644
--- a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
@@ -31,11 +31,11 @@ properties:
- qcom,mmcc-sdm660
clocks:
- minItems: 8
+ minItems: 7
maxItems: 13
clock-names:
- minItems: 8
+ minItems: 7
maxItems: 13
'#clock-cells':
@@ -104,6 +104,34 @@ allOf:
compatible:
contains:
enum:
+ - qcom,mmcc-msm8226
+ then:
+ properties:
+ clocks:
+ items:
+ - description: Board XO source
+ - description: MMSS GPLL0 voted clock
+ - description: GPLL0 voted clock
+ - description: GPLL1 voted clock
+ - description: GFX3D clock source
+ - description: DSI phy instance 0 dsi clock
+ - description: DSI phy instance 0 byte clock
+
+ clock-names:
+ items:
+ - const: xo
+ - const: mmss_gpll0_vote
+ - const: gpll0_vote
+ - const: gpll1_vote
+ - const: gfx3d_clk_src
+ - const: dsi0pll
+ - const: dsi0pllbyte
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
- qcom,mmcc-msm8974
then:
properties:
diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml
index d5a250b7c2af..267cf8c26823 100644
--- a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml
@@ -27,6 +27,7 @@ properties:
- qcom,sdm845-rpmh-clk
- qcom,sdx55-rpmh-clk
- qcom,sdx65-rpmh-clk
+ - qcom,sdx75-rpmh-clk
- qcom,sm6350-rpmh-clk
- qcom,sm8150-rpmh-clk
- qcom,sm8250-rpmh-clk
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc8280xp-lpasscc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc8280xp-lpasscc.yaml
new file mode 100644
index 000000000000..3326dcd6766c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sc8280xp-lpasscc.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sc8280xp-lpasscc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm LPASS Core & Audio Clock Controller on SC8280XP
+
+maintainers:
+ - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+ Qualcomm LPASS core and audio clock control module provides the clocks,
+ and reset on SC8280XP.
+
+ See also::
+ include/dt-bindings/clock/qcom,lpasscc-sc8280xp.h
+
+properties:
+ compatible:
+ enum:
+ - qcom,sc8280xp-lpassaudiocc
+ - qcom,sc8280xp-lpasscc
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+ '#reset-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+ - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,sc8280xp-lpasscc.h>
+ lpass_audiocc: clock-controller@32a9000 {
+ compatible = "qcom,sc8280xp-lpassaudiocc";
+ reg = <0x032a9000 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ - |
+ #include <dt-bindings/clock/qcom,sc8280xp-lpasscc.h>
+ lpasscc: clock-controller@33e0000 {
+ compatible = "qcom,sc8280xp-lpasscc";
+ reg = <0x033e0000 0x12000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sdx75-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdx75-gcc.yaml
new file mode 100644
index 000000000000..98921fa236b1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sdx75-gcc.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sdx75-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SDX75
+
+maintainers:
+ - Imran Shaik <quic_imrashai@quicinc.com>
+ - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+ Qualcomm global clock control module provides the clocks, resets and power
+ domains on SDX75
+
+ See also:: include/dt-bindings/clock/qcom,sdx75-gcc.h
+
+properties:
+ compatible:
+ const: qcom,sdx75-gcc
+
+ clocks:
+ items:
+ - description: Board XO source
+ - description: Sleep clock source
+ - description: EMAC0 sgmiiphy mac rclk source
+ - description: EMAC0 sgmiiphy mac tclk source
+ - description: EMAC0 sgmiiphy rclk source
+ - description: EMAC0 sgmiiphy tclk source
+ - description: EMAC1 sgmiiphy mac rclk source
+ - description: EMAC1 sgmiiphy mac tclk source
+ - description: EMAC1 sgmiiphy rclk source
+ - description: EMAC1 sgmiiphy tclk source
+ - description: PCIE20 phy aux clock source
+ - description: PCIE_1 Pipe clock source
+ - description: PCIE_2 Pipe clock source
+ - description: PCIE Pipe clock source
+ - description: USB3 phy wrapper pipe clock source
+
+required:
+ - compatible
+ - clocks
+
+allOf:
+ - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ clock-controller@80000 {
+ compatible = "qcom,sdx75-gcc";
+ reg = <0x80000 0x1f7400>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>, <&emac0_sgmiiphy_mac_rclk>,
+ <&emac0_sgmiiphy_mac_tclk>, <&emac0_sgmiiphy_rclk>, <&emac0_sgmiiphy_tclk>,
+ <&emac1_sgmiiphy_mac_rclk>, <&emac1_sgmiiphy_mac_tclk>, <&emac1_sgmiiphy_rclk>,
+ <&emac1_sgmiiphy_tclk>, <&pcie20_phy_aux_clk>, <&pcie_1_pipe_clk>,
+ <&pcie_2_pipe_clk>, <&pcie_pipe_clk>, <&usb3_phy_wrapper_gcc_usb30_pipe_clk>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm6375-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm6375-gpucc.yaml
index b480ead5bd69..cf4cad76f6c9 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sm6375-gpucc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sm6375-gpucc.yaml
@@ -27,9 +27,21 @@ properties:
- description: GPLL0 div branch source
- description: SNoC DVM GFX source
+ power-domains:
+ description:
+ A phandle and PM domain specifier for the VDD_GX power rail
+ maxItems: 1
+
+ required-opps:
+ description:
+ A phandle to an OPP node describing required VDD_GX performance point.
+ maxItems: 1
+
required:
- compatible
- clocks
+ - power-domains
+ - required-opps
allOf:
- $ref: qcom,gcc.yaml#
@@ -40,6 +52,7 @@ examples:
- |
#include <dt-bindings/clock/qcom,sm6375-gcc.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
soc {
#address-cells = <2>;
@@ -52,6 +65,8 @@ examples:
<&gcc GCC_GPU_GPLL0_CLK_SRC>,
<&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>,
<&gcc GCC_GPU_SNOC_DVM_GFX_CLK>;
+ power-domains = <&rpmpd SM6375_VDDGX>;
+ required-opps = <&rpmpd_opp_low_svs>;
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml
new file mode 100644
index 000000000000..23505c8c3dbd
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8350-videocc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8350 Video Clock & Reset Controller
+
+maintainers:
+ - Konrad Dybcio <konrad.dybcio@linaro.org>
+
+description: |
+ Qualcomm video clock control module provides the clocks, resets and power
+ domains on Qualcomm SoCs.
+
+ See also::
+ include/dt-bindings/clock/qcom,videocc-sm8350.h
+ include/dt-bindings/reset/qcom,videocc-sm8350.h
+
+properties:
+ compatible:
+ const: qcom,sm8350-videocc
+
+ clocks:
+ items:
+ - description: Board XO source
+ - description: Board active XO source
+ - description: Board sleep clock
+
+ power-domains:
+ description:
+ A phandle and PM domain specifier for the MMCX power domain.
+ maxItems: 1
+
+ required-opps:
+ description:
+ A phandle to an OPP node describing required MMCX performance point.
+ maxItems: 1
+
+required:
+ - compatible
+ - clocks
+ - power-domains
+ - required-opps
+
+allOf:
+ - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ clock-controller@abf0000 {
+ compatible = "qcom,sm8350-videocc";
+ reg = <0x0abf0000 0x10000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&rpmhcc RPMH_CXO_CLK_A>,
+ <&sleep_clk>;
+ power-domains = <&rpmhpd SM8350_MMCX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-gpucc.yaml
new file mode 100644
index 000000000000..2320be920a5f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-gpucc.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8450-gpucc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Graphics Clock & Reset Controller on SM8450
+
+maintainers:
+ - Konrad Dybcio <konrad.dybcio@linaro.org>
+
+description: |
+ Qualcomm graphics clock control module provides the clocks, resets and power
+ domains on Qualcomm SoCs.
+
+ See also::
+ include/dt-bindings/clock/qcom,sm8450-gpucc.h
+ include/dt-bindings/clock/qcom,sm8550-gpucc.h
+ include/dt-bindings/reset/qcom,sm8450-gpucc.h
+
+properties:
+ compatible:
+ enum:
+ - qcom,sm8450-gpucc
+ - qcom,sm8550-gpucc
+
+ clocks:
+ items:
+ - description: Board XO source
+ - description: GPLL0 main branch source
+ - description: GPLL0 div branch source
+
+ '#clock-cells':
+ const: 1
+
+ '#reset-cells':
+ const: 1
+
+ '#power-domain-cells':
+ const: 1
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - '#clock-cells'
+ - '#reset-cells'
+ - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-sm8450.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ clock-controller@3d90000 {
+ compatible = "qcom,sm8450-gpucc";
+ reg = <0 0x03d90000 0 0xa000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+ <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml
new file mode 100644
index 000000000000..f1c6dd50f184
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8450-videocc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Video Clock & Reset Controller on SM8450
+
+maintainers:
+ - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+ Qualcomm video clock control module provides the clocks, resets and power
+ domains on SM8450.
+
+ See also:: include/dt-bindings/clock/qcom,videocc-sm8450.h
+
+properties:
+ compatible:
+ enum:
+ - qcom,sm8450-videocc
+ - qcom,sm8550-videocc
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Board XO source
+ - description: Video AHB clock from GCC
+
+ power-domains:
+ maxItems: 1
+ description:
+ MMCX power domain.
+
+ required-opps:
+ maxItems: 1
+ description:
+ A phandle to an OPP node describing required MMCX performance point.
+
+ '#clock-cells':
+ const: 1
+
+ '#reset-cells':
+ const: 1
+
+ '#power-domain-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - power-domains
+ - required-opps
+ - '#clock-cells'
+ - '#reset-cells'
+ - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-sm8450.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+ videocc: clock-controller@aaf0000 {
+ compatible = "qcom,sm8450-videocc";
+ reg = <0x0aaf0000 0x10000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_VIDEO_AHB_CLK>;
+ power-domains = <&rpmhpd SM8450_MMCX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml b/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml
index 99686085f751..26d94cedc871 100644
--- a/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml
+++ b/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml
@@ -48,7 +48,7 @@ properties:
patternProperties:
"^dma-router@[a-f0-9]+$":
type: object
- $ref: "../dma/renesas,rzn1-dmamux.yaml#"
+ $ref: /schemas/dma/renesas,rzn1-dmamux.yaml#
required:
- compatible
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml
index 0589a63e273a..a36781a455b6 100644
--- a/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml
@@ -24,6 +24,7 @@ properties:
- samsung,exynos3250-cmu-dmc
- samsung,exynos3250-cmu-isp
- samsung,exynos4210-clock
+ - samsung,exynos4212-clock
- samsung,exynos4412-clock
- samsung,exynos5250-clock
- items:
diff --git a/Documentation/devicetree/bindings/clock/ti,am62-audio-refclk.yaml b/Documentation/devicetree/bindings/clock/ti,am62-audio-refclk.yaml
new file mode 100644
index 000000000000..b2e40bd39a3a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti,am62-audio-refclk.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ti,am62-audio-refclk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI Audio Reference Clock
+
+maintainers:
+ - Jai Luthra <j-luthra@ti.com>
+
+properties:
+ compatible:
+ items:
+ - const: ti,am62-audio-refclk
+
+ reg:
+ maxItems: 1
+
+ "#clock-cells":
+ const: 0
+
+ clocks:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - "#clock-cells"
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ audio_refclk0: clock@82e0 {
+ compatible = "ti,am62-audio-refclk";
+ reg = <0x82e0 0x4>;
+ clocks = <&k3_clks 157 0>;
+ assigned-clocks = <&k3_clks 157 0>;
+ assigned-clock-parents = <&k3_clks 157 8>;
+ #clock-cells = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml b/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml
index 66765116aff5..64b8bce5962c 100644
--- a/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml
+++ b/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml
@@ -16,7 +16,6 @@ properties:
- ti,am654-ehrpwm-tbclk
- ti,am64-epwm-tbclk
- ti,am62-epwm-tbclk
- - const: syscon
"#clock-cells":
const: 1
@@ -33,8 +32,8 @@ additionalProperties: false
examples:
- |
- ehrpwm_tbclk: syscon@4140 {
- compatible = "ti,am654-ehrpwm-tbclk", "syscon";
+ ehrpwm_tbclk: clock@4140 {
+ compatible = "ti,am654-ehrpwm-tbclk";
reg = <0x4140 0x18>;
#clock-cells = <1>;
};
diff --git a/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml b/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml
index c1f04830a832..02bd556bd91a 100644
--- a/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml
+++ b/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Xilinx clocking wizard
maintainers:
- - Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
+ - Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
description:
The clocking wizard is a soft ip clocking block of Xilinx versal. It
diff --git a/Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml b/Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml
index 229af98b1d30..d3dd9c2c3019 100644
--- a/Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml
@@ -7,17 +7,13 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Xilinx Versal clock controller
maintainers:
- - Michal Simek <michal.simek@xilinx.com>
- - Jolly Shah <jolly.shah@xilinx.com>
- - Rajan Vaja <rajan.vaja@xilinx.com>
+ - Michal Simek <michal.simek@amd.com>
description: |
The clock controller is a hardware block of Xilinx versal clock tree. It
reads required input clock frequencies from the devicetree and acts as clock
provider for all clock consumers of PS clocks.
-select: false
-
properties:
compatible:
const: xlnx,versal-clk
diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml
index ae515651fc6b..1c4d3eb87763 100644
--- a/Documentation/devicetree/bindings/connector/usb-connector.yaml
+++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml
@@ -168,6 +168,13 @@ properties:
offer the power, Capability Mismatch is set. Required for power sink and
power dual role.
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: OF graph bindings modeling a data bus to the connector, e.g.
+ there is a single High Speed (HS) port present in this connector. If there
+ is more than one bus (several port, with 'reg' property), they can be grouped
+ under 'ports'.
+
ports:
$ref: /schemas/graph.yaml#/properties/ports
description: OF graph bindings modeling any data bus to the connector
@@ -322,6 +329,19 @@ examples:
};
};
+ # USB-C connector attached to SoC with a single High-Speed controller
+ - |
+ connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+
+ port {
+ high_speed_ep: endpoint {
+ remote-endpoint = <&usb_hs_ep>;
+ };
+ };
+ };
+
# USB-C connector attached to SoC and USB3 typec port controller(hd3ss3220)
# with SS 2:1 MUX. HS lines routed to SoC, SS lines routed to the MUX and
# the output of MUX is connected to the SoC.
diff --git a/Documentation/devicetree/bindings/cpu/idle-states.yaml b/Documentation/devicetree/bindings/cpu/idle-states.yaml
index b8cc826c9501..b3a5356f9916 100644
--- a/Documentation/devicetree/bindings/cpu/idle-states.yaml
+++ b/Documentation/devicetree/bindings/cpu/idle-states.yaml
@@ -259,7 +259,7 @@ description: |+
http://infocenter.arm.com/help/index.jsp
[5] ARM Linux Kernel documentation - Booting AArch64 Linux
- Documentation/arm64/booting.rst
+ Documentation/arch/arm64/booting.rst
[6] RISC-V Linux Kernel documentation - CPUs bindings
Documentation/devicetree/bindings/riscv/cpus.yaml
diff --git a/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml b/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml
index 6f5e7904181f..7e1bb992ce90 100644
--- a/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml
+++ b/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml
@@ -28,6 +28,7 @@ select:
- qcom,apq8064
- qcom,apq8096
- qcom,ipq8064
+ - qcom,ipq8074
- qcom,msm8939
- qcom,msm8960
- qcom,msm8974
diff --git a/Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml b/Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml
index ecf98a9e72b2..948e11ebe4ee 100644
--- a/Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml
+++ b/Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml
@@ -19,8 +19,8 @@ properties:
interrupts:
items:
- - description: "Interrupt for flow 0"
- - description: "Interrupt for flow 1"
+ - description: Interrupt for flow 0
+ - description: Interrupt for flow 1
clocks:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0-mon.yaml b/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0-mon.yaml
index 286dffa0671b..e879bc0be8e2 100644
--- a/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0-mon.yaml
+++ b/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0-mon.yaml
@@ -103,6 +103,12 @@ properties:
wakeup-source: true
linux,keycode:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 116
+ deprecated: true
+
+ linux,keycodes:
+ maxItems: 1
default: 116
required:
diff --git a/Documentation/devicetree/bindings/crypto/fsl-dcp.yaml b/Documentation/devicetree/bindings/crypto/fsl-dcp.yaml
index 99be01539fcd..8dd36c2f76fd 100644
--- a/Documentation/devicetree/bindings/crypto/fsl-dcp.yaml
+++ b/Documentation/devicetree/bindings/crypto/fsl-dcp.yaml
@@ -11,9 +11,15 @@ maintainers:
properties:
compatible:
- enum:
- - fsl,imx23-dcp
- - fsl,imx28-dcp
+ oneOf:
+ - enum:
+ - fsl,imx23-dcp
+ - fsl,imx28-dcp
+ - items:
+ - enum:
+ - fsl,imx6sl-dcp
+ - fsl,imx6ull-dcp
+ - const: fsl,imx28-dcp
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml b/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml
index e0fe63957888..a4006237aa89 100644
--- a/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml
+++ b/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml
@@ -2,8 +2,8 @@
# Copyright 2018 Linaro Ltd.
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/crypto/intel,ixp4xx-crypto.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/crypto/intel,ixp4xx-crypto.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Intel IXP4xx cryptographic engine
@@ -21,7 +21,7 @@ properties:
const: intel,ixp4xx-crypto
intel,npe-handle:
- $ref: '/schemas/types.yaml#/definitions/phandle-array'
+ $ref: /schemas/types.yaml#/definitions/phandle-array
items:
- items:
- description: phandle to the NPE this crypto engine
diff --git a/Documentation/devicetree/bindings/crypto/qcom-qce.yaml b/Documentation/devicetree/bindings/crypto/qcom-qce.yaml
index e375bd981300..bb828068c3b8 100644
--- a/Documentation/devicetree/bindings/crypto/qcom-qce.yaml
+++ b/Documentation/devicetree/bindings/crypto/qcom-qce.yaml
@@ -26,10 +26,18 @@ properties:
- items:
- enum:
+ - qcom,ipq4019-qce
+ - qcom,sm8150-qce
+ - const: qcom,qce
+
+ - items:
+ - enum:
- qcom,ipq6018-qce
- qcom,ipq8074-qce
- qcom,msm8996-qce
+ - qcom,qcm2290-qce
- qcom,sdm845-qce
+ - qcom,sm6115-qce
- const: qcom,ipq4019-qce
- const: qcom,qce
@@ -46,16 +54,12 @@ properties:
maxItems: 1
clocks:
- items:
- - description: iface clocks register interface.
- - description: bus clocks data transfer interface.
- - description: core clocks rest of the crypto block.
+ minItems: 1
+ maxItems: 3
clock-names:
- items:
- - const: iface
- - const: bus
- - const: core
+ minItems: 1
+ maxItems: 3
iommus:
minItems: 1
@@ -89,9 +93,37 @@ allOf:
enum:
- qcom,crypto-v5.1
- qcom,crypto-v5.4
- - qcom,ipq4019-qce
+ - qcom,ipq6018-qce
+ - qcom,ipq8074-qce
+ - qcom,msm8996-qce
+ - qcom,sdm845-qce
+ then:
+ properties:
+ clocks:
+ maxItems: 3
+ clock-names:
+ items:
+ - const: iface
+ - const: bus
+ - const: core
+ required:
+ - clocks
+ - clock-names
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,qcm2290-qce
+ - qcom,sm6115-qce
then:
+ properties:
+ clocks:
+ maxItems: 1
+ clock-names:
+ items:
+ - const: core
required:
- clocks
- clock-names
diff --git a/Documentation/devicetree/bindings/crypto/starfive,jh7110-crypto.yaml b/Documentation/devicetree/bindings/crypto/starfive,jh7110-crypto.yaml
new file mode 100644
index 000000000000..71a2876bd6e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/starfive,jh7110-crypto.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/starfive,jh7110-crypto.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive Cryptographic Module
+
+maintainers:
+ - Jia Jie Ho <jiajie.ho@starfivetech.com>
+ - William Qiu <william.qiu@starfivetech.com>
+
+properties:
+ compatible:
+ const: starfive,jh7110-crypto
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Hardware reference clock
+ - description: AHB reference clock
+
+ clock-names:
+ items:
+ - const: hclk
+ - const: ahb
+
+ interrupts:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ dmas:
+ items:
+ - description: TX DMA channel
+ - description: RX DMA channel
+
+ dma-names:
+ items:
+ - const: tx
+ - const: rx
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - resets
+ - dmas
+ - dma-names
+
+additionalProperties: false
+
+examples:
+ - |
+ crypto: crypto@16000000 {
+ compatible = "starfive,jh7110-crypto";
+ reg = <0x16000000 0x4000>;
+ clocks = <&clk 15>, <&clk 16>;
+ clock-names = "hclk", "ahb";
+ interrupts = <28>;
+ resets = <&reset 3>;
+ dmas = <&dma 1 2>,
+ <&dma 0 2>;
+ dma-names = "tx", "rx";
+ };
+...
diff --git a/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.yaml b/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.yaml
index 9e8fbd02b150..8aead97a585b 100644
--- a/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.yaml
+++ b/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.yaml
@@ -7,8 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Xilinx ZynqMP AES-GCM Hardware Accelerator
maintainers:
- - Kalyani Akula <kalyani.akula@xilinx.com>
- - Michal Simek <michal.simek@xilinx.com>
+ - Kalyani Akula <kalyani.akula@amd.com>
+ - Michal Simek <michal.simek@amd.com>
description: |
The ZynqMP AES-GCM hardened cryptographic accelerator is used to
diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-g12a-dw-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-g12a-dw-mipi-dsi.yaml
new file mode 100644
index 000000000000..a3428f012005
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/amlogic,meson-g12a-dw-mipi-dsi.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 BayLibre, SAS
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/amlogic,meson-g12a-dw-mipi-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic specific extensions to the Synopsys Designware MIPI DSI Host Controller
+
+maintainers:
+ - Neil Armstrong <neil.armstrong@linaro.org>
+
+description: |
+ The Amlogic Meson Synopsys Designware Integration is composed of
+ - A Synopsys DesignWare MIPI DSI Host Controller IP
+ - A TOP control block controlling the Clocks & Resets of the IP
+
+allOf:
+ - $ref: dsi-controller.yaml#
+
+properties:
+ compatible:
+ enum:
+ - amlogic,meson-g12a-dw-mipi-dsi
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ minItems: 3
+ maxItems: 4
+
+ clock-names:
+ minItems: 3
+ items:
+ - const: pclk
+ - const: bit
+ - const: px
+ - const: meas
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ items:
+ - const: top
+
+ phys:
+ maxItems: 1
+
+ phy-names:
+ items:
+ - const: dphy
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Input node to receive pixel data.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: DSI output node to panel.
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+ - phys
+ - phy-names
+ - ports
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ dsi@6000 {
+ compatible = "amlogic,meson-g12a-dw-mipi-dsi";
+ reg = <0x6000 0x400>;
+ resets = <&reset_top>;
+ reset-names = "top";
+ clocks = <&clk_pclk>, <&bit_clk>, <&clk_px>;
+ clock-names = "pclk", "bit", "px";
+ phys = <&mipi_dphy>;
+ phy-names = "dphy";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* VPU VENC Input */
+ mipi_dsi_venc_port: port@0 {
+ reg = <0>;
+
+ mipi_dsi_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+
+ /* DSI Output */
+ mipi_dsi_panel_port: port@1 {
+ reg = <1>;
+
+ mipi_out_panel: endpoint {
+ remote-endpoint = <&mipi_in_panel>;
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
index 0c72120acc4f..cb0a90f02321 100644
--- a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
+++ b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
@@ -96,6 +96,11 @@ properties:
description:
A port node pointing to the HDMI-TX port node.
+ port@2:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ A port node pointing to the DPI port node (e.g. DSI or LVDS transceiver).
+
"#address-cells":
const: 1
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml
index c9b06885cc63..62f0521b0924 100644
--- a/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml
@@ -26,6 +26,7 @@ properties:
const: dp
force-hpd:
+ type: boolean
description:
Indicate driver need force hpd when hpd detect failed, this
is used for some eDP screen which don not have a hpd signal.
diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml
index 6e0e3ba9b49e..07388bf2b90d 100644
--- a/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml
@@ -17,6 +17,7 @@ description: |
properties:
compatible:
enum:
+ - fsl,imx6sx-ldb
- fsl,imx8mp-ldb
- fsl,imx93-ldb
@@ -64,7 +65,9 @@ allOf:
properties:
compatible:
contains:
- const: fsl,imx93-ldb
+ enum:
+ - fsl,imx6sx-ldb
+ - fsl,imx93-ldb
then:
properties:
ports:
diff --git a/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml b/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml
index c4bf54397473..21d995f29a1e 100644
--- a/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml
@@ -20,6 +20,7 @@ properties:
maxItems: 1
video-ports:
+ $ref: /schemas/types.yaml#/definitions/uint32
default: 0x230145
maximum: 0xffffff
description:
diff --git a/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml b/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml
index e841659e20cd..4ed7a799ba26 100644
--- a/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml
@@ -70,7 +70,9 @@ properties:
samsung,burst-clock-frequency:
$ref: /schemas/types.yaml#/definitions/uint32
description:
- DSIM high speed burst mode frequency.
+ DSIM high speed burst mode frequency. If absent,
+ the pixel clock from the attached device or bridge
+ will be used instead.
samsung,esc-clock-frequency:
$ref: /schemas/types.yaml#/definitions/uint32
@@ -80,7 +82,8 @@ properties:
samsung,pll-clock-frequency:
$ref: /schemas/types.yaml#/definitions/uint32
description:
- DSIM oscillator clock frequency.
+ DSIM oscillator clock frequency. If absent, the clock frequency
+ of sclk_mipi will be used instead.
phys:
maxItems: 1
@@ -100,20 +103,42 @@ properties:
specified.
port@1:
- $ref: /schemas/graph.yaml#/properties/port
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
description:
DSI output port node to the panel or the next bridge
in the chain.
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+ uniqueItems: true
+ items:
+ enum: [ 1, 2, 3, 4 ]
+
+ lane-polarities:
+ minItems: 1
+ maxItems: 5
+ description:
+ The Samsung MIPI DSI IP requires that all the data lanes have
+ the same polarity.
+
+ dependencies:
+ lane-polarities: [data-lanes]
+
required:
- clock-names
- clocks
- compatible
- interrupts
- reg
- - samsung,burst-clock-frequency
- samsung,esc-clock-frequency
- - samsung,pll-clock-frequency
allOf:
- $ref: ../dsi-controller.yaml#
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml
index 81ca3cbc7abe..6c1de0b21722 100644
--- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml
@@ -21,6 +21,9 @@ properties:
maxItems: 1
description: virtual channel number of a DSI peripheral
+ reset-gpios:
+ maxItems: 1
+
vddc-supply:
description: Regulator for 1.2V internal core power.
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
index e1494b5007cb..0521261b04a9 100644
--- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
@@ -4,16 +4,24 @@
$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358767.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Toshiba TC358767 eDP bridge
+title: Toshiba TC358767/TC358867/TC9595 DSI/DPI/eDP bridge
maintainers:
- Andrey Gusakov <andrey.gusakov@cogentembedded.com>
-description: The TC358767 is bridge device which converts DSI/DPI to eDP/DP
+description: |
+ The TC358767/TC358867/TC9595 is bridge device which
+ converts DSI/DPI to eDP/DP .
properties:
compatible:
- const: toshiba,tc358767
+ oneOf:
+ - items:
+ - enum:
+ - toshiba,tc358867
+ - toshiba,tc9595
+ - const: toshiba,tc358767
+ - const: toshiba,tc358767
reg:
enum:
diff --git a/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml b/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml
index 83c0d008265b..3ee8f9225984 100644
--- a/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml
+++ b/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml
@@ -36,6 +36,9 @@ properties:
description: GPIO signal to enable DDC bus
maxItems: 1
+ hdmi-pwr-supply:
+ description: Power supply for the HDMI +5V Power pin
+
port:
$ref: /schemas/graph.yaml#/properties/port
description: Connection to controller providing HDMI signals
diff --git a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml
index 75b4efd70ba8..fc11ab5fc465 100644
--- a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml
+++ b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml
@@ -21,6 +21,7 @@ properties:
- fsl,imx28-lcdif
- fsl,imx6sx-lcdif
- fsl,imx8mp-lcdif
+ - fsl,imx93-lcdif
- items:
- enum:
- fsl,imx6sl-lcdif
@@ -88,7 +89,9 @@ allOf:
properties:
compatible:
contains:
- const: fsl,imx8mp-lcdif
+ enum:
+ - fsl,imx8mp-lcdif
+ - fsl,imx93-lcdif
then:
properties:
clocks:
@@ -107,6 +110,7 @@ allOf:
enum:
- fsl,imx6sx-lcdif
- fsl,imx8mp-lcdif
+ - fsl,imx93-lcdif
then:
properties:
clocks:
@@ -123,6 +127,7 @@ allOf:
- fsl,imx8mm-lcdif
- fsl,imx8mn-lcdif
- fsl,imx8mp-lcdif
+ - fsl,imx93-lcdif
then:
required:
- power-domains
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml
index 92741486c24d..7fd42c8fdc32 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml
@@ -27,6 +27,7 @@ properties:
- items:
- enum:
- mediatek,mt2712-disp-aal
+ - mediatek,mt6795-disp-aal
- const: mediatek,mt8173-disp-aal
- items:
- enum:
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml
index d0ea77fc4b06..f21e44092043 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml
@@ -33,6 +33,7 @@ properties:
- const: mediatek,mt2701-disp-color
- items:
- enum:
+ - mediatek,mt6795-disp-color
- mediatek,mt8183-disp-color
- mediatek,mt8186-disp-color
- mediatek,mt8188-disp-color
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
index d976380801e3..803c00f26206 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
@@ -17,15 +17,20 @@ description: |
properties:
compatible:
- enum:
- - mediatek,mt2701-dpi
- - mediatek,mt7623-dpi
- - mediatek,mt8173-dpi
- - mediatek,mt8183-dpi
- - mediatek,mt8186-dpi
- - mediatek,mt8188-dp-intf
- - mediatek,mt8192-dpi
- - mediatek,mt8195-dp-intf
+ oneOf:
+ - enum:
+ - mediatek,mt2701-dpi
+ - mediatek,mt7623-dpi
+ - mediatek,mt8173-dpi
+ - mediatek,mt8183-dpi
+ - mediatek,mt8186-dpi
+ - mediatek,mt8188-dp-intf
+ - mediatek,mt8192-dpi
+ - mediatek,mt8195-dp-intf
+ - items:
+ - enum:
+ - mediatek,mt6795-dpi
+ - const: mediatek,mt8183-dpi
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml
index 4707b60238b0..12441b937684 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml
@@ -22,13 +22,18 @@ allOf:
properties:
compatible:
- enum:
- - mediatek,mt2701-dsi
- - mediatek,mt7623-dsi
- - mediatek,mt8167-dsi
- - mediatek,mt8173-dsi
- - mediatek,mt8183-dsi
- - mediatek,mt8186-dsi
+ oneOf:
+ - enum:
+ - mediatek,mt2701-dsi
+ - mediatek,mt7623-dsi
+ - mediatek,mt8167-dsi
+ - mediatek,mt8173-dsi
+ - mediatek,mt8183-dsi
+ - mediatek,mt8186-dsi
+ - items:
+ - enum:
+ - mediatek,mt6795-dsi
+ - const: mediatek,mt8173-dsi
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml
index 6c2be9d6840b..c6641acd75d6 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml
@@ -26,6 +26,10 @@ properties:
- mediatek,mt8183-disp-gamma
- items:
- enum:
+ - mediatek,mt6795-disp-gamma
+ - const: mediatek,mt8173-disp-gamma
+ - items:
+ - enum:
- mediatek,mt8186-disp-gamma
- mediatek,mt8188-disp-gamma
- mediatek,mt8192-disp-gamma
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml
index 2f8e2f4dc3b8..eead5cb8636e 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml
@@ -24,6 +24,9 @@ properties:
- enum:
- mediatek,mt8173-disp-merge
- mediatek,mt8195-disp-merge
+ - items:
+ - const: mediatek,mt6795-disp-merge
+ - const: mediatek,mt8173-disp-merge
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml
index 29f9fa8f8219..831c653caffd 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml
@@ -24,6 +24,9 @@ properties:
- enum:
- mediatek,mt2712-disp-od
- mediatek,mt8173-disp-od
+ - items:
+ - const: mediatek,mt6795-disp-od
+ - const: mediatek,mt8173-disp-od
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml
index 92e320d54ba2..3e1069b00b56 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml
@@ -33,6 +33,10 @@ properties:
- const: mediatek,mt2701-disp-ovl
- items:
- enum:
+ - mediatek,mt6795-disp-ovl
+ - const: mediatek,mt8173-disp-ovl
+ - items:
+ - enum:
- mediatek,mt8188-disp-ovl
- mediatek,mt8195-disp-ovl
- const: mediatek,mt8183-disp-ovl
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml
index 42059efad45d..39dbb5c8bcf8 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml
@@ -39,6 +39,10 @@ properties:
- const: mediatek,mt2701-disp-rdma
- items:
- enum:
+ - mediatek,mt6795-disp-rdma
+ - const: mediatek,mt8173-disp-rdma
+ - items:
+ - enum:
- mediatek,mt8186-disp-rdma
- mediatek,mt8192-disp-rdma
- const: mediatek,mt8183-disp-rdma
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml
index 21a4e96ecd93..a8a5c9608598 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml
@@ -23,6 +23,9 @@ properties:
oneOf:
- enum:
- mediatek,mt8173-disp-split
+ - items:
+ - const: mediatek,mt6795-disp-split
+ - const: mediatek,mt8173-disp-split
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml
index 62fad23a26f5..39e3e2d4a0db 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml
@@ -24,6 +24,9 @@ properties:
oneOf:
- enum:
- mediatek,mt8173-disp-ufoe
+ - items:
+ - const: mediatek,mt6795-disp-ufoe
+ - const: mediatek,mt8173-disp-ufoe
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,wdma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,wdma.yaml
index 991183165d29..a3a2b71a4523 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,wdma.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,wdma.yaml
@@ -23,6 +23,9 @@ properties:
oneOf:
- enum:
- mediatek,mt8173-disp-wdma
+ - items:
+ - const: mediatek,mt6795-disp-wdma
+ - const: mediatek,mt8173-disp-wdma
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
index f0c2237d5f82..7a7cf3fb3e6d 100644
--- a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
@@ -29,6 +29,7 @@ properties:
- items:
- enum:
- qcom,sm8450-dp
+ - qcom,sm8550-dp
- const: qcom,sm8350-dp
reg:
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
index 130e16d025bc..01848bdd5873 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
@@ -15,6 +15,7 @@ properties:
- items:
- enum:
- qcom,apq8064-dsi-ctrl
+ - qcom,msm8226-dsi-ctrl
- qcom,msm8916-dsi-ctrl
- qcom,msm8953-dsi-ctrl
- qcom,msm8974-dsi-ctrl
@@ -26,6 +27,8 @@ properties:
- qcom,sdm660-dsi-ctrl
- qcom,sdm845-dsi-ctrl
- qcom,sm6115-dsi-ctrl
+ - qcom,sm6350-dsi-ctrl
+ - qcom,sm6375-dsi-ctrl
- qcom,sm8150-dsi-ctrl
- qcom,sm8250-dsi-ctrl
- qcom,sm8350-dsi-ctrl
@@ -256,6 +259,7 @@ allOf:
compatible:
contains:
enum:
+ - qcom,msm8226-dsi-ctrl
- qcom,msm8974-dsi-ctrl
then:
properties:
@@ -297,6 +301,7 @@ allOf:
contains:
enum:
- qcom,msm8998-dsi-ctrl
+ - qcom,sm6350-dsi-ctrl
then:
properties:
clocks:
@@ -364,6 +369,7 @@ allOf:
enum:
- qcom,sdm845-dsi-ctrl
- qcom,sm6115-dsi-ctrl
+ - qcom,sm6375-dsi-ctrl
then:
properties:
clocks:
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
index cf4a338c4661..62fb3e484eb2 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
@@ -15,10 +15,11 @@ allOf:
properties:
compatible:
enum:
+ - qcom,dsi-phy-28nm-8226
+ - qcom,dsi-phy-28nm-8960
- qcom,dsi-phy-28nm-hpm
- qcom,dsi-phy-28nm-hpm-fam-b
- qcom,dsi-phy-28nm-lp
- - qcom,dsi-phy-28nm-8960
reg:
items:
diff --git a/Documentation/devicetree/bindings/display/msm/gmu.yaml b/Documentation/devicetree/bindings/display/msm/gmu.yaml
index 029d72822d8b..d65926b4f054 100644
--- a/Documentation/devicetree/bindings/display/msm/gmu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/gmu.yaml
@@ -19,16 +19,18 @@ description: |
properties:
compatible:
- items:
- - pattern: '^qcom,adreno-gmu-6[0-9][0-9]\.[0-9]$'
- - const: qcom,adreno-gmu
+ oneOf:
+ - items:
+ - pattern: '^qcom,adreno-gmu-6[0-9][0-9]\.[0-9]$'
+ - const: qcom,adreno-gmu
+ - const: qcom,adreno-gmu-wrapper
reg:
- minItems: 3
+ minItems: 1
maxItems: 4
reg-names:
- minItems: 3
+ minItems: 1
maxItems: 4
clocks:
@@ -44,7 +46,6 @@ properties:
- description: GMU HFI interrupt
- description: GMU interrupt
-
interrupt-names:
items:
- const: hfi
@@ -72,14 +73,8 @@ required:
- compatible
- reg
- reg-names
- - clocks
- - clock-names
- - interrupts
- - interrupt-names
- power-domains
- power-domain-names
- - iommus
- - operating-points-v2
additionalProperties: false
@@ -122,6 +117,7 @@ allOf:
contains:
enum:
- qcom,adreno-gmu-635.0
+ - qcom,adreno-gmu-660.1
then:
properties:
reg:
@@ -217,6 +213,28 @@ allOf:
- const: axi
- const: memnoc
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: qcom,adreno-gmu-wrapper
+ then:
+ properties:
+ reg:
+ items:
+ - description: GMU wrapper register space
+ reg-names:
+ items:
+ - const: gmu
+ else:
+ required:
+ - clocks
+ - clock-names
+ - interrupts
+ - interrupt-names
+ - iommus
+ - operating-points-v2
+
examples:
- |
#include <dt-bindings/clock/qcom,gpucc-sdm845.h>
@@ -225,7 +243,7 @@ examples:
#include <dt-bindings/interrupt-controller/arm-gic.h>
gmu: gmu@506a000 {
- compatible="qcom,adreno-gmu-630.2", "qcom,adreno-gmu";
+ compatible = "qcom,adreno-gmu-630.2", "qcom,adreno-gmu";
reg = <0x506a000 0x30000>,
<0xb280000 0x10000>,
@@ -249,3 +267,12 @@ examples:
iommus = <&adreno_smmu 5>;
operating-points-v2 = <&gmu_opp_table>;
};
+
+ gmu_wrapper: gmu@596a000 {
+ compatible = "qcom,adreno-gmu-wrapper";
+ reg = <0x0596a000 0x30000>;
+ reg-names = "gmu";
+ power-domains = <&gpucc GPU_CX_GDSC>,
+ <&gpucc GPU_GX_GDSC>;
+ power-domain-names = "cx", "gx";
+ };
diff --git a/Documentation/devicetree/bindings/display/msm/gpu.yaml b/Documentation/devicetree/bindings/display/msm/gpu.yaml
index 5dabe7b6794b..58ca8912a8c3 100644
--- a/Documentation/devicetree/bindings/display/msm/gpu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/gpu.yaml
@@ -36,10 +36,7 @@ properties:
reg-names:
minItems: 1
- items:
- - const: kgsl_3d0_reg_memory
- - const: cx_mem
- - const: cx_dbgc
+ maxItems: 3
interrupts:
maxItems: 1
@@ -157,16 +154,62 @@ allOf:
required:
- clocks
- clock-names
+
- if:
properties:
compatible:
contains:
- pattern: '^qcom,adreno-6[0-9][0-9]\.[0-9]$'
-
- then: # Since Adreno 6xx series clocks should be defined in GMU
+ enum:
+ - qcom,adreno-610.0
+ - qcom,adreno-619.1
+ then:
properties:
- clocks: false
- clock-names: false
+ clocks:
+ minItems: 6
+ maxItems: 6
+
+ clock-names:
+ items:
+ - const: core
+ description: GPU Core clock
+ - const: iface
+ description: GPU Interface clock
+ - const: mem_iface
+ description: GPU Memory Interface clock
+ - const: alt_mem_iface
+ description: GPU Alternative Memory Interface clock
+ - const: gmu
+ description: CX GMU clock
+ - const: xo
+ description: GPUCC clocksource clock
+
+ reg-names:
+ minItems: 1
+ items:
+ - const: kgsl_3d0_reg_memory
+ - const: cx_dbgc
+
+ required:
+ - clocks
+ - clock-names
+ else:
+ if:
+ properties:
+ compatible:
+ contains:
+ pattern: '^qcom,adreno-6[0-9][0-9]\.[0-9]$'
+
+ then: # Starting with A6xx, the clocks are usually defined in the GMU node
+ properties:
+ clocks: false
+ clock-names: false
+
+ reg-names:
+ minItems: 1
+ items:
+ - const: kgsl_3d0_reg_memory
+ - const: cx_mem
+ - const: cx_dbgc
examples:
- |
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml b/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml
index a763cf8da122..2fe032d0e8f8 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml
@@ -22,6 +22,7 @@ properties:
- items:
- enum:
- qcom,apq8084-mdp5
+ - qcom,msm8226-mdp5
- qcom,msm8916-mdp5
- qcom,msm8917-mdp5
- qcom,msm8953-mdp5
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml
index b0100105e428..db9f07c6142d 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml
@@ -125,6 +125,7 @@ patternProperties:
- qcom,dsi-phy-14nm-660
- qcom,dsi-phy-14nm-8953
- qcom,dsi-phy-20nm
+ - qcom,dsi-phy-28nm-8226
- qcom,dsi-phy-28nm-hpm
- qcom,dsi-phy-28nm-lp
- qcom,hdmi-phy-8084
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml
index 1fb8321d9ee8..630b11480496 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml
@@ -13,7 +13,10 @@ $ref: /schemas/display/msm/dpu-common.yaml#
properties:
compatible:
- const: qcom,sc7180-dpu
+ enum:
+ - qcom,sc7180-dpu
+ - qcom,sm6350-dpu
+ - qcom,sm6375-dpu
reg:
items:
@@ -26,6 +29,7 @@ properties:
- const: vbif
clocks:
+ minItems: 6
items:
- description: Display hf axi clock
- description: Display ahb clock
@@ -33,8 +37,10 @@ properties:
- description: Display lut clock
- description: Display core clock
- description: Display vsync clock
+ - description: Display core throttle clock
clock-names:
+ minItems: 6
items:
- const: bus
- const: iface
@@ -42,6 +48,7 @@ properties:
- const: lut
- const: core
- const: vsync
+ - const: throttle
required:
- compatible
@@ -52,6 +59,20 @@ required:
unevaluatedProperties: false
+allOf:
+ - if:
+ properties:
+ compatible:
+ const: qcom,sm6375-dpu
+
+ then:
+ properties:
+ clocks:
+ minItems: 7
+
+ clock-names:
+ minItems: 7
+
examples:
- |
#include <dt-bindings/clock/qcom,dispcc-sc7180.h>
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml
new file mode 100644
index 000000000000..ed0ad194d4ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml
@@ -0,0 +1,213 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm6350-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM6350 Display MDSS
+
+maintainers:
+ - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+description:
+ SM6350 MSM Mobile Display Subsystem (MDSS), which encapsulates sub-blocks
+ like DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sm6350-mdss
+
+ clocks:
+ items:
+ - description: Display AHB clock from gcc
+ - description: Display AXI clock from gcc
+ - description: Display core clock
+
+ clock-names:
+ items:
+ - const: iface
+ - const: bus
+ - const: core
+
+ iommus:
+ maxItems: 1
+
+ interconnects:
+ maxItems: 2
+
+ interconnect-names:
+ maxItems: 2
+
+patternProperties:
+ "^display-controller@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,sm6350-dpu
+
+ "^dsi@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ items:
+ - const: qcom,sm6350-dsi-ctrl
+ - const: qcom,mdss-dsi-ctrl
+
+ "^phy@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,dsi-phy-10nm
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,dispcc-sm6350.h>
+ #include <dt-bindings/clock/qcom,gcc-sm6350.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-subsystem@ae00000 {
+ compatible = "qcom,sm6350-mdss";
+ reg = <0x0ae00000 0x1000>;
+ reg-names = "mdss";
+
+ power-domains = <&dispcc MDSS_GDSC>;
+
+ clocks = <&gcc GCC_DISP_AHB_CLK>,
+ <&gcc GCC_DISP_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>;
+ clock-names = "iface", "bus", "core";
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ iommus = <&apps_smmu 0x800 0x2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ display-controller@ae01000 {
+ compatible = "qcom,sm6350-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_ROT_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus", "iface", "rot", "lut", "core",
+ "vsync";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
+ <&dispcc DISP_CC_MDSS_ROT_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>;
+ assigned-clock-rates = <300000000>,
+ <19200000>,
+ <19200000>,
+ <19200000>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmhpd SM6350_CX>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dpu_intf2_out: endpoint {
+ remote-endpoint = <&dsi1_in>;
+ };
+ };
+ };
+ };
+
+ dsi@ae94000 {
+ compatible = "qcom,sm6350-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+ reg = <0x0ae94000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd SM6350_MX>;
+
+ phys = <&dsi0_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ };
+ };
+ };
+ };
+
+ dsi0_phy: phy@ae94400 {
+ compatible = "qcom,dsi-phy-10nm";
+ reg = <0x0ae94400 0x200>,
+ <0x0ae94600 0x280>,
+ <0x0ae94a00 0x1e0>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml
new file mode 100644
index 000000000000..76369a4f7c4d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml
@@ -0,0 +1,215 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm6375-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM6375 Display MDSS
+
+maintainers:
+ - Konrad Dybcio <konrad.dybcio@linaro.org>
+
+description:
+ SM6375 MSM Mobile Display Subsystem (MDSS), which encapsulates sub-blocks
+ like DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sm6375-mdss
+
+ clocks:
+ items:
+ - description: Display AHB clock from gcc
+ - description: Display AHB clock
+ - description: Display core clock
+
+ clock-names:
+ items:
+ - const: iface
+ - const: ahb
+ - const: core
+
+ iommus:
+ maxItems: 1
+
+ interconnects:
+ maxItems: 2
+
+ interconnect-names:
+ maxItems: 2
+
+patternProperties:
+ "^display-controller@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,sm6375-dpu
+
+ "^dsi@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ items:
+ - const: qcom,sm6375-dsi-ctrl
+ - const: qcom,mdss-dsi-ctrl
+
+ "^phy@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,sm6375-dsi-phy-7nm
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,rpmcc.h>
+ #include <dt-bindings/clock/qcom,sm6375-gcc.h>
+ #include <dt-bindings/clock/qcom,sm6375-dispcc.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-subsystem@5e00000 {
+ compatible = "qcom,sm6375-mdss";
+ reg = <0x05e00000 0x1000>;
+ reg-names = "mdss";
+
+ power-domains = <&dispcc MDSS_GDSC>;
+
+ clocks = <&gcc GCC_DISP_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>;
+ clock-names = "iface", "ahb", "core";
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ iommus = <&apps_smmu 0x820 0x2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ display-controller@5e01000 {
+ compatible = "qcom,sm6375-dpu";
+ reg = <0x05e01000 0x8e030>,
+ <0x05eb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_ROT_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
+ <&gcc GCC_DISP_THROTTLE_CORE_CLK>;
+ clock-names = "bus",
+ "iface",
+ "rot",
+ "lut",
+ "core",
+ "vsync",
+ "throttle";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmpd SM6375_VDDCX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dpu_intf2_out: endpoint {
+ remote-endpoint = <&dsi1_in>;
+ };
+ };
+ };
+ };
+
+ dsi@5e94000 {
+ compatible = "qcom,sm6375-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+ reg = <0x05e94000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmpd SM6375_VDDMX>;
+
+ phys = <&mdss_dsi0_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ };
+ };
+ };
+ };
+
+ mdss_dsi0_phy: phy@5e94400 {
+ compatible = "qcom,sm6375-dsi-phy-7nm";
+ reg = <0x05e94400 0x200>,
+ <0x05e94600 0x280>,
+ <0x05e94900 0x264>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmcc RPM_SMD_XO_CLK_SRC>;
+ clock-names = "iface", "ref";
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml
index 4d94dbff3054..79a226e4cc6a 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml
@@ -64,7 +64,7 @@ patternProperties:
type: object
properties:
compatible:
- const: qcom,dsi-phy-5nm-8350
+ const: qcom,sm8350-dsi-phy-5nm
unevaluatedProperties: false
diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
index aed55608ebf6..906ef62709b8 100644
--- a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
+++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
@@ -32,6 +32,10 @@ properties:
- innolux,hj110iz-01a
# STARRY 2081101QFH032011-53G 10.1" WUXGA TFT LCD panel
- starry,2081101qfh032011-53g
+ # STARRY himax83102-j02 10.51" WUXGA TFT LCD panel
+ - starry,himax83102-j02
+ # STARRY ili9882t 10.51" WUXGA TFT LCD panel
+ - starry,ili9882t
reg:
description: the virtual channel number of a DSI peripheral
diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml
index 0039561ef04c..5f7e4c486094 100644
--- a/Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml
+++ b/Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml
@@ -19,11 +19,16 @@ allOf:
properties:
compatible:
- items:
- - enum:
- - xiaomi,elish-boe-nt36523
- - xiaomi,elish-csot-nt36523
- - const: novatek,nt36523
+ oneOf:
+ - items:
+ - enum:
+ - xiaomi,elish-boe-nt36523
+ - xiaomi,elish-csot-nt36523
+ - const: novatek,nt36523
+ - items:
+ - enum:
+ - lenovo,j606f-boe-nt36523w
+ - const: novatek,nt36523w
reset-gpios:
maxItems: 1
@@ -34,6 +39,7 @@ properties:
reg: true
ports: true
+ rotation: true
backlight: true
required:
diff --git a/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml b/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml
index 9b701df5e9d2..2f0238b770eb 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml
@@ -67,6 +67,7 @@ properties:
items:
- enum:
- sainsmart18
+ - shineworld,lh133k
- const: panel-mipi-dbi-spi
write-only:
@@ -86,6 +87,8 @@ properties:
Logic level supply for interface signals (Vddi).
No need to set if this is the same as power-supply.
+ spi-3wire: true
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
index 01560fe226dd..1d4936fc5182 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
@@ -33,6 +33,8 @@ properties:
- ampire,am-1280800n3tzqw-t00h
# Ampire AM-480272H3TMQW-T01H 4.3" WQVGA TFT LCD panel
- ampire,am-480272h3tmqw-t01h
+ # Ampire AM-800480L1TMQW-T00H 5" WVGA TFT LCD panel
+ - ampire,am-800480l1tmqw-t00h
# Ampire AM-800480R3TMQW-A1H 7.0" WVGA TFT LCD panel
- ampire,am800480r3tmqwa1h
# Ampire AM-800600P5TMQW-TB8H 8.0" SVGA TFT LCD panel
@@ -77,6 +79,8 @@ properties:
- auo,t215hvn01
# Shanghai AVIC Optoelectronics 7" 1024x600 color TFT-LCD panel
- avic,tm070ddh03
+ # BOE EV121WXM-N10-1850 12.1" WXGA (1280x800) TFT LCD panel
+ - boe,ev121wxm-n10-1850
# BOE HV070WSA-100 7.01" WSVGA TFT LCD panel
- boe,hv070wsa-100
# BOE OPTOELECTRONICS TECHNOLOGY 10.1" WXGA TFT LCD panel
@@ -174,6 +178,8 @@ properties:
- innolux,at043tn24
# Innolux AT070TN92 7.0" WQVGA TFT LCD panel
- innolux,at070tn92
+ # Innolux G070ACE-L01 7" WVGA (800x480) TFT LCD panel
+ - innolux,g070ace-l01
# Innolux G070Y2-L01 7" WVGA (800x480) TFT LCD panel
- innolux,g070y2-l01
# Innolux G070Y2-T02 7" WVGA (800x480) TFT LCD TTL panel
@@ -280,6 +286,8 @@ properties:
- rocktech,rk101ii01d-ct
# Rocktech Display Ltd. RK070ER9427 800(RGB)x480 TFT LCD panel
- rocktech,rk070er9427
+ # Rocktech Display Ltd. RK043FN48H 4.3" 480x272 LCD-TFT panel
+ - rocktech,rk043fn48h
# Samsung 13.3" FHD (1920x1080 pixels) eDP AMOLED panel
- samsung,atna33xc20
# Samsung 12.2" (2560x1600 pixels) TFT LCD panel
diff --git a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml
index 09b5eb7542f8..150e81090af2 100644
--- a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml
+++ b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml
@@ -20,6 +20,8 @@ allOf:
properties:
compatible:
enum:
+ # Anberic RG353V-V2 5.0" 640x480 TFT LCD panel
+ - anbernic,rg353v-panel-v2
# Rocktech JH057N00900 5.5" 720x1440 TFT LCD panel
- rocktech,jh057n00900
# Xingbangda XBD599 5.99" 720x1440 TFT LCD panel
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml
new file mode 100644
index 000000000000..45a236d2cc70
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,s6d7aa0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S6D7AA0 MIPI-DSI LCD panel controller
+
+maintainers:
+ - Artur Weber <aweber.kernel@gmail.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ # 1280x800 LSL080AL02 panel
+ - samsung,lsl080al02
+ # 1024x768 LSL080AL03 panel
+ - samsung,lsl080al03
+ # 1024x768 LTL101AT01 panel
+ - samsung,ltl101at01
+ - const: samsung,s6d7aa0
+
+ reg: true
+
+ backlight:
+ description:
+ Backlight to use for the panel. If this property is set on panels
+ that have DSI-based backlight control (LSL080AL03 and LTL101AT01),
+ it overrides the DSI-based backlight.
+
+ reset-gpios:
+ description: Reset GPIO pin, usually GPIO_ACTIVE_LOW.
+
+ power-supply:
+ description:
+ Main power supply for the panel; the exact voltage differs between
+ panels, and is usually somewhere around 3.3-5v.
+
+ vmipi-supply:
+ description: VMIPI supply, usually 1.8v.
+
+required:
+ - compatible
+ - reg
+ - reset-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "samsung,lsl080al02", "samsung,s6d7aa0";
+ reg = <0>;
+ power-supply = <&display_3v3_supply>;
+ reset-gpios = <&gpf0 4 GPIO_ACTIVE_LOW>;
+ backlight = <&backlight>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml
index 1cdc91b3439f..200fbf1c74a0 100644
--- a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml
@@ -74,7 +74,7 @@ examples:
vdd3-supply = <&vcclcd_reg>;
vci-supply = <&vlcd_reg>;
reset-gpios = <&gpy4 5 0>;
- power-on-delay= <50>;
+ power-on-delay = <50>;
reset-delay = <100>;
init-delay = <100>;
panel-width-mm = <58>;
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
index 6f43d885c9b3..df61cb5f5c54 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
@@ -121,11 +121,11 @@ examples:
#size-cells = <0>;
vopb_out_edp: endpoint@0 {
reg = <0>;
- remote-endpoint=<&edp_in_vopb>;
+ remote-endpoint = <&edp_in_vopb>;
};
vopb_out_hdmi: endpoint@1 {
reg = <1>;
- remote-endpoint=<&hdmi_in_vopb>;
+ remote-endpoint = <&hdmi_in_vopb>;
};
};
};
diff --git a/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml
index c488308d7be1..53560052aaf0 100644
--- a/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml
+++ b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml
@@ -74,8 +74,6 @@ properties:
- const: 2
required:
- - "#address-cells"
- - "#size-cells"
- compatible
- reg
- clocks
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vi.yaml
index a42bf33d1e7d..2181855a0920 100644
--- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vi.yaml
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vi.yaml
@@ -73,6 +73,18 @@ properties:
avdd-dsi-csi-supply:
description: DSI/CSI power supply. Must supply 1.2 V.
+ vip:
+ $ref: /schemas/display/tegra/nvidia,tegra20-vip.yaml
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Input from the VIP (parallel input capture) module
+
patternProperties:
"^csi@[0-9a-f]+$":
type: object
@@ -108,6 +120,22 @@ examples:
#include <dt-bindings/clock/tegra20-car.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ camera@48 {
+ compatible = "aptina,mt9v111";
+ reg = <0x48>;
+ clocks = <&camera_clk>;
+
+ port {
+ mt9v111_out: endpoint {
+ remote-endpoint = <&vi_vip_in>;
+ };
+ };
+ };
+ };
+
vi@54080000 {
compatible = "nvidia,tegra20-vi";
reg = <0x54080000 0x00040000>;
@@ -115,6 +143,37 @@ examples:
clocks = <&tegra_car TEGRA20_CLK_VI>;
resets = <&tegra_car 100>;
reset-names = "vi";
+
+ vip {
+ compatible = "nvidia,tegra20-vip";
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ vi_vip_in: endpoint {
+ remote-endpoint = <&mt9v111_out>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ vi_vip_out: endpoint {
+ remote-endpoint = <&vi_in>;
+ };
+ };
+ };
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ vi_in: endpoint {
+ remote-endpoint = <&vi_vip_out>;
+ };
+ };
+ };
};
- |
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vip.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vip.yaml
new file mode 100644
index 000000000000..14294edb8d8c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vip.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-vip.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra VIP (parallel video capture) controller
+
+maintainers:
+ - Luca Ceresoli <luca.ceresoli@bootlin.com>
+
+properties:
+ compatible:
+ enum:
+ - nvidia,tegra20-vip
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Port receiving the video stream from the sensor
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Port sending the video stream to the VI
+
+ required:
+ - port@0
+ - port@1
+
+unevaluatedProperties: false
+
+required:
+ - compatible
+ - ports
+
+# see nvidia,tegra20-vi.yaml for an example
diff --git a/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml b/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml
index 64845347f44d..1e5752b19a49 100644
--- a/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml
+++ b/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml
@@ -112,14 +112,23 @@ properties:
- const: stericsson,dma40
reg:
- items:
- - description: DMA40 memory base
- - description: LCPA memory base
+ oneOf:
+ - items:
+ - description: DMA40 memory base
+ - items:
+ - description: DMA40 memory base
+ - description: LCPA memory base, deprecated, use eSRAM pool instead
+ deprecated: true
+
reg-names:
- items:
- - const: base
- - const: lcpa
+ oneOf:
+ - items:
+ - const: base
+ - items:
+ - const: base
+ - const: lcpa
+ deprecated: true
interrupts:
maxItems: 1
@@ -127,6 +136,15 @@ properties:
clocks:
maxItems: 1
+ sram:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: A phandle array with inner size 1 (no arg cells).
+ First phandle is the LCPA (Logical Channel Parameter Address) memory.
+ Second phandle is the LCLA (Logical Channel Link base Address) memory.
+ maxItems: 2
+ items:
+ maxItems: 1
+
memcpy-channels:
$ref: /schemas/types.yaml#/definitions/uint32-array
description: Array of u32 elements indicating which channels on the DMA
@@ -138,6 +156,7 @@ required:
- reg
- interrupts
- clocks
+ - sram
- memcpy-channels
additionalProperties: false
@@ -149,8 +168,9 @@ examples:
#include <dt-bindings/mfd/dbx500-prcmu.h>
dma-controller@801c0000 {
compatible = "stericsson,db8500-dma40", "stericsson,dma40";
- reg = <0x801c0000 0x1000>, <0x40010000 0x800>;
- reg-names = "base", "lcpa";
+ reg = <0x801c0000 0x1000>;
+ reg-names = "base";
+ sram = <&lcpa>, <&lcla>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <3>;
memcpy-channels = <56 57 58 59 60>;
diff --git a/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml
index beecfe7a1732..4ca300a42a99 100644
--- a/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml
+++ b/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml
@@ -33,6 +33,7 @@ properties:
enum:
- ti,am62a-dmss-bcdma-csirx
- ti,am64-dmss-bcdma
+ - ti,j721s2-dmss-bcdma-csi
reg:
minItems: 3
@@ -151,7 +152,12 @@ allOf:
required:
- power-domains
- else:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: ti,am64-dmss-bcdma
+ then:
properties:
reg:
minItems: 5
@@ -168,6 +174,28 @@ allOf:
- ti,sci-rm-range-bchan
- ti,sci-rm-range-tchan
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: ti,j721s2-dmss-bcdma-csi
+ then:
+ properties:
+ ti,sci-rm-range-bchan: false
+
+ reg:
+ maxItems: 4
+
+ reg-names:
+ items:
+ - const: gcfg
+ - const: rchanrt
+ - const: tchanrt
+ - const: ringrt
+
+ required:
+ - ti,sci-rm-range-tchan
+
unevaluatedProperties: false
examples:
diff --git a/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml b/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml
index d6cbd95ec26d..2128f4645c98 100644
--- a/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml
+++ b/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml
@@ -41,6 +41,9 @@ properties:
clock-names:
const: axi_clk
+ power-domains:
+ maxItems: 1
+
required:
- "#dma-cells"
- compatible
@@ -48,12 +51,14 @@ required:
- interrupts
- clocks
- clock-names
+ - power-domains
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/xlnx-zynqmp-power.h>
dma: dma-controller@fd4c0000 {
compatible = "xlnx,zynqmp-dpdma";
@@ -63,6 +68,7 @@ examples:
clocks = <&dpdma_clk>;
clock-names = "axi_clk";
#dma-cells = <1>;
+ power-domains = <&zynqmp_firmware PD_DP>;
};
...
diff --git a/Documentation/devicetree/bindings/dvfs/performance-domain.yaml b/Documentation/devicetree/bindings/dvfs/performance-domain.yaml
index 1dcb85a02a76..cc930660b794 100644
--- a/Documentation/devicetree/bindings/dvfs/performance-domain.yaml
+++ b/Documentation/devicetree/bindings/dvfs/performance-domain.yaml
@@ -42,7 +42,7 @@ properties:
enum: [ 0, 1 ]
performance-domains:
- $ref: '/schemas/types.yaml#/definitions/phandle-array'
+ $ref: /schemas/types.yaml#/definitions/phandle-array
description:
A phandle and performance domain specifier as defined by bindings of the
performance controller/provider specified by phandle.
diff --git a/Documentation/devicetree/bindings/eeprom/at25.yaml b/Documentation/devicetree/bindings/eeprom/at25.yaml
index 11e2a95a7bcb..0e31bb36ebb1 100644
--- a/Documentation/devicetree/bindings/eeprom/at25.yaml
+++ b/Documentation/devicetree/bindings/eeprom/at25.yaml
@@ -33,6 +33,7 @@ properties:
- microchip,25lc040
- st,m95m02
- st,m95256
+ - st,m95640
- cypress,fm25
- const: atmel,at25
diff --git a/Documentation/devicetree/bindings/example-schema.yaml b/Documentation/devicetree/bindings/example-schema.yaml
index f4eec4c42fb3..a41f9b9a196b 100644
--- a/Documentation/devicetree/bindings/example-schema.yaml
+++ b/Documentation/devicetree/bindings/example-schema.yaml
@@ -52,8 +52,7 @@ properties:
- vendor,soc4-ip
- vendor,soc3-ip
- vendor,soc2-ip
- - enum:
- - vendor,soc1-ip
+ - const: vendor,soc1-ip
# additionalItems being false is implied
# minItems/maxItems equal to 2 is implied
- items:
@@ -85,6 +84,9 @@ properties:
discouraged.
clock-names:
+ # For single-entry lists in clocks, resets etc., the xxx-names often do not
+ # bring any value, especially if they copy the IP block name. In such case
+ # just skip the xxx-names.
items:
- const: bus
diff --git a/Documentation/devicetree/bindings/extcon/maxim,max77843.yaml b/Documentation/devicetree/bindings/extcon/maxim,max77843.yaml
index 128960545640..55800fb0221d 100644
--- a/Documentation/devicetree/bindings/extcon/maxim,max77843.yaml
+++ b/Documentation/devicetree/bindings/extcon/maxim,max77843.yaml
@@ -23,6 +23,7 @@ properties:
connector:
$ref: /schemas/connector/usb-connector.yaml#
+ unevaluatedProperties: false
ports:
$ref: /schemas/graph.yaml#/properties/ports
diff --git a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml
index 6a9c96f0352a..2c8cf6aab19a 100644
--- a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml
+++ b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml
@@ -27,10 +27,14 @@ properties:
interrupt-names:
minItems: 1
- items:
- - const: usb_id
- - const: usb_vbus
-
+ anyOf:
+ - items:
+ - const: usb_id
+ - const: usb_vbus
+ - items:
+ - const: usb_id
+ - items:
+ - const: usb_vbus
required:
- compatible
- reg
@@ -49,7 +53,7 @@ examples:
interrupt-controller;
#interrupt-cells = <4>;
- usb_id: misc@900 {
+ usb_id: usb-detect@900 {
compatible = "qcom,pm8941-misc";
reg = <0x900>;
interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>;
diff --git a/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml b/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml
index efdf59abb2e1..351b202d0e10 100644
--- a/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml
+++ b/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml
@@ -23,7 +23,7 @@ properties:
headphone detect mode to HPDETL, ARIZONA_ACCDET_MODE_HPR/2 sets it
to HPDETR. If this node is not included or if the value is unknown,
then headphone detection mode is set to HPDETL.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 1
maximum: 2
@@ -51,7 +51,7 @@ properties:
description:
Additional software microphone detection debounce specified in
milliseconds.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
wlf,micd-pol-gpio:
description:
@@ -63,7 +63,7 @@ properties:
description:
Time allowed for MICBIAS to startup prior to performing microphone
detection, specified as per the ARIZONA_MICD_TIME_XXX defines.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 12
@@ -71,7 +71,7 @@ properties:
description:
Delay between successive microphone detection measurements, specified
as per the ARIZONA_MICD_TIME_XXX defines.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 12
@@ -79,7 +79,7 @@ properties:
description:
Microphone detection hardware debounces specified as the number of
measurements to take.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
enum: [2, 4]
wlf,micd-timeout-ms:
@@ -97,7 +97,7 @@ properties:
CTIA / OMTP headsets), the field can be of variable length but
should always be a multiple of 3 cells long, each three cell group
represents one polarity configuration.
- $ref: "/schemas/types.yaml#/definitions/uint32-matrix"
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
items:
items:
- description:
@@ -119,7 +119,7 @@ properties:
description:
Settings for the general purpose switch, set as one of the
ARIZONA_GPSW_XXX defines.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 3
diff --git a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
index 5824c43e9893..b138f3d23df8 100644
--- a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
+++ b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
@@ -34,6 +34,10 @@ properties:
- description: SCMI compliant firmware with ARM SMC/HVC transport
items:
- const: arm,scmi-smc
+ - description: SCMI compliant firmware with ARM SMC/HVC transport
+ with shmem address(4KB-page, offset) as parameters
+ items:
+ - const: arm,scmi-smc-param
- description: SCMI compliant firmware with SCMI Virtio transport.
The virtio transport only supports a single device.
items:
@@ -214,7 +218,7 @@ properties:
patternProperties:
'^regulator@[0-9a-f]+$':
type: object
- $ref: "../regulator/regulator.yaml#"
+ $ref: /schemas/regulator/regulator.yaml#
unevaluatedProperties: false
properties:
@@ -299,7 +303,9 @@ else:
properties:
compatible:
contains:
- const: arm,scmi-smc
+ enum:
+ - arm,scmi-smc
+ - arm,scmi-smc-param
then:
required:
- arm,smc-id
diff --git a/Documentation/devicetree/bindings/firmware/brcm,kona-smc.yaml b/Documentation/devicetree/bindings/firmware/brcm,kona-smc.yaml
new file mode 100644
index 000000000000..684b15ba9ad0
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/brcm,kona-smc.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/brcm,kona-smc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Kona family Secure Monitor bounce buffer
+
+description:
+ A bounce buffer used for non-secure to secure communications.
+
+maintainers:
+ - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - brcm,bcm11351-smc
+ - brcm,bcm21664-smc
+ - brcm,bcm23550-smc
+ - const: brcm,kona-smc
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ smc@3404c000 {
+ compatible = "brcm,bcm11351-smc", "brcm,kona-smc";
+ reg = <0x3404c000 0x400>; /* 1 KiB in SRAM */
+ };
+...
diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
index 83381f3a1341..bdbee58a542b 100644
--- a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
+++ b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
@@ -51,6 +51,7 @@ properties:
- qcom,scm-sdm845
- qcom,scm-sdx55
- qcom,scm-sdx65
+ - qcom,scm-sdx75
- qcom,scm-sm6115
- qcom,scm-sm6125
- qcom,scm-sm6350
diff --git a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml
index f14f7b454f07..910bebe6cfa8 100644
--- a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml
+++ b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Xilinx firmware driver
maintainers:
- - Nava kishore Manne <nava.manne@xilinx.com>
+ - Nava kishore Manne <nava.kishore.manne@amd.com>
description: The zynqmp-firmware node describes the interface to platform
firmware. ZynqMP has an interface to communicate with secure firmware.
diff --git a/Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.yaml b/Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.yaml
index f47b6140a742..04dcadc2c20e 100644
--- a/Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.yaml
+++ b/Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Xilinx Zynq FPGA Manager
maintainers:
- - Michal Simek <michal.simek@xilinx.com>
+ - Michal Simek <michal.simek@amd.com>
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/fpga/xlnx,versal-fpga.yaml b/Documentation/devicetree/bindings/fpga/xlnx,versal-fpga.yaml
index ac6a207278d5..26f18834caa3 100644
--- a/Documentation/devicetree/bindings/fpga/xlnx,versal-fpga.yaml
+++ b/Documentation/devicetree/bindings/fpga/xlnx,versal-fpga.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Xilinx Versal FPGA driver.
maintainers:
- - Nava kishore Manne <nava.manne@xilinx.com>
+ - Nava kishore Manne <nava.kishore.manne@amd.com>
description: |
Device Tree Versal FPGA bindings for the Versal SoC, controlled
diff --git a/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.yaml b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.yaml
index 00a8d92ff736..1390ae103b0b 100644
--- a/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.yaml
+++ b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Xilinx Zynq Ultrascale MPSoC FPGA Manager
maintainers:
- - Nava kishore Manne <navam@xilinx.com>
+ - Nava kishore Manne <nava.kishore.manne@amd.com>
description: |
Device Tree Bindings for Zynq Ultrascale MPSoC FPGA Manager.
diff --git a/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml
index 4d69f79df859..62fcc2bd5d80 100644
--- a/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml
@@ -1,10 +1,10 @@
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
-$id: http://devicetree.org/schemas/gpio/brcm,bcm6345-gpio.yaml#
+$id: http://devicetree.org/schemas/gpio/brcm,bcm63xx-gpio.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Broadcom BCM6345 GPIO controller
+title: Broadcom BCM63xx GPIO controller
maintainers:
- Álvaro Fernández Rojas <noltari@gmail.com>
@@ -18,8 +18,6 @@ description: |+
BCM6338 have 8-bit data and dirout registers, where GPIO state can be read
and/or written, and the direction changed from input to output.
- BCM6345 have 16-bit data and dirout registers, where GPIO state can be read
- and/or written, and the direction changed from input to output.
BCM6318, BCM6328, BCM6358, BCM6362, BCM6368 and BCM63268 have 32-bit data
and dirout registers, where GPIO state can be read and/or written, and the
direction changed from input to output.
@@ -29,7 +27,6 @@ properties:
enum:
- brcm,bcm6318-gpio
- brcm,bcm6328-gpio
- - brcm,bcm6345-gpio
- brcm,bcm6358-gpio
- brcm,bcm6362-gpio
- brcm,bcm6368-gpio
@@ -64,17 +61,6 @@ additionalProperties: false
examples:
- |
- gpio@fffe0406 {
- compatible = "brcm,bcm6345-gpio";
- reg-names = "dirout", "dat";
- reg = <0xfffe0406 2>, <0xfffe040a 2>;
- native-endian;
-
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- - |
gpio@0 {
compatible = "brcm,bcm63268-gpio";
reg-names = "dirout", "dat";
diff --git a/Documentation/devicetree/bindings/gpio/gpio-delay.yaml b/Documentation/devicetree/bindings/gpio/gpio-delay.yaml
new file mode 100644
index 000000000000..1cebc4058e27
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-delay.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-delay.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO delay controller
+
+maintainers:
+ - Alexander Stein <linux@ew.tq-group.com>
+
+description: |
+ This binding describes an electrical setup where setting an GPIO output
+ is delayed by some external setup, e.g. RC circuit.
+
+ +----------+ +-----------+
+ | | VCC_B | |
+ | | | | |
+ | | VCC_A _ | |
+ | GPIO | | | R | Consumer |
+ |controller| ___ |_| | |
+ | | | | | | |
+ | [IOx|-------| |--+-----|-----+ |
+ | | |___| | | input |
+ | | | | |
+ +----------+ --- C +-----------+
+ ---
+ |
+ -
+ GND
+
+ If the input on the consumer is controlled by an open-drain signal
+ attached to an RC circuit the ramp-up delay is not under control
+ of the GPIO controller.
+
+properties:
+ compatible:
+ const: gpio-delay
+
+ "#gpio-cells":
+ description: |
+ Specifies the pin, ramp-up and ramp-down delays. The
+ delays are specified in microseconds.
+ const: 3
+
+ gpios:
+ description: Array of GPIOs which output signal change is delayed
+ minItems: 1
+ maxItems: 32
+
+ gpio-controller: true
+
+ gpio-line-names:
+ minItems: 1
+ maxItems: 32
+
+required:
+ - compatible
+ - "#gpio-cells"
+ - gpio-controller
+ - gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ enable_delay: enable-delay {
+ compatible = "gpio-delay";
+ #gpio-cells = <3>;
+ gpio-controller;
+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>,
+ <&gpio3 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ consumer {
+ enable-gpios = <&enable_delay 0 130000 30000>;
+ };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-ep9301.yaml b/Documentation/devicetree/bindings/gpio/gpio-ep9301.yaml
new file mode 100644
index 000000000000..daadfb4926c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-ep9301.yaml
@@ -0,0 +1,154 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-ep9301.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: EP93xx GPIO controller
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+ - Bartosz Golaszewski <brgl@bgdev.pl>
+ - Nikita Shubin <nikita.shubin@maquefel.me>
+
+properties:
+ compatible:
+ oneOf:
+ - const: cirrus,ep9301-gpio
+ - items:
+ - enum:
+ - cirrus,ep9302-gpio
+ - cirrus,ep9307-gpio
+ - cirrus,ep9312-gpio
+ - cirrus,ep9315-gpio
+ - const: cirrus,ep9301-gpio
+
+ reg:
+ minItems: 2
+ items:
+ - description: data register
+ - description: direction register
+ - description: interrupt registers base
+
+ reg-names:
+ minItems: 2
+ items:
+ - const: data
+ - const: dir
+ - const: intr
+
+ gpio-controller: true
+
+ gpio-ranges: true
+
+ "#gpio-cells":
+ const: 2
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 2
+
+ interrupts:
+ oneOf:
+ - maxItems: 1
+ - description: port F has dedicated irq line for each gpio line
+ maxItems: 8
+
+required:
+ - compatible
+ - reg
+ - gpio-controller
+ - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ gpio@80840000 {
+ compatible = "cirrus,ep9301-gpio";
+ reg = <0x80840000 0x04>,
+ <0x80840010 0x04>,
+ <0x80840090 0x1c>;
+ reg-names = "data", "dir", "intr";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ interrupt-parent = <&vic1>;
+ interrupts = <27>;
+ };
+
+ gpio@80840004 {
+ compatible = "cirrus,ep9301-gpio";
+ reg = <0x80840004 0x04>,
+ <0x80840014 0x04>,
+ <0x808400ac 0x1c>;
+ reg-names = "data", "dir", "intr";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ interrupt-parent = <&vic1>;
+ interrupts = <27>;
+ };
+
+ gpio@80840008 {
+ compatible = "cirrus,ep9301-gpio";
+ reg = <0x80840008 0x04>,
+ <0x80840018 0x04>;
+ reg-names = "data", "dir";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@8084000c {
+ compatible = "cirrus,ep9301-gpio";
+ reg = <0x8084000c 0x04>,
+ <0x8084001c 0x04>;
+ reg-names = "data", "dir";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@80840020 {
+ compatible = "cirrus,ep9301-gpio";
+ reg = <0x80840020 0x04>,
+ <0x80840024 0x04>;
+ reg-names = "data", "dir";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@80840030 {
+ compatible = "cirrus,ep9301-gpio";
+ reg = <0x80840030 0x04>,
+ <0x80840034 0x04>,
+ <0x8084004c 0x1c>;
+ reg-names = "data", "dir", "intr";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ interrupts-extended = <&vic0 19>, <&vic0 20>,
+ <&vic0 21>, <&vic0 22>,
+ <&vic1 15>, <&vic1 16>,
+ <&vic1 17>, <&vic1 18>;
+ };
+
+ gpio@80840038 {
+ compatible = "cirrus,ep9301-gpio";
+ reg = <0x80840038 0x04>,
+ <0x8084003c 0x04>;
+ reg-names = "data", "dir";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@80840040 {
+ compatible = "cirrus,ep9301-gpio";
+ reg = <0x80840040 0x04>,
+ <0x80840044 0x04>;
+ reg-names = "data", "dir";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/gpio/gpio-mmio.yaml b/Documentation/devicetree/bindings/gpio/gpio-mmio.yaml
new file mode 100644
index 000000000000..b394e058256e
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-mmio.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-mmio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic MMIO GPIO
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+ - Bartosz Golaszewski <brgl@bgdev.pl>
+
+description:
+ Some simple GPIO controllers may consist of a single data register or a pair
+ of set/clear-bit registers. Such controllers are common for glue logic in
+ FPGAs or ASICs. Commonly, these controllers are accessed over memory-mapped
+ NAND-style parallel busses.
+
+properties:
+ compatible:
+ enum:
+ - brcm,bcm6345-gpio
+ - ni,169445-nand-gpio
+ - wd,mbl-gpio # Western Digital MyBook Live memory-mapped GPIO controller
+
+ big-endian: true
+
+ '#gpio-cells':
+ const: 2
+
+ gpio-controller: true
+
+ little-endian: true
+
+ reg:
+ minItems: 1
+ description:
+ A list of registers in the controller. The width of each register is
+ determined by its size. All registers must have the same width. The number
+ of GPIOs is set by the width, with bit 0 corresponding to GPIO 0.
+ items:
+ - description:
+ Register to READ the value of the GPIO lines. If GPIO line is high,
+ the bit will be set. If the GPIO line is low, the bit will be cleared.
+ This register may also be used to drive GPIOs if the SET register is
+ omitted.
+ - description:
+ Register to SET the value of the GPIO lines. Setting a bit in this
+ register will drive the GPIO line high.
+ - description:
+ Register to CLEAR the value of the GPIO lines. Setting a bit in this
+ register will drive the GPIO line low. If this register is omitted,
+ the SET register will be used to clear the GPIO lines as well, by
+ actively writing the line with 0.
+ - description:
+ Register to set the line as OUTPUT. Setting a bit in this register
+ will turn that line into an output line. Conversely, clearing a bit
+ will turn that line into an input.
+ - description:
+ Register to set this line as INPUT. Setting a bit in this register
+ will turn that line into an input line. Conversely, clearing a bit
+ will turn that line into an output.
+
+ reg-names:
+ minItems: 1
+ maxItems: 5
+ items:
+ enum:
+ - dat
+ - set
+ - clr
+ - dirout
+ - dirin
+
+ native-endian: true
+
+ no-output:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ If this property is present, the controller cannot drive the GPIO lines.
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - '#gpio-cells'
+ - gpio-controller
+
+additionalProperties: false
+
+examples:
+ - |
+ gpio@1f300010 {
+ compatible = "ni,169445-nand-gpio";
+ reg = <0x1f300010 0x4>;
+ reg-names = "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@e0100000 {
+ compatible = "wd,mbl-gpio";
+ reg-names = "dat";
+ reg = <0xe0100000 0x1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ no-output;
+ };
+
+ gpio@fffe0406 {
+ compatible = "brcm,bcm6345-gpio";
+ reg-names = "dirout", "dat";
+ reg = <0xfffe0406 2>, <0xfffe040a 2>;
+ native-endian;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml b/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml
index 5b0134304e51..452f8972a965 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml
+++ b/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml
@@ -24,6 +24,10 @@ properties:
'#gpio-cells':
const: 2
+ gpio-line-names:
+ minItems: 4
+ maxItems: 8
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt b/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt
deleted file mode 100644
index b33f8f02c0d7..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-STMPE gpio
-----------
-
-Required properties:
- - compatible: "st,stmpe-gpio"
-
-Optional properties:
- - st,norequest-mask: bitmask specifying which GPIOs should _not_ be requestable
- due to different usage (e.g. touch, keypad)
-
-Node should be child node of stmpe node to which it belongs.
-
-Example:
- stmpe_gpio {
- compatible = "st,stmpe-gpio";
- st,norequest-mask = <0x20>; //gpio 5 can't be used
- };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml b/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml
index d2c39dba56ad..7c2d152e8617 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml
+++ b/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml
@@ -61,6 +61,13 @@ properties:
gpio-ranges:
maxItems: 1
+patternProperties:
+ "^.+-hog(-[0-9]+)?$":
+ type: object
+
+ required:
+ - gpio-hog
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml b/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml
index 572e1718f501..5e2496379a3c 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml
+++ b/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Xilinx Zynq GPIO controller
maintainers:
- - Michal Simek <michal.simek@xilinx.com>
+ - Michal Simek <michal.simek@amd.com>
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/gpio/ni,169445-nand-gpio.txt b/Documentation/devicetree/bindings/gpio/ni,169445-nand-gpio.txt
deleted file mode 100644
index ca2f8c745a27..000000000000
--- a/Documentation/devicetree/bindings/gpio/ni,169445-nand-gpio.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-Bindings for the National Instruments 169445 GPIO NAND controller
-
-The 169445 GPIO NAND controller has two memory mapped GPIO registers, one
-for input (the ready signal) and one for output (control signals). It is
-intended to be used with the GPIO NAND driver.
-
-Required properties:
- - compatible: should be "ni,169445-nand-gpio"
- - reg-names: must contain
- "dat" - data register
- - reg: address + size pairs describing the GPIO register sets;
- order must correspond with the order of entries in reg-names
- - #gpio-cells: must be set to 2. The first cell is the pin number and
- the second cell is used to specify the gpio polarity:
- 0 = active high
- 1 = active low
- - gpio-controller: Marks the device node as a gpio controller.
-
-Optional properties:
- - no-output: disables driving output on the pins
-
-Examples:
- gpio1: nand-gpio-out@1f300010 {
- compatible = "ni,169445-nand-gpio";
- reg = <0x1f300010 0x4>;
- reg-names = "dat";
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- gpio2: nand-gpio-in@1f300014 {
- compatible = "ni,169445-nand-gpio";
- reg = <0x1f300014 0x4>;
- reg-names = "dat";
- gpio-controller;
- #gpio-cells = <2>;
- no-output;
- };
diff --git a/Documentation/devicetree/bindings/gpio/st,stmpe-gpio.yaml b/Documentation/devicetree/bindings/gpio/st,stmpe-gpio.yaml
new file mode 100644
index 000000000000..22c0cae73425
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/st,stmpe-gpio.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/st,stmpe-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectonics Port Expander (STMPE) GPIO Block
+
+description:
+ STMicroelectronics Port Expander (STMPE) is a series of slow
+ bus controllers for various expanded peripherals such as GPIO, keypad,
+ touchscreen, ADC, PWM or rotator. It can contain one or several different
+ peripherals connected to SPI or I2C. These bindings pertain to the
+ GPIO portions of these expanders.
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+ compatible:
+ const: st,stmpe-gpio
+
+ "#gpio-cells":
+ const: 2
+
+ "#interrupt-cells":
+ const: 2
+
+ gpio-controller: true
+
+ interrupt-controller: true
+
+ st,norequest-mask:
+ description:
+ A bitmask of GPIO lines that cannot be requested because for
+ for example not being connected to anything on the system
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+patternProperties:
+ "^.+-hog(-[0-9]+)?$":
+ type: object
+
+ required:
+ - gpio-hog
+
+additionalProperties: false
+
+required:
+ - compatible
+ - "#gpio-cells"
+ - "#interrupt-cells"
+ - gpio-controller
+ - interrupt-controller
diff --git a/Documentation/devicetree/bindings/gpio/wd,mbl-gpio.txt b/Documentation/devicetree/bindings/gpio/wd,mbl-gpio.txt
deleted file mode 100644
index 038c3a6a1f4d..000000000000
--- a/Documentation/devicetree/bindings/gpio/wd,mbl-gpio.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-Bindings for the Western Digital's MyBook Live memory-mapped GPIO controllers.
-
-The Western Digital MyBook Live has two memory-mapped GPIO controllers.
-Both GPIO controller only have a single 8-bit data register, where GPIO
-state can be read and/or written.
-
-Required properties:
- - compatible: should be "wd,mbl-gpio"
- - reg-names: must contain
- "dat" - data register
- - reg: address + size pairs describing the GPIO register sets;
- order must correspond with the order of entries in reg-names
- - #gpio-cells: must be set to 2. The first cell is the pin number and
- the second cell is used to specify the gpio polarity:
- 0 = active high
- 1 = active low
- - gpio-controller: Marks the device node as a gpio controller.
-
-Optional properties:
- - no-output: GPIOs are read-only.
-
-Examples:
- gpio0: gpio0@e0000000 {
- compatible = "wd,mbl-gpio";
- reg-names = "dat";
- reg = <0xe0000000 0x1>;
- #gpio-cells = <2>;
- gpio-controller;
- };
-
- gpio1: gpio1@e0100000 {
- compatible = "wd,mbl-gpio";
- reg-names = "dat";
- reg = <0xe0100000 0x1>;
- #gpio-cells = <2>;
- gpio-controller;
- no-output;
- };
diff --git a/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml b/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml
index 31906c253940..1638cfe90f1c 100644
--- a/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml
@@ -44,6 +44,7 @@ patternProperties:
- GPIO0
- GPIO1
- GPIO2
+ - GPIO3
function:
enum:
diff --git a/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml b/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml
index f333ee2288e7..c1060e5fcef3 100644
--- a/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml
+++ b/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Xilinx AXI GPIO controller
maintainers:
- - Neeli Srinivas <srinivas.neeli@xilinx.com>
+ - Neeli Srinivas <srinivas.neeli@amd.com>
description:
The AXI GPIO design provides a general purpose input/output interface
diff --git a/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml b/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml
index 31c0fc345903..18e61aff2185 100644
--- a/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml
+++ b/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml
@@ -12,7 +12,7 @@ description:
PS_MODE). Every pin can be configured as input/output.
maintainers:
- - Piyush Mehta <piyush.mehta@xilinx.com>
+ - Piyush Mehta <piyush.mehta@amd.com>
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
index 0400a361875d..e796a1ff8c82 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
@@ -86,7 +86,7 @@ properties:
const: 2
dynamic-power-coefficient:
- $ref: '/schemas/types.yaml#/definitions/uint32'
+ $ref: /schemas/types.yaml#/definitions/uint32
description:
A u32 value that represents the running time dynamic
power coefficient in units of uW/MHz/V^2. The
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
index 2a25384ca3ef..ca02baba5526 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
@@ -92,7 +92,7 @@ properties:
dma-coherent: true
dynamic-power-coefficient:
- $ref: '/schemas/types.yaml#/definitions/uint32'
+ $ref: /schemas/types.yaml#/definitions/uint32
description:
A u32 value that represents the running time dynamic
power coefficient in units of uW/MHz/V^2. The
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
index 318122d95eb5..0fae1ef013be 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
@@ -33,6 +33,7 @@ properties:
- rockchip,rk3228-mali
- samsung,exynos4210-mali
- stericsson,db8500-mali
+ - xlnx,zynqmp-mali
- const: arm,mali-400
- items:
- enum:
diff --git a/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml b/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml
new file mode 100644
index 000000000000..2dc8b07b4d3b
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/adi,max31827.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices MAX31827, MAX31828, MAX31829 Low-Power Temperature Switch
+
+maintainers:
+ - Daniel Matyas <daniel.matyas@analog.com>
+
+description: |
+ Analog Devices MAX31827, MAX31828, MAX31829 Low-Power Temperature Switch with
+ I2C Interface
+ https://www.analog.com/media/en/technical-documentation/data-sheets/MAX31827-MAX31829.pdf
+
+properties:
+ compatible:
+ oneOf:
+ - const: adi,max31827
+ - items:
+ - enum:
+ - adi,max31828
+ - adi,max31829
+ - const: adi,max31827
+
+ reg:
+ maxItems: 1
+
+ vref-supply:
+ description:
+ Must have values in the interval (1.6V; 3.6V) in order for the device to
+ function correctly.
+
+required:
+ - compatible
+ - reg
+ - vref-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ temperature-sensor@42 {
+ compatible = "adi,max31827";
+ reg = <0x42>;
+ vref-supply = <&reg_vdd>;
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
index ae4f68d4e696..bd67cfee6d19 100644
--- a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
+++ b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
@@ -105,7 +105,7 @@ properties:
G coefficient for temperature equation.
Default for series 5 = 60000
Default for series 6 = 57400
- multipleOf: 1000
+ multipleOf: 100
minimum: 1000
$ref: /schemas/types.yaml#/definitions/uint32
@@ -114,7 +114,7 @@ properties:
H coefficient for temperature equation.
Default for series 5 = 200000
Default for series 6 = 249400
- multipleOf: 1000
+ multipleOf: 100
minimum: 1000
$ref: /schemas/types.yaml#/definitions/uint32
@@ -131,7 +131,7 @@ properties:
J coefficient for temperature equation.
Default for series 5 = -100
Default for series 6 = 0
- multipleOf: 1000
+ multipleOf: 100
maximum: 0
$ref: /schemas/types.yaml#/definitions/int32
diff --git a/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml b/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml
index cb24d7b3221c..ff57c5416ebc 100644
--- a/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml
+++ b/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Cadence I2C controller
maintainers:
- - Michal Simek <michal.simek@xilinx.com>
+ - Michal Simek <michal.simek@amd.com>
allOf:
- $ref: /schemas/i2c/i2c-controller.yaml#
diff --git a/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml b/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml
index 32c821f97779..133855f11b4f 100644
--- a/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml
+++ b/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml
@@ -10,7 +10,7 @@ maintainers:
- Conor Culhane <conor.culhane@silvaco.com>
allOf:
- - $ref: "i3c.yaml#"
+ - $ref: i3c.yaml#
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
index d521d516088b..16def2985ab4 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
@@ -47,6 +47,9 @@ properties:
avdd-supply:
description: AVdd voltage supply
+ vref-supply:
+ description: VRef voltage supply
+
adi,rejection-60-Hz-enable:
description: |
This bit enables a notch at 60 Hz when the first notch of the sinc
@@ -89,6 +92,7 @@ required:
- interrupts
- dvdd-supply
- avdd-supply
+ - vref-supply
- spi-cpol
- spi-cpha
@@ -115,6 +119,7 @@ examples:
interrupt-parent = <&gpio>;
dvdd-supply = <&dvdd>;
avdd-supply = <&avdd>;
+ vref-supply = <&vref>;
adi,refin2-pins-enable;
adi,rejection-60-Hz-enable;
diff --git a/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml b/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml
index 7f79a06e76f5..6168b44ea72c 100644
--- a/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml
@@ -26,6 +26,7 @@ properties:
- mediatek,mt2712-auxadc
- mediatek,mt6765-auxadc
- mediatek,mt7622-auxadc
+ - mediatek,mt7986-auxadc
- mediatek,mt8173-auxadc
- items:
- enum:
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
index bd6e0d6f6e0c..ad7d6fc49de5 100644
--- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
@@ -54,7 +54,7 @@ required:
- '#io-channel-cells'
patternProperties:
- "^.*@[0-9a-f]+$":
+ "^channel@[0-9a-f]+$":
type: object
additionalProperties: false
description: |
@@ -101,7 +101,7 @@ patternProperties:
oneOf:
- items:
- const: 1
- - enum: [ 1, 3, 4, 6, 20, 8, 10 ]
+ - enum: [ 1, 3, 4, 6, 20, 8, 10, 16 ]
- items:
- const: 10
- const: 81
@@ -148,7 +148,7 @@ allOf:
then:
patternProperties:
- "^.*@[0-9a-f]+$":
+ "^channel@[0-9a-f]+$":
properties:
qcom,decimation:
enum: [ 512, 1024, 2048, 4096 ]
@@ -171,7 +171,7 @@ allOf:
then:
patternProperties:
- "^.*@[0-9a-f]+$":
+ "^channel@[0-9a-f]+$":
properties:
qcom,decimation:
enum: [ 256, 512, 1024 ]
@@ -194,7 +194,7 @@ allOf:
then:
patternProperties:
- "^.*@[0-9a-f]+$":
+ "^channel@[0-9a-f]+$":
properties:
qcom,decimation:
enum: [ 250, 420, 840 ]
@@ -217,7 +217,7 @@ allOf:
then:
patternProperties:
- "^.*@[0-9a-f]+$":
+ "^channel@[0-9a-f]+$":
properties:
qcom,decimation:
enum: [ 85, 340, 1360 ]
@@ -249,7 +249,7 @@ examples:
#io-channel-cells = <1>;
/* Channel node */
- adc-chan@39 {
+ channel@39 {
reg = <0x39>;
qcom,decimation = <512>;
qcom,ratiometric;
@@ -258,19 +258,19 @@ examples:
qcom,pre-scaling = <1 3>;
};
- adc-chan@9 {
+ channel@9 {
reg = <0x9>;
};
- adc-chan@a {
+ channel@a {
reg = <0xa>;
};
- adc-chan@e {
+ channel@e {
reg = <0xe>;
};
- adc-chan@f {
+ channel@f {
reg = <0xf>;
};
};
@@ -292,16 +292,18 @@ examples:
#io-channel-cells = <1>;
/* Other properties are omitted */
- xo-therm@44 {
+ channel@44 {
reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
+ label = "xo_therm";
};
- conn-therm@47 {
+ channel@47 {
reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
+ label = "conn_therm";
};
};
};
diff --git a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml
index da50b529c157..aa24b841393c 100644
--- a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml
@@ -15,6 +15,7 @@ properties:
- const: rockchip,saradc
- const: rockchip,rk3066-tsadc
- const: rockchip,rk3399-saradc
+ - const: rockchip,rk3588-saradc
- items:
- enum:
- rockchip,px30-saradc
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml
index 9b072b057f16..a60b1e100ee4 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml
@@ -35,7 +35,7 @@ unevaluatedProperties: false
examples:
- |
spi {
- #address-cells= <1>;
+ #address-cells = <1>;
#size-cells = <0>;
adc@0 {
diff --git a/Documentation/devicetree/bindings/iio/addac/adi,ad74115.yaml b/Documentation/devicetree/bindings/iio/addac/adi,ad74115.yaml
index 72d2e910f206..2594fa192f93 100644
--- a/Documentation/devicetree/bindings/iio/addac/adi,ad74115.yaml
+++ b/Documentation/devicetree/bindings/iio/addac/adi,ad74115.yaml
@@ -216,7 +216,6 @@ properties:
description: Whether to enable burnout current for EXT1.
adi,ext1-burnout-current-nanoamp:
- $ref: /schemas/types.yaml#/definitions/uint32
description:
Burnout current in nanoamps to be applied to EXT1.
enum: [0, 50, 500, 1000, 10000]
@@ -233,7 +232,6 @@ properties:
description: Whether to enable burnout current for EXT2.
adi,ext2-burnout-current-nanoamp:
- $ref: /schemas/types.yaml#/definitions/uint32
description: Burnout current in nanoamps to be applied to EXT2.
enum: [0, 50, 500, 1000, 10000]
default: 0
@@ -249,7 +247,6 @@ properties:
description: Whether to enable burnout current for VIOUT.
adi,viout-burnout-current-nanoamp:
- $ref: /schemas/types.yaml#/definitions/uint32
description: Burnout current in nanoamps to be applied to VIOUT.
enum: [0, 1000, 10000]
default: 0
diff --git a/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml b/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml
index df2589f214e1..dddf97b50549 100644
--- a/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml
+++ b/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml
@@ -13,7 +13,7 @@ description: |
When an io-channel measures the midpoint of a voltage divider, the
interesting voltage is often the voltage over the full resistance
of the divider. This binding describes the voltage divider in such
- a curcuit.
+ a circuit.
Vin ----.
|
diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
index ec64d7877fe5..1db6952ddca5 100644
--- a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
@@ -31,6 +31,9 @@ properties:
- invensense,mpu9250
- invensense,mpu9255
- items:
+ - const: invensense,icm20600
+ - const: invensense,icm20602
+ - items:
- const: invensense,icm20608d
- const: invensense,icm20608
diff --git a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml
index b39f5217d8ff..ee8724ad33ab 100644
--- a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml
@@ -98,6 +98,7 @@ required:
- reg
allOf:
+ - $ref: /schemas/iio/iio.yaml#
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
diff --git a/Documentation/devicetree/bindings/iio/light/rohm,bu27008.yaml b/Documentation/devicetree/bindings/iio/light/rohm,bu27008.yaml
new file mode 100644
index 000000000000..4f66fd47b016
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/rohm,bu27008.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/rohm,bu27008.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BU27008 color sensor
+
+maintainers:
+ - Matti Vaittinen <mazziesaccount@gmail.com>
+
+description:
+ The ROHM BU27008 is a sensor with 5 photodiodes (red, green, blue, clear
+ and IR) with four configurable channels. Red and green being always
+ available and two out of the rest three (blue, clear, IR) can be
+ selected to be simultaneously measured. Typical application is adjusting
+ LCD backlight of TVs, mobile phones and tablet PCs.
+
+properties:
+ compatible:
+ const: rohm,bu27008
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ vdd-supply: true
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ light-sensor@38 {
+ compatible = "rohm,bu27008";
+ reg = <0x38>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/iio/light/ti,opt4001.yaml b/Documentation/devicetree/bindings/iio/light/ti,opt4001.yaml
new file mode 100644
index 000000000000..12b0c7ed5d72
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/ti,opt4001.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/ti,opt4001.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments OPT4001 Ambient Light Sensor
+
+maintainers:
+ - Stefan Windfeldt-Prytz <stefan.windfeldt-prytz@axis.com>
+
+description:
+ Ambient light sensor with an i2c interface.
+ Last part of compatible is for the packaging used.
+ Picostar is a 4 pinned SMT and sot-5x3 is a 8 pinned SOT.
+ https://www.ti.com/lit/gpn/opt4001
+
+properties:
+ compatible:
+ enum:
+ - ti,opt4001-picostar
+ - ti,opt4001-sot-5x3
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ vdd-supply:
+ description: Regulator that provides power to the sensor
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: ti,opt4001-sot-5x3
+ then:
+ properties:
+ interrupts:
+ maxItems: 1
+ else:
+ properties:
+ interrupts: false
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ light-sensor@44 {
+ compatible = "ti,opt4001-sot-5x3";
+ reg = <0x44>;
+ vdd-supply = <&vdd_reg>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/iio/potentiometer/renesas,x9250.yaml b/Documentation/devicetree/bindings/iio/potentiometer/renesas,x9250.yaml
new file mode 100644
index 000000000000..ab5c09c00ff4
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/potentiometer/renesas,x9250.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/potentiometer/renesas,x9250.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas X9250 quad potentiometers
+
+maintainers:
+ - Herve Codina <herve.codina@bootlin.com>
+
+description:
+ The Renesas X9250 integrates four digitally controlled potentiometers.
+ On each potentiometer, the X9250T has a 100 kOhms total resistance and the
+ X9250U has a 50 kOhms total resistance.
+
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml
+
+properties:
+ compatible:
+ enum:
+ - renesas,x9250t
+ - renesas,x9250u
+
+ reg:
+ maxItems: 1
+
+ vcc-supply:
+ description:
+ Regulator for the VCC power supply.
+
+ avp-supply:
+ description:
+ Regulator for the analog V+ power supply.
+
+ avn-supply:
+ description:
+ Regulator for the analog V- power supply.
+
+ '#io-channel-cells':
+ const: 1
+
+ spi-max-frequency:
+ maximum: 2000000
+
+ wp-gpios:
+ maxItems: 1
+ description:
+ GPIO connected to the write-protect pin.
+
+required:
+ - compatible
+ - reg
+ - vcc-supply
+ - avp-supply
+ - avn-supply
+ - '#io-channel-cells'
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ potentiometer@0 {
+ compatible = "renesas,x9250t";
+ reg = <0>;
+ vcc-supply = <&vcc_regulator>;
+ avp-supply = <&avp_regulator>;
+ avn-supply = <&avp_regulator>;
+ wp-gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ spi-max-frequency = <2000000>;
+ #io-channel-cells = <1>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml b/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml
new file mode 100644
index 000000000000..c0a923febf13
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/pressure/honeywell,mprls0025pa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Honeywell mprls0025pa pressure sensor
+
+maintainers:
+ - Andreas Klinger <ak@it-klinger.de>
+
+description: |
+ Honeywell pressure sensor of model mprls0025pa.
+
+ This sensor has an I2C and SPI interface. Only the I2C interface is
+ implemented.
+
+ There are many models with different pressure ranges available. The vendor
+ calls them "mpr series". All of them have the identical programming model and
+ differ in the pressure range, unit and transfer function.
+
+ To support different models one need to specify the pressure range as well as
+ the transfer function. Pressure range needs to be converted from its unit to
+ pascal.
+
+ The transfer function defines the ranges of numerical values delivered by the
+ sensor. The minimal range value stands for the minimum pressure and the
+ maximum value also for the maximum pressure with linear relation inside the
+ range.
+
+ Specifications about the devices can be found at:
+ https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/
+ products/sensors/pressure-sensors/board-mount-pressure-sensors/
+ micropressure-mpr-series/documents/
+ sps-siot-mpr-series-datasheet-32332628-ciid-172626.pdf
+
+properties:
+ compatible:
+ const: honeywell,mprls0025pa
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ reset-gpios:
+ description:
+ Optional GPIO for resetting the device.
+ If not present the device is not resetted during the probe.
+ maxItems: 1
+
+ honeywell,pmin-pascal:
+ description:
+ Minimum pressure value the sensor can measure in pascal.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ honeywell,pmax-pascal:
+ description:
+ Maximum pressure value the sensor can measure in pascal.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ honeywell,transfer-function:
+ description: |
+ Transfer function which defines the range of valid values delivered by the
+ sensor.
+ 1 - A, 10% to 90% of 2^24 (1677722 .. 15099494)
+ 2 - B, 2.5% to 22.5% of 2^24 (419430 .. 3774874)
+ 3 - C, 20% to 80% of 2^24 (3355443 .. 13421773)
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ vdd-supply:
+ description: provide VDD power to the sensor.
+
+required:
+ - compatible
+ - reg
+ - honeywell,pmin-pascal
+ - honeywell,pmax-pascal
+ - honeywell,transfer-function
+ - vdd-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pressure@18 {
+ compatible = "honeywell,mprls0025pa";
+ reg = <0x18>;
+ reset-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <21 IRQ_TYPE_EDGE_FALLING>;
+ honeywell,pmin-pascal = <0>;
+ honeywell,pmax-pascal = <172369>;
+ honeywell,transfer-function = <1>;
+ vdd-supply = <&vcc_3v3>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/iio/st,st-sensors.yaml b/Documentation/devicetree/bindings/iio/st,st-sensors.yaml
index 1ff3afca9149..e450821a741d 100644
--- a/Documentation/devicetree/bindings/iio/st,st-sensors.yaml
+++ b/Documentation/devicetree/bindings/iio/st,st-sensors.yaml
@@ -84,6 +84,7 @@ properties:
- st,lps35hw
- description: IMUs
enum:
+ - st,lsm303d-imu
- st,lsm9ds0-imu
- description: Deprecated bindings
enum:
diff --git a/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90614.yaml b/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90614.yaml
index d6965a0c1cf3..654d31f65d36 100644
--- a/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90614.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90614.yaml
@@ -4,7 +4,7 @@
$id: http://devicetree.org/schemas/iio/temperature/melexis,mlx90614.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Melexis MLX90614 contactless IR temperature sensor
+title: Melexis MLX90614/MLX90615 contactless IR temperature sensor
maintainers:
- Peter Meerwald <pmeerw@pmeerw.net>
@@ -15,7 +15,9 @@ description: |
properties:
compatible:
- const: melexis,mlx90614
+ enum:
+ - melexis,mlx90614
+ - melexis,mlx90615
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/iio/temperature/ti,tmp006.yaml b/Documentation/devicetree/bindings/iio/temperature/ti,tmp006.yaml
new file mode 100644
index 000000000000..d43002b9bfdc
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/temperature/ti,tmp006.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/temperature/ti,tmp006.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI TMP006 IR thermopile sensor
+
+maintainers:
+ - Peter Meerwald <pmeerw@pmeerw.net>
+
+description: |
+ TI TMP006 - Infrared Thermopile Sensor in Chip-Scale Package.
+ https://cdn.sparkfun.com/datasheets/Sensors/Temp/tmp006.pdf
+
+properties:
+ compatible:
+ const: ti,tmp006
+
+ reg:
+ maxItems: 1
+
+ vdd-supply:
+ description: provide VDD power to the sensor.
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ temperature-sensor@40 {
+ compatible = "ti,tmp006";
+ reg = <0x40>;
+ vdd-supply = <&ldo4_reg>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml b/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
index 3ec579d63570..c40799355ed7 100644
--- a/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
+++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
@@ -14,6 +14,9 @@ description: |
Atmel maXTouch touchscreen or touchpads such as the mXT244
and similar devices.
+allOf:
+ - $ref: input.yaml#
+
properties:
compatible:
const: atmel,maxtouch
@@ -60,6 +63,10 @@ properties:
or experiment to determine which bit corresponds to which input. Use
KEY_RESERVED for unused padding values.
+ linux,keycodes:
+ minItems: 1
+ maxItems: 8
+
atmel,wakeup-method:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
diff --git a/Documentation/devicetree/bindings/input/cypress,cyapa.txt b/Documentation/devicetree/bindings/input/cypress,cyapa.txt
deleted file mode 100644
index d3db65916a36..000000000000
--- a/Documentation/devicetree/bindings/input/cypress,cyapa.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-Cypress I2C Touchpad
-
-Required properties:
-- compatible: must be "cypress,cyapa".
-- reg: I2C address of the chip.
-- interrupts: interrupt to which the chip is connected (see interrupt
- binding[0]).
-
-Optional properties:
-- wakeup-source: touchpad can be used as a wakeup source.
-- pinctrl-names: should be "default" (see pinctrl binding [1]).
-- pinctrl-0: a phandle pointing to the pin settings for the device (see
- pinctrl binding [1]).
-- vcc-supply: a phandle for the regulator supplying 3.3V power.
-
-[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-[1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
-
-Example:
- &i2c0 {
- /* ... */
-
- /* Cypress Gen3 touchpad */
- touchpad@67 {
- compatible = "cypress,cyapa";
- reg = <0x67>;
- interrupt-parent = <&gpio>;
- interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO 2 */
- wakeup-source;
- };
-
- /* Cypress Gen5 and later touchpad */
- touchpad@24 {
- compatible = "cypress,cyapa";
- reg = <0x24>;
- interrupt-parent = <&gpio>;
- interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO 2 */
- wakeup-source;
- };
-
- /* ... */
- };
diff --git a/Documentation/devicetree/bindings/input/cypress,cyapa.yaml b/Documentation/devicetree/bindings/input/cypress,cyapa.yaml
new file mode 100644
index 000000000000..29515151abe9
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/cypress,cyapa.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/cypress,cyapa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cypress All Points Addressable (APA) I2C Touchpad / Trackpad
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+properties:
+ compatible:
+ const: cypress,cyapa
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ wakeup-source: true
+
+ vcc-supply:
+ description: 3.3V power
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ trackpad@67 {
+ reg = <0x67>;
+ compatible = "cypress,cyapa";
+ interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-parent = <&gpx1>;
+ wakeup-source;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml b/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml
index ce18d7dadae2..1edad1da1196 100644
--- a/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml
+++ b/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml
@@ -43,6 +43,15 @@ properties:
itself as long as it allows the main board to make signals compatible
with what the touchscreen is expecting for its IO rails.
+ goodix,no-reset-during-suspend:
+ description:
+ Set this to true to enforce the driver to not assert the reset GPIO
+ during suspend.
+ Due to potential touchscreen hardware flaw, back-powering could happen in
+ suspend if the power supply is on and with active-low reset GPIO asserted.
+ This property is used to avoid the back-powering issue.
+ type: boolean
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml b/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml
index 037c3ae9f1c3..e34c9e78d38d 100644
--- a/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml
+++ b/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml
@@ -55,7 +55,7 @@ patternProperties:
interrupt-names: true
- linux-keycodes:
+ linux,keycodes:
maxItems: 1
wakeup-source: true
diff --git a/Documentation/devicetree/bindings/input/pwm-vibrator.yaml b/Documentation/devicetree/bindings/input/pwm-vibrator.yaml
index d32716c604fe..6398534b43c3 100644
--- a/Documentation/devicetree/bindings/input/pwm-vibrator.yaml
+++ b/Documentation/devicetree/bindings/input/pwm-vibrator.yaml
@@ -32,6 +32,8 @@ properties:
minItems: 1
maxItems: 2
+ enable-gpios: true
+
vcc-supply: true
direction-duty-cycle-ns:
diff --git a/Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml b/Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml
index 1959ec394768..4080422a9eb5 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml
@@ -40,6 +40,8 @@ properties:
linux,keycodes:
description: EV_ABS specific event code generated by the axis.
+ wakeup-source: true
+
patternProperties:
"^button@[0-9]+$":
type: object
diff --git a/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml b/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml
index f7a5e31c506e..fc21fe3e7b37 100644
--- a/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml
+++ b/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml
@@ -51,7 +51,7 @@ properties:
type: object
fsl,ddrc:
- $ref: "/schemas/types.yaml#/definitions/phandle"
+ $ref: /schemas/types.yaml#/definitions/phandle
description:
Phandle to DDR Controller.
diff --git a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
deleted file mode 100644
index bde63f8f090e..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-Amlogic meson GPIO interrupt controller
-
-Meson SoCs contains an interrupt controller which is able to watch the SoC
-pads and generate an interrupt on edge or level. The controller is essentially
-a 256 pads to 8 GIC interrupt multiplexer, with a filter block to select edge
-or level and polarity. It does not expose all 256 mux inputs because the
-documentation shows that the upper part is not mapped to any pad. The actual
-number of interrupt exposed depends on the SoC.
-
-Required properties:
-
-- compatible : must have "amlogic,meson8-gpio-intc" and either
- "amlogic,meson8-gpio-intc" for meson8 SoCs (S802) or
- "amlogic,meson8b-gpio-intc" for meson8b SoCs (S805) or
- "amlogic,meson-gxbb-gpio-intc" for GXBB SoCs (S905) or
- "amlogic,meson-gxl-gpio-intc" for GXL SoCs (S905X, S912)
- "amlogic,meson-axg-gpio-intc" for AXG SoCs (A113D, A113X)
- "amlogic,meson-g12a-gpio-intc" for G12A SoCs (S905D2, S905X2, S905Y2)
- "amlogic,meson-sm1-gpio-intc" for SM1 SoCs (S905D3, S905X3, S905Y3)
- "amlogic,meson-a1-gpio-intc" for A1 SoCs (A113L)
- "amlogic,meson-s4-gpio-intc" for S4 SoCs (S802X2, S905Y4, S805X2G, S905W2)
-- reg : Specifies base physical address and size of the registers.
-- interrupt-controller : Identifies the node as an interrupt controller.
-- #interrupt-cells : Specifies the number of cells needed to encode an
- interrupt source. The value must be 2.
-- meson,channel-interrupts: Array with the 8 upstream hwirq numbers. These
- are the hwirqs used on the parent interrupt controller.
-
-Example:
-
-gpio_interrupt: interrupt-controller@9880 {
- compatible = "amlogic,meson-gxbb-gpio-intc",
- "amlogic,meson-gpio-intc";
- reg = <0x0 0x9880 0x0 0x10>;
- interrupt-controller;
- #interrupt-cells = <2>;
- meson,channel-interrupts = <64 65 66 67 68 69 70 71>;
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml
new file mode 100644
index 000000000000..e84e4f33b358
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/amlogic,meson-gpio-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson GPIO interrupt controller
+
+maintainers:
+ - Heiner Kallweit <hkallweit1@gmail.com>
+
+description: |
+ Meson SoCs contains an interrupt controller which is able to watch the SoC
+ pads and generate an interrupt on edge or level. The controller is essentially
+ a 256 pads to 8 or 12 GIC interrupt multiplexer, with a filter block to select
+ edge or level and polarity. It does not expose all 256 mux inputs because the
+ documentation shows that the upper part is not mapped to any pad. The actual
+ number of interrupts exposed depends on the SoC.
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - const: amlogic,meson-gpio-intc
+ - items:
+ - enum:
+ - amlogic,meson8-gpio-intc
+ - amlogic,meson8b-gpio-intc
+ - amlogic,meson-gxbb-gpio-intc
+ - amlogic,meson-gxl-gpio-intc
+ - amlogic,meson-axg-gpio-intc
+ - amlogic,meson-g12a-gpio-intc
+ - amlogic,meson-sm1-gpio-intc
+ - amlogic,meson-a1-gpio-intc
+ - amlogic,meson-s4-gpio-intc
+ - const: amlogic,meson-gpio-intc
+
+ reg:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 2
+
+ amlogic,channel-interrupts:
+ description: Array with the upstream hwirq numbers
+ minItems: 8
+ maxItems: 12
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+
+required:
+ - compatible
+ - reg
+ - interrupt-controller
+ - "#interrupt-cells"
+ - amlogic,channel-interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ interrupt-controller@9880 {
+ compatible = "amlogic,meson-gxbb-gpio-intc",
+ "amlogic,meson-gpio-intc";
+ reg = <0x9880 0x10>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
+ };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,eiointc.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,eiointc.yaml
new file mode 100644
index 000000000000..393c128a41d8
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,eiointc.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/loongson,eiointc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson Extended I/O Interrupt Controller
+
+maintainers:
+ - Binbin Zhou <zhoubinbin@loongson.cn>
+
+description: |
+ This interrupt controller is found on the Loongson-3 family chips and
+ Loongson-2K series chips and is used to distribute interrupts directly to
+ individual cores without forwarding them through the HT's interrupt line.
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+ compatible:
+ enum:
+ - loongson,ls2k0500-eiointc
+ - loongson,ls2k2000-eiointc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-controller
+ - '#interrupt-cells'
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ eiointc: interrupt-controller@1fe11600 {
+ compatible = "loongson,ls2k0500-eiointc";
+ reg = <0x1fe10000 0x10000>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <3>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/microchip,eic.yaml b/Documentation/devicetree/bindings/interrupt-controller/microchip,sama7g5-eic.yaml
index 50003880ee6f..d56ba65b17d1 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/microchip,eic.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/microchip,sama7g5-eic.yaml
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
-$id: http://devicetree.org/schemas/interrupt-controller/microchip,eic.yaml#
+$id: http://devicetree.org/schemas/interrupt-controller/microchip,sama7g5-eic.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Microchip External Interrupt Controller
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ralink,rt2880-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/ralink,rt2880-intc.yaml
new file mode 100644
index 000000000000..0fa952a9edfd
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/ralink,rt2880-intc.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/ralink,rt2880-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ralink SoCs Interrupt Controller
+
+maintainers:
+ - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+
+description:
+ This interrupt controller support a central point for interrupt aggregation
+ for platform related blocks.
+
+properties:
+ compatible:
+ const: ralink,rt2880-intc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-controller
+ - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ interrupt-controller@200 {
+ compatible = "ralink,rt2880-intc";
+ reg = <0x200 0x100>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
index f75736a061af..dc1f28e55266 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
@@ -57,14 +57,15 @@ properties:
- const: andestech,nceplic100
- items:
- enum:
+ - canaan,k210-plic
- sifive,fu540-c000-plic
- starfive,jh7100-plic
- starfive,jh7110-plic
- - canaan,k210-plic
- const: sifive,plic-1.0.0
- items:
- enum:
- allwinner,sun20i-d1-plic
+ - thead,th1520-plic
- const: thead,c900-plic
- items:
- const: sifive,plic-1.0.0
diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
index ba677d401e24..3a31a979709b 100644
--- a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
+++ b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
@@ -29,6 +29,7 @@ properties:
- qcom,msm8996-smmu-v2
- qcom,msm8998-smmu-v2
- qcom,sdm630-smmu-v2
+ - qcom,sm6375-smmu-v2
- const: qcom,smmu-v2
- description: Qcom SoCs implementing "qcom,smmu-500" and "arm,mmu-500"
@@ -45,6 +46,7 @@ properties:
- qcom,sdm845-smmu-500
- qcom,sdx55-smmu-500
- qcom,sdx65-smmu-500
+ - qcom,sdx75-smmu-500
- qcom,sm6115-smmu-500
- qcom,sm6125-smmu-500
- qcom,sm6350-smmu-500
@@ -79,7 +81,9 @@ properties:
- description: Qcom Adreno GPUs implementing "qcom,smmu-500" and "arm,mmu-500"
items:
- enum:
+ - qcom,sa8775p-smmu-500
- qcom,sc7280-smmu-500
+ - qcom,sc8280xp-smmu-500
- qcom,sm6115-smmu-500
- qcom,sm6125-smmu-500
- qcom,sm8150-smmu-500
@@ -267,6 +271,7 @@ allOf:
enum:
- qcom,msm8998-smmu-v2
- qcom,sdm630-smmu-v2
+ - qcom,sm6375-smmu-v2
then:
anyOf:
- properties:
@@ -331,7 +336,10 @@ allOf:
properties:
compatible:
contains:
- const: qcom,sc7280-smmu-500
+ enum:
+ - qcom,sa8775p-smmu-500
+ - qcom,sc7280-smmu-500
+ - qcom,sc8280xp-smmu-500
then:
properties:
clock-names:
@@ -413,10 +421,8 @@ allOf:
- nvidia,smmu-500
- qcom,qcm2290-smmu-500
- qcom,qdu1000-smmu-500
- - qcom,sa8775p-smmu-500
- qcom,sc7180-smmu-500
- qcom,sc8180x-smmu-500
- - qcom,sc8280xp-smmu-500
- qcom,sdm670-smmu-500
- qcom,sdm845-smmu-500
- qcom,sdx55-smmu-500
diff --git a/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml b/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml
new file mode 100644
index 000000000000..feb5febaf361
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml
@@ -0,0 +1,126 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/awinic,aw200xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AWINIC AW200XX LED
+
+maintainers:
+ - Martin Kurbanov <mmkurbanov@sberdevices.ru>
+
+description: |
+ This controller is present on AW20036/AW20054/AW20072.
+ It is a 3x12/6x9/6x12 matrix LED programmed via
+ an I2C interface, up to 36/54/72 LEDs or 12/18/24 RGBs,
+ 3 pattern controllers for auto breathing or group dimming control.
+
+ For more product information please see the link below:
+ aw20036 - https://www.awinic.com/en/productDetail/AW20036QNR#tech-docs
+ aw20054 - https://www.awinic.com/en/productDetail/AW20054QNR#tech-docs
+ aw20072 - https://www.awinic.com/en/productDetail/AW20072QNR#tech-docs
+
+properties:
+ compatible:
+ enum:
+ - awinic,aw20036
+ - awinic,aw20054
+ - awinic,aw20072
+
+ reg:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ awinic,display-rows:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Leds matrix size
+
+patternProperties:
+ "^led@[0-9a-f]$":
+ type: object
+ $ref: common.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ reg:
+ description:
+ LED number
+ maxItems: 1
+
+ led-max-microamp:
+ default: 9780
+ description: |
+ Note that a driver will take the minimum of all LED limits
+ since the chip has a single global setting.
+ The maximum output current of each LED is calculated by the
+ following formula:
+ IMAXled = 160000 * (592 / 600.5) * (1 / display-rows)
+ And the minimum output current formula:
+ IMINled = 3300 * (592 / 600.5) * (1 / display-rows)
+
+required:
+ - compatible
+ - reg
+ - "#address-cells"
+ - "#size-cells"
+ - awinic,display-rows
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: awinic,aw20036
+ then:
+ properties:
+ awinic,display-rows:
+ enum: [1, 2, 3]
+ else:
+ properties:
+ awinic,display-rows:
+ enum: [1, 2, 3, 4, 5, 6, 7]
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/leds/common.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led-controller@3a {
+ compatible = "awinic,aw20036";
+ reg = <0x3a>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ awinic,display-rows = <3>;
+
+ led@0 {
+ reg = <0x0>;
+ color = <LED_COLOR_ID_RED>;
+ led-max-microamp = <9780>;
+ };
+
+ led@1 {
+ reg = <0x1>;
+ color = <LED_COLOR_ID_GREEN>;
+ led-max-microamp = <9780>;
+ };
+
+ led@2 {
+ reg = <0x2>;
+ color = <LED_COLOR_ID_BLUE>;
+ led-max-microamp = <9780>;
+ };
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml
index e1191453c2f0..c914e1276982 100644
--- a/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml
@@ -21,6 +21,9 @@ properties:
compatible:
const: kinetic,ktz8866
+ reg:
+ maxItems: 1
+
vddpos-supply:
description: positive boost supply regulator.
@@ -33,6 +36,7 @@ properties:
current-num-sinks:
description: number of the LED current sinks' channels.
+ $ref: /schemas/types.yaml#/definitions/uint32
enum: [1, 2, 3, 4, 5, 6]
kinetic,current-ramp-delay-ms:
@@ -53,6 +57,7 @@ properties:
required:
- compatible
+ - reg
- vddpos-supply
- vddneg-supply
- enable-gpios
@@ -63,14 +68,19 @@ examples:
- |
#include <dt-bindings/gpio/gpio.h>
- backlight {
- compatible = "kinetic,ktz8866";
-
- vddpos-supply = <&bl_vddpos_5p5>;
- vddneg-supply = <&bl_vddneg_5p5>;
- enable-gpios = <&tlmm 139 GPIO_ACTIVE_HIGH>;
- current-num-sinks = <5>;
- kinetic,current-ramp-delay-ms = <128>;
- kinetic,led-enable-ramp-delay-ms = <1>;
- kinetic,enable-lcd-bias;
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ backlight@11 {
+ compatible = "kinetic,ktz8866";
+ reg = <0x11>;
+ vddpos-supply = <&bl_vddpos_5p5>;
+ vddneg-supply = <&bl_vddneg_5p5>;
+ enable-gpios = <&tlmm 139 GPIO_ACTIVE_HIGH>;
+ current-num-sinks = <5>;
+ kinetic,current-ramp-delay-ms = <128>;
+ kinetic,led-enable-ramp-delay-ms = <1>;
+ kinetic,enable-lcd-bias;
+ };
};
diff --git a/Documentation/devicetree/bindings/leds/backlight/lp855x-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/lp855x-backlight.yaml
new file mode 100644
index 000000000000..9416e1bfab92
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/lp855x-backlight.yaml
@@ -0,0 +1,149 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/lp855x-backlight.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments LP855X backlight controllers
+
+maintainers:
+ - Artur Weber <aweber.kernel@gmail.com>
+
+properties:
+ compatible:
+ enum:
+ - ti,lp8550
+ - ti,lp8551
+ - ti,lp8552
+ - ti,lp8553
+ - ti,lp8555
+ - ti,lp8556
+ - ti,lp8557
+
+ reg:
+ maxItems: 1
+
+ dev-ctrl:
+ $ref: /schemas/types.yaml#/definitions/uint8
+ description:
+ Value of device control register. This is a device-specific value.
+
+ bl-name:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: Backlight device name.
+
+ init-brt:
+ $ref: /schemas/types.yaml#/definitions/uint8
+ description: Initial value of backlight brightness.
+
+ power-supply:
+ description: Regulator which controls the 3V rail.
+
+ enable-supply:
+ description: Regulator which controls the EN/VDDIO input.
+
+ pwms:
+ maxItems: 1
+ description: |
+ PWM channel to use for controlling the backlight; setting this
+ enables the PWM-based backlight control mode.
+
+ pwm-names: true
+
+ pwm-period:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ PWM period value. Deprecated; set the period value in the pwms
+ property instead.
+ deprecated: true
+
+patternProperties:
+ "^rom-[0-9a-f]{2}h$":
+ type: object
+ description: Nodes containing the values of configuration registers.
+ additionalProperties: false
+ properties:
+ rom-addr:
+ $ref: /schemas/types.yaml#/definitions/uint8
+ description: Register address of ROM area to be updated.
+
+ rom-val:
+ $ref: /schemas/types.yaml#/definitions/uint8
+ description: Value to write to the ROM register.
+
+required:
+ - compatible
+ - reg
+ - dev-ctrl
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ backlight@2c {
+ compatible = "ti,lp8555";
+ reg = <0x2c>;
+
+ dev-ctrl = /bits/ 8 <0x00>;
+
+ pwms = <&pwm 0 10000>;
+ pwm-names = "lp8555";
+
+ /* 4V OV, 4 output LED0 string enabled */
+ rom-14h {
+ rom-addr = /bits/ 8 <0x14>;
+ rom-val = /bits/ 8 <0xcf>;
+ };
+
+ /* Heavy smoothing, 24ms ramp time step */
+ rom-15h {
+ rom-addr = /bits/ 8 <0x15>;
+ rom-val = /bits/ 8 <0xc7>;
+ };
+
+ /* 4 output LED1 string enabled */
+ rom-19h {
+ rom-addr = /bits/ 8 <0x19>;
+ rom-val = /bits/ 8 <0x0f>;
+ };
+ };
+ };
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ backlight@2c {
+ compatible = "ti,lp8556";
+ reg = <0x2c>;
+
+ bl-name = "lcd-bl";
+ dev-ctrl = /bits/ 8 <0x85>;
+ init-brt = /bits/ 8 <0x10>;
+ };
+ };
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ backlight@2c {
+ compatible = "ti,lp8557";
+ reg = <0x2c>;
+ enable-supply = <&backlight_vddio>;
+ power-supply = <&backlight_vdd>;
+
+ dev-ctrl = /bits/ 8 <0x41>;
+ init-brt = /bits/ 8 <0x0a>;
+
+ /* 4V OV, 4 output LED string enabled */
+ rom-14h {
+ rom-addr = /bits/ 8 <0x14>;
+ rom-val = /bits/ 8 <0xcf>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/leds/backlight/lp855x.txt b/Documentation/devicetree/bindings/leds/backlight/lp855x.txt
deleted file mode 100644
index 88f56641fc28..000000000000
--- a/Documentation/devicetree/bindings/leds/backlight/lp855x.txt
+++ /dev/null
@@ -1,72 +0,0 @@
-lp855x bindings
-
-Required properties:
- - compatible: "ti,lp8550", "ti,lp8551", "ti,lp8552", "ti,lp8553",
- "ti,lp8555", "ti,lp8556", "ti,lp8557"
- - reg: I2C slave address (u8)
- - dev-ctrl: Value of DEVICE CONTROL register (u8). It depends on the device.
-
-Optional properties:
- - bl-name: Backlight device name (string)
- - init-brt: Initial value of backlight brightness (u8)
- - pwm-period: PWM period value. Set only PWM input mode used (u32)
- - rom-addr: Register address of ROM area to be updated (u8)
- - rom-val: Register value to be updated (u8)
- - power-supply: Regulator which controls the 3V rail
- - enable-supply: Regulator which controls the EN/VDDIO input
-
-Example:
-
- /* LP8555 */
- backlight@2c {
- compatible = "ti,lp8555";
- reg = <0x2c>;
-
- dev-ctrl = /bits/ 8 <0x00>;
- pwm-period = <10000>;
-
- /* 4V OV, 4 output LED0 string enabled */
- rom_14h {
- rom-addr = /bits/ 8 <0x14>;
- rom-val = /bits/ 8 <0xcf>;
- };
-
- /* Heavy smoothing, 24ms ramp time step */
- rom_15h {
- rom-addr = /bits/ 8 <0x15>;
- rom-val = /bits/ 8 <0xc7>;
- };
-
- /* 4 output LED1 string enabled */
- rom_19h {
- rom-addr = /bits/ 8 <0x19>;
- rom-val = /bits/ 8 <0x0f>;
- };
- };
-
- /* LP8556 */
- backlight@2c {
- compatible = "ti,lp8556";
- reg = <0x2c>;
-
- bl-name = "lcd-bl";
- dev-ctrl = /bits/ 8 <0x85>;
- init-brt = /bits/ 8 <0x10>;
- };
-
- /* LP8557 */
- backlight@2c {
- compatible = "ti,lp8557";
- reg = <0x2c>;
- enable-supply = <&backlight_vddio>;
- power-supply = <&backlight_vdd>;
-
- dev-ctrl = /bits/ 8 <0x41>;
- init-brt = /bits/ 8 <0x0a>;
-
- /* 4V OV, 4 output LED string enabled */
- rom_14h {
- rom-addr = /bits/ 8 <0x14>;
- rom-val = /bits/ 8 <0xcf>;
- };
- };
diff --git a/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml
index 5ec47a8c6568..535690288990 100644
--- a/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml
@@ -68,7 +68,6 @@ dependencies:
required:
- compatible
- pwms
- - power-supply
additionalProperties: false
diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml
index 11aedf1650a1..58b492d00246 100644
--- a/Documentation/devicetree/bindings/leds/common.yaml
+++ b/Documentation/devicetree/bindings/leds/common.yaml
@@ -105,8 +105,6 @@ properties:
- audio-mute
# LED indicates bluetooth power state
- bluetooth-power
- # LED indicates activity of all CPUs
- - cpu
# LED indicates camera flash state
- flash
# LED indicated keyboard capslock
diff --git a/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml b/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
index 31840e33dcf5..e850a8894758 100644
--- a/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
@@ -34,7 +34,7 @@ required:
- color
allOf:
- - $ref: "common.yaml#"
+ - $ref: common.yaml#
additionalProperties: true
diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml
index ae607911f1db..058be1fedbc8 100644
--- a/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml
@@ -66,6 +66,14 @@ properties:
'#size-cells':
const: 0
+ ti,charge-pump-mode:
+ description:
+ Set the operating mode of the internal charge pump as defined in
+ <dt-bindings/leds/leds-lp55xx.h>.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 3 # auto
+ maximum: 3
+
patternProperties:
'^multi-led@[0-8]$':
type: object
@@ -152,6 +160,7 @@ additionalProperties: false
examples:
- |
#include <dt-bindings/leds/common.h>
+ #include <dt-bindings/leds/leds-lp55xx.h>
i2c {
#address-cells = <1>;
@@ -164,6 +173,7 @@ examples:
reg = <0x32>;
clock-mode = /bits/ 8 <2>;
pwr-sel = /bits/ 8 <3>; /* D1~9 connected to VOUT */
+ ti,charge-pump-mode = <LP55XX_CP_BYPASS>;
led@0 {
reg = <0>;
diff --git a/Documentation/devicetree/bindings/leds/leds-mt6323.txt b/Documentation/devicetree/bindings/leds/leds-mt6323.txt
index 73353692efa1..052dccb8f2ce 100644
--- a/Documentation/devicetree/bindings/leds/leds-mt6323.txt
+++ b/Documentation/devicetree/bindings/leds/leds-mt6323.txt
@@ -12,7 +12,10 @@ For MediaTek PMIC wrapper bindings see:
Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml
Required properties:
-- compatible : Must be "mediatek,mt6323-led"
+- compatible : Must be one of
+ - "mediatek,mt6323-led"
+ - "mediatek,mt6331-led"
+ - "mediatek,mt6332-led"
- address-cells : Must be 1
- size-cells : Must be 0
diff --git a/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml
index 6295c91f43e8..e6f1999cb22f 100644
--- a/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml
@@ -16,18 +16,24 @@ description: >
properties:
compatible:
- enum:
- - qcom,pm660l-lpg
- - qcom,pm8150b-lpg
- - qcom,pm8150l-lpg
- - qcom,pm8350c-pwm
- - qcom,pm8916-pwm
- - qcom,pm8941-lpg
- - qcom,pm8994-lpg
- - qcom,pmc8180c-lpg
- - qcom,pmi8994-lpg
- - qcom,pmi8998-lpg
- - qcom,pmk8550-pwm
+ oneOf:
+ - enum:
+ - qcom,pm660l-lpg
+ - qcom,pm8150b-lpg
+ - qcom,pm8150l-lpg
+ - qcom,pm8350c-pwm
+ - qcom,pm8916-pwm
+ - qcom,pm8941-lpg
+ - qcom,pm8994-lpg
+ - qcom,pmc8180c-lpg
+ - qcom,pmi632-lpg
+ - qcom,pmi8994-lpg
+ - qcom,pmi8998-lpg
+ - qcom,pmk8550-pwm
+ - items:
+ - enum:
+ - qcom,pm8550-pwm
+ - const: qcom,pm8350c-pwm
"#pwm-cells":
const: 2
diff --git a/Documentation/devicetree/bindings/leds/leds-sgm3140.yaml b/Documentation/devicetree/bindings/leds/leds-sgm3140.yaml
index 4d2ffe5fcfc7..37d2a93780ab 100644
--- a/Documentation/devicetree/bindings/leds/leds-sgm3140.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-sgm3140.yaml
@@ -20,6 +20,7 @@ properties:
compatible:
enum:
- ocs,ocp8110
+ - richtek,rt5033-led
- sgmicro,sgm3140
enable-gpios:
diff --git a/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml b/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml
index ffacf703d9f9..a8736fd5a539 100644
--- a/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml
+++ b/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml
@@ -26,6 +26,8 @@ properties:
- qcom,pm8150c-flash-led
- qcom,pm8150l-flash-led
- qcom,pm8350c-flash-led
+ - qcom,pm8550-flash-led
+ - qcom,pmi8998-flash-led
- const: qcom,spmi-flash-led
reg:
diff --git a/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml
index 64b0be9cf70b..58f0d94c6d71 100644
--- a/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml
+++ b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml
@@ -32,7 +32,7 @@ patternProperties:
properties:
rohm,led-compatible:
description: LED identification string
- $ref: "/schemas/types.yaml#/definitions/string"
+ $ref: /schemas/types.yaml#/definitions/string
enum:
- bd71828-ambled
- bd71828-grnled
diff --git a/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.txt b/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.txt
deleted file mode 100644
index b48d7d30012c..000000000000
--- a/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Broadcom BCM2835 VideoCore mailbox IPC
-
-Required properties:
-
-- compatible: Should be "brcm,bcm2835-mbox"
-- reg: Specifies base physical address and size of the registers
-- interrupts: The interrupt number
- See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
-- #mbox-cells: Specifies the number of cells needed to encode a mailbox
- channel. The value shall be 0, since there is only one
- mailbox channel implemented by the device.
-
-Example:
-
-mailbox: mailbox@7e00b880 {
- compatible = "brcm,bcm2835-mbox";
- reg = <0x7e00b880 0x40>;
- interrupts = <0 1>;
- #mbox-cells = <0>;
-};
-
-firmware: firmware {
- compatible = "raspberrypi,firmware";
- mboxes = <&mailbox>;
- #power-domain-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.yaml b/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.yaml
new file mode 100644
index 000000000000..9588817f4511
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/brcm,bcm2835-mbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM2835 VideoCore mailbox IPC
+
+maintainers:
+ - Stefan Wahren <stefan.wahren@i2se.com>
+
+properties:
+ compatible:
+ const: brcm,bcm2835-mbox
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ "#mbox-cells":
+ const: 0
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - "#mbox-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ mailbox@7e00b880 {
+ compatible = "brcm,bcm2835-mbox";
+ reg = <0x7e00b880 0x40>;
+ interrupts = <0 1>;
+ #mbox-cells = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.yaml b/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.yaml
index a3e87516d637..2d14fc948999 100644
--- a/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.yaml
+++ b/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.yaml
@@ -66,6 +66,7 @@ properties:
oneOf:
- const: nvidia,tegra186-hsp
- const: nvidia,tegra194-hsp
+ - const: nvidia,tegra264-hsp
- items:
- const: nvidia,tegra234-hsp
- const: nvidia,tegra194-hsp
diff --git a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml
index 32d7bbc98cac..d2e25ff6db7f 100644
--- a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml
+++ b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml
@@ -18,6 +18,7 @@ properties:
oneOf:
- items:
- enum:
+ - qcom,ipq5018-apcs-apps-global
- qcom,ipq5332-apcs-apps-global
- qcom,ipq8074-apcs-apps-global
- qcom,ipq9574-apcs-apps-global
diff --git a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml
index 374ffe64016f..aeaddbf574b0 100644
--- a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml
+++ b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml
@@ -33,7 +33,7 @@ description: |
+------------------------------------------+
maintainers:
- - Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
+ - Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml
index 444f24838d3d..6c72e77b927c 100644
--- a/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml
@@ -65,9 +65,14 @@ properties:
properties:
data-lanes: true
+ bus-type:
+ enum:
+ - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+ - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
required:
- data-lanes
+ - bus-type
required:
- port@4
@@ -82,6 +87,7 @@ additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/media/video-interfaces.h>
i2c@e6508000 {
#address-cells = <1>;
@@ -101,6 +107,7 @@ examples:
port@4 {
reg = <4>;
max96712_out0: endpoint {
+ bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
clock-lanes = <0>;
data-lanes = <1 2 3 4>;
remote-endpoint = <&csi40_in>;
diff --git a/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml b/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml
index eb1499912c58..9cc0a968a401 100644
--- a/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml
@@ -155,7 +155,7 @@ examples:
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-msm8916.h>
- camss: camss@1b00000 {
+ camss: camss@1b0ac00 {
compatible = "qcom,msm8916-camss";
clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
diff --git a/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml b/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml
index 8a10aa1cafc5..5cb0e337ea6e 100644
--- a/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml
@@ -221,7 +221,7 @@ examples:
#include <dt-bindings/clock/qcom,gcc-msm8996.h>
#include <dt-bindings/clock/qcom,mmcc-msm8996.h>
- camss: camss@a00000 {
+ camss: camss@a34000 {
compatible = "qcom,msm8996-camss";
clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
diff --git a/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
index 0a109e126064..584106e275f6 100644
--- a/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
@@ -227,7 +227,7 @@ examples:
#include <dt-bindings/clock/qcom,gcc-sdm660.h>
#include <dt-bindings/clock/qcom,mmcc-sdm660.h>
- camss: camss@ca00000 {
+ camss: camss@ca00020 {
compatible = "qcom,sdm660-camss";
clocks = <&mmcc CAMSS_AHB_CLK>,
diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml
index 1530ad0d80bd..ec4380a0a03f 100644
--- a/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml
@@ -219,7 +219,7 @@ examples:
#address-cells = <2>;
#size-cells = <2>;
- camss: camss@a00000 {
+ camss: camss@acb3000 {
compatible = "qcom,sdm845-camss";
clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
index 7dde7967c886..1e72b8808d24 100644
--- a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
@@ -137,7 +137,7 @@ examples:
cru_parallel_in: endpoint@0 {
reg = <0>;
- remote-endpoint= <&ov5642>;
+ remote-endpoint = <&ov5642>;
hsync-active = <1>;
vsync-active = <1>;
};
@@ -150,7 +150,7 @@ examples:
cru_csi_in: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi_cru_in>;
+ remote-endpoint = <&csi_cru_in>;
};
};
};
diff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml
index 91e8f368fb52..324703bfb1bd 100644
--- a/Documentation/devicetree/bindings/media/renesas,vin.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml
@@ -303,11 +303,11 @@ examples:
vin0csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin0>;
+ remote-endpoint = <&csi20vin0>;
};
vin0csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin0>;
+ remote-endpoint = <&csi40vin0>;
};
};
};
diff --git a/Documentation/devicetree/bindings/media/rockchip-rga.yaml b/Documentation/devicetree/bindings/media/rockchip-rga.yaml
index dd645ddccb07..ea2342222408 100644
--- a/Documentation/devicetree/bindings/media/rockchip-rga.yaml
+++ b/Documentation/devicetree/bindings/media/rockchip-rga.yaml
@@ -21,7 +21,9 @@ properties:
- const: rockchip,rk3288-rga
- const: rockchip,rk3399-rga
- items:
- - const: rockchip,rk3228-rga
+ - enum:
+ - rockchip,rk3228-rga
+ - rockchip,rk3568-rga
- const: rockchip,rk3288-rga
reg:
diff --git a/Documentation/devicetree/bindings/media/rockchip-vpu.yaml b/Documentation/devicetree/bindings/media/rockchip-vpu.yaml
index ee622a8ee1cc..772ec3283bc6 100644
--- a/Documentation/devicetree/bindings/media/rockchip-vpu.yaml
+++ b/Documentation/devicetree/bindings/media/rockchip-vpu.yaml
@@ -24,6 +24,7 @@ properties:
- rockchip,rk3399-vpu
- rockchip,px30-vpu
- rockchip,rk3568-vpu
+ - rockchip,rk3588-av1-vpu
- items:
- const: rockchip,rk3188-vpu
- const: rockchip,rk3066-vpu
diff --git a/Documentation/devicetree/bindings/media/s5p-mfc.txt b/Documentation/devicetree/bindings/media/s5p-mfc.txt
index 8eb90c043d5d..e69de29bb2d1 100644
--- a/Documentation/devicetree/bindings/media/s5p-mfc.txt
+++ b/Documentation/devicetree/bindings/media/s5p-mfc.txt
@@ -1,78 +0,0 @@
-* Samsung Multi Format Codec (MFC)
-
-Multi Format Codec (MFC) is the IP present in Samsung SoCs which
-supports high resolution decoding and encoding functionalities.
-The MFC device driver is a v4l2 driver which can encode/decode
-video raw/elementary streams and has support for all popular
-video codecs.
-
-Required properties:
- - compatible : value should be either one among the following
- (a) "samsung,mfc-v5" for MFC v5 present in Exynos4 SoCs
- (b) "samsung,mfc-v6" for MFC v6 present in Exynos5 SoCs
- (c) "samsung,exynos3250-mfc", "samsung,mfc-v7" for MFC v7
- present in Exynos3250 SoC
- (d) "samsung,mfc-v7" for MFC v7 present in Exynos5420 SoC
- (e) "samsung,mfc-v8" for MFC v8 present in Exynos5800 SoC
- (f) "samsung,exynos5433-mfc" for MFC v8 present in Exynos5433 SoC
- (g) "samsung,mfc-v10" for MFC v10 present in Exynos7880 SoC
-
- - reg : Physical base address of the IP registers and length of memory
- mapped region.
-
- - interrupts : MFC interrupt number to the CPU.
- - clocks : from common clock binding: handle to mfc clock.
- - clock-names : from common clock binding: must contain "mfc",
- corresponding to entry in the clocks property.
-
-Optional properties:
- - power-domains : power-domain property defined with a phandle
- to respective power domain.
- - memory-region : from reserved memory binding: phandles to two reserved
- memory regions, first is for "left" mfc memory bus interfaces,
- second if for the "right" mfc memory bus, used when no SYSMMU
- support is available; used only by MFC v5 present in Exynos4 SoCs
-
-Obsolete properties:
- - samsung,mfc-r, samsung,mfc-l : support removed, please use memory-region
- property instead
-
-
-Example:
-SoC specific DT entry:
-
-mfc: codec@13400000 {
- compatible = "samsung,mfc-v5";
- reg = <0x13400000 0x10000>;
- interrupts = <0 94 0>;
- power-domains = <&pd_mfc>;
- clocks = <&clock 273>;
- clock-names = "mfc";
-};
-
-Reserved memory specific DT entry for given board (see reserved memory binding
-for more information):
-
-reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- mfc_left: region@51000000 {
- compatible = "shared-dma-pool";
- no-map;
- reg = <0x51000000 0x800000>;
- };
-
- mfc_right: region@43000000 {
- compatible = "shared-dma-pool";
- no-map;
- reg = <0x43000000 0x800000>;
- };
-};
-
-Board specific DT entry:
-
-codec@13400000 {
- memory-region = <&mfc_left>, <&mfc_right>;
-};
diff --git a/Documentation/devicetree/bindings/media/samsung,s5p-mfc.yaml b/Documentation/devicetree/bindings/media/samsung,s5p-mfc.yaml
new file mode 100644
index 000000000000..084b44582a43
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/samsung,s5p-mfc.yaml
@@ -0,0 +1,184 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/samsung,s5p-mfc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos Multi Format Codec (MFC)
+
+maintainers:
+ - Marek Szyprowski <m.szyprowski@samsung.com>
+ - Aakarsh Jain <aakarsh.jain@samsung.com>
+
+description:
+ Multi Format Codec (MFC) is the IP present in Samsung SoCs which
+ supports high resolution decoding and encoding functionalities.
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - samsung,exynos5433-mfc # Exynos5433
+ - samsung,mfc-v5 # Exynos4
+ - samsung,mfc-v6 # Exynos5
+ - samsung,mfc-v7 # Exynos5420
+ - samsung,mfc-v8 # Exynos5800
+ - samsung,mfc-v10 # Exynos7880
+ - items:
+ - enum:
+ - samsung,exynos3250-mfc # Exynos3250
+ - const: samsung,mfc-v7 # Fall back for Exynos3250
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 3
+
+ clock-names:
+ minItems: 1
+ maxItems: 3
+
+ interrupts:
+ maxItems: 1
+
+ iommus:
+ minItems: 1
+ maxItems: 2
+
+ iommu-names:
+ minItems: 1
+ maxItems: 2
+
+ power-domains:
+ maxItems: 1
+
+ memory-region:
+ minItems: 1
+ maxItems: 2
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - interrupts
+
+additionalProperties: false
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - samsung,exynos3250-mfc
+ then:
+ properties:
+ clocks:
+ maxItems: 2
+ clock-names:
+ items:
+ - const: mfc
+ - const: sclk_mfc
+ iommus:
+ maxItems: 1
+ iommus-names: false
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - samsung,exynos5433-mfc
+ then:
+ properties:
+ clocks:
+ maxItems: 3
+ clock-names:
+ items:
+ - const: pclk
+ - const: aclk
+ - const: aclk_xiu
+ iommus:
+ maxItems: 2
+ iommus-names:
+ items:
+ - const: left
+ - const: right
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - samsung,mfc-v5
+ then:
+ properties:
+ clocks:
+ maxItems: 2
+ clock-names:
+ items:
+ - const: mfc
+ - const: sclk_mfc
+ iommus:
+ maxItems: 2
+ iommus-names:
+ items:
+ - const: left
+ - const: right
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - samsung,mfc-v6
+ - samsung,mfc-v8
+ then:
+ properties:
+ clocks:
+ maxItems: 1
+ clock-names:
+ items:
+ - const: mfc
+ iommus:
+ maxItems: 2
+ iommus-names:
+ items:
+ - const: left
+ - const: right
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - samsung,mfc-v7
+ then:
+ properties:
+ clocks:
+ minItems: 1
+ maxItems: 2
+ iommus:
+ minItems: 1
+ maxItems: 2
+
+examples:
+ - |
+ #include <dt-bindings/clock/exynos4.h>
+ #include <dt-bindings/clock/exynos-audss-clk.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ codec@13400000 {
+ compatible = "samsung,mfc-v5";
+ reg = <0x13400000 0x10000>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&pd_mfc>;
+ clocks = <&clock CLK_MFC>, <&clock CLK_SCLK_MFC>;
+ clock-names = "mfc", "sclk_mfc";
+ iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
+ iommu-names = "left", "right";
+ };
diff --git a/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml b/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml
index 7d77823dbb7a..43daf837fc9f 100644
--- a/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml
+++ b/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Xilinx MIPI CSI-2 Receiver Subsystem
maintainers:
- - Vishal Sagar <vishal.sagar@xilinx.com>
+ - Vishal Sagar <vishal.sagar@amd.com>
description: |
The Xilinx MIPI CSI-2 Receiver Subsystem is used to capture MIPI CSI-2
diff --git a/Documentation/devicetree/bindings/memory-controllers/nuvoton,npcm-memory-controller.yaml b/Documentation/devicetree/bindings/memory-controllers/nuvoton,npcm-memory-controller.yaml
new file mode 100644
index 000000000000..ac1a5a17749d
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/nuvoton,npcm-memory-controller.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/nuvoton,npcm-memory-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NPCM Memory Controller
+
+maintainers:
+ - Marvin Lin <kflin@nuvoton.com>
+ - Stanley Chu <yschu@nuvoton.com>
+
+description: |
+ The Nuvoton BMC SoC supports DDR4 memory with or without ECC (error correction
+ check).
+
+ The memory controller supports single bit error correction, double bit error
+ detection (in-line ECC in which a section (1/8th) of the memory device used to
+ store data is used for ECC storage).
+
+ Note, the bootloader must configure ECC mode for the memory controller.
+
+properties:
+ compatible:
+ enum:
+ - nuvoton,npcm750-memory-controller
+ - nuvoton,npcm845-memory-controller
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ mc: memory-controller@f0824000 {
+ compatible = "nuvoton,npcm750-memory-controller";
+ reg = <0xf0824000 0x1000>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ };
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml
index 2fa44951cfde..f54e553e6c0e 100644
--- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml
@@ -165,7 +165,7 @@ patternProperties:
const: 0
lpddr2:
- $ref: "ddr/jedec,lpddr2.yaml#"
+ $ref: ddr/jedec,lpddr2.yaml#
type: object
patternProperties:
diff --git a/Documentation/devicetree/bindings/memory-controllers/snps,dw-umctl2-ddrc.yaml b/Documentation/devicetree/bindings/memory-controllers/snps,dw-umctl2-ddrc.yaml
index e68c4306025a..87ff9ee098f5 100644
--- a/Documentation/devicetree/bindings/memory-controllers/snps,dw-umctl2-ddrc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/snps,dw-umctl2-ddrc.yaml
@@ -8,8 +8,7 @@ title: Synopsys DesignWare Universal Multi-Protocol Memory Controller
maintainers:
- Krzysztof Kozlowski <krzk@kernel.org>
- - Manish Narani <manish.narani@xilinx.com>
- - Michal Simek <michal.simek@xilinx.com>
+ - Michal Simek <michal.simek@amd.com>
description: |
Synopsys DesignWare Enhanced uMCTL2 DDR Memory Controller is capable of
diff --git a/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml
index bc9406929f6c..b049837ee669 100644
--- a/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml
@@ -129,7 +129,7 @@ patternProperties:
The child device node represents the device connected to the GPMC
bus. The device can be a NAND chip, SRAM device, NOR device
or an ASIC.
- $ref: "ti,gpmc-child.yaml"
+ $ref: ti,gpmc-child.yaml
required:
diff --git a/Documentation/devicetree/bindings/memory-controllers/xlnx,zynq-ddrc-a05.yaml b/Documentation/devicetree/bindings/memory-controllers/xlnx,zynq-ddrc-a05.yaml
index 8f72e2f8588a..75143db51411 100644
--- a/Documentation/devicetree/bindings/memory-controllers/xlnx,zynq-ddrc-a05.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/xlnx,zynq-ddrc-a05.yaml
@@ -8,8 +8,7 @@ title: Zynq A05 DDR Memory Controller
maintainers:
- Krzysztof Kozlowski <krzk@kernel.org>
- - Manish Narani <manish.narani@xilinx.com>
- - Michal Simek <michal.simek@xilinx.com>
+ - Michal Simek <michal.simek@amd.com>
description:
The Zynq DDR ECC controller has an optional ECC support in half-bus width
diff --git a/Documentation/devicetree/bindings/mfd/adi,max77541.yaml b/Documentation/devicetree/bindings/mfd/adi,max77541.yaml
new file mode 100644
index 000000000000..c7895b2c38c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/adi,max77541.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/adi,max77541.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MAX77540/MAX77541 PMIC from ADI
+
+maintainers:
+ - Okan Sahin <okan.sahin@analog.com>
+
+description: |
+ MAX77540 is a Power Management IC with 2 buck regulators.
+
+ MAX77541 is a Power Management IC with 2 buck regulators and 1 ADC.
+
+properties:
+ compatible:
+ enum:
+ - adi,max77540
+ - adi,max77541
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ regulators:
+ $ref: /schemas/regulator/adi,max77541-regulator.yaml#
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic@69 {
+ compatible = "adi,max77541";
+ reg = <0x69>;
+ interrupt-parent = <&gpio>;
+ interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+
+ regulators {
+ buck1 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <5200000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ buck2 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <5200000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml
index 148f1da47603..9f9a14af875e 100644
--- a/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml
@@ -35,11 +35,11 @@ patternProperties:
"^gpio@[0-9a-f]+$":
# Child node
type: object
- $ref: "../gpio/brcm,bcm6345-gpio.yaml"
+ $ref: "../gpio/brcm,bcm63xx-gpio.yaml"
description:
GPIO controller for the SoC GPIOs. This child node definition
should follow the bindings specified in
- Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml.
+ Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml.
"^pinctrl@[0-9a-f]+$":
# Child node
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml
index 7e582243ea76..803277dd2725 100644
--- a/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml
@@ -35,11 +35,11 @@ patternProperties:
"^gpio@[0-9a-f]+$":
# Child node
type: object
- $ref: "../gpio/brcm,bcm6345-gpio.yaml"
+ $ref: "../gpio/brcm,bcm63xx-gpio.yaml"
description:
GPIO controller for the SoC GPIOs. This child node definition
should follow the bindings specified in
- Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml.
+ Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml.
"^pinctrl@[0-9a-f]+$":
# Child node
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml
index 2230848e11c3..b9a6856ce970 100644
--- a/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml
@@ -35,11 +35,11 @@ patternProperties:
"^gpio@[0-9a-f]+$":
# Child node
type: object
- $ref: "../gpio/brcm,bcm6345-gpio.yaml"
+ $ref: "../gpio/brcm,bcm63xx-gpio.yaml"
description:
GPIO controller for the SoC GPIOs. This child node definition
should follow the bindings specified in
- Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml.
+ Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml.
"^pinctrl@[0-9a-f]+$":
# Child node
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml
index c06693b6f7aa..4651fe4dde07 100644
--- a/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml
@@ -35,11 +35,11 @@ patternProperties:
"^gpio@[0-9a-f]+$":
# Child node
type: object
- $ref: "../gpio/brcm,bcm6345-gpio.yaml"
+ $ref: "../gpio/brcm,bcm63xx-gpio.yaml"
description:
GPIO controller for the SoC GPIOs. This child node definition
should follow the bindings specified in
- Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml.
+ Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml.
"^pinctrl@[0-9a-f]+$":
# Child node
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml
index c560bede0e37..0330b621fd38 100644
--- a/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml
@@ -35,11 +35,11 @@ patternProperties:
"^gpio@[0-9a-f]+$":
# Child node
type: object
- $ref: "../gpio/brcm,bcm6345-gpio.yaml"
+ $ref: "../gpio/brcm,bcm63xx-gpio.yaml"
description:
GPIO controller for the SoC GPIOs. This child node definition
should follow the bindings specified in
- Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml.
+ Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml.
"^pinctrl@[0-9a-f]+$":
# Child node
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml
index c534f5f2404e..82d3e4415bda 100644
--- a/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml
@@ -35,11 +35,11 @@ patternProperties:
"^gpio@[0-9a-f]+$":
# Child node
type: object
- $ref: "../gpio/brcm,bcm6345-gpio.yaml"
+ $ref: "../gpio/brcm,bcm63xx-gpio.yaml"
description:
GPIO controller for the SoC GPIOs. This child node definition
should follow the bindings specified in
- Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml.
+ Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml.
"^pinctrl@[0-9a-f]+$":
# Child node
diff --git a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
index acb9c54942d9..dc379f3ebf24 100644
--- a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
+++ b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
@@ -122,12 +122,6 @@ patternProperties:
compatible:
const: gw,gsc-fan
- "#address-cells":
- const: 1
-
- "#size-cells":
- const: 0
-
reg:
description: The fan controller base address
maxItems: 1
@@ -135,8 +129,6 @@ patternProperties:
required:
- compatible
- reg
- - "#address-cells"
- - "#size-cells"
required:
- compatible
@@ -194,8 +186,6 @@ examples:
};
fan-controller@2c {
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "gw,gsc-fan";
reg = <0x2c>;
};
diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
index 36de335a33aa..8b9a2008a354 100644
--- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
+++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
@@ -71,6 +71,7 @@ properties:
- qcom,pm8998
- qcom,pma8084
- qcom,pmd9635
+ - qcom,pmi632
- qcom,pmi8950
- qcom,pmi8962
- qcom,pmi8994
@@ -133,6 +134,7 @@ patternProperties:
oneOf:
- $ref: /schemas/power/supply/qcom,pm8941-charger.yaml#
- $ref: /schemas/power/supply/qcom,pm8941-coincell.yaml#
+ - $ref: /schemas/power/supply/qcom,pmi8998-charger.yaml#
"gpio@[0-9a-f]+$":
type: object
@@ -146,6 +148,10 @@ patternProperties:
type: object
$ref: /schemas/nvmem/qcom,spmi-sdam.yaml#
+ "phy@[0-9a-f]+$":
+ type: object
+ $ref: /schemas/phy/qcom,snps-eusb2-repeater.yaml#
+
"pon@[0-9a-f]+$":
type: object
$ref: /schemas/power/reset/qcom,pon.yaml#
diff --git a/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml
index fe790af7b4fb..5ad9d5deaaf8 100644
--- a/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml
+++ b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml
@@ -34,6 +34,7 @@ properties:
- qcom,tcsr-ipq5332
- qcom,tcsr-ipq6018
- qcom,tcsr-ipq8064
+ - qcom,tcsr-ipq8074
- qcom,tcsr-ipq9574
- qcom,tcsr-mdm9615
- qcom,tcsr-msm8226
diff --git a/Documentation/devicetree/bindings/mfd/richtek,rt5033.yaml b/Documentation/devicetree/bindings/mfd/richtek,rt5033.yaml
new file mode 100644
index 000000000000..386b1a50158a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/richtek,rt5033.yaml
@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/richtek,rt5033.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT5033 Power Management Integrated Circuit
+
+maintainers:
+ - Jakob Hauser <jahau@rocketmail.com>
+
+description:
+ RT5033 is a multifunction device which includes battery charger, fuel gauge,
+ flash LED current source, LDO and synchronous Buck converter for portable
+ applications. It is interfaced to host controller using I2C interface. The
+ battery fuel gauge uses a separate I2C bus.
+
+properties:
+ compatible:
+ const: richtek,rt5033
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ regulators:
+ description:
+ The regulators of RT5033 have to be instantiated under a sub-node named
+ "regulators". For SAFE_LDO voltage there is only one value of 4.9 V. LDO
+ voltage ranges from 1.2 V to 3.0 V in 0.1 V steps. BUCK voltage ranges
+ from 1.0 V to 3.0 V in 0.1 V steps.
+ type: object
+ patternProperties:
+ "^(SAFE_LDO|LDO|BUCK)$":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ unevaluatedProperties: false
+ additionalProperties: false
+
+ charger:
+ type: object
+ $ref: /schemas/power/supply/richtek,rt5033-charger.yaml#
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ battery: battery {
+ compatible = "simple-battery";
+ precharge-current-microamp = <450000>;
+ constant-charge-current-max-microamp = <1000000>;
+ charge-term-current-microamp = <150000>;
+ precharge-upper-limit-microvolt = <3500000>;
+ constant-charge-voltage-max-microvolt = <4350000>;
+ };
+
+ extcon {
+ usb_con: connector {
+ compatible = "usb-b-connector";
+ label = "micro-USB";
+ type = "micro";
+ };
+ };
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ fuel-gauge@35 {
+ compatible = "richtek,rt5033-battery";
+ reg = <0x35>;
+
+ interrupt-parent = <&msmgpio>;
+ interrupts = <121 IRQ_TYPE_EDGE_FALLING>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&fg_alert_default>;
+
+ power-supplies = <&rt5033_charger>;
+ };
+ };
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ pmic@34 {
+ compatible = "richtek,rt5033";
+ reg = <0x34>;
+
+ interrupt-parent = <&msmgpio>;
+ interrupts = <62 IRQ_TYPE_EDGE_FALLING>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_default>;
+
+ regulators {
+ safe_ldo_reg: SAFE_LDO {
+ regulator-name = "SAFE_LDO";
+ regulator-min-microvolt = <4900000>;
+ regulator-max-microvolt = <4900000>;
+ regulator-always-on;
+ };
+ ldo_reg: LDO {
+ regulator-name = "LDO";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+ buck_reg: BUCK {
+ regulator-name = "BUCK";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+ };
+
+ rt5033_charger: charger {
+ compatible = "richtek,rt5033-charger";
+ monitored-battery = <&battery>;
+ richtek,usb-connector = <&usb_con>;
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk806.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk806.yaml
new file mode 100644
index 000000000000..cf2500f2e9a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rockchip,rk806.yaml
@@ -0,0 +1,406 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rockchip,rk806.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RK806 Power Management Integrated Circuit
+
+maintainers:
+ - Sebastian Reichel <sebastian.reichel@collabora.com>
+
+description:
+ Rockchip RK806 series PMIC. This device consists of an spi or
+ i2c controlled MFD that includes multiple switchable regulators.
+
+properties:
+ compatible:
+ enum:
+ - rockchip,rk806
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+
+ vcc1-supply:
+ description:
+ The input supply for dcdc-reg1.
+
+ vcc2-supply:
+ description:
+ The input supply for dcdc-reg2.
+
+ vcc3-supply:
+ description:
+ The input supply for dcdc-reg3.
+
+ vcc4-supply:
+ description:
+ The input supply for dcdc-reg4.
+
+ vcc5-supply:
+ description:
+ The input supply for dcdc-reg5.
+
+ vcc6-supply:
+ description:
+ The input supply for dcdc-reg6.
+
+ vcc7-supply:
+ description:
+ The input supply for dcdc-reg7.
+
+ vcc8-supply:
+ description:
+ The input supply for dcdc-reg8.
+
+ vcc9-supply:
+ description:
+ The input supply for dcdc-reg9.
+
+ vcc10-supply:
+ description:
+ The input supply for dcdc-reg10.
+
+ vcc11-supply:
+ description:
+ The input supply for pldo-reg1, pldo-reg2 and pldo-reg3.
+
+ vcc12-supply:
+ description:
+ The input supply for pldo-reg4 and pldo-reg5.
+
+ vcc13-supply:
+ description:
+ The input supply for nldo-reg1, nldo-reg2 and nldo-reg3.
+
+ vcc14-supply:
+ description:
+ The input supply for nldo-reg4 and nldo-reg5.
+
+ vcca-supply:
+ description:
+ The input supply for pldo-reg6.
+
+ regulators:
+ type: object
+ additionalProperties: false
+ patternProperties:
+ "^(dcdc-reg([1-9]|10)|pldo-reg[1-6]|nldo-reg[1-5])$":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ unevaluatedProperties: false
+
+patternProperties:
+ '-pins$':
+ type: object
+ additionalProperties: false
+ $ref: /schemas/pinctrl/pinmux-node.yaml
+
+ properties:
+ function:
+ enum: [pin_fun0, pin_fun1, pin_fun2, pin_fun3, pin_fun4, pin_fun5]
+
+ pins:
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [gpio_pwrctrl1, gpio_pwrctrl2, gpio_pwrctrl3]
+
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/pinctrl/rockchip.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/gpio/gpio.h>
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic@0 {
+ compatible = "rockchip,rk806";
+ reg = <0x0>;
+
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+
+ vcc1-supply = <&vcc5v0_sys>;
+ vcc2-supply = <&vcc5v0_sys>;
+ vcc3-supply = <&vcc5v0_sys>;
+ vcc4-supply = <&vcc5v0_sys>;
+ vcc5-supply = <&vcc5v0_sys>;
+ vcc6-supply = <&vcc5v0_sys>;
+ vcc7-supply = <&vcc5v0_sys>;
+ vcc8-supply = <&vcc5v0_sys>;
+ vcc9-supply = <&vcc5v0_sys>;
+ vcc10-supply = <&vcc5v0_sys>;
+ vcc11-supply = <&vcc_2v0_pldo_s3>;
+ vcc12-supply = <&vcc5v0_sys>;
+ vcc13-supply = <&vcc5v0_sys>;
+ vcc14-supply = <&vcc_1v1_nldo_s3>;
+ vcca-supply = <&vcc5v0_sys>;
+
+ regulators {
+ vdd_gpu_s0: dcdc-reg1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_gpu_s0";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_npu_s0: dcdc-reg2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_npu_s0";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_log_s0: dcdc-reg3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_log_s0";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <750000>;
+ };
+ };
+
+ vdd_vdenc_s0: dcdc-reg4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_vdenc_s0";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu_mem_s0: dcdc-reg5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_gpu_mem_s0";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_npu_mem_s0: dcdc-reg6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_npu_mem_s0";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_2v0_pldo_s3: dcdc-reg7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_2v0_pldo_s3";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <2000000>;
+ };
+ };
+
+ vdd_vdenc_mem_s0: dcdc-reg8 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_vdenc_mem_s0";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd2_ddr_s3: dcdc-reg9 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vdd2_ddr_s3";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_1v1_nldo_s3: dcdc-reg10 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vcc_1v1_nldo_s3";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1100000>;
+ };
+ };
+
+ avcc_1v8_s0: pldo-reg1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "avcc_1v8_s0";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd1_1v8_ddr_s3: pldo-reg2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd1_1v8_ddr_s3";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc_1v8_s3: pldo-reg3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vcc_1v8_s3";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc_3v3_s0: pldo-reg4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vcc_3v3_s0";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vccio_sd_s0: pldo-reg5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vccio_sd_s0";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ master_pldo6_s3: pldo-reg6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "master_pldo6_s3";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdd_0v75_s3: nldo-reg1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_0v75_s3";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <750000>;
+ };
+ };
+
+ vdd2l_0v9_ddr_s3: nldo-reg2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-name = "vdd2l_0v9_ddr_s3";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ master_nldo3: nldo-reg3 {
+ regulator-name = "master_nldo3";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ avdd_0v75_s0: nldo-reg4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+ regulator-name = "avdd_0v75_s0";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_0v85_s0: nldo-reg5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ regulator-name = "vdd_0v85_s0";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml b/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml
index 10c7b408f33a..aea0b7d57d04 100644
--- a/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml
+++ b/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml
@@ -153,29 +153,18 @@ dependencies:
additionalProperties: false
allOf:
- - if:
+ - not:
required:
- s5m8767,pmic-buck2-uses-gpio-dvs
- then:
- properties:
- s5m8767,pmic-buck3-uses-gpio-dvs: false
- s5m8767,pmic-buck4-uses-gpio-dvs: false
-
- - if:
- required:
- s5m8767,pmic-buck3-uses-gpio-dvs
- then:
- properties:
- s5m8767,pmic-buck2-uses-gpio-dvs: false
- s5m8767,pmic-buck4-uses-gpio-dvs: false
-
- - if:
+ - not:
required:
+ - s5m8767,pmic-buck2-uses-gpio-dvs
+ - s5m8767,pmic-buck4-uses-gpio-dvs
+ - not:
+ required:
+ - s5m8767,pmic-buck3-uses-gpio-dvs
- s5m8767,pmic-buck4-uses-gpio-dvs
- then:
- properties:
- s5m8767,pmic-buck2-uses-gpio-dvs: false
- s5m8767,pmic-buck3-uses-gpio-dvs: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml
index 9573e4af949e..97c61097f9e2 100644
--- a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml
+++ b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml
@@ -184,7 +184,7 @@ properties:
additionalProperties: false
patternProperties:
- "^(buck[1-4]|ldo[1-6]|boost|pwr_sw[1-2])-supply$":
+ "^(buck[1-4]|ldo[1-6]|vref_ddr|boost|pwr_sw[1-2])-supply$":
description: STPMIC1 voltage regulators supplies
"^(buck[1-4]|ldo[1-6]|boost|vref_ddr|pwr_sw[1-2])$":
diff --git a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
index 0c98d913747b..e6289fbe6907 100644
--- a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
+++ b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
@@ -101,7 +101,7 @@ examples:
};
clock-controller@4140 {
- compatible = "ti,am654-ehrpwm-tbclk", "syscon";
+ compatible = "ti,am654-ehrpwm-tbclk";
reg = <0x4140 0x18>;
#clock-cells = <1>;
};
diff --git a/Documentation/devicetree/bindings/mfd/ti,tps6594.yaml b/Documentation/devicetree/bindings/mfd/ti,tps6594.yaml
new file mode 100644
index 000000000000..9d43376bebed
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ti,tps6594.yaml
@@ -0,0 +1,193 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ti,tps6594.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI TPS6594 Power Management Integrated Circuit
+
+maintainers:
+ - Julien Panis <jpanis@baylibre.com>
+
+description:
+ TPS6594 is a Power Management IC which provides regulators and others
+ features like GPIOs, RTC, watchdog, ESMs (Error Signal Monitor), and
+ PFSM (Pre-configurable Finite State Machine) managing the state of the device.
+ TPS6594 is the super-set device while TPS6593 and LP8764 are derivatives.
+
+properties:
+ compatible:
+ enum:
+ - ti,lp8764-q1
+ - ti,tps6593-q1
+ - ti,tps6594-q1
+
+ reg:
+ description: I2C slave address or SPI chip select number.
+ maxItems: 1
+
+ ti,primary-pmic:
+ type: boolean
+ description: |
+ Identify the primary PMIC on SPMI bus.
+ A multi-PMIC synchronization scheme is implemented in the PMIC device
+ to synchronize the power state changes with other PMIC devices. This is
+ accomplished through a SPMI bus: the primary PMIC is the controller
+ device on the SPMI bus, and the secondary PMICs are the target devices
+ on the SPMI bus.
+
+ system-power-controller: true
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+ description: |
+ The first cell is the pin number, the second cell is used to specify flags.
+ See ../gpio/gpio.txt for more information.
+
+ interrupts:
+ maxItems: 1
+
+ regulators:
+ type: object
+ description: List of regulators provided by this controller.
+
+ patternProperties:
+ "^buck([1-5]|12|34|123|1234)$":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+
+ unevaluatedProperties: false
+
+ "^ldo[1-4]$":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+
+ unevaluatedProperties: false
+
+ allOf:
+ - if:
+ required:
+ - buck12
+ then:
+ properties:
+ buck123: false
+ buck1234: false
+ - if:
+ required:
+ - buck123
+ then:
+ properties:
+ buck34: false
+ - if:
+ required:
+ - buck1234
+ then:
+ properties:
+ buck34: false
+
+ additionalProperties: false
+
+patternProperties:
+ "^buck([1-5]|12|34|123|1234)-supply$":
+ description: Input supply phandle for each buck.
+
+ "^ldo[1-4]-supply$":
+ description: Input supply phandle for each ldo.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tps6593: pmic@48 {
+ compatible = "ti,tps6593-q1";
+ reg = <0x48>;
+ ti,primary-pmic;
+ system-power-controller;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_irq_pins_default>;
+ interrupt-parent = <&mcu_gpio0>;
+ interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+
+ buck123-supply = <&vcc_3v3_sys>;
+ buck4-supply = <&vcc_3v3_sys>;
+ buck5-supply = <&vcc_3v3_sys>;
+ ldo1-supply = <&vcc_3v3_sys>;
+ ldo2-supply = <&vcc_3v3_sys>;
+ ldo3-supply = <&buck5>;
+ ldo4-supply = <&vcc_3v3_sys>;
+
+ regulators {
+ buck123: buck123 {
+ regulator-name = "vcc_core";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck4: buck4 {
+ regulator-name = "vcc_1v1";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck5: buck5 {
+ regulator-name = "vcc_1v8_sys";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1: ldo1 {
+ regulator-name = "vddshv5_sdio";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo2: ldo2 {
+ regulator-name = "vpp_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo3: ldo3 {
+ regulator-name = "vcc_0v85";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo4: ldo4 {
+ regulator-name = "vdda_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml b/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml
index f7f0f2c0421a..9ad55746133b 100644
--- a/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml
+++ b/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml
@@ -90,6 +90,7 @@ properties:
oneOf:
- enum:
- x-powers,axp152
+ - x-powers,axp192
- x-powers,axp202
- x-powers,axp209
- x-powers,axp221
diff --git a/Documentation/devicetree/bindings/mips/ralink.yaml b/Documentation/devicetree/bindings/mips/ralink.yaml
index 704b5b595127..53c1f6635377 100644
--- a/Documentation/devicetree/bindings/mips/ralink.yaml
+++ b/Documentation/devicetree/bindings/mips/ralink.yaml
@@ -80,6 +80,7 @@ properties:
- enum:
- gnubee,gb-pc1
- gnubee,gb-pc2
+ - tplink,hc220-g5-v1
- const: mediatek,mt7621-soc
additionalProperties: true
diff --git a/Documentation/devicetree/bindings/misc/brcm,kona-smc.txt b/Documentation/devicetree/bindings/misc/brcm,kona-smc.txt
deleted file mode 100644
index 05b47232ed9e..000000000000
--- a/Documentation/devicetree/bindings/misc/brcm,kona-smc.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-Broadcom Secure Monitor Bounce buffer
------------------------------------------------------
-This binding defines the location of the bounce buffer
-used for non-secure to secure communications.
-
-Required properties:
-- compatible : "brcm,kona-smc"
-- DEPRECATED: compatible : "bcm,kona-smc"
-- reg : Location and size of bounce buffer
-
-Example:
- smc@3404c000 {
- compatible = "brcm,bcm11351-smc", "brcm,kona-smc";
- reg = <0x3404c000 0x400>; //1 KiB in SRAM
- };
diff --git a/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml b/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml
index 1ab9588cdd89..2dc3e245fa5d 100644
--- a/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml
+++ b/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml
@@ -36,7 +36,7 @@ properties:
description:
A list of channels tied to this function, used for matching
the function to a set of virtual channels.
- $ref: "/schemas/types.yaml#/definitions/string-array"
+ $ref: /schemas/types.yaml#/definitions/string-array
items:
- const: fastrpcglink-apps-dsp
@@ -48,14 +48,14 @@ properties:
qcom,smd-channels:
description:
Channel name used for the RPM communication
- $ref: "/schemas/types.yaml#/definitions/string-array"
+ $ref: /schemas/types.yaml#/definitions/string-array
items:
- const: fastrpcsmd-apps-dsp
qcom,vmids:
description:
Virtual machine IDs for remote processor.
- $ref: "/schemas/types.yaml#/definitions/uint32-array"
+ $ref: /schemas/types.yaml#/definitions/uint32-array
"#address-cells":
const: 1
diff --git a/Documentation/devicetree/bindings/misc/ti,j721e-esm.yaml b/Documentation/devicetree/bindings/misc/ti,j721e-esm.yaml
new file mode 100644
index 000000000000..0c9a8444844c
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/ti,j721e-esm.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/ti,j721e-esm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments K3 ESM
+
+maintainers:
+ - Neha Malcom Francis <n-francis@ti.com>
+
+description:
+ The ESM (Error Signaling Module) is an IP block on TI K3 devices
+ that allows handling of safety events somewhat similar to what interrupt
+ controller would do. The safety signals have their separate paths within
+ the SoC, and they are handled by the ESM, which routes them to the proper
+ destination, which can be system reset, interrupt controller, etc. In the
+ simplest configuration the signals are just routed to reset the SoC.
+
+properties:
+ compatible:
+ const: ti,j721e-esm
+
+ reg:
+ maxItems: 1
+
+ ti,esm-pins:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description:
+ integer array of ESM interrupt pins to route to external event pin
+ which can be used to reset the SoC.
+ minItems: 1
+ maxItems: 255
+
+required:
+ - compatible
+ - reg
+ - ti,esm-pins
+
+additionalProperties: false
+
+examples:
+ - |
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ esm@700000 {
+ compatible = "ti,j721e-esm";
+ reg = <0x0 0x700000 0x0 0x1000>;
+ ti,esm-pins = <344>, <345>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
index 1c96da04f0e5..2459a55ed540 100644
--- a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
+++ b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
@@ -53,10 +53,11 @@ properties:
items:
- const: arm,pl18x
- const: arm,primecell
- - description: Entry for STMicroelectronics variant of PL18x.
- This dedicated compatible is used by bootloaders.
+ - description: Entries for STMicroelectronics variant of PL18x.
items:
- - const: st,stm32-sdmmc2
+ - enum:
+ - st,stm32-sdmmc2
+ - st,stm32mp25-sdmmc2
- const: arm,pl18x
- const: arm,primecell
diff --git a/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.txt b/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.txt
deleted file mode 100644
index d876580ae3b8..000000000000
--- a/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Broadcom BCM2835 SDHOST controller
-
-This file documents differences between the core properties described
-by mmc.txt and the properties that represent the BCM2835 controller.
-
-Required properties:
-- compatible: Should be "brcm,bcm2835-sdhost".
-- clocks: The clock feeding the SDHOST controller.
-
-Optional properties:
-- dmas: DMA channel for read and write.
- See Documentation/devicetree/bindings/dma/dma.txt for details
-
-Example:
-
-sdhost: mmc@7e202000 {
- compatible = "brcm,bcm2835-sdhost";
- reg = <0x7e202000 0x100>;
- interrupts = <2 24>;
- clocks = <&clocks BCM2835_CLOCK_VPU>;
- dmas = <&dma 13>;
- dma-names = "rx-tx";
-};
diff --git a/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.yaml b/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.yaml
new file mode 100644
index 000000000000..3a5a44800675
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/brcm,bcm2835-sdhost.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM2835 SDHOST controller
+
+maintainers:
+ - Stefan Wahren <stefan.wahren@i2se.com>
+
+allOf:
+ - $ref: mmc-controller.yaml
+
+properties:
+ compatible:
+ const: brcm,bcm2835-sdhost
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ dmas:
+ maxItems: 1
+
+ dma-names:
+ const: rx-tx
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/bcm2835.h>
+
+ sdhost: mmc@7e202000 {
+ compatible = "brcm,bcm2835-sdhost";
+ reg = <0x7e202000 0x100>;
+ interrupts = <2 24>;
+ clocks = <&clocks BCM2835_CLOCK_VPU>;
+ dmas = <&dma 13>;
+ dma-names = "rx-tx";
+ bus-width = <4>;
+ };
diff --git a/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.txt b/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.txt
deleted file mode 100644
index 7f5dd83f5bd9..000000000000
--- a/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Broadcom BCM281xx SDHCI
-
-This file documents differences between the core properties in mmc.txt
-and the properties present in the bcm281xx SDHCI
-
-Required properties:
-- compatible : Should be "brcm,kona-sdhci"
-- DEPRECATED: compatible : Should be "bcm,kona-sdhci"
-- clocks: phandle + clock specifier pair of the external clock
-
-Refer to clocks/clock-bindings.txt for generic clock consumer properties.
-
-Example:
-
-sdio2: sdio@3f1a0000 {
- compatible = "brcm,kona-sdhci";
- reg = <0x3f1a0000 0x10000>;
- clocks = <&sdio3_clk>;
- interrupts = <0x0 74 0x4>;
-};
-
diff --git a/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.yaml b/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.yaml
new file mode 100644
index 000000000000..12eb3988f824
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/brcm,kona-sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Kona family SDHCI controller
+
+maintainers:
+ - Florian Fainelli <f.fainelli@gmail.com>
+
+allOf:
+ - $ref: sdhci-common.yaml#
+
+properties:
+ compatible:
+ const: brcm,kona-sdhci
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - interrupts
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/clock/bcm281xx.h>
+
+ mmc@3f1a0000 {
+ compatible = "brcm,kona-sdhci";
+ reg = <0x3f1a0000 0x10000>;
+ clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO3>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
index fbfd822b9270..82eb7a24c857 100644
--- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
+++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
@@ -42,6 +42,7 @@ properties:
- enum:
- fsl,imx6sll-usdhc
- fsl,imx6ull-usdhc
+ - fsl,imx6ul-usdhc
- const: fsl,imx6sx-usdhc
- items:
- const: fsl,imx7d-usdhc
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
index 4f2d9e8127dd..6da28e630577 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
+++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
@@ -36,11 +36,14 @@ properties:
- enum:
- qcom,ipq5018-sdhci
- qcom,ipq5332-sdhci
+ - qcom,ipq6018-sdhci
- qcom,ipq9574-sdhci
- qcom,qcm2290-sdhci
- qcom,qcs404-sdhci
+ - qcom,qdu1000-sdhci
- qcom,sc7180-sdhci
- qcom,sc7280-sdhci
+ - qcom,sc8280xp-sdhci
- qcom,sdm630-sdhci
- qcom,sdm670-sdhci
- qcom,sdm845-sdhci
diff --git a/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml b/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml
index 9a88870cd865..054b6b8bf9b9 100644
--- a/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml
+++ b/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml
@@ -49,13 +49,12 @@ properties:
patternProperties:
"^nand@[a-f0-9]$":
type: object
+ $ref: raw-nand-chip.yaml
properties:
reg:
minimum: 0
maximum: 7
- nand-ecc-mode: true
-
nand-ecc-algo:
const: bch
@@ -75,7 +74,7 @@ patternProperties:
minimum: 0
maximum: 1
- additionalProperties: false
+ unevaluatedProperties: false
required:
- compatible
diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
index 28fb9a7dd70f..787ef488dd5b 100644
--- a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
+++ b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
@@ -40,6 +40,7 @@ properties:
patternProperties:
"^nand@[0-7]$":
type: object
+ $ref: raw-nand-chip.yaml
properties:
reg:
minimum: 0
@@ -58,6 +59,14 @@ patternProperties:
meson-gxl-nfc 8, 16, 24, 30, 40, 50, 60
meson-axg-nfc 8
+ nand-rb:
+ maxItems: 1
+ items:
+ maximum: 0
+
+ unevaluatedProperties: false
+
+
required:
- compatible
- reg
@@ -87,6 +96,7 @@ examples:
nand@0 {
reg = <0>;
+ nand-rb = <0>;
};
};
diff --git a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml
index 1571024aa119..f57e96374e67 100644
--- a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml
+++ b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml
@@ -114,6 +114,7 @@ properties:
patternProperties:
"^nand@[a-f0-9]$":
type: object
+ $ref: raw-nand-chip.yaml
properties:
compatible:
const: brcm,nandcs
@@ -136,6 +137,8 @@ patternProperties:
layout.
$ref: /schemas/types.yaml#/definitions/uint32
+ unevaluatedProperties: false
+
allOf:
- $ref: nand-controller.yaml#
- if:
diff --git a/Documentation/devicetree/bindings/mtd/denali,nand.yaml b/Documentation/devicetree/bindings/mtd/denali,nand.yaml
index 0be83ad42970..81f95538d415 100644
--- a/Documentation/devicetree/bindings/mtd/denali,nand.yaml
+++ b/Documentation/devicetree/bindings/mtd/denali,nand.yaml
@@ -63,6 +63,12 @@ properties:
minItems: 1
maxItems: 2
+patternProperties:
+ "^nand@[a-f0-9]$":
+ type: object
+ $ref: raw-nand-chip.yaml
+ unevaluatedProperties: false
+
allOf:
- $ref: nand-controller.yaml
@@ -74,7 +80,6 @@ allOf:
then:
patternProperties:
"^nand@[a-f0-9]$":
- type: object
properties:
nand-ecc-strength:
enum:
@@ -92,7 +97,6 @@ allOf:
then:
patternProperties:
"^nand@[a-f0-9]$":
- type: object
properties:
nand-ecc-strength:
enum:
@@ -111,7 +115,6 @@ allOf:
then:
patternProperties:
"^nand@[a-f0-9]$":
- type: object
properties:
nand-ecc-strength:
enum:
diff --git a/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml b/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml
index a7bdb5d3675c..b9312ebefeb9 100644
--- a/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml
+++ b/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml
@@ -39,7 +39,9 @@ properties:
patternProperties:
"^nand@[a-f0-9]$":
type: object
+ $ref: raw-nand-chip.yaml
properties:
+
rb-gpios:
description: GPIO specifier for the busy pin.
maxItems: 1
@@ -48,6 +50,8 @@ patternProperties:
description: GPIO specifier for the write-protect pin.
maxItems: 1
+ unevaluatedProperties: false
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/mtd/intel,lgm-ebunand.yaml b/Documentation/devicetree/bindings/mtd/intel,lgm-ebunand.yaml
index cc3def758e00..07bc7e3efd3a 100644
--- a/Documentation/devicetree/bindings/mtd/intel,lgm-ebunand.yaml
+++ b/Documentation/devicetree/bindings/mtd/intel,lgm-ebunand.yaml
@@ -42,17 +42,16 @@ properties:
patternProperties:
"^nand@[a-f0-9]$":
type: object
+ $ref: raw-nand-chip.yaml
properties:
reg:
minimum: 0
maximum: 1
- nand-ecc-mode: true
-
nand-ecc-algo:
const: hw
- additionalProperties: false
+ unevaluatedProperties: false
required:
- compatible
diff --git a/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml b/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml
new file mode 100644
index 000000000000..a10729bb1840
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml
@@ -0,0 +1,226 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/marvell,nand-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell NAND Flash Controller (NFC)
+
+maintainers:
+ - Miquel Raynal <miquel.raynal@bootlin.com>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: marvell,armada-8k-nand-controller
+ - const: marvell,armada370-nand-controller
+ - enum:
+ - marvell,armada370-nand-controller
+ - marvell,pxa3xx-nand-controller
+ - description: legacy bindings
+ deprecated: true
+ enum:
+ - marvell,armada-8k-nand
+ - marvell,armada370-nand
+ - marvell,pxa3xx-nand
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ description:
+ Shall reference the NAND controller clocks, the second one is
+ is only needed for the Armada 7K/8K SoCs
+ minItems: 1
+ maxItems: 2
+
+ clock-names:
+ minItems: 1
+ items:
+ - const: core
+ - const: reg
+
+ dmas:
+ maxItems: 1
+
+ dma-names:
+ items:
+ - const: data
+
+ marvell,system-controller:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: Syscon node that handles NAND controller related registers
+
+patternProperties:
+ "^nand@[a-f0-9]$":
+ type: object
+ $ref: raw-nand-chip.yaml
+
+ properties:
+ reg:
+ minimum: 0
+ maximum: 3
+
+ nand-rb:
+ items:
+ - minimum: 0
+ maximum: 1
+
+ nand-ecc-step-size:
+ const: 512
+
+ nand-ecc-strength:
+ enum: [1, 4, 8, 12, 16]
+
+ nand-ecc-mode:
+ const: hw
+
+ marvell,nand-keep-config:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Orders the driver not to take the timings from the core and
+ leaving them completely untouched. Bootloader timings will then
+ be used.
+
+ marvell,nand-enable-arbiter:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ To enable the arbiter, all boards blindly used it,
+ this bit was set by the bootloader for many boards and even if
+ it is marked reserved in several datasheets, it might be needed to set
+ it (otherwise it is harmless).
+ deprecated: true
+
+ required:
+ - reg
+ - nand-rb
+
+ unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+allOf:
+ - $ref: nand-controller.yaml#
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: marvell,pxa3xx-nand-controller
+ then:
+ required:
+ - dmas
+ - dma-names
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: marvell,armada-8k-nand-controller
+ then:
+ properties:
+ clocks:
+ minItems: 2
+
+ clock-names:
+ minItems: 2
+
+ required:
+ - marvell,system-controller
+
+ else:
+ properties:
+ clocks:
+ minItems: 1
+
+ clock-names:
+ minItems: 1
+
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ nand_controller: nand-controller@d0000 {
+ compatible = "marvell,armada370-nand-controller";
+ reg = <0xd0000 0x54>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&coredivclk 0>;
+
+ nand@0 {
+ reg = <0>;
+ label = "main-storage";
+ nand-rb = <0>;
+ nand-ecc-mode = "hw";
+ marvell,nand-keep-config;
+ nand-on-flash-bbt;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "Rootfs";
+ reg = <0x00000000 0x40000000>;
+ };
+ };
+ };
+ };
+
+ - |
+ cp0_nand_controller: nand-controller@720000 {
+ compatible = "marvell,armada-8k-nand-controller",
+ "marvell,armada370-nand-controller";
+ reg = <0x720000 0x54>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <115 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "core", "reg";
+ clocks = <&cp0_clk 1 2>,
+ <&cp0_clk 1 17>;
+ marvell,system-controller = <&cp0_syscon0>;
+
+ nand@0 {
+ reg = <0>;
+ label = "main-storage";
+ nand-rb = <0>;
+ nand-ecc-mode = "hw";
+ nand-ecc-strength = <8>;
+ nand-ecc-step-size = <512>;
+ };
+ };
+
+ - |
+ nand-controller@43100000 {
+ compatible = "marvell,pxa3xx-nand-controller";
+ reg = <0x43100000 90>;
+ interrupts = <45>;
+ clocks = <&clks 1>;
+ clock-names = "core";
+ dmas = <&pdma 97 3>;
+ dma-names = "data";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ nand@0 {
+ reg = <0>;
+ nand-rb = <0>;
+ nand-ecc-mode = "hw";
+ marvell,nand-keep-config;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/mtd/marvell-nand.txt b/Documentation/devicetree/bindings/mtd/marvell-nand.txt
deleted file mode 100644
index a2d9a0f2b683..000000000000
--- a/Documentation/devicetree/bindings/mtd/marvell-nand.txt
+++ /dev/null
@@ -1,126 +0,0 @@
-Marvell NAND Flash Controller (NFC)
-
-Required properties:
-- compatible: can be one of the following:
- * "marvell,armada-8k-nand-controller"
- * "marvell,armada370-nand-controller"
- * "marvell,pxa3xx-nand-controller"
- * "marvell,armada-8k-nand" (deprecated)
- * "marvell,armada370-nand" (deprecated)
- * "marvell,pxa3xx-nand" (deprecated)
- Compatibles marked deprecated support only the old bindings described
- at the bottom.
-- reg: NAND flash controller memory area.
-- #address-cells: shall be set to 1. Encode the NAND CS.
-- #size-cells: shall be set to 0.
-- interrupts: shall define the NAND controller interrupt.
-- clocks: shall reference the NAND controller clocks, the second one is
- is only needed for the Armada 7K/8K SoCs
-- clock-names: mandatory if there is a second clock, in this case there
- should be one clock named "core" and another one named "reg"
-- marvell,system-controller: Set to retrieve the syscon node that handles
- NAND controller related registers (only required with the
- "marvell,armada-8k-nand[-controller]" compatibles).
-
-Optional properties:
-- label: see partition.txt. New platforms shall omit this property.
-- dmas: shall reference DMA channel associated to the NAND controller.
- This property is only used with "marvell,pxa3xx-nand[-controller]"
- compatible strings.
-- dma-names: shall be "rxtx".
- This property is only used with "marvell,pxa3xx-nand[-controller]"
- compatible strings.
-
-Optional children nodes:
-Children nodes represent the available NAND chips.
-
-Required properties:
-- reg: shall contain the native Chip Select ids (0-3).
-- nand-rb: see nand-controller.yaml (0-1).
-
-Optional properties:
-- marvell,nand-keep-config: orders the driver not to take the timings
- from the core and leaving them completely untouched. Bootloader
- timings will then be used.
-- label: MTD name.
-- nand-on-flash-bbt: see nand-controller.yaml.
-- nand-ecc-mode: see nand-controller.yaml. Will use hardware ECC if not specified.
-- nand-ecc-algo: see nand-controller.yaml. This property is essentially useful when
- not using hardware ECC. Howerver, it may be added when using hardware
- ECC for clarification but will be ignored by the driver because ECC
- mode is chosen depending on the page size and the strength required by
- the NAND chip. This value may be overwritten with nand-ecc-strength
- property.
-- nand-ecc-strength: see nand-controller.yaml.
-- nand-ecc-step-size: see nand-controller.yaml. Marvell's NAND flash controller does
- use fixed strength (1-bit for Hamming, 16-bit for BCH), so the actual
- step size will shrink or grow in order to fit the required strength.
- Step sizes are not completely random for all and follow certain
- patterns described in AN-379, "Marvell SoC NFC ECC".
-
-See Documentation/devicetree/bindings/mtd/nand-controller.yaml for more details on
-generic bindings.
-
-
-Example:
-nand_controller: nand-controller@d0000 {
- compatible = "marvell,armada370-nand-controller";
- reg = <0xd0000 0x54>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&coredivclk 0>;
-
- nand@0 {
- reg = <0>;
- label = "main-storage";
- nand-rb = <0>;
- nand-ecc-mode = "hw";
- marvell,nand-keep-config;
- nand-on-flash-bbt;
- nand-ecc-strength = <4>;
- nand-ecc-step-size = <512>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "Rootfs";
- reg = <0x00000000 0x40000000>;
- };
- };
- };
-};
-
-
-Note on legacy bindings: One can find, in not-updated device trees,
-bindings slightly different than described above with other properties
-described below as well as the partitions node at the root of a so
-called "nand" node (without clear controller/chip separation).
-
-Legacy properties:
-- marvell,nand-enable-arbiter: To enable the arbiter, all boards blindly
- used it, this bit was set by the bootloader for many boards and even if
- it is marked reserved in several datasheets, it might be needed to set
- it (otherwise it is harmless) so whether or not this property is set,
- the bit is selected by the driver.
-- num-cs: Number of chip-select lines to use, all boards blindly set 1
- to this and for a reason, other values would have failed. The value of
- this property is ignored.
-
-Example:
-
- nand0: nand@43100000 {
- compatible = "marvell,pxa3xx-nand";
- reg = <0x43100000 90>;
- interrupts = <45>;
- dmas = <&pdma 97 0>;
- dma-names = "rxtx";
- #address-cells = <1>;
- marvell,nand-keep-config;
- marvell,nand-enable-arbiter;
- num-cs = <1>;
- /* Partitions (optional) */
- };
diff --git a/Documentation/devicetree/bindings/mtd/mediatek,mtk-nfc.yaml b/Documentation/devicetree/bindings/mtd/mediatek,mtk-nfc.yaml
index a6e7f123eda7..ab503a33a269 100644
--- a/Documentation/devicetree/bindings/mtd/mediatek,mtk-nfc.yaml
+++ b/Documentation/devicetree/bindings/mtd/mediatek,mtk-nfc.yaml
@@ -40,12 +40,11 @@ properties:
patternProperties:
"^nand@[a-f0-9]$":
- $ref: nand-chip.yaml#
+ $ref: raw-nand-chip.yaml#
unevaluatedProperties: false
properties:
reg:
maximum: 1
- nand-on-flash-bbt: true
nand-ecc-mode:
const: hw
diff --git a/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml b/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml
index f8c976898a95..18f6733408b4 100644
--- a/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml
+++ b/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml
@@ -164,7 +164,7 @@ examples:
reg = <0 0xf80000>;
};
firmware@f80000 {
- label ="firmware";
+ label = "firmware";
reg = <0xf80000 0x80000>;
read-only;
};
diff --git a/Documentation/devicetree/bindings/mtd/mtd.yaml b/Documentation/devicetree/bindings/mtd/mtd.yaml
index da3d488c335f..b82ca03e969c 100644
--- a/Documentation/devicetree/bindings/mtd/mtd.yaml
+++ b/Documentation/devicetree/bindings/mtd/mtd.yaml
@@ -12,7 +12,7 @@ maintainers:
properties:
$nodename:
- pattern: "^(flash|.*sram)(@.*)?$"
+ pattern: "^(flash|.*sram|nand)(@.*)?$"
label:
description:
diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
index f70a32d2d9d4..83a4fe4cc29d 100644
--- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml
+++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
@@ -16,16 +16,6 @@ description: |
children nodes of the NAND controller. This representation should be
enforced even for simple controllers supporting only one chip.
- The ECC strength and ECC step size properties define the user
- desires in terms of correction capability of a controller. Together,
- they request the ECC engine to correct {strength} bit errors per
- {size} bytes.
-
- The interpretation of these parameters is implementation-defined, so
- not all implementations must support all possible
- combinations. However, implementations are encouraged to further
- specify the value(s) they support.
-
properties:
$nodename:
pattern: "^nand-controller(@.*)?"
@@ -51,79 +41,8 @@ properties:
patternProperties:
"^nand@[a-f0-9]$":
- $ref: nand-chip.yaml#
-
- properties:
- reg:
- description:
- Contains the chip-select IDs.
-
- nand-ecc-placement:
- description:
- Location of the ECC bytes. This location is unknown by default
- but can be explicitly set to "oob", if all ECC bytes are
- known to be stored in the OOB area, or "interleaved" if ECC
- bytes will be interleaved with regular data in the main area.
- $ref: /schemas/types.yaml#/definitions/string
- enum: [ oob, interleaved ]
-
- nand-bus-width:
- description:
- Bus width to the NAND chip
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [8, 16]
- default: 8
-
- nand-on-flash-bbt:
- description:
- With this property, the OS will search the device for a Bad
- Block Table (BBT). If not found, it will create one, reserve
- a few blocks at the end of the device to store it and update
- it as the device ages. Otherwise, the out-of-band area of a
- few pages of all the blocks will be scanned at boot time to
- find Bad Block Markers (BBM). These markers will help to
- build a volatile BBT in RAM.
- $ref: /schemas/types.yaml#/definitions/flag
-
- nand-ecc-maximize:
- description:
- Whether or not the ECC strength should be maximized. The
- maximum ECC strength is both controller and chip
- dependent. The ECC engine has to select the ECC config
- providing the best strength and taking the OOB area size
- constraint into account. This is particularly useful when
- only the in-band area is used by the upper layers, and you
- want to make your NAND as reliable as possible.
- $ref: /schemas/types.yaml#/definitions/flag
-
- nand-is-boot-medium:
- description:
- Whether or not the NAND chip is a boot medium. Drivers might
- use this information to select ECC algorithms supported by
- the boot ROM or similar restrictions.
- $ref: /schemas/types.yaml#/definitions/flag
-
- nand-rb:
- description:
- Contains the native Ready/Busy IDs.
- $ref: /schemas/types.yaml#/definitions/uint32-array
-
- rb-gpios:
- description:
- Contains one or more GPIO descriptor (the numper of descriptor
- depends on the number of R/B pins exposed by the flash) for the
- Ready/Busy pins. Active state refers to the NAND ready state and
- should be set to GPIOD_ACTIVE_HIGH unless the signal is inverted.
-
- wp-gpios:
- description:
- Contains one GPIO descriptor for the Write Protect pin.
- Active state refers to the NAND Write Protect state and should be
- set to GPIOD_ACTIVE_LOW unless the signal is inverted.
- maxItems: 1
-
- required:
- - reg
+ type: object
+ $ref: raw-nand-chip.yaml#
required:
- "#address-cells"
diff --git a/Documentation/devicetree/bindings/mtd/partitions/partition.yaml b/Documentation/devicetree/bindings/mtd/partitions/partition.yaml
index cdffbb9cedc2..1ebe9e2347ea 100644
--- a/Documentation/devicetree/bindings/mtd/partitions/partition.yaml
+++ b/Documentation/devicetree/bindings/mtd/partitions/partition.yaml
@@ -55,6 +55,7 @@ properties:
linux,rootfs:
description: Marks partition that contains root filesystem to mount and boot
user space from
+ type: boolean
if:
not:
diff --git a/Documentation/devicetree/bindings/mtd/partitions/partitions.yaml b/Documentation/devicetree/bindings/mtd/partitions/partitions.yaml
index 2edc65e0e361..1dda2c80747b 100644
--- a/Documentation/devicetree/bindings/mtd/partitions/partitions.yaml
+++ b/Documentation/devicetree/bindings/mtd/partitions/partitions.yaml
@@ -21,6 +21,7 @@ oneOf:
- $ref: linksys,ns-partitions.yaml
- $ref: qcom,smem-part.yaml
- $ref: redboot-fis.yaml
+ - $ref: tplink,safeloader-partitions.yaml
properties:
compatible: true
diff --git a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
index 00c991ffa6c4..4ada60fbf81d 100644
--- a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
+++ b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
@@ -34,7 +34,9 @@ properties:
patternProperties:
"^nand@[a-f0-9]$":
type: object
+ $ref: raw-nand-chip.yaml
properties:
+
nand-bus-width:
const: 8
@@ -45,6 +47,24 @@ patternProperties:
enum:
- 512
+ qcom,boot-partitions:
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ items:
+ items:
+ - description: offset
+ - description: size
+ description:
+ Boot partition use a different layout where the 4 bytes of spare
+ data are not protected by ECC. Use this to declare these special
+ partitions by defining first the offset and then the size.
+
+ It's in the form of <offset1 size1 offset2 size2 offset3 ...>
+ and should be declared in ascending order.
+
+ Refer to the ipq8064 example on how to use this special binding.
+
+ unevaluatedProperties: false
+
allOf:
- $ref: nand-controller.yaml#
@@ -107,22 +127,15 @@ allOf:
- qcom,ipq806x-nand
then:
- properties:
- qcom,boot-partitions:
- $ref: /schemas/types.yaml#/definitions/uint32-matrix
- items:
- items:
- - description: offset
- - description: size
- description:
- Boot partition use a different layout where the 4 bytes of spare
- data are not protected by ECC. Use this to declare these special
- partitions by defining first the offset and then the size.
-
- It's in the form of <offset1 size1 offset2 size2 offset3 ...>
- and should be declared in ascending order.
-
- Refer to the ipq8064 example on how to use this special binding.
+ patternProperties:
+ "^nand@[a-f0-9]$":
+ properties:
+ qcom,boot-partitions: true
+ else:
+ patternProperties:
+ "^nand@[a-f0-9]$":
+ properties:
+ qcom,boot-partitions: false
required:
- compatible
diff --git a/Documentation/devicetree/bindings/mtd/raw-nand-chip.yaml b/Documentation/devicetree/bindings/mtd/raw-nand-chip.yaml
new file mode 100644
index 000000000000..092448d7bfc5
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/raw-nand-chip.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/raw-nand-chip.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Raw NAND Chip Common Properties
+
+maintainers:
+ - Miquel Raynal <miquel.raynal@bootlin.com>
+
+allOf:
+ - $ref: nand-chip.yaml#
+
+description: |
+ The ECC strength and ECC step size properties define the user
+ desires in terms of correction capability of a controller. Together,
+ they request the ECC engine to correct {strength} bit errors per
+ {size} bytes for a particular raw NAND chip.
+
+ The interpretation of these parameters is implementation-defined, so
+ not all implementations must support all possible
+ combinations. However, implementations are encouraged to further
+ specify the value(s) they support.
+
+properties:
+ $nodename:
+ pattern: "^nand@[a-f0-9]$"
+
+ reg:
+ description:
+ Contains the chip-select IDs.
+
+ nand-ecc-placement:
+ description:
+ Location of the ECC bytes. This location is unknown by default
+ but can be explicitly set to "oob", if all ECC bytes are
+ known to be stored in the OOB area, or "interleaved" if ECC
+ bytes will be interleaved with regular data in the main area.
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [ oob, interleaved ]
+ deprecated: true
+
+ nand-ecc-mode:
+ description:
+ Legacy ECC configuration mixing the ECC engine choice and
+ configuration.
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [none, soft, soft_bch, hw, hw_syndrome, on-die]
+ deprecated: true
+
+ nand-bus-width:
+ description:
+ Bus width to the NAND chip
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [8, 16]
+ default: 8
+
+ nand-on-flash-bbt:
+ description:
+ With this property, the OS will search the device for a Bad
+ Block Table (BBT). If not found, it will create one, reserve
+ a few blocks at the end of the device to store it and update
+ it as the device ages. Otherwise, the out-of-band area of a
+ few pages of all the blocks will be scanned at boot time to
+ find Bad Block Markers (BBM). These markers will help to
+ build a volatile BBT in RAM.
+ $ref: /schemas/types.yaml#/definitions/flag
+
+ nand-ecc-maximize:
+ description:
+ Whether or not the ECC strength should be maximized. The
+ maximum ECC strength is both controller and chip
+ dependent. The ECC engine has to select the ECC config
+ providing the best strength and taking the OOB area size
+ constraint into account. This is particularly useful when
+ only the in-band area is used by the upper layers, and you
+ want to make your NAND as reliable as possible.
+ $ref: /schemas/types.yaml#/definitions/flag
+
+ nand-is-boot-medium:
+ description:
+ Whether or not the NAND chip is a boot medium. Drivers might
+ use this information to select ECC algorithms supported by
+ the boot ROM or similar restrictions.
+ $ref: /schemas/types.yaml#/definitions/flag
+
+ nand-rb:
+ description:
+ Contains the native Ready/Busy IDs.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+
+ rb-gpios:
+ description:
+ Contains one or more GPIO descriptor (the numper of descriptor
+ depends on the number of R/B pins exposed by the flash) for the
+ Ready/Busy pins. Active state refers to the NAND ready state and
+ should be set to GPIOD_ACTIVE_HIGH unless the signal is inverted.
+
+ wp-gpios:
+ description:
+ Contains one GPIO descriptor for the Write Protect pin.
+ Active state refers to the NAND Write Protect state and should be
+ set to GPIOD_ACTIVE_LOW unless the signal is inverted.
+ maxItems: 1
+
+required:
+ - reg
+
+# This is a generic file other binding inherit from and extend
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml b/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml
index 7eb1d0a38565..ee53715ffdca 100644
--- a/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml
+++ b/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml
@@ -57,6 +57,7 @@ properties:
patternProperties:
"^nand@[0-7]$":
type: object
+ $ref: raw-nand-chip.yaml
properties:
reg:
minimum: 0
@@ -116,6 +117,8 @@ patternProperties:
Only used in combination with 'nand-is-boot-medium'.
+ unevaluatedProperties: false
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml b/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml
index 986e85ccebc7..e72cb5bacaf0 100644
--- a/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml
+++ b/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml
@@ -37,6 +37,7 @@ properties:
patternProperties:
"^nand@[a-f0-9]$":
type: object
+ $ref: raw-nand-chip.yaml
properties:
nand-ecc-step-size:
const: 512
@@ -44,6 +45,8 @@ patternProperties:
nand-ecc-strength:
enum: [1, 4, 8]
+ unevaluatedProperties: false
+
allOf:
- $ref: nand-controller.yaml#
diff --git a/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.yaml b/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.yaml
index 4774c92e7fc4..df4fdc02456d 100644
--- a/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.yaml
+++ b/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.yaml
@@ -30,6 +30,8 @@ properties:
patternProperties:
"^flash@[0-1],[0-9a-f]+$":
type: object
+ $ref: mtd-physmap.yaml
+ unevaluatedProperties: false
required:
- compatible
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml
index 3bd912ed7c7e..23e92be33ac8 100644
--- a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml
+++ b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Allwinner A20 GMAC
allOf:
- - $ref: "snps,dwmac.yaml#"
+ - $ref: snps,dwmac.yaml#
maintainers:
- Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
index 47bc2057e629..4bfac9186886 100644
--- a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
+++ b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
@@ -63,7 +63,7 @@ required:
- syscon
allOf:
- - $ref: "snps,dwmac.yaml#"
+ - $ref: snps,dwmac.yaml#
- if:
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/net/altr,tse.yaml b/Documentation/devicetree/bindings/net/altr,tse.yaml
index 9d02af468906..f5d3b70af07a 100644
--- a/Documentation/devicetree/bindings/net/altr,tse.yaml
+++ b/Documentation/devicetree/bindings/net/altr,tse.yaml
@@ -72,8 +72,8 @@ allOf:
compatible:
contains:
enum:
- - const: altr,tse-1.0
- - const: ALTR,tse-1.0
+ - altr,tse-1.0
+ - ALTR,tse-1.0
then:
properties:
reg:
diff --git a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
index a2c51a84efa5..ee7a65b528cd 100644
--- a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
@@ -27,7 +27,7 @@ select:
- compatible
allOf:
- - $ref: "snps,dwmac.yaml#"
+ - $ref: snps,dwmac.yaml#
- if:
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml b/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml
index 57e4c87cb00b..f01a3988538c 100644
--- a/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml
+++ b/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml
@@ -24,11 +24,12 @@ properties:
- nxp,88w8997-bt
fw-init-baudrate:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 115200
description:
Chip baudrate after FW is downloaded and initialized.
This property depends on the module vendor's
- configuration. If this property is not specified,
- 115200 is set as default.
+ configuration.
required:
- compatible
diff --git a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml
index 68f78b90d23a..56cbb42b5aea 100644
--- a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml
+++ b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml
@@ -16,6 +16,7 @@ description:
properties:
compatible:
enum:
+ - qcom,qca2066-bt
- qcom,qca6174-bt
- qcom,qca9377-bt
- qcom,wcn3990-bt
@@ -50,6 +51,9 @@ properties:
vddch0-supply:
description: VDD_CH0 supply regulator handle
+ vddch1-supply:
+ description: VDD_CH1 supply regulator handle
+
vddaon-supply:
description: VDD_AON supply regulator handle
@@ -95,6 +99,7 @@ allOf:
compatible:
contains:
enum:
+ - qcom,qca2066-bt
- qcom,qca6174-bt
then:
required:
diff --git a/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml b/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml
index 0e5e5db32faf..7c90a4390531 100644
--- a/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml
+++ b/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml
@@ -55,7 +55,7 @@ properties:
patternProperties:
"^mdio@[0-9a-f]+$":
type: object
- $ref: "brcm,unimac-mdio.yaml"
+ $ref: brcm,unimac-mdio.yaml
description:
GENET internal UniMAC MDIO bus
diff --git a/Documentation/devicetree/bindings/net/cdns,macb.yaml b/Documentation/devicetree/bindings/net/cdns,macb.yaml
index bef5e0f895be..bf8894a0257e 100644
--- a/Documentation/devicetree/bindings/net/cdns,macb.yaml
+++ b/Documentation/devicetree/bindings/net/cdns,macb.yaml
@@ -109,6 +109,16 @@ properties:
power-domains:
maxItems: 1
+ cdns,rx-watermark:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ When the receive partial store and forward mode is activated,
+ the receiver will only begin to forward the packet to the external
+ AHB or AXI slave when enough packet data is stored in the SRAM packet buffer.
+ rx-watermark corresponds to the number of SRAM buffer locations,
+ that need to be filled, before the forwarding process is activated.
+ Width of the SRAM is platform dependent, and can be 4, 8 or 16 bytes.
+
'#address-cells':
const: 1
@@ -166,6 +176,7 @@ examples:
compatible = "cdns,macb";
reg = <0xfffc4000 0x4000>;
interrupts = <21>;
+ cdns,rx-watermark = <0x44>;
phy-mode = "rmii";
local-mac-address = [3a 0e 03 04 05 06];
clock-names = "pclk", "hclk", "tx_clk";
diff --git a/Documentation/devicetree/bindings/net/dsa/marvell.txt b/Documentation/devicetree/bindings/net/dsa/marvell.txt
index 2363b412410c..33726134f5c9 100644
--- a/Documentation/devicetree/bindings/net/dsa/marvell.txt
+++ b/Documentation/devicetree/bindings/net/dsa/marvell.txt
@@ -20,7 +20,7 @@ which is at a different MDIO base address in different switch families.
6171, 6172, 6175, 6176, 6185, 6240, 6320, 6321,
6341, 6350, 6351, 6352
- "marvell,mv88e6190" : Switch has base address 0x00. Use with models:
- 6190, 6190X, 6191, 6290, 6390, 6390X
+ 6163, 6190, 6190X, 6191, 6290, 6390, 6390X
- "marvell,mv88e6250" : Switch has base address 0x08 or 0x18. Use with model:
6220, 6250
diff --git a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml
index 9a64ed658745..4d5f5cc6d031 100644
--- a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml
@@ -12,10 +12,6 @@ description:
cs_sck_delay of 500ns. Ensuring that this SPI timing requirement is observed
depends on the SPI bus master driver.
-allOf:
- - $ref: dsa.yaml#/$defs/ethernet-ports
- - $ref: /schemas/spi/spi-peripheral-props.yaml#
-
maintainers:
- Vladimir Oltean <vladimir.oltean@nxp.com>
@@ -36,6 +32,9 @@ properties:
reg:
maxItems: 1
+ spi-cpha: true
+ spi-cpol: true
+
# Optional container node for the 2 internal MDIO buses of the SJA1110
# (one for the internal 100base-T1 PHYs and the other for the single
# 100base-TX PHY). The "reg" property does not have physical significance.
@@ -109,6 +108,30 @@ $defs:
1860, 1880, 1900, 1920, 1940, 1960, 1980, 2000, 2020, 2040, 2060, 2080,
2100, 2120, 2140, 2160, 2180, 2200, 2220, 2240, 2260]
+allOf:
+ - $ref: dsa.yaml#/$defs/ethernet-ports
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+ - if:
+ properties:
+ compatible:
+ enum:
+ - nxp,sja1105e
+ - nxp,sja1105p
+ - nxp,sja1105q
+ - nxp,sja1105r
+ - nxp,sja1105s
+ - nxp,sja1105t
+ then:
+ properties:
+ spi-cpol: false
+ required:
+ - spi-cpha
+ else:
+ properties:
+ spi-cpha: false
+ required:
+ - spi-cpol
+
unevaluatedProperties: false
examples:
@@ -120,6 +143,7 @@ examples:
ethernet-switch@1 {
reg = <0x1>;
compatible = "nxp,sja1105t";
+ spi-cpha;
ethernet-ports {
#address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
index 4f574532ee13..c1241c8a3b77 100644
--- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
@@ -93,6 +93,12 @@ properties:
the turn around line low at end of the control phase of the
MDIO transaction.
+ clocks:
+ maxItems: 1
+ description:
+ External clock connected to the PHY. If not specified it is assumed
+ that the PHY uses a fixed crystal or an internal oscillator.
+
enet-phy-lane-swap:
$ref: /schemas/types.yaml#/definitions/flag
description:
diff --git a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
index d23fa3771210..42a0bc94312c 100644
--- a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
+++ b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
@@ -19,7 +19,7 @@ select:
- compatible
allOf:
- - $ref: "snps,dwmac.yaml#"
+ - $ref: snps,dwmac.yaml#
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml b/Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml
index d71fa9de2b64..8a3713abd1ca 100644
--- a/Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml
+++ b/Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml
@@ -17,11 +17,12 @@ properties:
maxlinear,use-broken-interrupts:
description: |
Interrupts are broken on some GPY2xx PHYs in that they keep the
- interrupt line asserted even after the interrupt status register is
- cleared. Thus it is blocking the interrupt line which is usually bad
- for shared lines. By default interrupts are disabled for this PHY and
- polling mode is used. If one can live with the consequences, this
- property can be used to enable interrupt handling.
+ interrupt line asserted for a random amount of time even after the
+ interrupt status register is cleared. Thus it is blocking the
+ interrupt line which is usually bad for shared lines. By default,
+ interrupts are disabled for this PHY and polling mode is used. If one
+ can live with the consequences, this property can be used to enable
+ interrupt handling.
Affected PHYs (as far as known) are GPY215B and GPY215C.
type: boolean
diff --git a/Documentation/devicetree/bindings/net/mediatek,net.yaml b/Documentation/devicetree/bindings/net/mediatek,net.yaml
index acb2b2ac4fe1..31cc0c412805 100644
--- a/Documentation/devicetree/bindings/net/mediatek,net.yaml
+++ b/Documentation/devicetree/bindings/net/mediatek,net.yaml
@@ -293,7 +293,7 @@ allOf:
patternProperties:
"^mac@[0-1]$":
type: object
- additionalProperties: false
+ unevaluatedProperties: false
allOf:
- $ref: ethernet-controller.yaml#
description:
@@ -305,14 +305,9 @@ patternProperties:
reg:
maxItems: 1
- phy-handle: true
-
- phy-mode: true
-
required:
- reg
- compatible
- - phy-handle
required:
- compatible
diff --git a/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml
index 0fa2132fa4f4..5aa320c8af5a 100644
--- a/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml
@@ -25,7 +25,7 @@ select:
- compatible
allOf:
- - $ref: "snps,dwmac.yaml#"
+ - $ref: snps,dwmac.yaml#
properties:
compatible:
@@ -156,7 +156,7 @@ examples:
reg = <0x1101c000 0x1300>;
interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>;
interrupt-names = "macirq";
- phy-mode ="rgmii-rxid";
+ phy-mode = "rgmii-rxid";
mac-address = [00 55 7b b5 7d f7];
clock-names = "axi",
"apb",
diff --git a/Documentation/devicetree/bindings/net/micrel,ks8851.yaml b/Documentation/devicetree/bindings/net/micrel,ks8851.yaml
index b44d83554ef5..b726c6e14633 100644
--- a/Documentation/devicetree/bindings/net/micrel,ks8851.yaml
+++ b/Documentation/devicetree/bindings/net/micrel,ks8851.yaml
@@ -44,13 +44,13 @@ required:
allOf:
- $ref: ethernet-controller.yaml#
- - $ref: /schemas/memory-controllers/mc-peripheral-props.yaml#
- if:
properties:
compatible:
contains:
const: micrel,ks8851
then:
+ $ref: /schemas/spi/spi-peripheral-props.yaml#
properties:
reg:
maxItems: 1
@@ -60,6 +60,7 @@ allOf:
contains:
const: micrel,ks8851-mll
then:
+ $ref: /schemas/memory-controllers/mc-peripheral-props.yaml#
properties:
reg:
minItems: 2
diff --git a/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
index 63409cbff5ad..4c01cae7c93a 100644
--- a/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
+++ b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
@@ -24,7 +24,7 @@ select:
- compatible
allOf:
- - $ref: "snps,dwmac.yaml#"
+ - $ref: snps,dwmac.yaml#
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml b/Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml
index b110abb42597..2d382faca0e6 100644
--- a/Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml
+++ b/Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml
@@ -16,7 +16,7 @@ maintainers:
properties:
$nodename:
- pattern: "^ethernet-pse(@.*)?$"
+ pattern: "^ethernet-pse(@.*|-([0-9]|[1-9][0-9]+))?$"
"#pse-cells":
description:
diff --git a/Documentation/devicetree/bindings/net/qcom,ethqos.yaml b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml
index 60a38044fb19..7bdb412a0185 100644
--- a/Documentation/devicetree/bindings/net/qcom,ethqos.yaml
+++ b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml
@@ -20,6 +20,7 @@ properties:
compatible:
enum:
- qcom,qcs404-ethqos
+ - qcom,sa8775p-ethqos
- qcom,sc8280xp-ethqos
- qcom,sm8150-ethqos
@@ -32,11 +33,13 @@ properties:
- const: rgmii
interrupts:
+ minItems: 1
items:
- description: Combined signal for various interrupt events
- description: The interrupt that occurs when Rx exits the LPI state
interrupt-names:
+ minItems: 1
items:
- const: macirq
- const: eth_lpi
@@ -49,11 +52,18 @@ properties:
- const: stmmaceth
- const: pclk
- const: ptp_ref
- - const: rgmii
+ - enum:
+ - rgmii
+ - phyaux
iommus:
maxItems: 1
+ phys: true
+
+ phy-names:
+ const: serdes
+
required:
- compatible
- clocks
diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml
index 2a21bbe02892..7f324c6da915 100644
--- a/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml
@@ -32,7 +32,7 @@ select:
- compatible
allOf:
- - $ref: "snps,dwmac.yaml#"
+ - $ref: snps,dwmac.yaml#
properties:
compatible:
@@ -91,12 +91,18 @@ properties:
$ref: /schemas/types.yaml#/definitions/phandle
tx_delay:
- description: Delay value for TXD timing. Range value is 0~0x7F, 0x30 as default.
+ description: Delay value for TXD timing.
$ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 0x7F
+ default: 0x30
rx_delay:
- description: Delay value for RXD timing. Range value is 0~0x7F, 0x10 as default.
+ description: Delay value for RXD timing.
$ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 0x7F
+ default: 0x10
phy-supply:
description: PHY regulator
diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
index 363b3e3ea3a6..ddf9522a5dc2 100644
--- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -67,6 +67,7 @@ properties:
- loongson,ls2k-dwmac
- loongson,ls7a-dwmac
- qcom,qcs404-ethqos
+ - qcom,sa8775p-ethqos
- qcom,sc8280xp-ethqos
- qcom,sm8150-ethqos
- renesas,r9a06g032-gmac
@@ -582,6 +583,7 @@ allOf:
- ingenic,x1600-mac
- ingenic,x1830-mac
- ingenic,x2000-mac
+ - qcom,sa8775p-ethqos
- qcom,sc8280xp-ethqos
- snps,dwmac-3.50a
- snps,dwmac-4.10a
@@ -638,6 +640,7 @@ allOf:
- ingenic,x1830-mac
- ingenic,x2000-mac
- qcom,qcs404-ethqos
+ - qcom,sa8775p-ethqos
- qcom,sc8280xp-ethqos
- qcom,sm8150-ethqos
- snps,dwmac-4.00
diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
index 395a4650e285..c9c25132d154 100644
--- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
+++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
@@ -168,14 +168,14 @@ properties:
patternProperties:
"^mdio@[0-9a-f]+$":
type: object
- $ref: "ti,davinci-mdio.yaml#"
+ $ref: ti,davinci-mdio.yaml#
description:
CPSW MDIO bus.
"^cpts@[0-9a-f]+":
type: object
- $ref: "ti,k3-am654-cpts.yaml#"
+ $ref: ti,k3-am654-cpts.yaml#
description:
CPSW Common Platform Time Sync (CPTS) module.
diff --git a/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml b/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml
index 474fa8bcf302..052f636158b3 100644
--- a/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml
@@ -19,7 +19,7 @@ select:
- compatible
allOf:
- - $ref: "snps,dwmac.yaml#"
+ - $ref: snps,dwmac.yaml#
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml
index fec1cc9b9a08..4aa521f1be8c 100644
--- a/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml
@@ -15,6 +15,9 @@ description:
These chips also have a Bluetooth portion described in a separate
binding.
+allOf:
+ - $ref: ieee80211.yaml#
+
properties:
compatible:
oneOf:
@@ -38,6 +41,7 @@ properties:
- brcm,bcm4354-fmac
- brcm,bcm4356-fmac
- brcm,bcm4359-fmac
+ - brcm,bcm4366-fmac
- cypress,cyw4373-fmac
- cypress,cyw43012-fmac
- const: brcm,bcm4329-fmac
@@ -120,7 +124,7 @@ required:
- compatible
- reg
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml
index c85ed330426d..7758a55dd328 100644
--- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml
@@ -84,6 +84,8 @@ properties:
required:
- iommus
+ ieee80211-freq-limit: true
+
qcom,ath10k-calibration-data:
$ref: /schemas/types.yaml#/definitions/uint8-array
description:
@@ -164,6 +166,7 @@ required:
additionalProperties: false
allOf:
+ - $ref: ieee80211.yaml#
- if:
properties:
compatible:
@@ -355,4 +358,5 @@ examples:
"msi14",
"msi15",
"legacy";
+ ieee80211-freq-limit = <5470000 5875000>;
};
diff --git a/Documentation/devicetree/bindings/net/xilinx_axienet.txt b/Documentation/devicetree/bindings/net/xilinx_axienet.txt
deleted file mode 100644
index 80e505a2fda1..000000000000
--- a/Documentation/devicetree/bindings/net/xilinx_axienet.txt
+++ /dev/null
@@ -1,101 +0,0 @@
-XILINX AXI ETHERNET Device Tree Bindings
---------------------------------------------------------
-
-Also called AXI 1G/2.5G Ethernet Subsystem, the xilinx axi ethernet IP core
-provides connectivity to an external ethernet PHY supporting different
-interfaces: MII, GMII, RGMII, SGMII, 1000BaseX. It also includes two
-segments of memory for buffering TX and RX, as well as the capability of
-offloading TX/RX checksum calculation off the processor.
-
-Management configuration is done through the AXI interface, while payload is
-sent and received through means of an AXI DMA controller. This driver
-includes the DMA driver code, so this driver is incompatible with AXI DMA
-driver.
-
-For more details about mdio please refer phy.txt file in the same directory.
-
-Required properties:
-- compatible : Must be one of "xlnx,axi-ethernet-1.00.a",
- "xlnx,axi-ethernet-1.01.a", "xlnx,axi-ethernet-2.01.a"
-- reg : Address and length of the IO space, as well as the address
- and length of the AXI DMA controller IO space, unless
- axistream-connected is specified, in which case the reg
- attribute of the node referenced by it is used.
-- interrupts : Should be a list of 2 or 3 interrupts: TX DMA, RX DMA,
- and optionally Ethernet core. If axistream-connected is
- specified, the TX/RX DMA interrupts should be on that node
- instead, and only the Ethernet core interrupt is optionally
- specified here.
-- phy-handle : Should point to the external phy device if exists. Pointing
- this to the PCS/PMA PHY is deprecated and should be avoided.
- See ethernet.txt file in the same directory.
-- xlnx,rxmem : Set to allocated memory buffer for Rx/Tx in the hardware
-
-Optional properties:
-- phy-mode : See ethernet.txt
-- xlnx,phy-type : Deprecated, do not use, but still accepted in preference
- to phy-mode.
-- xlnx,txcsum : 0 or empty for disabling TX checksum offload,
- 1 to enable partial TX checksum offload,
- 2 to enable full TX checksum offload
-- xlnx,rxcsum : Same values as xlnx,txcsum but for RX checksum offload
-- xlnx,switch-x-sgmii : Boolean to indicate the Ethernet core is configured to
- support both 1000BaseX and SGMII modes. If set, the phy-mode
- should be set to match the mode selected on core reset (i.e.
- by the basex_or_sgmii core input line).
-- clock-names: Tuple listing input clock names. Possible clocks:
- s_axi_lite_clk: Clock for AXI register slave interface
- axis_clk: AXI4-Stream clock for TXD RXD TXC and RXS interfaces
- ref_clk: Ethernet reference clock, used by signal delay
- primitives and transceivers
- mgt_clk: MGT reference clock (used by optional internal
- PCS/PMA PHY)
-
- Note that if s_axi_lite_clk is not specified by name, the
- first clock of any name is used for this. If that is also not
- specified, the clock rate is auto-detected from the CPU clock
- (but only on platforms where this is possible). New device
- trees should specify all applicable clocks by name - the
- fallbacks to an unnamed clock or to CPU clock are only for
- backward compatibility.
-- clocks: Phandles to input clocks matching clock-names. Refer to common
- clock bindings.
-- axistream-connected: Reference to another node which contains the resources
- for the AXI DMA controller used by this device.
- If this is specified, the DMA-related resources from that
- device (DMA registers and DMA TX/RX interrupts) rather
- than this one will be used.
- - mdio : Child node for MDIO bus. Must be defined if PHY access is
- required through the core's MDIO interface (i.e. always,
- unless the PHY is accessed through a different bus).
- Non-standard MDIO bus frequency is supported via
- "clock-frequency", see mdio.yaml.
-
- - pcs-handle: Phandle to the internal PCS/PMA PHY in SGMII or 1000Base-X
- modes, where "pcs-handle" should be used to point
- to the PCS/PMA PHY, and "phy-handle" should point to an
- external PHY if exists.
-
-Example:
- axi_ethernet_eth: ethernet@40c00000 {
- compatible = "xlnx,axi-ethernet-1.00.a";
- device_type = "network";
- interrupt-parent = <&microblaze_0_axi_intc>;
- interrupts = <2 0 1>;
- clock-names = "s_axi_lite_clk", "axis_clk", "ref_clk", "mgt_clk";
- clocks = <&axi_clk>, <&axi_clk>, <&pl_enet_ref_clk>, <&mgt_clk>;
- phy-mode = "mii";
- reg = <0x40c00000 0x40000 0x50c00000 0x40000>;
- xlnx,rxcsum = <0x2>;
- xlnx,rxmem = <0x800>;
- xlnx,txcsum = <0x2>;
- phy-handle = <&phy0>;
- axi_ethernetlite_0_mdio: mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- phy0: phy@0 {
- device_type = "ethernet-phy";
- reg = <1>;
- };
- };
- };
diff --git a/Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml b/Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml
new file mode 100644
index 000000000000..1d33d80af11c
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml
@@ -0,0 +1,183 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/xlnx,axi-ethernet.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AXI 1G/2.5G Ethernet Subsystem
+
+description: |
+ Also called AXI 1G/2.5G Ethernet Subsystem, the xilinx axi ethernet IP core
+ provides connectivity to an external ethernet PHY supporting different
+ interfaces: MII, GMII, RGMII, SGMII, 1000BaseX. It also includes two
+ segments of memory for buffering TX and RX, as well as the capability of
+ offloading TX/RX checksum calculation off the processor.
+
+ Management configuration is done through the AXI interface, while payload is
+ sent and received through means of an AXI DMA controller. This driver
+ includes the DMA driver code, so this driver is incompatible with AXI DMA
+ driver.
+
+maintainers:
+ - Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
+
+properties:
+ compatible:
+ enum:
+ - xlnx,axi-ethernet-1.00.a
+ - xlnx,axi-ethernet-1.01.a
+ - xlnx,axi-ethernet-2.01.a
+
+ reg:
+ description:
+ Address and length of the IO space, as well as the address
+ and length of the AXI DMA controller IO space, unless
+ axistream-connected is specified, in which case the reg
+ attribute of the node referenced by it is used.
+ maxItems: 2
+
+ interrupts:
+ items:
+ - description: Ethernet core interrupt
+ - description: Tx DMA interrupt
+ - description: Rx DMA interrupt
+ description:
+ Ethernet core interrupt is optional. If axistream-connected property is
+ present DMA node should contains TX/RX DMA interrupts else DMA interrupt
+ resources are mentioned on ethernet node.
+ minItems: 1
+
+ phy-handle: true
+
+ xlnx,rxmem:
+ description:
+ Set to allocated memory buffer for Rx/Tx in the hardware.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ phy-mode:
+ enum:
+ - mii
+ - gmii
+ - rgmii
+ - sgmii
+ - 1000BaseX
+
+ xlnx,phy-type:
+ description:
+ Do not use, but still accepted in preference to phy-mode.
+ deprecated: true
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ xlnx,txcsum:
+ description:
+ TX checksum offload. 0 or empty for disabling TX checksum offload,
+ 1 to enable partial TX checksum offload and 2 to enable full TX
+ checksum offload.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2]
+
+ xlnx,rxcsum:
+ description:
+ RX checksum offload. 0 or empty for disabling RX checksum offload,
+ 1 to enable partial RX checksum offload and 2 to enable full RX
+ checksum offload.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2]
+
+ xlnx,switch-x-sgmii:
+ type: boolean
+ description:
+ Indicate the Ethernet core is configured to support both 1000BaseX and
+ SGMII modes. If set, the phy-mode should be set to match the mode
+ selected on core reset (i.e. by the basex_or_sgmii core input line).
+
+ clocks:
+ items:
+ - description: Clock for AXI register slave interface.
+ - description: AXI4-Stream clock for TXD RXD TXC and RXS interfaces.
+ - description: Ethernet reference clock, used by signal delay primitives
+ and transceivers.
+ - description: MGT reference clock (used by optional internal PCS/PMA PHY)
+
+ clock-names:
+ items:
+ - const: s_axi_lite_clk
+ - const: axis_clk
+ - const: ref_clk
+ - const: mgt_clk
+
+ axistream-connected:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: Phandle of AXI DMA controller which contains the resources
+ used by this device. If this is specified, the DMA-related resources
+ from that device (DMA registers and DMA TX/RX interrupts) rather than
+ this one will be used.
+
+ mdio:
+ type: object
+
+ pcs-handle:
+ description: Phandle to the internal PCS/PMA PHY in SGMII or 1000Base-X
+ modes, where "pcs-handle" should be used to point to the PCS/PMA PHY,
+ and "phy-handle" should point to an external PHY if exists.
+ maxItems: 1
+
+required:
+ - compatible
+ - interrupts
+ - reg
+ - xlnx,rxmem
+ - phy-handle
+
+allOf:
+ - $ref: /schemas/net/ethernet-controller.yaml#
+
+additionalProperties: false
+
+examples:
+ - |
+ axi_ethernet_eth: ethernet@40c00000 {
+ compatible = "xlnx,axi-ethernet-1.00.a";
+ interrupts = <2 0 1>;
+ clock-names = "s_axi_lite_clk", "axis_clk", "ref_clk", "mgt_clk";
+ clocks = <&axi_clk>, <&axi_clk>, <&pl_enet_ref_clk>, <&mgt_clk>;
+ phy-mode = "mii";
+ reg = <0x40c00000 0x40000>,<0x50c00000 0x40000>;
+ xlnx,rxcsum = <0x2>;
+ xlnx,rxmem = <0x800>;
+ xlnx,txcsum = <0x2>;
+ phy-handle = <&phy0>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy0: ethernet-phy@1 {
+ device_type = "ethernet-phy";
+ reg = <1>;
+ };
+ };
+ };
+
+ - |
+ axi_ethernet_eth1: ethernet@40000000 {
+ compatible = "xlnx,axi-ethernet-1.00.a";
+ interrupts = <0>;
+ clock-names = "s_axi_lite_clk", "axis_clk", "ref_clk", "mgt_clk";
+ clocks = <&axi_clk>, <&axi_clk>, <&pl_enet_ref_clk>, <&mgt_clk>;
+ phy-mode = "mii";
+ reg = <0x00 0x40000000 0x00 0x40000>;
+ xlnx,rxcsum = <0x2>;
+ xlnx,rxmem = <0x800>;
+ xlnx,txcsum = <0x2>;
+ phy-handle = <&phy1>;
+ axistream-connected = <&dma>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy1: ethernet-phy@1 {
+ device_type = "ethernet-phy";
+ reg = <1>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml b/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml
index 36def7128fca..13412af7f046 100644
--- a/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml
+++ b/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml
@@ -36,14 +36,29 @@ properties:
et0macaddr:
type: object
description: First Ethernet interface's MAC address
+ properties:
+ "#nvmem-cell-cells":
+ description: The first argument is a MAC address offset.
+ const: 1
+ additionalProperties: false
et1macaddr:
type: object
description: Second Ethernet interface's MAC address
+ properties:
+ "#nvmem-cell-cells":
+ description: The first argument is a MAC address offset.
+ const: 1
+ additionalProperties: false
et2macaddr:
type: object
description: Third Ethernet interface's MAC address
+ properties:
+ "#nvmem-cell-cells":
+ description: The first argument is a MAC address offset.
+ const: 1
+ additionalProperties: false
unevaluatedProperties: false
diff --git a/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml
index 9876243ff1e8..99e60d713dac 100644
--- a/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml
+++ b/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml
@@ -4,7 +4,7 @@
$id: http://devicetree.org/schemas/nvmem/imx-ocotp.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Freescale i.MX6 On-Chip OTP Controller (OCOTP)
+title: Freescale i.MX On-Chip OTP Controller (OCOTP)
maintainers:
- Anson Huang <Anson.Huang@nxp.com>
@@ -12,7 +12,7 @@ maintainers:
description: |
This binding represents the on-chip eFuse OTP controller found on
i.MX6Q/D, i.MX6DL/S, i.MX6SL, i.MX6SX, i.MX6UL, i.MX6ULL/ULZ, i.MX6SLL,
- i.MX7D/S, i.MX7ULP, i.MX8MQ, i.MX8MM, i.MX8MN and i.MX8MP SoCs.
+ i.MX7D/S, i.MX7ULP, i.MX8MQ, i.MX8MM, i.MX8MN i.MX8MP and i.MX93 SoCs.
allOf:
- $ref: nvmem.yaml#
@@ -32,6 +32,7 @@ properties:
- fsl,imx7ulp-ocotp
- fsl,imx8mq-ocotp
- fsl,imx8mm-ocotp
+ - fsl,imx93-ocotp
- const: syscon
- items:
- enum:
@@ -46,12 +47,6 @@ properties:
reg:
maxItems: 1
- "#address-cells":
- const: 1
-
- "#size-cells":
- const: 1
-
clocks:
maxItems: 1
@@ -61,21 +56,6 @@ required:
- compatible
- reg
-patternProperties:
- "^.*@[0-9a-f]+$":
- type: object
-
- properties:
- reg:
- maxItems: 1
- description:
- Offset and size in bytes within the storage device.
-
- required:
- - reg
-
- additionalProperties: false
-
unevaluatedProperties: false
examples:
diff --git a/Documentation/devicetree/bindings/nvmem/layouts/fixed-cell.yaml b/Documentation/devicetree/bindings/nvmem/layouts/fixed-cell.yaml
new file mode 100644
index 000000000000..e698098450e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/layouts/fixed-cell.yaml
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/layouts/fixed-cell.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Fixed offset & size NVMEM cell
+
+maintainers:
+ - Rafał Miłecki <rafal@milecki.pl>
+ - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+properties:
+ reg:
+ maxItems: 1
+
+ bits:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ - minimum: 0
+ maximum: 7
+ description:
+ Offset in bit within the address range specified by reg.
+ - minimum: 1
+ description:
+ Size in bit within the address range specified by reg.
+
+required:
+ - reg
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/nvmem/layouts/fixed-layout.yaml b/Documentation/devicetree/bindings/nvmem/layouts/fixed-layout.yaml
new file mode 100644
index 000000000000..c271537d0714
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/layouts/fixed-layout.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/layouts/fixed-layout.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVMEM layout for fixed NVMEM cells
+
+description:
+ Many NVMEM devices have hardcoded cells layout (offset and size of defined
+ NVMEM content doesn't change).
+
+ This binding allows defining such NVMEM layout with its cells. It can be used
+ on top of any NVMEM device.
+
+maintainers:
+ - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+ compatible:
+ const: fixed-layout
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 1
+
+patternProperties:
+ "@[a-f0-9]+$":
+ type: object
+ $ref: fixed-cell.yaml
+ unevaluatedProperties: false
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ calibration@4000 {
+ reg = <0x4000 0x100>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/nvmem/layouts/nvmem-layout.yaml b/Documentation/devicetree/bindings/nvmem/layouts/nvmem-layout.yaml
index 8512ee538c4c..3b40f7880774 100644
--- a/Documentation/devicetree/bindings/nvmem/layouts/nvmem-layout.yaml
+++ b/Documentation/devicetree/bindings/nvmem/layouts/nvmem-layout.yaml
@@ -18,16 +18,13 @@ description: |
perform their parsing. The nvmem-layout container is here to describe these.
oneOf:
+ - $ref: fixed-layout.yaml
- $ref: kontron,sl28-vpd.yaml
- $ref: onie,tlv-layout.yaml
properties:
compatible: true
- '#address-cells': false
-
- '#size-cells': false
-
required:
- compatible
diff --git a/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml b/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml
index d16d42fb98b6..7ec2988b597e 100644
--- a/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml
+++ b/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml
@@ -27,6 +27,7 @@ properties:
- enum:
- mediatek,mt7622-efuse
- mediatek,mt7623-efuse
+ - mediatek,mt7986-efuse
- mediatek,mt8173-efuse
- mediatek,mt8183-efuse
- mediatek,mt8186-efuse
diff --git a/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml
index 8938eec22b52..a9b822aeaa7e 100644
--- a/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml
+++ b/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml
@@ -18,12 +18,6 @@ properties:
- fsl,imx23-ocotp
- fsl,imx28-ocotp
- "#address-cells":
- const: 1
-
- "#size-cells":
- const: 1
-
reg:
maxItems: 1
@@ -35,7 +29,7 @@ required:
- reg
- clocks
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/nvmem/nvmem.yaml b/Documentation/devicetree/bindings/nvmem/nvmem.yaml
index 75bb93dda9df..980244100690 100644
--- a/Documentation/devicetree/bindings/nvmem/nvmem.yaml
+++ b/Documentation/devicetree/bindings/nvmem/nvmem.yaml
@@ -49,23 +49,8 @@ properties:
patternProperties:
"@[0-9a-f]+(,[0-7])?$":
type: object
-
- properties:
- reg:
- maxItems: 1
- description:
- Offset and size in bytes within the storage device.
-
- bits:
- $ref: /schemas/types.yaml#/definitions/uint32-array
- items:
- - minimum: 0
- maximum: 7
- description:
- Offset in bit within the address range specified by reg.
- - minimum: 1
- description:
- Size in bit within the address range specified by reg.
+ $ref: layouts/fixed-cell.yaml
+ deprecated: true
additionalProperties: true
@@ -83,24 +68,30 @@ examples:
/* ... */
- /* Data cells */
- tsens_calibration: calib@404 {
- reg = <0x404 0x10>;
- };
-
- tsens_calibration_bckp: calib_bckp@504 {
- reg = <0x504 0x11>;
- bits = <6 128>;
- };
-
- pvs_version: pvs-version@6 {
- reg = <0x6 0x2>;
- bits = <7 2>;
- };
-
- speed_bin: speed-bin@c{
- reg = <0xc 0x1>;
- bits = <2 3>;
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* Data cells */
+ tsens_calibration: calib@404 {
+ reg = <0x404 0x10>;
+ };
+
+ tsens_calibration_bckp: calib_bckp@504 {
+ reg = <0x504 0x11>;
+ bits = <6 128>;
+ };
+
+ pvs_version: pvs-version@6 {
+ reg = <0x6 0x2>;
+ bits = <7 2>;
+ };
+
+ speed_bin: speed-bin@c{
+ reg = <0xc 0x1>;
+ bits = <2 3>;
+ };
};
};
diff --git a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
index 8d8503dd934b..6cd4682a167d 100644
--- a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
+++ b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
@@ -18,8 +18,11 @@ properties:
- enum:
- qcom,apq8064-qfprom
- qcom,apq8084-qfprom
+ - qcom,ipq5332-qfprom
+ - qcom,ipq6018-qfprom
- qcom,ipq8064-qfprom
- qcom,ipq8074-qfprom
+ - qcom,ipq9574-qfprom
- qcom,msm8916-qfprom
- qcom,msm8974-qfprom
- qcom,msm8976-qfprom
@@ -64,12 +67,6 @@ properties:
power-domains:
maxItems: 1
- # Needed if any child nodes are present.
- "#address-cells":
- const: 1
- "#size-cells":
- const: 1
-
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml b/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml
index dce0c7d84ce7..cd980def97b8 100644
--- a/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml
+++ b/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml
@@ -25,12 +25,6 @@ properties:
reg:
maxItems: 1
- "#address-cells":
- const: 1
-
- "#size-cells":
- const: 1
-
ranges: true
required:
diff --git a/Documentation/devicetree/bindings/nvmem/rmem.yaml b/Documentation/devicetree/bindings/nvmem/rmem.yaml
index 38a39c9b8c1c..1ec0d09bcafa 100644
--- a/Documentation/devicetree/bindings/nvmem/rmem.yaml
+++ b/Documentation/devicetree/bindings/nvmem/rmem.yaml
@@ -17,6 +17,7 @@ properties:
items:
- enum:
- raspberrypi,bootloader-config
+ - raspberrypi,bootloader-public-key
- const: nvmem-rmem
reg:
diff --git a/Documentation/devicetree/bindings/nvmem/rockchip,otp.yaml b/Documentation/devicetree/bindings/nvmem/rockchip,otp.yaml
new file mode 100644
index 000000000000..9c6eff788928
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/rockchip,otp.yaml
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/rockchip,otp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip internal OTP (One Time Programmable) memory
+
+maintainers:
+ - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+ compatible:
+ enum:
+ - rockchip,px30-otp
+ - rockchip,rk3308-otp
+ - rockchip,rk3588-otp
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ minItems: 3
+ maxItems: 4
+
+ clock-names:
+ minItems: 3
+ items:
+ - const: otp
+ - const: apb_pclk
+ - const: phy
+ - const: arb
+
+ resets:
+ minItems: 1
+ maxItems: 3
+
+ reset-names:
+ minItems: 1
+ maxItems: 3
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+
+allOf:
+ - $ref: nvmem.yaml#
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - rockchip,px30-otp
+ - rockchip,rk3308-otp
+ then:
+ properties:
+ clocks:
+ maxItems: 3
+ resets:
+ maxItems: 1
+ reset-names:
+ items:
+ - const: phy
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - rockchip,rk3588-otp
+ then:
+ properties:
+ clocks:
+ minItems: 4
+ resets:
+ minItems: 3
+ reset-names:
+ items:
+ - const: otp
+ - const: apb
+ - const: arb
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/px30-cru.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ otp: efuse@ff290000 {
+ compatible = "rockchip,px30-otp";
+ reg = <0x0 0xff290000 0x0 0x4000>;
+ clocks = <&cru SCLK_OTP_USR>, <&cru PCLK_OTP_NS>,
+ <&cru PCLK_OTP_PHY>;
+ clock-names = "otp", "apb_pclk", "phy";
+ resets = <&cru SRST_OTP_PHY>;
+ reset-names = "phy";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpu_id: id@7 {
+ reg = <0x07 0x10>;
+ };
+
+ cpu_leakage: cpu-leakage@17 {
+ reg = <0x17 0x1>;
+ };
+
+ performance: performance@1e {
+ reg = <0x1e 0x1>;
+ bits = <4 3>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/nvmem/rockchip-otp.txt b/Documentation/devicetree/bindings/nvmem/rockchip-otp.txt
deleted file mode 100644
index 40f649f7c2e5..000000000000
--- a/Documentation/devicetree/bindings/nvmem/rockchip-otp.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Rockchip internal OTP (One Time Programmable) memory device tree bindings
-
-Required properties:
-- compatible: Should be one of the following.
- - "rockchip,px30-otp" - for PX30 SoCs.
- - "rockchip,rk3308-otp" - for RK3308 SoCs.
-- reg: Should contain the registers location and size
-- clocks: Must contain an entry for each entry in clock-names.
-- clock-names: Should be "otp", "apb_pclk" and "phy".
-- resets: Must contain an entry for each entry in reset-names.
- See ../../reset/reset.txt for details.
-- reset-names: Should be "phy".
-
-See nvmem.txt for more information.
-
-Example:
- otp: otp@ff290000 {
- compatible = "rockchip,px30-otp";
- reg = <0x0 0xff290000 0x0 0x4000>;
- #address-cells = <1>;
- #size-cells = <1>;
- clocks = <&cru SCLK_OTP_USR>, <&cru PCLK_OTP_NS>,
- <&cru PCLK_OTP_PHY>;
- clock-names = "otp", "apb_pclk", "phy";
- };
diff --git a/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml b/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml
index b8bca0599c45..efccc5aacbe0 100644
--- a/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml
+++ b/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml
@@ -14,9 +14,6 @@ allOf:
- $ref: nvmem.yaml#
properties:
- "#address-cells": true
- "#size-cells": true
-
compatible:
const: socionext,uniphier-efuse
diff --git a/Documentation/devicetree/bindings/nvmem/sunplus,sp7021-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/sunplus,sp7021-ocotp.yaml
index 8877c2283e9e..da3f1de7d281 100644
--- a/Documentation/devicetree/bindings/nvmem/sunplus,sp7021-ocotp.yaml
+++ b/Documentation/devicetree/bindings/nvmem/sunplus,sp7021-ocotp.yaml
@@ -28,12 +28,6 @@ properties:
clocks:
maxItems: 1
- "#address-cells":
- const: 1
-
- "#size-cells":
- const: 1
-
thermal-calibration:
type: object
description: thermal calibration values
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
index b3c22ebd156c..c94b49498f69 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
@@ -11,9 +11,13 @@ maintainers:
properties:
compatible:
- enum:
- - qcom,sdx55-pcie-ep
- - qcom,sm8450-pcie-ep
+ oneOf:
+ - enum:
+ - qcom,sdx55-pcie-ep
+ - qcom,sm8450-pcie-ep
+ - items:
+ - const: qcom,sdx65-pcie-ep
+ - const: qcom,sdx55-pcie-ep
reg:
items:
diff --git a/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-ep.yaml
index 88386a6d7011..6b62f6f58efe 100644
--- a/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-ep.yaml
+++ b/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-ep.yaml
@@ -47,7 +47,7 @@ examples:
pcie-ep@f8000000 {
compatible = "rockchip,rk3399-pcie-ep";
- reg = <0x0 0xfd000000 0x0 0x1000000>, <0x0 0x80000000 0x0 0x20000>;
+ reg = <0x0 0xfd000000 0x0 0x1000000>, <0x0 0xfa000000 0x0 0x2000000>;
reg-names = "apb-base", "mem-base";
clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>,
<&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>;
@@ -63,6 +63,8 @@ examples:
phys = <&pcie_phy 0>, <&pcie_phy 1>, <&pcie_phy 2>, <&pcie_phy 3>;
phy-names = "pcie-phy-0", "pcie-phy-1", "pcie-phy-2", "pcie-phy-3";
rockchip,max-outbound-regions = <16>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_clkreqnb_cpm>;
};
};
...
diff --git a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
index 24c88942e59e..a4f61ced5e88 100644
--- a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
@@ -41,20 +41,24 @@ properties:
- const: config
clocks:
+ minItems: 5
items:
- description: AHB clock for PCIe master
- description: AHB clock for PCIe slave
- description: AHB clock for PCIe dbi
- description: APB clock for PCIe
- description: Auxiliary clock for PCIe
+ - description: PIPE clock
clock-names:
+ minItems: 5
items:
- const: aclk_mst
- const: aclk_slv
- const: aclk_dbi
- const: pclk
- const: aux
+ - const: pipe
msi-map: true
@@ -70,13 +74,19 @@ properties:
maxItems: 1
ranges:
- maxItems: 2
+ minItems: 2
+ maxItems: 3
resets:
- maxItems: 1
+ minItems: 1
+ maxItems: 2
reset-names:
- const: pipe
+ oneOf:
+ - const: pipe
+ - items:
+ - const: pwr
+ - const: pipe
vpcie3v3-supply: true
diff --git a/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml
index 24ddc2855b94..4734be456bde 100644
--- a/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml
+++ b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: CPM Host Controller device tree for Xilinx Versal SoCs
maintainers:
- - Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
+ - Bharat Kumar Gogada <bharat.kumar.gogada@amd.com>
allOf:
- $ref: /schemas/pci/pci-bus.yaml#
diff --git a/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml b/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml
index 50f46a6898b1..4adab0149108 100644
--- a/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml
+++ b/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml
@@ -42,8 +42,8 @@ examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
pmu {
- #address-cells=<2>;
- #size-cells=<2>;
+ #address-cells = <2>;
+ #size-cells = <2>;
pmu@ff638000 {
compatible = "amlogic,g12a-ddr-pmu";
diff --git a/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml b/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml
index 80a92385367e..e9fad4b3de68 100644
--- a/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml
+++ b/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml
@@ -4,7 +4,7 @@
$id: http://devicetree.org/schemas/perf/fsl-imx-ddr.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Freescale(NXP) IMX8 DDR performance monitor
+title: Freescale(NXP) IMX8/9 DDR performance monitor
maintainers:
- Frank Li <frank.li@nxp.com>
@@ -19,6 +19,7 @@ properties:
- fsl,imx8mm-ddr-pmu
- fsl,imx8mn-ddr-pmu
- fsl,imx8mp-ddr-pmu
+ - fsl,imx93-ddr-pmu
- items:
- enum:
- fsl,imx8mm-ddr-pmu
diff --git a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml
index 43a4b880534c..580fbe37b37f 100644
--- a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml
@@ -115,8 +115,8 @@ allOf:
compatible:
contains:
enum:
- - const: brcm,bcm4908-usb-phy
- - const: brcm,brcmstb-usb-phy
+ - brcm,bcm4908-usb-phy
+ - brcm,brcmstb-usb-phy
then:
properties:
reg:
diff --git a/Documentation/devicetree/bindings/phy/brcm,kona-usb2-phy.txt b/Documentation/devicetree/bindings/phy/brcm,kona-usb2-phy.txt
deleted file mode 100644
index 3dc8b3d2ffbb..000000000000
--- a/Documentation/devicetree/bindings/phy/brcm,kona-usb2-phy.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-BROADCOM KONA USB2 PHY
-
-Required properties:
- - compatible: brcm,kona-usb2-phy
- - reg: offset and length of the PHY registers
- - #phy-cells: must be 0
-Refer to phy/phy-bindings.txt for the generic PHY binding properties
-
-Example:
-
- usbphy: usb-phy@3f130000 {
- compatible = "brcm,kona-usb2-phy";
- reg = <0x3f130000 0x28>;
- #phy-cells = <0>;
- };
diff --git a/Documentation/devicetree/bindings/phy/brcm,kona-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,kona-usb2-phy.yaml
new file mode 100644
index 000000000000..d7faeb81f7a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/brcm,kona-usb2-phy.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/brcm,kona-usb2-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Kona family USB 2.0 PHY
+
+maintainers:
+ - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+ compatible:
+ const: brcm,kona-usb2-phy
+
+ reg:
+ maxItems: 1
+
+ '#phy-cells':
+ const: 0
+
+required:
+ - compatible
+ - reg
+ - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ usb-phy@3f130000 {
+ compatible = "brcm,kona-usb2-phy";
+ reg = <0x3f130000 0x28>;
+ #phy-cells = <0>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/phy/cdns,salvo-phy.yaml b/Documentation/devicetree/bindings/phy/cdns,salvo-phy.yaml
index c9e65a2facd5..c7281a7c8244 100644
--- a/Documentation/devicetree/bindings/phy/cdns,salvo-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/cdns,salvo-phy.yaml
@@ -31,6 +31,12 @@ properties:
"#phy-cells":
const: 0
+ cdns,usb2-disconnect-threshold-microvolt:
+ description: The microvolt threshold value utilized for detecting
+ USB disconnection event.
+ enum: [575, 610, 645]
+ default: 575
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml
index e6f9f5540cc3..dc3a3f709fea 100644
--- a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml
@@ -35,6 +35,53 @@ properties:
description:
A phandle to the regulator for USB VBUS.
+ fsl,phy-tx-vref-tune-percent:
+ description:
+ Tunes the HS DC level relative to the nominal level
+ minimum: 94
+ maximum: 124
+
+ fsl,phy-tx-rise-tune-percent:
+ description:
+ Adjusts the rise/fall time duration of the HS waveform relative to
+ its nominal value
+ minimum: 97
+ maximum: 103
+
+ fsl,phy-tx-preemp-amp-tune-microamp:
+ description:
+ Adjust amount of current sourced to DPn and DMn after a J-to-K
+ or K-to-J transition. Default is 0 (disabled).
+ minimum: 0
+ maximum: 1800
+
+ fsl,phy-tx-vboost-level-microvolt:
+ description:
+ Adjust the boosted transmit launch pk-pk differential amplitude
+ minimum: 880
+ maximum: 1120
+
+ fsl,phy-comp-dis-tune-percent:
+ description:
+ Adjust the voltage level used to detect a disconnect event at the host
+ relative to the nominal value
+ minimum: 91
+ maximum: 115
+
+ fsl,phy-pcs-tx-deemph-3p5db-attenuation-db:
+ description:
+ Adjust TX de-emphasis attenuation in dB at nominal
+ 3.5dB point as per USB specification
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 36
+
+ fsl,phy-pcs-tx-swing-full-percent:
+ description:
+ Scaling of the voltage defined by fsl,phy-tx-vboost-level-microvolt
+ minimum: 0
+ maximum: 100
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml b/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml
new file mode 100644
index 000000000000..f4b1ca2fb562
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml
@@ -0,0 +1,128 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/fsl,mxs-usbphy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale MXS USB Phy Device
+
+maintainers:
+ - Xu Yang <xu.yang_2@nxp.com>
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - fsl,imx23-usbphy
+ - fsl,imx7ulp-usbphy
+ - fsl,vf610-usbphy
+ - items:
+ - enum:
+ - fsl,imx28-usbphy
+ - fsl,imx6ul-usbphy
+ - fsl,imx6sl-usbphy
+ - fsl,imx6sx-usbphy
+ - fsl,imx6q-usbphy
+ - const: fsl,imx23-usbphy
+ - items:
+ - const: fsl,imx6sll-usbphy
+ - const: fsl,imx6ul-usbphy
+ - const: fsl,imx23-usbphy
+ - items:
+ - enum:
+ - fsl,imx8dxl-usbphy
+ - fsl,imx8qm-usbphy
+ - fsl,imx8ulp-usbphy
+ - const: fsl,imx7ulp-usbphy
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ '#phy-cells':
+ const: 0
+
+ power-domains:
+ maxItems: 1
+
+ fsl,anatop:
+ description:
+ phandle for anatop register, it is only for imx6 SoC series.
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ phy-3p0-supply:
+ description:
+ One of USB PHY's power supply. Can be used to keep a good signal
+ quality.
+
+ fsl,tx-cal-45-dn-ohms:
+ description:
+ Resistance (in ohms) of switchable high-speed trimming resistor
+ connected in parallel with the 45 ohm resistor that terminates
+ the DN output signal.
+ minimum: 35
+ maximum: 54
+ default: 45
+
+ fsl,tx-cal-45-dp-ohms:
+ description:
+ Resistance (in ohms) of switchable high-speed trimming resistor
+ connected in parallel with the 45 ohm resistor that terminates
+ the DP output signal.
+ minimum: 35
+ maximum: 54
+ default: 45
+
+ fsl,tx-d-cal:
+ description:
+ Current trimming value (as a percentage) of the 17.78 mA TX
+ reference current.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 79
+ maximum: 119
+ default: 100
+
+required:
+ - compatible
+ - reg
+ - clocks
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ oneOf:
+ - enum:
+ - fsl,imx6q-usbphy
+ - fsl,imx6sl-usbphy
+ - fsl,imx6sx-usbphy
+ - fsl,imx6sll-usbphy
+ - fsl,vf610-usbphy
+ - items:
+ - const: fsl,imx6ul-usbphy
+ - const: fsl,imx23-usbphy
+ then:
+ required:
+ - fsl,anatop
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/imx6qdl-clock.h>
+
+ usbphy1: usb-phy@20c9000 {
+ compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
+ reg = <0x020c9000 0x1000>;
+ clocks = <&clks IMX6QDL_CLK_USBPHY1>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,anatop = <&anatop>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml b/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml
index 5d54b0a0e873..7dd6a4d94b48 100644
--- a/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml
@@ -15,7 +15,7 @@ description: |
properties:
$nodename:
- pattern: "combophy(@.*|-[0-9a-f])*$"
+ pattern: "combophy(@.*|-([0-9]|[1-9][0-9]+))?$"
compatible:
items:
diff --git a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
index 26f2b887cfc1..a63b20dfa4a5 100644
--- a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
@@ -26,6 +26,10 @@ properties:
- const: mediatek,mt2701-mipi-tx
- items:
- enum:
+ - mediatek,mt6795-mipi-tx
+ - const: mediatek,mt8173-mipi-tx
+ - items:
+ - enum:
- mediatek,mt8365-mipi-tx
- const: mediatek,mt8183-mipi-tx
- const: mediatek,mt2701-mipi-tx
@@ -83,7 +87,7 @@ examples:
clocks = <&clk26m>;
clock-output-names = "mipi_tx0_pll";
drive-strength-microamp = <4000>;
- nvmem-cells= <&mipi_tx_calibration>;
+ nvmem-cells = <&mipi_tx_calibration>;
nvmem-cell-names = "calibration-data";
#clock-cells = <0>;
#phy-cells = <0>;
diff --git a/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.yaml b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.yaml
index 786cfd71cb7e..3c28ec50f097 100644
--- a/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.yaml
@@ -32,15 +32,6 @@ properties:
clock-names:
const: phy_ref
- assigned-clocks:
- maxItems: 1
-
- assigned-clock-parents:
- maxItems: 1
-
- assigned-clock-rates:
- maxItems: 1
-
"#phy-cells":
const: 0
diff --git a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt b/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt
deleted file mode 100644
index 70c813b0755f..000000000000
--- a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-* Freescale MXS USB Phy Device
-
-Required properties:
-- compatible: should contain:
- * "fsl,imx23-usbphy" for imx23 and imx28
- * "fsl,imx6q-usbphy" for imx6dq and imx6dl
- * "fsl,imx6sl-usbphy" for imx6sl
- * "fsl,vf610-usbphy" for Vybrid vf610
- * "fsl,imx6sx-usbphy" for imx6sx
- * "fsl,imx7ulp-usbphy" for imx7ulp
- * "fsl,imx8dxl-usbphy" for imx8dxl
- "fsl,imx23-usbphy" is still a fallback for other strings
-- reg: Should contain registers location and length
-- interrupts: Should contain phy interrupt
-- fsl,anatop: phandle for anatop register, it is only for imx6 SoC series
-
-Optional properties:
-- fsl,tx-cal-45-dn-ohms: Integer [35-54]. Resistance (in ohms) of switchable
- high-speed trimming resistor connected in parallel with the 45 ohm resistor
- that terminates the DN output signal. Default: 45
-- fsl,tx-cal-45-dp-ohms: Integer [35-54]. Resistance (in ohms) of switchable
- high-speed trimming resistor connected in parallel with the 45 ohm resistor
- that terminates the DP output signal. Default: 45
-- fsl,tx-d-cal: Integer [79-119]. Current trimming value (as a percentage) of
- the 17.78mA TX reference current. Default: 100
-
-Example:
-usbphy1: usb-phy@20c9000 {
- compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
- reg = <0x020c9000 0x1000>;
- interrupts = <0 44 0x04>;
- fsl,anatop = <&anatop>;
-};
diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml b/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
index 9ae514fa7533..d3cd7997879f 100644
--- a/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
+++ b/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
@@ -31,8 +31,14 @@ properties:
- const: pipe
resets:
+ minItems: 1
+ maxItems: 2
+
+ reset-names:
+ minItems: 1
items:
- - description: exclusive PHY reset line
+ - const: phy
+ - const: apb
rockchip,enable-ssc:
type: boolean
@@ -78,6 +84,32 @@ required:
- rockchip,pipe-phy-grf
- "#phy-cells"
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3568-naneng-combphy
+ then:
+ properties:
+ resets:
+ maxItems: 1
+ reset-names:
+ maxItems: 1
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3588-naneng-combphy
+ then:
+ properties:
+ resets:
+ minItems: 2
+ reset-names:
+ minItems: 2
+ required:
+ - reset-names
+
additionalProperties: false
examples:
diff --git a/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
index c4f8e6ffa5c3..6566353f1a02 100644
--- a/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
@@ -43,6 +43,9 @@ properties:
"#phy-cells":
const: 0
+ power-domains:
+ maxItems: 1
+
vdda-phy-supply: true
vdda-pll-supply: true
diff --git a/Documentation/devicetree/bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml
index 62045dcfb20c..3d42ee3901a1 100644
--- a/Documentation/devicetree/bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml
@@ -203,6 +203,7 @@ allOf:
compatible:
contains:
enum:
+ - qcom,sc8180x-qmp-pcie-phy
- qcom,sm8250-qmp-gen3x2-pcie-phy
- qcom,sm8250-qmp-modem-pcie-phy
- qcom,sm8450-qmp-gen4x2-pcie-phy
@@ -224,7 +225,6 @@ allOf:
compatible:
contains:
enum:
- - qcom,sc8180x-qmp-pcie-phy
- qcom,sdm845-qmp-pcie-phy
- qcom,sdx55-qmp-pcie-phy
- qcom,sm8250-qmp-gen3x1-pcie-phy
diff --git a/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-ufs-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-ufs-phy.yaml
index 80a5348dbfde..881ba543fd46 100644
--- a/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-ufs-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-ufs-phy.yaml
@@ -160,6 +160,7 @@ allOf:
contains:
enum:
- qcom,msm8998-qmp-ufs-phy
+ - qcom,sc8180x-qmp-ufs-phy
- qcom,sdm845-qmp-ufs-phy
- qcom,sm6350-qmp-ufs-phy
- qcom,sm8150-qmp-ufs-phy
@@ -183,23 +184,6 @@ allOf:
compatible:
contains:
enum:
- - qcom,sc8180x-qmp-ufs-phy
- then:
- patternProperties:
- "^phy@[0-9a-f]+$":
- properties:
- reg:
- items:
- - description: TX
- - description: RX
- - description: PCS
- - description: PCS_MISC
-
- - if:
- properties:
- compatible:
- contains:
- enum:
- qcom,msm8996-qmp-ufs-phy
- qcom,sm6115-qmp-ufs-phy
then:
diff --git a/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-usb3-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-usb3-phy.yaml
index e81a38281f8c..4c96dab5b9e3 100644
--- a/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-usb3-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-usb3-phy.yaml
@@ -23,14 +23,12 @@ properties:
- qcom,ipq8074-qmp-usb3-phy
- qcom,msm8996-qmp-usb3-phy
- qcom,msm8998-qmp-usb3-phy
- - qcom,qcm2290-qmp-usb3-phy
- qcom,sc7180-qmp-usb3-phy
- qcom,sc8180x-qmp-usb3-phy
- qcom,sdm845-qmp-usb3-phy
- qcom,sdm845-qmp-usb3-uni-phy
- qcom,sdx55-qmp-usb3-uni-phy
- qcom,sdx65-qmp-usb3-uni-phy
- - qcom,sm6115-qmp-usb3-phy
- qcom,sm8150-qmp-usb3-phy
- qcom,sm8150-qmp-usb3-uni-phy
- qcom,sm8250-qmp-usb3-phy
@@ -253,29 +251,6 @@ allOf:
compatible:
contains:
enum:
- - qcom,qcm2290-qmp-usb3-phy
- - qcom,sm6115-qmp-usb3-phy
- then:
- properties:
- clocks:
- maxItems: 3
- clock-names:
- items:
- - const: cfg_ahb
- - const: ref
- - const: com_aux
- resets:
- maxItems: 2
- reset-names:
- items:
- - const: phy_phy
- - const: phy
-
- - if:
- properties:
- compatible:
- contains:
- enum:
- qcom,sdm845-qmp-usb3-phy
- qcom,sm8150-qmp-usb3-phy
- qcom,sm8350-qmp-usb3-phy
@@ -318,12 +293,10 @@ allOf:
enum:
- qcom,ipq6018-qmp-usb3-phy
- qcom,ipq8074-qmp-usb3-phy
- - qcom,qcm2290-qmp-usb3-phy
- qcom,sc7180-qmp-usb3-phy
- qcom,sc8180x-qmp-usb3-phy
- qcom,sdx55-qmp-usb3-uni-phy
- qcom,sdx65-qmp-usb3-uni-phy
- - qcom,sm6115-qmp-usb3-phy
- qcom,sm8150-qmp-usb3-uni-phy
- qcom,sm8250-qmp-usb3-phy
then:
diff --git a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
index 543c1a2811a5..95eecbaef05c 100644
--- a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
@@ -18,13 +18,14 @@ properties:
oneOf:
- items:
- enum:
+ - qcom,ipq6018-qusb2-phy
- qcom,ipq8074-qusb2-phy
+ - qcom,ipq9574-qusb2-phy
- qcom,msm8953-qusb2-phy
- qcom,msm8996-qusb2-phy
- qcom,msm8998-qusb2-phy
- qcom,qcm2290-qusb2-phy
- qcom,sdm660-qusb2-phy
- - qcom,ipq6018-qusb2-phy
- qcom,sm4250-qusb2-phy
- qcom,sm6115-qusb2-phy
- items:
diff --git a/Documentation/devicetree/bindings/phy/qcom,sa8775p-dwmac-sgmii-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sa8775p-dwmac-sgmii-phy.yaml
new file mode 100644
index 000000000000..b9107759b2a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,sa8775p-dwmac-sgmii-phy.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,sa8775p-dwmac-sgmii-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SerDes/SGMII ethernet PHY controller
+
+maintainers:
+ - Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
+
+description:
+ The SerDes PHY sits between the MAC and the external PHY and provides
+ separate Rx Tx lines.
+
+properties:
+ compatible:
+ const: qcom,sa8775p-dwmac-sgmii-phy
+
+ reg:
+ items:
+ - description: serdes
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: sgmi_ref
+
+ phy-supply:
+ description:
+ Phandle to a regulator that provides power to the PHY.
+
+ "#phy-cells":
+ const: 0
+
+required:
+ - compatible
+ - reg
+ - "#phy-cells"
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,sa8775p-gcc.h>
+ serdes_phy: phy@8901000 {
+ compatible = "qcom,sa8775p-dwmac-sgmii-phy";
+ reg = <0x08901000 0xe10>;
+ clocks = <&gcc GCC_SGMI_CLKREF_EN>;
+ clock-names = "sgmi_ref";
+ #phy-cells = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml
index 0ef2c9b9d466..d30734338888 100644
--- a/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml
@@ -61,6 +61,10 @@ properties:
power-domains:
maxItems: 1
+ orientation-switch:
+ description: Flag the port as possible handler of orientation switching
+ type: boolean
+
resets:
items:
- description: reset of phy block.
@@ -251,6 +255,8 @@ examples:
vdda-phy-supply = <&vdda_usb2_ss_1p2>;
vdda-pll-supply = <&vdda_usb2_ss_core>;
+ orientation-switch;
+
usb3-phy@200 {
reg = <0x200 0x128>,
<0x400 0x200>,
diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml
index 94c0fab065a8..a1897a7606df 100644
--- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml
@@ -78,9 +78,9 @@ allOf:
then:
properties:
clocks:
- maxItems: 3
+ minItems: 3
clock-names:
- maxItems: 3
+ minItems: 3
else:
properties:
clocks:
diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
index 16fce1038285..f99fbbcd68fb 100644
--- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
@@ -16,7 +16,11 @@ description:
properties:
compatible:
enum:
+ - qcom,ipq9574-qmp-usb3-phy
+ - qcom,qcm2290-qmp-usb3-phy
+ - qcom,sa8775p-qmp-usb3-uni-phy
- qcom,sc8280xp-qmp-usb3-uni-phy
+ - qcom,sm6115-qmp-usb3-phy
reg:
maxItems: 1
@@ -25,11 +29,7 @@ properties:
maxItems: 4
clock-names:
- items:
- - const: aux
- - const: ref
- - const: com_aux
- - const: pipe
+ maxItems: 4
power-domains:
maxItems: 1
@@ -60,7 +60,6 @@ required:
- reg
- clocks
- clock-names
- - power-domains
- resets
- reset-names
- vdda-phy-supply
@@ -69,6 +68,60 @@ required:
- clock-output-names
- "#phy-cells"
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,ipq9574-qmp-usb3-phy
+ then:
+ properties:
+ clock-names:
+ items:
+ - const: aux
+ - const: ref
+ - const: cfg_ahb
+ - const: pipe
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,qcm2290-qmp-usb3-phy
+ - qcom,sm6115-qmp-usb3-phy
+ then:
+ properties:
+ clocks:
+ maxItems: 4
+ clock-names:
+ items:
+ - const: cfg_ahb
+ - const: ref
+ - const: com_aux
+ - const: pipe
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sa8775p-qmp-usb3-uni-phy
+ - qcom,sc8280xp-qmp-usb3-uni-phy
+ then:
+ properties:
+ clocks:
+ maxItems: 4
+ clock-names:
+ items:
+ - const: aux
+ - const: ref
+ - const: com_aux
+ - const: pipe
+ required:
+ - power-domains
+
additionalProperties: false
examples:
diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
index 3cd5fc3e8fab..ef1c02d8ac88 100644
--- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
@@ -60,6 +60,26 @@ properties:
description:
See include/dt-bindings/dt-bindings/phy/phy-qcom-qmp.h
+ orientation-switch:
+ description:
+ Flag the PHY as possible handler of USB Type-C orientation switching
+ type: boolean
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Output endpoint of the PHY
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Incoming endpoint from the USB controller
+
+ port@2:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Incoming endpoint from the DisplayPort controller
+
required:
- compatible
- reg
@@ -98,6 +118,37 @@ examples:
vdda-phy-supply = <&vreg_l9d>;
vdda-pll-supply = <&vreg_l4d>;
+ orientation-switch;
+
#clock-cells = <1>;
#phy-cells = <1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ endpoint {
+ remote-endpoint = <&typec_connector_ss>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ endpoint {
+ remote-endpoint = <&dwc3_ss_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ endpoint {
+ remote-endpoint = <&mdss_dp_out>;
+ };
+ };
+ };
};
diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml
index aa97478dd016..f042d6af1594 100644
--- a/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml
@@ -13,7 +13,9 @@ if:
properties:
compatible:
contains:
- const: qcom,usb-hs-phy-apq8064
+ enum:
+ - qcom,usb-hs-phy-apq8064
+ - qcom,usb-hs-phy-msm8960
then:
properties:
resets:
@@ -40,6 +42,7 @@ properties:
- qcom,usb-hs-phy-apq8064
- qcom,usb-hs-phy-msm8226
- qcom,usb-hs-phy-msm8916
+ - qcom,usb-hs-phy-msm8960
- qcom,usb-hs-phy-msm8974
- const: qcom,usb-hs-phy
diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
index a26524b7e7b7..0f200e3f97a9 100644
--- a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
@@ -20,6 +20,7 @@ properties:
- qcom,usb-snps-femto-v2-phy
- items:
- enum:
+ - qcom,sa8775p-usb-hs-phy
- qcom,sc8280xp-usb-hs-phy
- const: qcom,usb-snps-hs-5nm-phy
- items:
diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
index e2b861ce16d8..774c3c269c40 100644
--- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
@@ -37,7 +37,8 @@ right representation of the pin.
Optional properties:
- GENERIC_PINCONFIG: generic pinconfig options to use:
- bias-disable, bias-pull-down, bias-pull-up, drive-open-drain,
- input-schmitt-enable, input-debounce, output-low, output-high.
+ drive-push-pull input-schmitt-enable, input-debounce, output-low,
+ output-high.
- for microchip,sama7g5-pinctrl only:
- slew-rate: 0 - disabled, 1 - enabled (default)
- atmel,drive-strength: 0 or 1 for low drive, 2 for medium drive and 3 for
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml
new file mode 100644
index 000000000000..f3deda9f7127
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra234-pinmux-aon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra234 AON Pinmux Controller
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jon Hunter <jonathanh@nvidia.com>
+
+$ref: nvidia,tegra234-pinmux-common.yaml
+
+properties:
+ compatible:
+ const: nvidia,tegra234-pinmux-aon
+
+patternProperties:
+ "^pinmux(-[a-z0-9-]+)?$":
+ type: object
+
+ # pin groups
+ additionalProperties:
+ properties:
+ nvidia,pins:
+ items:
+ enum: [ can0_dout_paa0, can0_din_paa1, can1_dout_paa2,
+ can1_din_paa3, can0_stb_paa4, can0_en_paa5,
+ soc_gpio49_paa6, can0_err_paa7, can1_stb_pbb0,
+ can1_en_pbb1, soc_gpio50_pbb2, can1_err_pbb3,
+ spi2_sck_pcc0, spi2_miso_pcc1, spi2_mosi_pcc2,
+ spi2_cs0_pcc3, touch_clk_pcc4, uart3_tx_pcc5,
+ uart3_rx_pcc6, gen2_i2c_scl_pcc7, gen2_i2c_sda_pdd0,
+ gen8_i2c_scl_pdd1, gen8_i2c_sda_pdd2,
+ sce_error_pee0, vcomp_alert_pee1,
+ ao_retention_n_pee2, batt_oc_pee3, power_on_pee4,
+ soc_gpio26_pee5, soc_gpio27_pee6, bootv_ctl_n_pee7,
+ hdmi_cec_pgg0,
+ # drive groups
+ drive_touch_clk_pcc4, drive_uart3_rx_pcc6,
+ drive_uart3_tx_pcc5, drive_gen8_i2c_sda_pdd2,
+ drive_gen8_i2c_scl_pdd1, drive_spi2_mosi_pcc2,
+ drive_gen2_i2c_scl_pcc7, drive_spi2_cs0_pcc3,
+ drive_gen2_i2c_sda_pdd0, drive_spi2_sck_pcc0,
+ drive_spi2_miso_pcc1, drive_can1_dout_paa2,
+ drive_can1_din_paa3, drive_can0_dout_paa0,
+ drive_can0_din_paa1, drive_can0_stb_paa4,
+ drive_can0_en_paa5, drive_soc_gpio49_paa6,
+ drive_can0_err_paa7, drive_can1_stb_pbb0,
+ drive_can1_en_pbb1, drive_soc_gpio50_pbb2,
+ drive_can1_err_pbb3, drive_sce_error_pee0,
+ drive_batt_oc_pee3, drive_bootv_ctl_n_pee7,
+ drive_power_on_pee4, drive_soc_gpio26_pee5,
+ drive_soc_gpio27_pee6, drive_ao_retention_n_pee2,
+ drive_vcomp_alert_pee1, drive_hdmi_cec_pgg0 ]
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/pinctrl/pinctrl-tegra.h>
+
+ pinmux@c300000 {
+ compatible = "nvidia,tegra234-pinmux-aon";
+ reg = <0xc300000 0x4000>;
+
+ pinctrl-names = "cec";
+ pinctrl-0 = <&cec_state>;
+
+ cec_state: pinmux-cec {
+ cec {
+ nvidia,pins = "hdmi_cec_pgg0";
+ nvidia,function = "gp";
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-common.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-common.yaml
new file mode 100644
index 000000000000..4f9de78085e5
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-common.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra234-pinmux-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra234 Pinmux Controller
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+ reg:
+ items:
+ - description: pinmux registers
+
+patternProperties:
+ "^pinmux(-[a-z0-9-]+)?$":
+ type: object
+
+ # pin groups
+ additionalProperties:
+ $ref: nvidia,tegra-pinmux-common.yaml
+ # We would typically use unevaluatedProperties here but that has the
+ # downside that all the properties in the common bindings become valid
+ # for all chip generations. In this case, however, we want the per-SoC
+ # bindings to be able to override which of the common properties are
+ # allowed, since not all pinmux generations support the same sets of
+ # properties. This way, the common bindings define the format of the
+ # properties but the per-SoC bindings define which of them apply to a
+ # given chip.
+ additionalProperties: false
+ properties:
+ nvidia,function:
+ enum: [ gp, uartc, i2c8, spi2, i2c2, can1, can0, rsvd0, eth0, eth2,
+ eth1, dp, eth3, i2c4, i2c7, i2c9, eqos, pe2, pe1, pe0, pe3,
+ pe4, pe5, pe6, pe7, pe8, pe9, pe10, qspi0, qspi1, qpsi,
+ sdmmc1, sce, soc, gpio, hdmi, ufs0, spi3, spi1, uartb, uarte,
+ usb, extperiph2, extperiph1, i2c3, vi0, i2c5, uarta, uartd,
+ i2c1, i2s4, i2s6, aud, spi5, touch, uartj, rsvd1, wdt, tsc,
+ dmic3, led, vi0_alt, i2s5, nv, extperiph3, extperiph4, spi4,
+ ccla, i2s1, i2s2, i2s3, i2s8, rsvd2, dmic5, dca, displayb,
+ displaya, vi1, dcb, dmic1, dmic4, i2s7, dmic2, dspk0, rsvd3,
+ tsc_alt, istctrl, vi1_alt, dspk1, igpu ]
+
+ # out of the common properties, only these are allowed for Tegra234
+ nvidia,pins: true
+ nvidia,pull: true
+ nvidia,tristate: true
+ nvidia,schmitt: true
+ nvidia,enable-input: true
+ nvidia,open-drain: true
+ nvidia,lock: true
+ nvidia,drive-type: true
+ nvidia,io-hv: true
+
+ required:
+ - nvidia,pins
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: true
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux.yaml
new file mode 100644
index 000000000000..17b865ecfcda
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra234-pinmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra234 Pinmux Controller
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jon Hunter <jonathanh@nvidia.com>
+
+$ref: nvidia,tegra234-pinmux-common.yaml
+
+properties:
+ compatible:
+ const: nvidia,tegra234-pinmux
+
+patternProperties:
+ "^pinmux(-[a-z0-9-]+)?$":
+ type: object
+
+ # pin groups
+ additionalProperties:
+ properties:
+ nvidia,pins:
+ items:
+ enum: [ dap6_sclk_pa0, dap6_dout_pa1, dap6_din_pa2,
+ dap6_fs_pa3, dap4_sclk_pa4, dap4_dout_pa5,
+ dap4_din_pa6, dap4_fs_pa7, soc_gpio08_pb0,
+ qspi0_sck_pc0, qspi0_cs_n_pc1,
+ qspi0_io0_pc2, qspi0_io1_pc3, qspi0_io2_pc4,
+ qspi0_io3_pc5, qspi1_sck_pc6, qspi1_cs_n_pc7,
+ qspi1_io0_pd0, qspi1_io1_pd1, qspi1_io2_pd2,
+ qspi1_io3_pd3, eqos_txc_pe0, eqos_td0_pe1,
+ eqos_td1_pe2, eqos_td2_pe3, eqos_td3_pe4,
+ eqos_tx_ctl_pe5, eqos_rd0_pe6, eqos_rd1_pe7,
+ eqos_rd2_pf0, eqos_rd3_pf1, eqos_rx_ctl_pf2,
+ eqos_rxc_pf3, eqos_sma_mdio_pf4, eqos_sma_mdc_pf5,
+ soc_gpio13_pg0, soc_gpio14_pg1, soc_gpio15_pg2,
+ soc_gpio16_pg3, soc_gpio17_pg4, soc_gpio18_pg5,
+ soc_gpio19_pg6, soc_gpio20_pg7, soc_gpio21_ph0,
+ soc_gpio22_ph1, soc_gpio06_ph2, uart4_tx_ph3,
+ uart4_rx_ph4, uart4_rts_ph5, uart4_cts_ph6,
+ soc_gpio41_ph7, soc_gpio42_pi0, soc_gpio43_pi1,
+ soc_gpio44_pi2, gen1_i2c_scl_pi3, gen1_i2c_sda_pi4,
+ cpu_pwr_req_pi5, soc_gpio07_pi6,
+ sdmmc1_clk_pj0, sdmmc1_cmd_pj1, sdmmc1_dat0_pj2,
+ sdmmc1_dat1_pj3, sdmmc1_dat2_pj4, sdmmc1_dat3_pj5,
+ pex_l0_clkreq_n_pk0, pex_l0_rst_n_pk1,
+ pex_l1_clkreq_n_pk2, pex_l1_rst_n_pk3,
+ pex_l2_clkreq_n_pk4, pex_l2_rst_n_pk5,
+ pex_l3_clkreq_n_pk6, pex_l3_rst_n_pk7,
+ pex_l4_clkreq_n_pl0, pex_l4_rst_n_pl1,
+ pex_wake_n_pl2, soc_gpio34_pl3, dp_aux_ch0_hpd_pm0,
+ dp_aux_ch1_hpd_pm1, dp_aux_ch2_hpd_pm2,
+ dp_aux_ch3_hpd_pm3, soc_gpio55_pm4, soc_gpio36_pm5,
+ soc_gpio53_pm6, soc_gpio38_pm7, dp_aux_ch3_n_pn0,
+ soc_gpio39_pn1, soc_gpio40_pn2, dp_aux_ch1_p_pn3,
+ dp_aux_ch1_n_pn4, dp_aux_ch2_p_pn5, dp_aux_ch2_n_pn6,
+ dp_aux_ch3_p_pn7, extperiph1_clk_pp0,
+ extperiph2_clk_pp1, cam_i2c_scl_pp2, cam_i2c_sda_pp3,
+ soc_gpio23_pp4, soc_gpio24_pp5, soc_gpio25_pp6,
+ pwr_i2c_scl_pp7, pwr_i2c_sda_pq0, soc_gpio28_pq1,
+ soc_gpio29_pq2, soc_gpio30_pq3, soc_gpio31_pq4,
+ soc_gpio32_pq5, soc_gpio33_pq6, soc_gpio35_pq7,
+ soc_gpio37_pr0, soc_gpio56_pr1, uart1_tx_pr2,
+ uart1_rx_pr3, uart1_rts_pr4, uart1_cts_pr5,
+ soc_gpio61_pw0, soc_gpio62_pw1, gpu_pwr_req_px0,
+ cv_pwr_req_px1, gp_pwm2_px2, gp_pwm3_px3, uart2_tx_px4,
+ uart2_rx_px5, uart2_rts_px6, uart2_cts_px7, spi3_sck_py0,
+ spi3_miso_py1, spi3_mosi_py2, spi3_cs0_py3,
+ spi3_cs1_py4, uart5_tx_py5, uart5_rx_py6,
+ uart5_rts_py7, uart5_cts_pz0, usb_vbus_en0_pz1,
+ usb_vbus_en1_pz2, spi1_sck_pz3, spi1_miso_pz4,
+ spi1_mosi_pz5, spi1_cs0_pz6, spi1_cs1_pz7,
+ spi5_sck_pac0, spi5_miso_pac1, spi5_mosi_pac2,
+ spi5_cs0_pac3, soc_gpio57_pac4, soc_gpio58_pac5,
+ soc_gpio59_pac6, soc_gpio60_pac7, soc_gpio45_pad0,
+ soc_gpio46_pad1, soc_gpio47_pad2, soc_gpio48_pad3,
+ ufs0_ref_clk_pae0, ufs0_rst_n_pae1,
+ pex_l5_clkreq_n_paf0, pex_l5_rst_n_paf1,
+ pex_l6_clkreq_n_paf2, pex_l6_rst_n_paf3,
+ pex_l7_clkreq_n_pag0, pex_l7_rst_n_pag1,
+ pex_l8_clkreq_n_pag2, pex_l8_rst_n_pag3,
+ pex_l9_clkreq_n_pag4, pex_l9_rst_n_pag5,
+ pex_l10_clkreq_n_pag6, pex_l10_rst_n_pag7,
+ sdmmc1_comp, eqos_comp, qspi_comp,
+ # drive groups
+ drive_soc_gpio08_pb0, drive_soc_gpio36_pm5,
+ drive_soc_gpio53_pm6, drive_soc_gpio55_pm4,
+ drive_soc_gpio38_pm7, drive_soc_gpio39_pn1,
+ drive_soc_gpio40_pn2, drive_dp_aux_ch0_hpd_pm0,
+ drive_dp_aux_ch1_hpd_pm1, drive_dp_aux_ch2_hpd_pm2,
+ drive_dp_aux_ch3_hpd_pm3, drive_dp_aux_ch1_p_pn3,
+ drive_dp_aux_ch1_n_pn4, drive_dp_aux_ch2_p_pn5,
+ drive_dp_aux_ch2_n_pn6, drive_dp_aux_ch3_p_pn7,
+ drive_dp_aux_ch3_n_pn0, drive_pex_l2_clkreq_n_pk4,
+ drive_pex_wake_n_pl2, drive_pex_l1_clkreq_n_pk2,
+ drive_pex_l1_rst_n_pk3, drive_pex_l0_clkreq_n_pk0,
+ drive_pex_l0_rst_n_pk1, drive_pex_l2_rst_n_pk5,
+ drive_pex_l3_clkreq_n_pk6, drive_pex_l3_rst_n_pk7,
+ drive_pex_l4_clkreq_n_pl0, drive_pex_l4_rst_n_pl1,
+ drive_soc_gpio34_pl3, drive_pex_l5_clkreq_n_paf0,
+ drive_pex_l5_rst_n_paf1, drive_pex_l6_clkreq_n_paf2,
+ drive_pex_l6_rst_n_paf3, drive_pex_l10_clkreq_n_pag6,
+ drive_pex_l10_rst_n_pag7, drive_pex_l7_clkreq_n_pag0,
+ drive_pex_l7_rst_n_pag1, drive_pex_l8_clkreq_n_pag2,
+ drive_pex_l8_rst_n_pag3, drive_pex_l9_clkreq_n_pag4,
+ drive_pex_l9_rst_n_pag5, drive_sdmmc1_clk_pj0,
+ drive_sdmmc1_cmd_pj1, drive_sdmmc1_dat3_pj5,
+ drive_sdmmc1_dat2_pj4, drive_sdmmc1_dat1_pj3,
+ drive_sdmmc1_dat0_pj2 ]
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/pinctrl/pinctrl-tegra.h>
+
+ pinmux@2430000 {
+ compatible = "nvidia,tegra234-pinmux";
+ reg = <0x2430000 0x17000>;
+
+ pinctrl-names = "pex_rst";
+ pinctrl-0 = <&pex_rst_c5_out_state>;
+
+ pex_rst_c5_out_state: pinmux-pex-rst-c5-out {
+ pexrst {
+ nvidia,pins = "pex_l5_rst_n_paf1";
+ nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-tlmm.yaml
new file mode 100644
index 000000000000..fad0118fd521
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-tlmm.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,ipq5018-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm IPQ5018 TLMM pin controller
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+ Top Level Mode Multiplexer pin controller in Qualcomm IPQ5018 SoC.
+
+properties:
+ compatible:
+ const: qcom,ipq5018-tlmm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+ "#interrupt-cells": true
+ gpio-controller: true
+ "#gpio-cells": true
+ gpio-ranges: true
+ wakeup-parent: true
+
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 24
+
+ gpio-line-names:
+ maxItems: 47
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-ipq5018-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-ipq5018-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-ipq5018-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ pattern: "^gpio([0-9]|[1-3][0-9]|4[0-6])$"
+ minItems: 1
+ maxItems: 8
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ enum: [ atest_char, audio_pdm0, audio_pdm1, audio_rxbclk, audio_rxd,
+ audio_rxfsync, audio_rxmclk, audio_txbclk, audio_txd,
+ audio_txfsync, audio_txmclk, blsp0_i2c, blsp0_spi, blsp0_uart0,
+ blsp0_uart1, blsp1_i2c0, blsp1_i2c1, blsp1_spi0, blsp1_spi1,
+ blsp1_uart0, blsp1_uart1, blsp1_uart2, blsp2_i2c0, blsp2_i2c1,
+ blsp2_spi, blsp2_spi0, blsp2_spi1, btss, burn0, burn1, cri_trng,
+ cri_trng0, cri_trng1, cxc_clk, cxc_data, dbg_out, eud_gpio,
+ gcc_plltest, gcc_tlmm, gpio, led0, led2, mac0, mac1, mdc, mdio,
+ pcie0_clk, pcie0_wake, pcie1_clk, pcie1_wake, pll_test,
+ prng_rosc, pwm0, pwm1, pwm2, pwm3, qdss_cti_trig_in_a0,
+ qdss_cti_trig_in_a1, qdss_cti_trig_in_b0, qdss_cti_trig_in_b1,
+ qdss_cti_trig_out_a0, qdss_cti_trig_out_a1,
+ qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, qdss_traceclk_a,
+ qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b,
+ qdss_tracedata_a, qdss_tracedata_b, qspi_clk, qspi_cs,
+ qspi_data, reset_out, sdc1_clk, sdc1_cmd, sdc1_data, wci_txd,
+ wci_rxd, wsa_swrm, wsi_clk3, wsi_data3, wsis_reset, xfem ]
+
+ required:
+ - pins
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ tlmm: pinctrl@1000000 {
+ compatible = "qcom,ipq5018-tlmm";
+ reg = <0x01000000 0x300000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 47>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+ uart-w-state {
+ rx-pins {
+ pins = "gpio33";
+ function = "blsp1_uart1";
+ bias-pull-down;
+ };
+
+ tx-pins {
+ pins = "gpio34";
+ function = "blsp1_uart1";
+ bias-pull-down;
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml
index 673713debac2..e5e9962b2174 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml
@@ -53,6 +53,7 @@ $defs:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
properties:
pins:
@@ -86,19 +87,9 @@ $defs:
rx0, rx1, sdc_clk, sdc_cmd, sdc_data, sdc_rclk, tsens_max,
wci20, wci21, wsa_swrm ]
- bias-pull-down: true
- bias-pull-up: true
- bias-disable: true
- drive-strength: true
- input-enable: true
- output-high: true
- output-low: true
-
required:
- pins
- additionalProperties: false
-
allOf:
- $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
index eaadd5a9a445..8aaf50181cef 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
@@ -49,6 +49,7 @@ properties:
- qcom,pm8921-gpio
- qcom,pm8941-gpio
- qcom,pm8950-gpio
+ - qcom,pm8953-gpio
- qcom,pm8994-gpio
- qcom,pm8998-gpio
- qcom,pma8084-gpio
@@ -175,6 +176,7 @@ allOf:
- qcom,pm8350b-gpio
- qcom,pm8550ve-gpio
- qcom,pm8950-gpio
+ - qcom,pm8953-gpio
- qcom,pmi632-gpio
then:
properties:
@@ -434,6 +436,7 @@ $defs:
- gpio1-gpio44 for pm8921
- gpio1-gpio36 for pm8941
- gpio1-gpio8 for pm8950 (hole on gpio3)
+ - gpio1-gpio8 for pm8953 (hole on gpio3 and gpio6)
- gpio1-gpio22 for pm8994
- gpio1-gpio26 for pm8998
- gpio1-gpio22 for pma8084
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml
index 032763649336..c323f6d495a4 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml
@@ -45,6 +45,7 @@ $defs:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
properties:
pins:
@@ -81,19 +82,9 @@ $defs:
uim2_data, uim2_present, uim2_reset, usb_phy, vfr_1,
vsense_trigger, wlan1_adc0, wlan1_adc1 ]
- bias-pull-down: true
- bias-pull-up: true
- bias-disable: true
- drive-strength: true
- input-enable: true
- output-high: true
- output-low: true
-
required:
- pins
- additionalProperties: false
-
allOf:
- $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml
index e608a4f1bcae..e119a226a4b1 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml
@@ -87,7 +87,7 @@ $defs:
emac0_mdc, emac0_mdio, emac0_ptp_aux, emac0_ptp_pps, emac1_mcg0,
emac1_mcg1, emac1_mcg2, emac1_mcg3, emac1_mdc, emac1_mdio,
emac1_ptp_aux, emac1_ptp_pps, gcc_gp1, gcc_gp2, gcc_gp3,
- gcc_gp4, gcc_gp5, hs0_mi2s, hs1_mi2s, hs2_mi2s, ibi_i3c,
+ gcc_gp4, gcc_gp5, gpio, hs0_mi2s, hs1_mi2s, hs2_mi2s, ibi_i3c,
jitter_bist, mdp0_vsync0, mdp0_vsync1, mdp0_vsync2, mdp0_vsync3,
mdp0_vsync4, mdp0_vsync5, mdp0_vsync6, mdp0_vsync7, mdp0_vsync8,
mdp1_vsync0, mdp1_vsync1, mdp1_vsync2, mdp1_vsync3, mdp1_vsync4,
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml
index 4ae39fc7894a..4bd6d7977d3e 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml
@@ -55,6 +55,7 @@ $defs:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
properties:
pins:
@@ -104,20 +105,9 @@ $defs:
usb1_phy, usb1_sbrx, usb1_sbtx, usb1_usb4, usb2phy_ac,
vsense_trigger ]
- bias-bus-hold: true
- bias-disable: true
- bias-pull-down: true
- bias-pull-up: true
- drive-strength: true
- input-enable: true
- output-high: true
- output-low: true
-
required:
- pins
- additionalProperties: false
-
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml
index 2ef793ae4038..27319782d94b 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml
@@ -85,7 +85,7 @@ $defs:
qdss_tracectl_a, dac_calib13, qdss_traceclk_a, dac_calib14,
dac_calib15, hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem,
dac_calib17, hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto,
- dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0,
+ dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0, pcie_clkreq,
dac_calib22, dac_calib23, dac_calib24, tsif1_sync, dac_calib25,
sd_write, tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2,
qdss_cti, blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3, blsp_i2c3,
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx75-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx75-tlmm.yaml
new file mode 100644
index 000000000000..7cb96aa75b08
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx75-tlmm.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sdx75-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SDX75 TLMM block
+
+maintainers:
+ - Rohit Agarwal <quic_rohiagar@quicinc.com>
+
+description:
+ Top Level Mode Multiplexer pin controller in Qualcomm SDX75 SoC.
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sdx75-tlmm
+
+ reg:
+ maxItems: 1
+
+ interrupts: true
+ interrupt-controller: true
+ "#interrupt-cells": true
+ gpio-controller: true
+
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 67
+
+ gpio-line-names:
+ maxItems: 133
+
+ "#gpio-cells": true
+ gpio-ranges: true
+ wakeup-parent: true
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-sdx75-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-sdx75-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-sdx75-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-2][0-9]|13[0-2])$"
+ - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk, sdc2_cmd, sdc2_data ]
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+ enum: [ adsp_ext, atest_char, audio_ref_clk, bimc_dte, char_exec, coex_uart2,
+ coex_uart, cri_trng, cri_trng0, cri_trng1, dbg_out_clk, ddr_bist,
+ ddr_pxi0, ebi0_wrcdc, ebi2_a, ebi2_lcd, ebi2_lcd_te, emac0_mcg,
+ emac0_ptp, emac1_mcg, emac1_ptp, emac_cdc, emac_pps_in, eth0_mdc,
+ eth0_mdio, eth1_mdc, eth1_mdio, ext_dbg, gcc_125_clk, gcc_gp1_clk,
+ gcc_gp2_clk, gcc_gp3_clk, gcc_plltest, gpio, i2s_mclk, jitter_bist,
+ ldo_en, ldo_update, m_voc, mgpi_clk, native_char, native_tsens,
+ native_tsense, nav_dr_sync, nav_gpio, pa_indicator, pci_e,
+ pcie0_clkreq_n, pcie1_clkreq_n, pcie2_clkreq_n, pll_bist_sync,
+ pll_clk_aux, pll_ref_clk, pri_mi2s, prng_rosc, qdss_cti, qdss_gpio,
+ qlink0_b_en, qlink0_b_req, qlink0_l_en, qlink0_l_req, qlink0_wmss,
+ qlink1_l_en, qlink1_l_req, qlink1_wmss, qup_se0, qup_se1_l2_mira,
+ qup_se1_l2_mirb, qup_se1_l3_mira, qup_se1_l3_mirb, qup_se2, qup_se3,
+ qup_se4, qup_se5, qup_se6, qup_se7, qup_se8, rgmii_rx_ctl, rgmii_rxc,
+ rgmii_rxd, rgmii_tx_ctl, rgmii_txc, rgmii_txd, sd_card, sdc1_tb,
+ sdc2_tb_trig, sec_mi2s, sgmii_phy_intr0_n, sgmii_phy_intr1_n,
+ spmi_coex, spmi_vgi, tgu_ch0_trigout, tmess_prng0, tmess_prng1,
+ tmess_prng2, tmess_prng3, tri_mi2s, uim1_clk, uim1_data, uim1_present,
+ uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset,
+ usb2phy_ac_en, vsense_trigger_mirnat]
+
+ required:
+ - pins
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ tlmm: pinctrl@f100000 {
+ compatible = "qcom,sdx75-tlmm";
+ reg = <0x0f100000 0x300000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 133>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-wo-state {
+ pins = "gpio1";
+ function = "gpio";
+ };
+
+ uart-w-state {
+ rx-pins {
+ pins = "gpio12";
+ function = "qup_se1_l2_mira";
+ bias-disable;
+ };
+
+ tx-pins {
+ pins = "gpio13";
+ function = "qup_se1_l3_mira";
+ bias-disable;
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm7150-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm7150-tlmm.yaml
index a57d44efe5bd..ede0f3acad9c 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm7150-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm7150-tlmm.yaml
@@ -62,6 +62,7 @@ $defs:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
properties:
pins:
@@ -102,19 +103,9 @@ $defs:
wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1, wsa_clk,
wsa_data ]
- bias-pull-down: true
- bias-pull-up: true
- bias-disable: true
- drive-strength: true
- input-enable: true
- output-high: true
- output-low: true
-
required:
- pins
- additionalProperties: false
-
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
index 1ab0f8dde477..2120ef71a78d 100644
--- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
@@ -27,6 +27,8 @@ properties:
- st,stm32mp135-pinctrl
- st,stm32mp157-pinctrl
- st,stm32mp157-z-pinctrl
+ - st,stm32mp257-pinctrl
+ - st,stm32mp257-z-pinctrl
'#address-cells':
const: 1
@@ -56,7 +58,7 @@ properties:
Indicates the SOC package used.
More details in include/dt-bindings/pinctrl/stm32-pinfunc.h
$ref: /schemas/types.yaml#/definitions/uint32
- enum: [1, 2, 4, 8]
+ enum: [0x1, 0x2, 0x4, 0x8, 0x100, 0x400, 0x800]
patternProperties:
'^gpio@[0-9a-f]*$':
diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml
index 598a042850b8..b85f9e36ce4b 100644
--- a/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Xilinx Zynq Pinctrl
maintainers:
- - Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
+ - Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
description: |
Please refer to pinctrl-bindings.txt in this directory for details of the
diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml
index 2722dc7bb03d..24ad0614e61b 100644
--- a/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml
@@ -7,8 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Xilinx ZynqMP Pinctrl
maintainers:
- - Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
- - Rajan Vaja <rajan.vaja@xilinx.com>
+ - Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
description: |
Please refer to pinctrl-bindings.txt in this directory for details of the
diff --git a/Documentation/devicetree/bindings/power/qcom,kpss-acc-v2.yaml b/Documentation/devicetree/bindings/power/qcom,kpss-acc-v2.yaml
index 202a5d51ee88..facaafefb441 100644
--- a/Documentation/devicetree/bindings/power/qcom,kpss-acc-v2.yaml
+++ b/Documentation/devicetree/bindings/power/qcom,kpss-acc-v2.yaml
@@ -21,6 +21,7 @@ properties:
const: qcom,kpss-acc-v2
reg:
+ minItems: 1
items:
- description: Base address and size of the register region
- description: Optional base address and size of the alias register region
diff --git a/Documentation/devicetree/bindings/power/reset/atmel,at91sam9260-shdwc.yaml b/Documentation/devicetree/bindings/power/reset/atmel,at91sam9260-shdwc.yaml
new file mode 100644
index 000000000000..f559a2cfd82e
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/atmel,at91sam9260-shdwc.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/atmel,at91sam9260-shdwc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip AT91 SHDWC Shutdown Controller
+
+maintainers:
+ - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+description: |
+ Microchip AT91 SHDWC shutdown controller controls the power supplies VDDIO
+ and VDDCORE and the wake-up detection on debounced input lines.
+
+properties:
+ compatible:
+ enum:
+ - atmel,at91sam9260-shdwc
+ - atmel,at91sam9rl-shdwc
+ - atmel,at91sam9x5-shdwc
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ atmel,wakeup-mode:
+ description: operation mode of the wakeup mode
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [ none, high, low, any ]
+
+ atmel,wakeup-counter:
+ description: counter on wake-up 0
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 15
+
+ atmel,wakeup-rtt-timer:
+ description: enable real-time timer wake-up
+ type: boolean
+
+ atmel,wakeup-rtc-timer:
+ description: enable real-time clock wake-up
+ type: boolean
+
+required:
+ - compatible
+ - reg
+ - clocks
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: atmel,at91sam9x5-shdwc
+ then:
+ properties:
+ atmel,wakeup-rtt-timer: false
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: atmel,at91sam9260-shdwc
+ then:
+ properties:
+ atmel,wakeup-rtc-timer: false
+
+additionalProperties: false
+
+examples:
+ - |
+ shdwc: poweroff@fffffd10 {
+ compatible = "atmel,at91sam9260-shdwc";
+ reg = <0xfffffd10 0x10>;
+ clocks = <&clk32k>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/power/reset/atmel,sama5d2-shdwc.yaml b/Documentation/devicetree/bindings/power/reset/atmel,sama5d2-shdwc.yaml
new file mode 100644
index 000000000000..8c58e12cdb60
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/atmel,sama5d2-shdwc.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/atmel,sama5d2-shdwc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip AT91 SAMA5D2 SHDWC Shutdown Controller
+
+maintainers:
+ - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+description: |
+ Microchip AT91 SHDWC shutdown controller controls the power supplies VDDIO
+ and VDDCORE and the wake-up detection on debounced input lines.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: microchip,sama7g5-shdwc
+ - const: syscon
+ - enum:
+ - atmel,sama5d2-shdwc
+ - microchip,sam9x60-shdwc
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ debounce-delay-us:
+ description:
+ Minimum wake-up inputs debouncer period in microseconds. It is usually a
+ board-related property.
+
+ atmel,wakeup-rtc-timer:
+ description: enable real-time clock wake-up
+ type: boolean
+
+ atmel,wakeup-rtt-timer:
+ description: enable real-time timer wake-up
+ type: boolean
+
+patternProperties:
+ "^input@[0-15]$":
+ description:
+ Wake-up input nodes. These are usually described in the "board" part of
+ the Device Tree. Note also that input 0 is linked to the wake-up pin and
+ is frequently used.
+ type: object
+ properties:
+ reg:
+ description: contains the wake-up input index
+ minimum: 0
+ maximum: 15
+
+ atmel,wakeup-active-high:
+ description:
+ The corresponding wake-up input described by the child forces the
+ wake-up of the core power supply on a high level. The default is to
+ be active low.
+ type: boolean
+
+ required:
+ - reg
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - clocks
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: atmel,sama5d2-shdwc
+ then:
+ properties:
+ atmel,wakeup-rtt-timer: false
+
+additionalProperties: false
+
+examples:
+ - |
+ shdwc: poweroff@f8048010 {
+ compatible = "atmel,sama5d2-shdwc";
+ reg = <0xf8048010 0x10>;
+ clocks = <&clk32k>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ atmel,wakeup-rtc-timer;
+ debounce-delay-us = <976>;
+
+ input@0 {
+ reg = <0>;
+ };
+
+ input@1 {
+ reg = <1>;
+ atmel,wakeup-active-high;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/power/reset/brcm,bcm21664-resetmgr.txt b/Documentation/devicetree/bindings/power/reset/brcm,bcm21664-resetmgr.txt
deleted file mode 100644
index 93f31ca1ef4b..000000000000
--- a/Documentation/devicetree/bindings/power/reset/brcm,bcm21664-resetmgr.txt
+++ /dev/null
@@ -1,14 +0,0 @@
-Broadcom Kona Family Reset Manager
-----------------------------------
-
-The reset manager is used on the Broadcom BCM21664 SoC.
-
-Required properties:
- - compatible: brcm,bcm21664-resetmgr
- - reg: memory address & range
-
-Example:
- brcm,resetmgr@35001f00 {
- compatible = "brcm,bcm21664-resetmgr";
- reg = <0x35001f00 0x24>;
- };
diff --git a/Documentation/devicetree/bindings/power/reset/brcm,bcm21664-resetmgr.yaml b/Documentation/devicetree/bindings/power/reset/brcm,bcm21664-resetmgr.yaml
new file mode 100644
index 000000000000..3e28a59d718f
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/brcm,bcm21664-resetmgr.yaml
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/brcm,bcm21664-resetmgr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Kona family reset manager
+
+maintainers:
+ - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+ compatible:
+ const: brcm,bcm21664-resetmgr
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ reset-controller@35001f00 {
+ compatible = "brcm,bcm21664-resetmgr";
+ reg = <0x35001f00 0x24>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.txt b/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.txt
deleted file mode 100644
index 752d6126d5da..000000000000
--- a/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-NVMEM reboot mode driver
-
-This driver gets reboot mode magic value from reboot-mode driver
-and stores it in a NVMEM cell named "reboot-mode". Then the bootloader
-can read it and take different action according to the magic
-value stored.
-
-Required properties:
-- compatible: should be "nvmem-reboot-mode".
-- nvmem-cells: A phandle to the reboot mode provided by a nvmem device.
-- nvmem-cell-names: Should be "reboot-mode".
-
-The rest of the properties should follow the generic reboot-mode description
-found in reboot-mode.txt
-
-Example:
- reboot-mode {
- compatible = "nvmem-reboot-mode";
- nvmem-cells = <&reboot_mode>;
- nvmem-cell-names = "reboot-mode";
-
- mode-normal = <0xAAAA5501>;
- mode-bootloader = <0xBBBB5500>;
- mode-recovery = <0xCCCC5502>;
- mode-test = <0xDDDD5503>;
- };
diff --git a/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.yaml b/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.yaml
new file mode 100644
index 000000000000..14a262bcbf7c
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/nvmem-reboot-mode.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic NVMEM reboot mode
+
+maintainers:
+ - Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
+
+description:
+ This driver gets the reboot mode magic value from the reboot-mode driver
+ and stores it in the NVMEM cell named "reboot-mode". The bootloader can
+ then read it and take different action according to the value.
+
+properties:
+ compatible:
+ const: nvmem-reboot-mode
+
+ nvmem-cells:
+ description:
+ A phandle pointing to the nvmem-cells node where the vendor-specific
+ magic value representing the reboot mode is stored.
+ maxItems: 1
+
+ nvmem-cell-names:
+ items:
+ - const: reboot-mode
+
+patternProperties:
+ "^mode-.+":
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Vendor-specific mode value written to the mode register
+
+required:
+ - compatible
+ - nvmem-cells
+ - nvmem-cell-names
+
+additionalProperties: false
+
+examples:
+ - |
+ reboot-mode {
+ compatible = "nvmem-reboot-mode";
+ nvmem-cells = <&reboot_reason>;
+ nvmem-cell-names = "reboot-mode";
+ mode-recovery = <0x01>;
+ mode-bootloader = <0x02>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
index d96170eecbd2..5e460128b0d1 100644
--- a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
+++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
@@ -19,6 +19,7 @@ properties:
compatible:
enum:
- qcom,pm8916-pon
+ - qcom,pm8941-pon
- qcom,pms405-pon
- qcom,pm8998-pon
- qcom,pmk8350-pon
@@ -56,7 +57,6 @@ required:
unevaluatedProperties: false
allOf:
- - $ref: reboot-mode.yaml#
- if:
properties:
compatible:
@@ -66,12 +66,30 @@ allOf:
- qcom,pms405-pon
- qcom,pm8998-pon
then:
+ allOf:
+ - $ref: reboot-mode.yaml#
+
+ properties:
+ reg:
+ maxItems: 1
+ reg-names:
+ items:
+ - const: pon
+
+ # Special case for pm8941, which doesn't store reset mode
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: qcom,pm8941-pon
+ then:
properties:
reg:
maxItems: 1
reg-names:
items:
- const: pon
+
- if:
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/power/reset/restart-handler.yaml b/Documentation/devicetree/bindings/power/reset/restart-handler.yaml
index 1f9a2aac53c0..f2ffdd29d52a 100644
--- a/Documentation/devicetree/bindings/power/reset/restart-handler.yaml
+++ b/Documentation/devicetree/bindings/power/reset/restart-handler.yaml
@@ -4,7 +4,7 @@
$id: http://devicetree.org/schemas/power/reset/restart-handler.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Restart and shutdown handler generic binding
+title: Restart and shutdown handler Common Properties
maintainers:
- Sebastian Reichel <sre@kernel.org>
diff --git a/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.yaml b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.yaml
index 11f1f98c1cdc..45792e216981 100644
--- a/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.yaml
+++ b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Xilinx Zynq MPSoC Power Management
maintainers:
- - Michal Simek <michal.simek@xilinx.com>
+ - Michal Simek <michal.simek@amd.com>
description: |
The zynqmp-power node describes the power management configurations.
diff --git a/Documentation/devicetree/bindings/power/supply/bq256xx.yaml b/Documentation/devicetree/bindings/power/supply/bq256xx.yaml
index 82f382a7ffb3..4fe9c3705265 100644
--- a/Documentation/devicetree/bindings/power/supply/bq256xx.yaml
+++ b/Documentation/devicetree/bindings/power/supply/bq256xx.yaml
@@ -68,11 +68,29 @@ properties:
Interrupt sends an active low, 256 μs pulse to host to report the charger
device status and faults.
+ ti,no-thermistor:
+ type: boolean
+ description: Indicates that no thermistor is connected to the TS pin
+
required:
- compatible
- reg
- monitored-battery
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - ti,bq25600
+ - ti,bq25601
+ - ti,bq25600d
+ - ti,bq25601d
+ then:
+ properties:
+ ti,no-thermistor: false
+
additionalProperties: false
examples:
diff --git a/Documentation/devicetree/bindings/power/supply/qcom,pmi8998-charger.yaml b/Documentation/devicetree/bindings/power/supply/qcom,pmi8998-charger.yaml
new file mode 100644
index 000000000000..277c47e048b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/qcom,pmi8998-charger.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/qcom,pmi8998-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PMI8998/PM660 Switch-Mode Battery Charger "2"
+
+maintainers:
+ - Caleb Connolly <caleb.connolly@linaro.org>
+
+properties:
+ compatible:
+ enum:
+ - qcom,pmi8998-charger
+ - qcom,pm660-charger
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 4
+
+ interrupt-names:
+ items:
+ - const: usb-plugin
+ - const: bat-ov
+ - const: wdog-bark
+ - const: usbin-icl-change
+
+ io-channels:
+ items:
+ - description: USB in current in uA
+ - description: USB in voltage in uV
+
+ io-channel-names:
+ items:
+ - const: usbin_i
+ - const: usbin_v
+
+ monitored-battery:
+ description: phandle to the simple-battery node
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+ - io-channels
+ - io-channel-names
+ - monitored-battery
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ pmic {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <4>;
+
+ charger@1000 {
+ compatible = "qcom,pmi8998-charger";
+ reg = <0x1000>;
+
+ interrupts = <0x2 0x12 0x2 IRQ_TYPE_EDGE_BOTH>,
+ <0x2 0x13 0x4 IRQ_TYPE_EDGE_BOTH>,
+ <0x2 0x13 0x6 IRQ_TYPE_EDGE_RISING>,
+ <0x2 0x16 0x1 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "usb-plugin", "bat-ov", "wdog-bark", "usbin-icl-change";
+
+ io-channels = <&pmi8998_rradc 3>,
+ <&pmi8998_rradc 4>;
+ io-channel-names = "usbin_i",
+ "usbin_v";
+
+ monitored-battery = <&battery>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt5033-battery.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt5033-battery.yaml
index 756c16d1727d..b5d8888d03d2 100644
--- a/Documentation/devicetree/bindings/power/supply/richtek,rt5033-battery.yaml
+++ b/Documentation/devicetree/bindings/power/supply/richtek,rt5033-battery.yaml
@@ -26,7 +26,7 @@ required:
- compatible
- reg
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt5033-charger.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt5033-charger.yaml
new file mode 100644
index 000000000000..5b3edd79a523
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/richtek,rt5033-charger.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/richtek,rt5033-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT5033 PMIC Battery Charger
+
+maintainers:
+ - Jakob Hauser <jahau@rocketmail.com>
+
+description:
+ The battery charger of the multifunction device RT5033 has to be instantiated
+ under sub-node named "charger" using the following format.
+
+properties:
+ compatible:
+ const: richtek,rt5033-charger
+
+ monitored-battery:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: |
+ Phandle to the monitored battery according to battery.yaml. The battery
+ node needs to contain five parameters.
+
+ precharge-current-microamp:
+ Current of pre-charge mode. The pre-charge current levels are 350 mA
+ to 650 mA programmed by I2C per 100 mA.
+
+ constant-charge-current-max-microamp:
+ Current of fast-charge mode. The fast-charge current levels are 700 mA
+ to 2000 mA programmed by I2C per 100 mA.
+
+ charge-term-current-microamp:
+ This property is end of charge current. Its level ranges from 150 mA
+ to 600 mA. Between 150 mA and 300 mA in 50 mA steps, between 300 mA and
+ 600 mA in 100 mA steps.
+
+ precharge-upper-limit-microvolt:
+ Voltage of pre-charge mode. If the battery voltage is below the pre-charge
+ threshold voltage, the charger is in pre-charge mode with pre-charge
+ current. Its levels are 2.3 V to 3.8 V programmed by I2C per 0.1 V.
+
+ constant-charge-voltage-max-microvolt:
+ Battery regulation voltage of constant voltage mode. This voltage levels
+ from 3.65 V to 4.4 V by I2C per 0.025 V.
+
+ richtek,usb-connector:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle to a USB connector according to usb-connector.yaml. The connector
+ should be a child of the extcon device.
+
+required:
+ - monitored-battery
+
+additionalProperties: false
+
+examples:
+ - |
+ charger {
+ compatible = "richtek,rt5033-charger";
+ monitored-battery = <&battery>;
+ richtek,usb-connector = <&usb_con>;
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml
index 3ce648dd91bd..34b7959d6772 100644
--- a/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml
+++ b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml
@@ -22,6 +22,7 @@ properties:
compatible:
oneOf:
- enum:
+ - x-powers,axp192-usb-power-supply
- x-powers,axp202-usb-power-supply
- x-powers,axp221-usb-power-supply
- x-powers,axp223-usb-power-supply
diff --git a/Documentation/devicetree/bindings/pwm/atmel,at91sam-pwm.yaml b/Documentation/devicetree/bindings/pwm/atmel,at91sam-pwm.yaml
index ab45df80345d..d84268b59784 100644
--- a/Documentation/devicetree/bindings/pwm/atmel,at91sam-pwm.yaml
+++ b/Documentation/devicetree/bindings/pwm/atmel,at91sam-pwm.yaml
@@ -11,7 +11,7 @@ maintainers:
- Claudiu Beznea <claudiu.beznea@microchip.com>
allOf:
- - $ref: "pwm.yaml#"
+ - $ref: pwm.yaml#
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/pwm/imx-pwm.yaml b/Documentation/devicetree/bindings/pwm/imx-pwm.yaml
index b3da4e629341..c01dff3b7f84 100644
--- a/Documentation/devicetree/bindings/pwm/imx-pwm.yaml
+++ b/Documentation/devicetree/bindings/pwm/imx-pwm.yaml
@@ -43,6 +43,7 @@ properties:
- fsl,imx8mn-pwm
- fsl,imx8mp-pwm
- fsl,imx8mq-pwm
+ - fsl,imx8qxp-pwm
- const: fsl,imx27-pwm
reg:
@@ -61,6 +62,9 @@ properties:
interrupts:
maxItems: 1
+ power-domains:
+ maxItems: 1
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/pwm/mediatek,mt2712-pwm.yaml b/Documentation/devicetree/bindings/pwm/mediatek,mt2712-pwm.yaml
index 8e176ba7a525..0fbe8a6469eb 100644
--- a/Documentation/devicetree/bindings/pwm/mediatek,mt2712-pwm.yaml
+++ b/Documentation/devicetree/bindings/pwm/mediatek,mt2712-pwm.yaml
@@ -22,6 +22,7 @@ properties:
- mediatek,mt7623-pwm
- mediatek,mt7628-pwm
- mediatek,mt7629-pwm
+ - mediatek,mt7981-pwm
- mediatek,mt7986-pwm
- mediatek,mt8183-pwm
- mediatek,mt8365-pwm
diff --git a/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml b/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml
index 0088bc8e7c54..153e146df7d4 100644
--- a/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml
+++ b/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml
@@ -22,7 +22,9 @@ properties:
- mediatek,mt8173-disp-pwm
- mediatek,mt8183-disp-pwm
- items:
- - const: mediatek,mt8167-disp-pwm
+ - enum:
+ - mediatek,mt6795-disp-pwm
+ - mediatek,mt8167-disp-pwm
- const: mediatek,mt8173-disp-pwm
- items:
- enum:
diff --git a/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml b/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml
index a34cbc13f691..6ffbed204c25 100644
--- a/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml
+++ b/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml
@@ -25,7 +25,7 @@ properties:
const: 3
fsl,pwm-number:
- $ref: '/schemas/types.yaml#/definitions/uint32'
+ $ref: /schemas/types.yaml#/definitions/uint32
description: u32 value representing the number of PWM devices
required:
diff --git a/Documentation/devicetree/bindings/pwm/pwm-bcm2835.txt b/Documentation/devicetree/bindings/pwm/pwm-bcm2835.txt
deleted file mode 100644
index f5753b3f79df..000000000000
--- a/Documentation/devicetree/bindings/pwm/pwm-bcm2835.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-BCM2835 PWM controller (Raspberry Pi controller)
-
-Required properties:
-- compatible: should be "brcm,bcm2835-pwm"
-- reg: physical base address and length of the controller's registers
-- clocks: This clock defines the base clock frequency of the PWM hardware
- system, the period and the duty_cycle of the PWM signal is a multiple of
- the base period.
-- #pwm-cells: Should be 3. See pwm.yaml in this directory for a description of
- the cells format.
-
-Examples:
-
-pwm@2020c000 {
- compatible = "brcm,bcm2835-pwm";
- reg = <0x2020c000 0x28>;
- clocks = <&clk_pwm>;
- #pwm-cells = <3>;
-};
-
-clocks {
- ....
- clk_pwm: pwm {
- compatible = "fixed-clock";
- reg = <3>;
- #clock-cells = <0>;
- clock-frequency = <9200000>;
- };
- ....
-};
diff --git a/Documentation/devicetree/bindings/pwm/pwm-bcm2835.yaml b/Documentation/devicetree/bindings/pwm/pwm-bcm2835.yaml
new file mode 100644
index 000000000000..15e7fd98defc
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/pwm-bcm2835.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/pwm-bcm2835.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BCM2835 PWM controller (Raspberry Pi controller)
+
+maintainers:
+ - Stefan Wahren <stefan.wahren@i2se.com>
+
+allOf:
+ - $ref: pwm.yaml#
+
+properties:
+ compatible:
+ const: brcm,bcm2835-pwm
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ "#pwm-cells":
+ const: 3
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - "#pwm-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ pwm@2020c000 {
+ compatible = "brcm,bcm2835-pwm";
+ reg = <0x2020c000 0x28>;
+ clocks = <&clk_pwm>;
+ #pwm-cells = <3>;
+ };
diff --git a/Documentation/devicetree/bindings/pwm/pwm.yaml b/Documentation/devicetree/bindings/pwm/pwm.yaml
index 3c01f85029e5..abd9fa873354 100644
--- a/Documentation/devicetree/bindings/pwm/pwm.yaml
+++ b/Documentation/devicetree/bindings/pwm/pwm.yaml
@@ -13,7 +13,7 @@ select: false
properties:
$nodename:
- pattern: "^pwm(@.*|-[0-9a-f])*$"
+ pattern: "^pwm(@.*|-([0-9]|[1-9][0-9]+))?$"
"#pwm-cells":
description:
diff --git a/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml b/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml
index 4c8097010687..6b6a302a175c 100644
--- a/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml
+++ b/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml
@@ -35,6 +35,7 @@ properties:
- renesas,pwm-r8a77980 # R-Car V3H
- renesas,pwm-r8a77990 # R-Car E3
- renesas,pwm-r8a77995 # R-Car D3
+ - renesas,pwm-r8a779a0 # R-Car V3U
- renesas,pwm-r8a779g0 # R-Car V4H
- const: renesas,pwm-rcar
diff --git a/Documentation/devicetree/bindings/regulator/adi,max77541-regulator.yaml b/Documentation/devicetree/bindings/regulator/adi,max77541-regulator.yaml
new file mode 100644
index 000000000000..9e36d5467b56
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/adi,max77541-regulator.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/adi,max77541-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Buck Converter for MAX77540/MAX77541
+
+maintainers:
+ - Okan Sahin <okan.sahin@analog.com>
+
+description: |
+ This is a part of device tree bindings for ADI MAX77540/MAX77541
+
+ The buck converter is represented as a sub-node of the PMIC node on the device tree.
+
+ The device has two buck regulators.
+ See also Documentation/devicetree/bindings/mfd/adi,max77541.yaml for
+ additional information and example.
+
+patternProperties:
+ "^buck[12]$":
+ type: object
+ $ref: regulator.yaml#
+ additionalProperties: false
+ description: |
+ Buck regulator.
+
+ properties:
+ regulator-name: true
+ regulator-always-on: true
+ regulator-boot-on: true
+ regulator-min-microvolt:
+ minimum: 300000
+ regulator-max-microvolt:
+ maximum: 5200000
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt
index 7034cdca54e0..b6384306db5c 100644
--- a/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt
@@ -8,15 +8,14 @@ Documentation/devicetree/bindings/regulator/regulator.txt.
The valid names for regulators are::
BUCK:
- buck_vdram1, buck_vcore, buck_vcore_sshub, buck_vpa, buck_vproc11,
- buck_vproc12, buck_vgpu, buck_vs2, buck_vmodem, buck_vs1
+ buck_vdram1, buck_vcore, buck_vpa, buck_vproc11, buck_vproc12, buck_vgpu,
+ buck_vs2, buck_vmodem, buck_vs1
LDO:
ldo_vdram2, ldo_vsim1, ldo_vibr, ldo_vrf12, ldo_vio18, ldo_vusb, ldo_vcamio,
ldo_vcamd, ldo_vcn18, ldo_vfe28, ldo_vsram_proc11, ldo_vcn28, ldo_vsram_others,
- ldo_vsram_others_sshub, ldo_vsram_gpu, ldo_vxo22, ldo_vefuse, ldo_vaux18,
- ldo_vmch, ldo_vbif28, ldo_vsram_proc12, ldo_vcama1, ldo_vemc, ldo_vio28, ldo_va12,
- ldo_vrf18, ldo_vcn33_bt, ldo_vcn33_wifi, ldo_vcama2, ldo_vmc, ldo_vldo28, ldo_vaud28,
- ldo_vsim2
+ ldo_vsram_gpu, ldo_vxo22, ldo_vefuse, ldo_vaux18, ldo_vmch, ldo_vbif28,
+ ldo_vsram_proc12, ldo_vcama1, ldo_vemc, ldo_vio28, ldo_va12, ldo_vrf18,
+ ldo_vcn33, ldo_vcama2, ldo_vmc, ldo_vldo28, ldo_vaud28, ldo_vsim2
Example:
@@ -305,15 +304,8 @@ Example:
regulator-enable-ramp-delay = <120>;
};
- mt6358_vcn33_bt_reg: ldo_vcn33_bt {
- regulator-name = "vcn33_bt";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3500000>;
- regulator-enable-ramp-delay = <270>;
- };
-
- mt6358_vcn33_wifi_reg: ldo_vcn33_wifi {
- regulator-name = "vcn33_wifi";
+ mt6358_vcn33_reg: ldo_vcn33 {
+ regulator-name = "vcn33";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3500000>;
regulator-enable-ramp-delay = <270>;
@@ -354,17 +346,5 @@ Example:
regulator-max-microvolt = <3100000>;
regulator-enable-ramp-delay = <540>;
};
-
- mt6358_vcore_sshub_reg: buck_vcore_sshub {
- regulator-name = "vcore_sshub";
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1293750>;
- };
-
- mt6358_vsram_others_sshub_reg: ldo_vsram_others_sshub {
- regulator-name = "vsram_others_sshub";
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1293750>;
- };
};
};
diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.yaml b/Documentation/devicetree/bindings/regulator/pfuze100.yaml
index 67a30b23b92c..e384e4953f0a 100644
--- a/Documentation/devicetree/bindings/regulator/pfuze100.yaml
+++ b/Documentation/devicetree/bindings/regulator/pfuze100.yaml
@@ -36,6 +36,9 @@ properties:
reg:
maxItems: 1
+ interrupts:
+ maxItems: 1
+
fsl,pfuze-support-disable-sw:
$ref: /schemas/types.yaml#/definitions/flag
description: |
diff --git a/Documentation/devicetree/bindings/regulator/pwm-regulator.yaml b/Documentation/devicetree/bindings/regulator/pwm-regulator.yaml
index 7e58471097f8..80ecf938b749 100644
--- a/Documentation/devicetree/bindings/regulator/pwm-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/pwm-regulator.yaml
@@ -64,6 +64,7 @@ properties:
defined, <100> is assumed, meaning that
pwm-dutycycle-range contains values expressed in
percent.
+ $ref: /schemas/types.yaml#/definitions/uint32
default: 100
pwm-dutycycle-range:
diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpm-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpm-regulator.yaml
index 8a08698e3484..b4eb4001eb3d 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,rpm-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/qcom,rpm-regulator.yaml
@@ -49,7 +49,7 @@ patternProperties:
".*-supply$":
description: Input supply phandle(s) for this node
- "^((s|l|lvs)[0-9]*)|(s[1-2][a-b])|(ncp)|(mvs)|(usb-switch)|(hdmi-switch)$":
+ "^((s|l|lvs)[0-9]*|s[1-2][a-b]|ncp|mvs|usb-switch|hdmi-switch)$":
description: List of regulators and its properties
$ref: regulator.yaml#
unevaluatedProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml
index b1cff3adb21b..89c564dfa5db 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml
@@ -14,6 +14,9 @@ description: |
regulator will be enabled in situations where the device is required to
provide power to the connected peripheral.
+allOf:
+ - $ref: regulator.yaml#
+
properties:
compatible:
enum:
@@ -25,8 +28,11 @@ properties:
required:
- compatible
+ - reg
+ - regulator-min-microamp
+ - regulator-max-microamp
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
@@ -36,6 +42,8 @@ examples:
pm8150b_vbus: usb-vbus-regulator@1100 {
compatible = "qcom,pm8150b-vbus-reg";
reg = <0x1100>;
+ regulator-min-microamp = <500000>;
+ regulator-max-microamp = <3000000>;
};
};
...
diff --git a/Documentation/devicetree/bindings/regulator/renesas,raa215300.yaml b/Documentation/devicetree/bindings/regulator/renesas,raa215300.yaml
new file mode 100644
index 000000000000..97cff71d2967
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/renesas,raa215300.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/renesas,raa215300.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RAA215300 Power Management Integrated Circuit (PMIC)
+
+maintainers:
+ - Biju Das <biju.das.jz@bp.renesas.com>
+
+description: |
+ The RAA215300 is a high-performance, low-cost 9-channel PMIC designed for
+ 32-bit and 64-bit MCU and MPU applications. It supports DDR3, DDR3L, DDR4,
+ and LPDDR4 memory power requirements. The internally compensated regulators,
+ built-in Real-Time Clock (RTC), 32kHz crystal oscillator, and coin cell
+ battery charger provide a highly integrated, small footprint power solution
+ ideal for System-On-Module (SOM) applications. A spread spectrum feature
+ provides an ease-of-use solution for noise-sensitive audio or RF applications.
+
+ This device exposes two devices via I2C. One for the integrated RTC IP, and
+ one for everything else.
+
+ Link to datasheet:
+ https://www.renesas.com/in/en/products/power-power-management/multi-channel-power-management-ics-pmics/ssdsoc-power-management-ics-pmic-and-pmus/raa215300-high-performance-9-channel-pmic-supporting-ddr-memory-built-charger-and-rtc
+
+properties:
+ compatible:
+ enum:
+ - renesas,raa215300
+
+ reg:
+ maxItems: 2
+
+ reg-names:
+ items:
+ - const: main
+ - const: rtc
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ description: |
+ The clocks are optional. The RTC is disabled, if no clocks are
+ provided(either xin or clkin).
+ maxItems: 1
+
+ clock-names:
+ description: |
+ Use xin, if connected to an external crystal.
+ Use clkin, if connected to an external clock signal.
+ enum:
+ - xin
+ - clkin
+
+required:
+ - compatible
+ - reg
+ - reg-names
+
+additionalProperties: false
+
+examples:
+ - |
+ /* 32.768kHz crystal */
+ x2: x2-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ raa215300: pmic@12 {
+ compatible = "renesas,raa215300";
+ reg = <0x12>, <0x6f>;
+ reg-names = "main", "rtc";
+
+ clocks = <&x2>;
+ clock-names = "xin";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/ti,tps62870.yaml b/Documentation/devicetree/bindings/regulator/ti,tps62870.yaml
new file mode 100644
index 000000000000..386989544dac
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/ti,tps62870.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/ti,tps62870.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI TPS62870/TPS62871/TPS62872/TPS62873 voltage regulator
+
+maintainers:
+ - Mårten Lindahl <marten.lindahl@axis.com>
+
+allOf:
+ - $ref: regulator.yaml#
+
+properties:
+ compatible:
+ enum:
+ - ti,tps62870
+ - ti,tps62871
+ - ti,tps62872
+ - ti,tps62873
+
+ reg:
+ maxItems: 1
+
+ regulator-initial-mode:
+ enum: [ 1, 2 ]
+ description: 1 - Forced PWM mode, 2 - Low power mode
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ regulator@41 {
+ compatible = "ti,tps62873";
+ reg = <0x41>;
+ regulator-name = "+0.75V";
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1675000>;
+ regulator-initial-mode = <1>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml b/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml
index 3100cb870170..76e8ca44906a 100644
--- a/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml
@@ -75,7 +75,7 @@ additionalProperties: false
examples:
- |
remoteproc@1c {
- compatible= "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc";
+ compatible = "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc";
reg = <0x1c 0x8>, <0x38 0x8>;
reg-names = "remap", "cpu";
resets = <&media_cpu_reset>;
diff --git a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
index 959a56f1b6c7..370af61d8f28 100644
--- a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
@@ -25,7 +25,14 @@ properties:
maxItems: 3
resets:
- maxItems: 1
+ minItems: 1
+ maxItems: 2
+
+ reset-names:
+ items:
+ - const: mcu_rst
+ - const: hold_boot
+ minItems: 1
st,syscfg-holdboot:
description: remote processor reset hold boot
@@ -37,6 +44,7 @@ properties:
- description: The field mask of the hold boot
st,syscfg-tz:
+ deprecated: true
description:
Reference to the system configuration which holds the RCC trust zone mode
$ref: /schemas/types.yaml#/definitions/phandle-array
@@ -135,22 +143,48 @@ required:
- compatible
- reg
- resets
- - st,syscfg-holdboot
- - st,syscfg-tz
+
+allOf:
+ - if:
+ properties:
+ reset-names:
+ not:
+ contains:
+ const: hold_boot
+ then:
+ required:
+ - st,syscfg-holdboot
+ else:
+ properties:
+ st,syscfg-holdboot: false
additionalProperties: false
examples:
- |
#include <dt-bindings/reset/stm32mp1-resets.h>
- m4_rproc: m4@10000000 {
+ m4@10000000 {
compatible = "st,stm32mp1-m4";
reg = <0x10000000 0x40000>,
<0x30000000 0x40000>,
<0x38000000 0x10000>;
resets = <&rcc MCU_R>;
+ reset-names = "mcu_rst";
+ /* Hold boot managed using system config*/
st,syscfg-holdboot = <&rcc 0x10C 0x1>;
- st,syscfg-tz = <&rcc 0x000 0x1>;
+ st,syscfg-rsc-tbl = <&tamp 0x144 0xFFFFFFFF>;
+ st,syscfg-m4-state = <&tamp 0x148 0xFFFFFFFF>;
+ };
+ - |
+ #include <dt-bindings/reset/stm32mp1-resets.h>
+ m4@10000000 {
+ compatible = "st,stm32mp1-m4";
+ reg = <0x10000000 0x40000>,
+ <0x30000000 0x40000>,
+ <0x38000000 0x10000>;
+ /* Hold boot managed using SCMI reset controller */
+ resets = <&scmi MCU_R>, <&scmi MCU_HOLD_BOOT_R>;
+ reset-names = "mcu_rst", "hold_boot";
st,syscfg-rsc-tbl = <&tamp 0x144 0xFFFFFFFF>;
st,syscfg-m4-state = <&tamp 0x148 0xFFFFFFFF>;
};
diff --git a/Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml b/Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml
index c6d86964b72a..35f0bb38f7b2 100644
--- a/Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml
@@ -4,7 +4,7 @@
$id: http://devicetree.org/schemas/remoteproc/ti,pru-consumer.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Common TI PRU Consumer Binding
+title: TI PRU Consumer Common Properties
maintainers:
- Suman Anna <s-anna@ti.com>
diff --git a/Documentation/devicetree/bindings/reserved-memory/framebuffer.yaml b/Documentation/devicetree/bindings/reserved-memory/framebuffer.yaml
index 05b6648b3458..851ec24d6142 100644
--- a/Documentation/devicetree/bindings/reserved-memory/framebuffer.yaml
+++ b/Documentation/devicetree/bindings/reserved-memory/framebuffer.yaml
@@ -4,7 +4,7 @@
$id: http://devicetree.org/schemas/reserved-memory/framebuffer.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: /reserved-memory framebuffer node bindings
+title: /reserved-memory framebuffer node
maintainers:
- devicetree-spec@vger.kernel.org
diff --git a/Documentation/devicetree/bindings/reset/nuvoton,ma35d1-reset.yaml b/Documentation/devicetree/bindings/reset/nuvoton,ma35d1-reset.yaml
new file mode 100644
index 000000000000..34c5c1c08ec1
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/nuvoton,ma35d1-reset.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/nuvoton,ma35d1-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton MA35D1 Reset Controller
+
+maintainers:
+ - Chi-Fang Li <cfli0@nuvoton.com>
+ - Jacky Huang <ychuang3@nuvoton.com>
+
+description:
+ The system reset controller can be used to reset various peripheral
+ controllers in MA35D1 SoC.
+
+properties:
+ compatible:
+ items:
+ - const: nuvoton,ma35d1-reset
+
+ reg:
+ maxItems: 1
+
+ '#reset-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+ # system reset controller node:
+ - |
+
+ system-management@40460000 {
+ compatible = "nuvoton,ma35d1-reset";
+ reg = <0x40460000 0x200>;
+ #reset-cells = <1>;
+ };
+...
+
diff --git a/Documentation/devicetree/bindings/reset/oxnas,reset.txt b/Documentation/devicetree/bindings/reset/oxnas,reset.txt
deleted file mode 100644
index d27ccb5d04fc..000000000000
--- a/Documentation/devicetree/bindings/reset/oxnas,reset.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-Oxford Semiconductor OXNAS SoC Family RESET Controller
-================================================
-
-Please also refer to reset.txt in this directory for common reset
-controller binding usage.
-
-Required properties:
-- compatible: For OX810SE, should be "oxsemi,ox810se-reset"
- For OX820, should be "oxsemi,ox820-reset"
-- #reset-cells: 1, see below
-
-Parent node should have the following properties :
-- compatible: For OX810SE, should be :
- "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd"
- For OX820, should be :
- "oxsemi,ox820-sys-ctrl", "syscon", "simple-mfd"
-
-Reset indices are in dt-bindings include files :
-- For OX810SE: include/dt-bindings/reset/oxsemi,ox810se.h
-- For OX820: include/dt-bindings/reset/oxsemi,ox820.h
-
-example:
-
-sys: sys-ctrl@000000 {
- compatible = "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd";
- reg = <0x000000 0x100000>;
-
- reset: reset-controller {
- compatible = "oxsemi,ox810se-reset";
- #reset-cells = <1>;
- };
-};
diff --git a/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt b/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt
deleted file mode 100644
index ed836868dbf1..000000000000
--- a/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt
+++ /dev/null
@@ -1,55 +0,0 @@
---------------------------------------------------------------------------
- = Zynq UltraScale+ MPSoC and Versal reset driver binding =
---------------------------------------------------------------------------
-The Zynq UltraScale+ MPSoC and Versal has several different resets.
-
-See Chapter 36 of the Zynq UltraScale+ MPSoC TRM (UG) for more information
-about zynqmp resets.
-
-Please also refer to reset.txt in this directory for common reset
-controller binding usage.
-
-Required Properties:
-- compatible: "xlnx,zynqmp-reset" for Zynq UltraScale+ MPSoC platform
- "xlnx,versal-reset" for Versal platform
-- #reset-cells: Specifies the number of cells needed to encode reset
- line, should be 1
-
--------
-Example
--------
-
-firmware {
- zynqmp_firmware: zynqmp-firmware {
- compatible = "xlnx,zynqmp-firmware";
- method = "smc";
-
- zynqmp_reset: reset-controller {
- compatible = "xlnx,zynqmp-reset";
- #reset-cells = <1>;
- };
- };
-};
-
-Specifying reset lines connected to IP modules
-==============================================
-
-Device nodes that need access to reset lines should
-specify them as a reset phandle in their corresponding node as
-specified in reset.txt.
-
-For list of all valid reset indices for Zynq UltraScale+ MPSoC see
-<dt-bindings/reset/xlnx-zynqmp-resets.h>
-For list of all valid reset indices for Versal see
-<dt-bindings/reset/xlnx-versal-resets.h>
-
-Example:
-
-serdes: zynqmp_phy@fd400000 {
- ...
-
- resets = <&zynqmp_reset ZYNQMP_RESET_SATA>;
- reset-names = "sata_rst";
-
- ...
-};
diff --git a/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.yaml b/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.yaml
new file mode 100644
index 000000000000..0d50f6a54af3
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/xlnx,zynqmp-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Zynq UltraScale+ MPSoC and Versal reset
+
+maintainers:
+ - Piyush Mehta <piyush.mehta@amd.com>
+
+description: |
+ The Zynq UltraScale+ MPSoC and Versal has several different resets.
+
+ The PS reset subsystem is responsible for handling the external reset
+ input to the device and that all internal reset requirements are met
+ for the system (as a whole) and for the functional units.
+
+ Please also refer to reset.txt in this directory for common reset
+ controller binding usage. Device nodes that need access to reset
+ lines should specify them as a reset phandle in their corresponding
+ node as specified in reset.txt.
+
+ For list of all valid reset indices for Zynq UltraScale+ MPSoC
+ <dt-bindings/reset/xlnx-zynqmp-resets.h>
+
+ For list of all valid reset indices for Versal
+ <dt-bindings/reset/xlnx-versal-resets.h>
+
+properties:
+ compatible:
+ enum:
+ - xlnx,zynqmp-reset
+ - xlnx,versal-reset
+
+ "#reset-cells":
+ const: 1
+
+required:
+ - compatible
+ - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ zynqmp_reset: reset-controller {
+ compatible = "xlnx,zynqmp-reset";
+ #reset-cells = <1>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml
index 3d2934b15e80..38c0b5213736 100644
--- a/Documentation/devicetree/bindings/riscv/cpus.yaml
+++ b/Documentation/devicetree/bindings/riscv/cpus.yaml
@@ -23,6 +23,10 @@ description: |
two cores, each of which has two hyperthreads, could be described as
having four harts.
+allOf:
+ - $ref: /schemas/cpu.yaml#
+ - $ref: extensions.yaml
+
properties:
compatible:
oneOf:
@@ -61,7 +65,7 @@ properties:
hart. These values originate from the RISC-V Privileged
Specification document, available from
https://riscv.org/specifications/
- $ref: "/schemas/types.yaml#/definitions/string"
+ $ref: /schemas/types.yaml#/definitions/string
enum:
- riscv,sv32
- riscv,sv39
@@ -79,25 +83,9 @@ properties:
description:
The blocksize in bytes for the Zicboz cache operations.
- riscv,isa:
- description:
- Identifies the specific RISC-V instruction set architecture
- supported by the hart. These are documented in the RISC-V
- User-Level ISA document, available from
- https://riscv.org/specifications/
-
- Due to revisions of the ISA specification, some deviations
- have arisen over time.
- Notably, riscv,isa was defined prior to the creation of the
- Zicsr and Zifencei extensions and thus "i" implies
- "zicsr_zifencei".
-
- While the isa strings in ISA specification are case
- insensitive, letters in the riscv,isa string must be all
- lowercase to simplify parsing.
- $ref: "/schemas/types.yaml#/definitions/string"
- pattern: ^rv(?:64|32)imaf?d?q?c?b?k?j?p?v?h?(?:[hsxz](?:[a-z])+)?(?:_[hsxz](?:[a-z])+)*$
-
+ # RISC-V has multiple properties for cache op block sizes as the sizes
+ # differ between individual CBO extensions
+ cache-op-block-size: false
# RISC-V requires 'timebase-frequency' in /cpus, so disallow it here
timebase-frequency: false
@@ -120,7 +108,7 @@ properties:
- interrupt-controller
cpu-idle-states:
- $ref: '/schemas/types.yaml#/definitions/phandle-array'
+ $ref: /schemas/types.yaml#/definitions/phandle-array
items:
maxItems: 1
description: |
@@ -133,11 +121,20 @@ properties:
DMIPS/MHz, relative to highest capacity-dmips-mhz
in the system.
+anyOf:
+ - required:
+ - riscv,isa
+ - required:
+ - riscv,isa-base
+
+dependencies:
+ riscv,isa-base: [ "riscv,isa-extensions" ]
+ riscv,isa-extensions: [ "riscv,isa-base" ]
+
required:
- - riscv,isa
- interrupt-controller
-additionalProperties: true
+unevaluatedProperties: false
examples:
- |
@@ -154,7 +151,9 @@ examples:
i-cache-sets = <128>;
i-cache-size = <16384>;
reg = <0>;
- riscv,isa = "rv64imac";
+ riscv,isa-base = "rv64i";
+ riscv,isa-extensions = "i", "m", "a", "c";
+
cpu_intc0: interrupt-controller {
#interrupt-cells = <1>;
compatible = "riscv,cpu-intc";
@@ -177,8 +176,10 @@ examples:
i-tlb-size = <32>;
mmu-type = "riscv,sv39";
reg = <1>;
- riscv,isa = "rv64imafdc";
tlb-split;
+ riscv,isa-base = "rv64i";
+ riscv,isa-extensions = "i", "m", "a", "f", "d", "c";
+
cpu_intc1: interrupt-controller {
#interrupt-cells = <1>;
compatible = "riscv,cpu-intc";
@@ -196,8 +197,10 @@ examples:
device_type = "cpu";
reg = <0>;
compatible = "riscv";
- riscv,isa = "rv64imafdc";
mmu-type = "riscv,sv48";
+ riscv,isa-base = "rv64i";
+ riscv,isa-extensions = "i", "m", "a", "f", "d", "c";
+
interrupt-controller {
#interrupt-cells = <1>;
interrupt-controller;
diff --git a/Documentation/devicetree/bindings/riscv/extensions.yaml b/Documentation/devicetree/bindings/riscv/extensions.yaml
new file mode 100644
index 000000000000..cc1f546fdbdc
--- /dev/null
+++ b/Documentation/devicetree/bindings/riscv/extensions.yaml
@@ -0,0 +1,250 @@
+# SPDX-License-Identifier: (GPL-2.0 OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/riscv/extensions.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RISC-V ISA extensions
+
+maintainers:
+ - Paul Walmsley <paul.walmsley@sifive.com>
+ - Palmer Dabbelt <palmer@sifive.com>
+ - Conor Dooley <conor@kernel.org>
+
+description: |
+ RISC-V has a large number of extensions, some of which are "standard"
+ extensions, meaning they are ratified by RISC-V International, and others
+ are "vendor" extensions.
+ This document defines properties that indicate whether a hart supports a
+ given extension.
+
+ Once a standard extension has been ratified, no changes in behaviour can be
+ made without the creation of a new extension.
+ The properties for standard extensions therefore map to their originally
+ ratified states, with the exception of the I, Zicntr & Zihpm extensions.
+ See the "i" property for more information.
+
+select:
+ properties:
+ compatible:
+ contains:
+ const: riscv
+
+properties:
+ riscv,isa:
+ description:
+ Identifies the specific RISC-V instruction set architecture
+ supported by the hart. These are documented in the RISC-V
+ User-Level ISA document, available from
+ https://riscv.org/specifications/
+
+ Due to revisions of the ISA specification, some deviations
+ have arisen over time.
+ Notably, riscv,isa was defined prior to the creation of the
+ Zicntr, Zicsr, Zifencei and Zihpm extensions and thus "i"
+ implies "zicntr_zicsr_zifencei_zihpm".
+
+ While the isa strings in ISA specification are case
+ insensitive, letters in the riscv,isa string must be all
+ lowercase.
+ $ref: /schemas/types.yaml#/definitions/string
+ pattern: ^rv(?:64|32)imaf?d?q?c?b?k?j?p?v?h?(?:[hsxz](?:[a-z])+)?(?:_[hsxz](?:[a-z])+)*$
+ deprecated: true
+
+ riscv,isa-base:
+ description:
+ The base ISA implemented by this hart, as described by the 20191213
+ version of the unprivileged ISA specification.
+ enum:
+ - rv32i
+ - rv64i
+
+ riscv,isa-extensions:
+ $ref: /schemas/types.yaml#/definitions/string-array
+ minItems: 1
+ description: Extensions supported by the hart.
+ items:
+ anyOf:
+ # single letter extensions, in canonical order
+ - const: i
+ description: |
+ The base integer instruction set, as ratified in the 20191213
+ version of the unprivileged ISA specification.
+
+ This does not include Chapter 10, "Counters", which was moved into
+ the Zicntr and Zihpm extensions after the ratification of the
+ 20191213 version of the unprivileged specification.
+
+ - const: m
+ description:
+ The standard M extension for integer multiplication and division, as
+ ratified in the 20191213 version of the unprivileged ISA
+ specification.
+
+ - const: a
+ description:
+ The standard A extension for atomic instructions, as ratified in the
+ 20191213 version of the unprivileged ISA specification.
+
+ - const: f
+ description:
+ The standard F extension for single-precision floating point, as
+ ratified in the 20191213 version of the unprivileged ISA
+ specification.
+
+ - const: d
+ description:
+ The standard D extension for double-precision floating-point, as
+ ratified in the 20191213 version of the unprivileged ISA
+ specification.
+
+ - const: q
+ description:
+ The standard Q extension for quad-precision floating-point, as
+ ratified in the 20191213 version of the unprivileged ISA
+ specification.
+
+ - const: c
+ description:
+ The standard C extension for compressed instructions, as ratified in
+ the 20191213 version of the unprivileged ISA specification.
+
+ - const: v
+ description:
+ The standard V extension for vector operations, as ratified
+ in-and-around commit 7a6c8ae ("Fix text that describes vfmv.v.f
+ encoding") of the riscv-v-spec.
+
+ - const: h
+ description:
+ The standard H extension for hypervisors as ratified in the 20191213
+ version of the privileged ISA specification.
+
+ # multi-letter extensions, sorted alphanumerically
+ - const: smaia
+ description: |
+ The standard Smaia supervisor-level extension for the advanced
+ interrupt architecture for machine-mode-visible csr and behavioural
+ changes to interrupts as frozen at commit ccbddab ("Merge pull
+ request #42 from riscv/jhauser-2023-RC4") of riscv-aia.
+
+ - const: ssaia
+ description: |
+ The standard Ssaia supervisor-level extension for the advanced
+ interrupt architecture for supervisor-mode-visible csr and
+ behavioural changes to interrupts as frozen at commit ccbddab
+ ("Merge pull request #42 from riscv/jhauser-2023-RC4") of riscv-aia.
+
+ - const: sscofpmf
+ description: |
+ The standard Sscofpmf supervisor-level extension for count overflow
+ and mode-based filtering as ratified at commit 01d1df0 ("Add ability
+ to manually trigger workflow. (#2)") of riscv-count-overflow.
+
+ - const: sstc
+ description: |
+ The standard Sstc supervisor-level extension for time compare as
+ ratified at commit 3f9ed34 ("Add ability to manually trigger
+ workflow. (#2)") of riscv-time-compare.
+
+ - const: svinval
+ description:
+ The standard Svinval supervisor-level extension for fine-grained
+ address-translation cache invalidation as ratified in the 20191213
+ version of the privileged ISA specification.
+
+ - const: svnapot
+ description:
+ The standard Svnapot supervisor-level extensions for napot
+ translation contiguity as ratified in the 20191213 version of the
+ privileged ISA specification.
+
+ - const: svpbmt
+ description:
+ The standard Svpbmt supervisor-level extensions for page-based
+ memory types as ratified in the 20191213 version of the privileged
+ ISA specification.
+
+ - const: zba
+ description: |
+ The standard Zba bit-manipulation extension for address generation
+ acceleration instructions as ratified at commit 6d33919 ("Merge pull
+ request #158 from hirooih/clmul-fix-loop-end-condition") of
+ riscv-bitmanip.
+
+ - const: zbb
+ description: |
+ The standard Zbb bit-manipulation extension for basic bit-manipulation
+ as ratified at commit 6d33919 ("Merge pull request #158 from
+ hirooih/clmul-fix-loop-end-condition") of riscv-bitmanip.
+
+ - const: zbc
+ description: |
+ The standard Zbc bit-manipulation extension for carry-less
+ multiplication as ratified at commit 6d33919 ("Merge pull request
+ #158 from hirooih/clmul-fix-loop-end-condition") of riscv-bitmanip.
+
+ - const: zbs
+ description: |
+ The standard Zbs bit-manipulation extension for single-bit
+ instructions as ratified at commit 6d33919 ("Merge pull request #158
+ from hirooih/clmul-fix-loop-end-condition") of riscv-bitmanip.
+
+ - const: zicbom
+ description:
+ The standard Zicbom extension for base cache management operations as
+ ratified in commit 3dd606f ("Create cmobase-v1.0.pdf") of riscv-CMOs.
+
+ - const: zicbop
+ description:
+ The standard Zicbop extension for cache-block prefetch instructions
+ as ratified in commit 3dd606f ("Create cmobase-v1.0.pdf") of
+ riscv-CMOs.
+
+ - const: zicboz
+ description:
+ The standard Zicboz extension for cache-block zeroing as ratified
+ in commit 3dd606f ("Create cmobase-v1.0.pdf") of riscv-CMOs.
+
+ - const: zicntr
+ description:
+ The standard Zicntr extension for base counters and timers, as
+ ratified in the 20191213 version of the unprivileged ISA
+ specification.
+
+ - const: zicsr
+ description: |
+ The standard Zicsr extension for control and status register
+ instructions, as ratified in the 20191213 version of the
+ unprivileged ISA specification.
+
+ This does not include Chapter 10, "Counters", which documents
+ special case read-only CSRs, that were moved into the Zicntr and
+ Zihpm extensions after the ratification of the 20191213 version of
+ the unprivileged specification.
+
+ - const: zifencei
+ description:
+ The standard Zifencei extension for instruction-fetch fence, as
+ ratified in the 20191213 version of the unprivileged ISA
+ specification.
+
+ - const: zihintpause
+ description:
+ The standard Zihintpause extension for pause hints, as ratified in
+ commit d8ab5c7 ("Zihintpause is ratified") of the riscv-isa-manual.
+
+ - const: zihpm
+ description:
+ The standard Zihpm extension for hardware performance counters, as
+ ratified in the 20191213 version of the unprivileged ISA
+ specification.
+
+ - const: ztso
+ description:
+ The standard Ztso extension for total store ordering, as ratified
+ in commit 2e5236 ("Ztso is now ratified.") of the
+ riscv-isa-manual.
+
+additionalProperties: true
+...
diff --git a/Documentation/devicetree/bindings/riscv/thead.yaml b/Documentation/devicetree/bindings/riscv/thead.yaml
new file mode 100644
index 000000000000..e62f6821372e
--- /dev/null
+++ b/Documentation/devicetree/bindings/riscv/thead.yaml
@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/riscv/thead.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: T-HEAD SoC-based boards
+
+maintainers:
+ - Jisheng Zhang <jszhang@kernel.org>
+
+description:
+ T-HEAD SoC-based boards
+
+properties:
+ $nodename:
+ const: '/'
+ compatible:
+ oneOf:
+ - description: Sipeed Lichee Pi 4A board for the Sipeed Lichee Module 4A
+ items:
+ - enum:
+ - sipeed,lichee-pi-4a
+ - const: sipeed,lichee-module-4a
+ - const: thead,th1520
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/rtc/isil,isl1208.txt b/Documentation/devicetree/bindings/rtc/isil,isl1208.txt
deleted file mode 100644
index 51f003006f04..000000000000
--- a/Documentation/devicetree/bindings/rtc/isil,isl1208.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-Intersil ISL1209/19 I2C RTC/Alarm chip with event in
-
-ISL12X9 have additional pins EVIN and #EVDET for tamper detection, while the
-ISL1208 and ISL1218 do not. They are all use the same driver with the bindings
-described here, with chip specific properties as noted.
-
-Required properties supported by the device:
- - "compatible": Should be one of the following:
- - "isil,isl1208"
- - "isil,isl1209"
- - "isil,isl1218"
- - "isil,isl1219"
- - "reg": I2C bus address of the device
-
-Optional properties:
- - "interrupt-names": list which may contains "irq" and "evdet"
- evdet applies to isl1209 and isl1219 only
- - "interrupts": list of interrupts for "irq" and "evdet"
- evdet applies to isl1209 and isl1219 only
- - "isil,ev-evienb": Enable or disable internal pull on EVIN pin
- Applies to isl1209 and isl1219 only
- Possible values are 0 and 1
- Value 0 enables internal pull-up on evin pin, 1 disables it.
- Default will leave the non-volatile configuration of the pullup
- as is.
-
-Example isl1219 node with #IRQ pin connected to SoC gpio1 pin12 and #EVDET pin
-connected to SoC gpio2 pin 24 and internal pull-up enabled in EVIN pin.
-
- isl1219: rtc@68 {
- compatible = "isil,isl1219";
- reg = <0x68>;
- interrupt-names = "irq", "evdet";
- interrupts-extended = <&gpio1 12 IRQ_TYPE_EDGE_FALLING>,
- <&gpio2 24 IRQ_TYPE_EDGE_FALLING>;
- isil,ev-evienb = <1>;
- };
-
diff --git a/Documentation/devicetree/bindings/rtc/isil,isl1208.yaml b/Documentation/devicetree/bindings/rtc/isil,isl1208.yaml
new file mode 100644
index 000000000000..11f7378d4997
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/isil,isl1208.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/isil,isl1208.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intersil ISL1209/19 I2C RTC/Alarm chip with event in
+
+maintainers:
+ - Biju Das <biju.das.jz@bp.renesas.com>
+ - Trent Piepho <tpiepho@gmail.com>
+
+description:
+ ISL12X9 have additional pins EVIN and EVDET for tamper detection, while the
+ ISL1208 and ISL1218 do not.
+
+properties:
+ compatible:
+ enum:
+ - isil,isl1208
+ - isil,isl1209
+ - isil,isl1218
+ - isil,isl1219
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ description: |
+ Use xin, if connected to an external crystal.
+ Use clkin, if connected to an external clock signal.
+ enum:
+ - xin
+ - clkin
+
+ interrupts:
+ minItems: 1
+ maxItems: 2
+
+ interrupt-names:
+ minItems: 1
+ items:
+ - const: irq
+ - const: evdet
+
+ isil,ev-evienb:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 0, 1 ]
+ description: |
+ Enable or disable internal pull on EVIN pin
+ Default will leave the non-volatile configuration of the pullup
+ as is.
+ <0> : Enables internal pull-up on evin pin
+ <1> : Disables internal pull-up on evin pin
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - $ref: rtc.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - isil,isl1209
+ - isil,isl1219
+ then:
+ properties:
+ interrupts:
+ maxItems: 2
+ interrupt-names:
+ items:
+ - const: irq
+ - const: evdet
+ else:
+ properties:
+ interrupts:
+ maxItems: 1
+ interrupt-names:
+ items:
+ - const: irq
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtc_twi: rtc@6f {
+ compatible = "isil,isl1208";
+ reg = <0x6f>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/rtc/loongson,rtc.yaml b/Documentation/devicetree/bindings/rtc/loongson,rtc.yaml
new file mode 100644
index 000000000000..f89c1f660aee
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/loongson,rtc.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/loongson,rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson Real-Time Clock
+
+description:
+ The Loongson family chips use an on-chip counter 0 (Time Of Year
+ counter) as the RTC.
+
+maintainers:
+ - Binbin Zhou <zhoubinbin@loongson.cn>
+
+allOf:
+ - $ref: rtc.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - loongson,ls1b-rtc
+ - loongson,ls1c-rtc
+ - loongson,ls7a-rtc
+ - loongson,ls2k1000-rtc
+ - items:
+ - enum:
+ - loongson,ls2k2000-rtc
+ - loongson,ls2k0500-rtc
+ - const: loongson,ls7a-rtc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ rtc@1fe27800 {
+ compatible = "loongson,ls2k1000-rtc";
+ reg = <0x1fe27800 0x100>;
+
+ interrupt-parent = <&liointc1>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/rtc/rtc.yaml b/Documentation/devicetree/bindings/rtc/rtc.yaml
index c6fff5486fe6..efb66df82782 100644
--- a/Documentation/devicetree/bindings/rtc/rtc.yaml
+++ b/Documentation/devicetree/bindings/rtc/rtc.yaml
@@ -15,7 +15,7 @@ description: |
properties:
$nodename:
- pattern: "^rtc(@.*|-[0-9a-f])*$"
+ pattern: "^rtc(@.*|-([0-9]|[1-9][0-9]+))?$"
aux-voltage-chargeable:
$ref: /schemas/types.yaml#/definitions/uint32
diff --git a/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml b/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml
index a3603e638c37..9af77f21bb7f 100644
--- a/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml
+++ b/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml
@@ -47,8 +47,6 @@ properties:
- isil,isl1218
# Intersil ISL12022 Real-time Clock
- isil,isl12022
- # Loongson-2K Socs/LS7A bridge Real-time Clock
- - loongson,ls2x-rtc
# Real Time Clock Module with I2C-Bus
- microcrystal,rv3029
# Real Time Clock
diff --git a/Documentation/devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml b/Documentation/devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml
index 7ed0230f6c67..d1f5eb996dba 100644
--- a/Documentation/devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml
+++ b/Documentation/devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml
@@ -11,7 +11,7 @@ description:
The RTC controller has separate IRQ lines for seconds and alarm.
maintainers:
- - Michal Simek <michal.simek@xilinx.com>
+ - Michal Simek <michal.simek@amd.com>
allOf:
- $ref: rtc.yaml#
diff --git a/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml b/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml
index 30b2131b5860..65cb2e5c5eee 100644
--- a/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml
+++ b/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml
@@ -16,7 +16,6 @@ properties:
- enum:
- atmel,at91rm9200-usart
- atmel,at91sam9260-usart
- - microchip,sam9x60-usart
- items:
- const: atmel,at91rm9200-dbgu
- const: atmel,at91rm9200-usart
@@ -24,6 +23,9 @@ properties:
- const: atmel,at91sam9260-dbgu
- const: atmel,at91sam9260-usart
- items:
+ - const: microchip,sam9x60-usart
+ - const: atmel,at91sam9260-usart
+ - items:
- const: microchip,sam9x60-dbgu
- const: microchip,sam9x60-usart
- const: atmel,at91sam9260-dbgu
diff --git a/Documentation/devicetree/bindings/serial/cavium-uart.txt b/Documentation/devicetree/bindings/serial/cavium-uart.txt
deleted file mode 100644
index 87a6c375cd44..000000000000
--- a/Documentation/devicetree/bindings/serial/cavium-uart.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-* Universal Asynchronous Receiver/Transmitter (UART)
-
-- compatible: "cavium,octeon-3860-uart"
-
- Compatibility with all cn3XXX, cn5XXX and cn6XXX SOCs.
-
-- reg: The base address of the UART register bank.
-
-- interrupts: A single interrupt specifier.
-
-- current-speed: Optional, the current bit rate in bits per second.
-
-Example:
- uart1: serial@1180000000c00 {
- compatible = "cavium,octeon-3860-uart","ns16550";
- reg = <0x11800 0x00000c00 0x0 0x400>;
- current-speed = <115200>;
- interrupts = <0 35>;
- };
diff --git a/Documentation/devicetree/bindings/serial/cdns,uart.yaml b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
index a8b323d7bf94..e35ad1109efc 100644
--- a/Documentation/devicetree/bindings/serial/cdns,uart.yaml
+++ b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Cadence UART Controller
maintainers:
- - Michal Simek <michal.simek@xilinx.com>
+ - Michal Simek <michal.simek@amd.com>
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/serial/nuvoton,ma35d1-serial.yaml b/Documentation/devicetree/bindings/serial/nuvoton,ma35d1-serial.yaml
new file mode 100644
index 000000000000..a76af0f6009b
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/nuvoton,ma35d1-serial.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/nuvoton,ma35d1-serial.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton MA35D1 Universal Asynchronous Receiver/Transmitter (UART)
+
+maintainers:
+ - Min-Jen Chen <mjchen@nuvoton.com>
+ - Jacky Huang <ychuang3@nuvoton.com>
+
+allOf:
+ - $ref: serial.yaml
+
+properties:
+ compatible:
+ const: nuvoton,ma35d1-uart
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/nuvoton,ma35d1-clk.h>
+
+ serial@40700000 {
+ compatible = "nuvoton,ma35d1-uart";
+ reg = <0x40700000 0x100>;
+ interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk UART0_GATE>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/serial/nxp,lpc1850-uart.txt b/Documentation/devicetree/bindings/serial/nxp,lpc1850-uart.txt
deleted file mode 100644
index 04e23e63ee4f..000000000000
--- a/Documentation/devicetree/bindings/serial/nxp,lpc1850-uart.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-* NXP LPC1850 UART
-
-Required properties:
-- compatible : "nxp,lpc1850-uart", "ns16550a".
-- reg : offset and length of the register set for the device.
-- interrupts : should contain uart interrupt.
-- clocks : phandle to the input clocks.
-- clock-names : required elements: "uartclk", "reg".
-
-Optional properties:
-- dmas : Two or more DMA channel specifiers following the
- convention outlined in bindings/dma/dma.txt
-- dma-names : Names for the dma channels, if present. There must
- be at least one channel named "tx" for transmit
- and named "rx" for receive.
-
-Since it's also possible to also use the of_serial.c driver all
-parameters from 8250.txt also apply but are optional.
-
-Example:
-uart0: serial@40081000 {
- compatible = "nxp,lpc1850-uart", "ns16550a";
- reg = <0x40081000 0x1000>;
- reg-shift = <2>;
- interrupts = <24>;
- clocks = <&ccu2 CLK_APB0_UART0>, <&ccu1 CLK_CPU_UART0>;
- clock-names = "uartclk", "reg";
-};
diff --git a/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt b/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt
index 0fa8e3e43bf8..1a7e4bff0456 100644
--- a/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt
+++ b/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt
@@ -23,6 +23,9 @@ Optional properties:
1 = active low.
- irda-mode-ports: An array that lists the indices of the port that
should operate in IrDA mode.
+- nxp,modem-control-line-ports: An array that lists the indices of the port that
+ should have shared GPIO lines configured as
+ modem control lines.
Example:
sc16is750: sc16is750@51 {
@@ -35,6 +38,26 @@ Example:
#gpio-cells = <2>;
};
+ sc16is752: sc16is752@53 {
+ compatible = "nxp,sc16is752";
+ reg = <0x53>;
+ clocks = <&clk20m>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+ nxp,modem-control-line-ports = <1>; /* Port 1 as modem control lines */
+ gpio-controller; /* Port 0 as GPIOs */
+ #gpio-cells = <2>;
+ };
+
+ sc16is752: sc16is752@54 {
+ compatible = "nxp,sc16is752";
+ reg = <0x54>;
+ clocks = <&clk20m>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+ nxp,modem-control-line-ports = <0 1>; /* Ports 0 and 1 as modem control lines */
+ };
+
* spi as bus
Required properties:
@@ -59,6 +82,9 @@ Optional properties:
1 = active low.
- irda-mode-ports: An array that lists the indices of the port that
should operate in IrDA mode.
+- nxp,modem-control-line-ports: An array that lists the indices of the port that
+ should have shared GPIO lines configured as
+ modem control lines.
Example:
sc16is750: sc16is750@0 {
@@ -70,3 +96,23 @@ Example:
gpio-controller;
#gpio-cells = <2>;
};
+
+ sc16is752: sc16is752@1 {
+ compatible = "nxp,sc16is752";
+ reg = <1>;
+ clocks = <&clk20m>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+ nxp,modem-control-line-ports = <1>; /* Port 1 as modem control lines */
+ gpio-controller; /* Port 0 as GPIOs */
+ #gpio-cells = <2>;
+ };
+
+ sc16is752: sc16is752@2 {
+ compatible = "nxp,sc16is752";
+ reg = <2>;
+ clocks = <&clk20m>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+ nxp,modem-control-line-ports = <0 1>; /* Ports 0 and 1 as modem control lines */
+ };
diff --git a/Documentation/devicetree/bindings/slimbus/slimbus.yaml b/Documentation/devicetree/bindings/slimbus/slimbus.yaml
index 22513fb7c59a..3b8cae9d1016 100644
--- a/Documentation/devicetree/bindings/slimbus/slimbus.yaml
+++ b/Documentation/devicetree/bindings/slimbus/slimbus.yaml
@@ -15,7 +15,7 @@ description:
properties:
$nodename:
- pattern: "^slim(@.*|-[0-9a-f])*$"
+ pattern: "^slim(@.*|-([0-9]|[1-9][0-9]+))?$"
"#address-cells":
const: 2
diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm23550-cdc.yaml b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm23550-cdc.yaml
new file mode 100644
index 000000000000..1a952f569803
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm23550-cdc.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/bcm/brcm,bcm23550-cdc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM23550 Cluster Dormant Control
+
+description:
+ The Cluster Dormant Control block keeps the CPU in idle state. A command
+ needs to be sent to this block to bring the CPU into running state.
+
+maintainers:
+ - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+ compatible:
+ const: brcm,bcm23550-cdc
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ cdc@3fe0e000 {
+ compatible = "brcm,bcm23550-cdc";
+ reg = <0x3fe0e000 0x78>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml
index 3fefd634bc69..a06ac2177444 100644
--- a/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml
+++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml
@@ -33,6 +33,7 @@ properties:
- mediatek,mt2701-pwrap
- mediatek,mt6765-pwrap
- mediatek,mt6779-pwrap
+ - mediatek,mt6795-pwrap
- mediatek,mt6797-pwrap
- mediatek,mt6873-pwrap
- mediatek,mt7622-pwrap
diff --git a/Documentation/devicetree/bindings/arm/npcm/nuvoton,gcr.yaml b/Documentation/devicetree/bindings/soc/nuvoton/nuvoton,npcm-gcr.yaml
index 94e72f25b331..23e7e4ea01ff 100644
--- a/Documentation/devicetree/bindings/arm/npcm/nuvoton,gcr.yaml
+++ b/Documentation/devicetree/bindings/soc/nuvoton/nuvoton,npcm-gcr.yaml
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
-$id: http://devicetree.org/schemas/arm/npcm/nuvoton,gcr.yaml#
+$id: http://devicetree.org/schemas/soc/nuvoton/nuvoton,npcm-gcr.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Global Control Registers block in Nuvoton SoCs
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml
index 798f15588ee2..9dc8e48c8af4 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml
@@ -26,6 +26,7 @@ properties:
items:
- enum:
- qcom,qdu1000-aoss-qmp
+ - qcom,sa8775p-aoss-qmp
- qcom,sc7180-aoss-qmp
- qcom,sc7280-aoss-qmp
- qcom,sc8180x-aoss-qmp
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml
index 14dd29471c80..f2c5ec7e6437 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml
@@ -55,9 +55,10 @@ additionalProperties: false
examples:
- |
eud@88e0000 {
- compatible = "qcom,sc7280-eud","qcom,eud";
+ compatible = "qcom,sc7280-eud", "qcom,eud";
reg = <0x88e0000 0x2000>,
<0x88e2000 0x1000>;
+
ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -67,6 +68,7 @@ examples:
remote-endpoint = <&usb2_role_switch>;
};
};
+
port@1 {
reg = <1>;
eud_con: endpoint {
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,rpm-master-stats.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,rpm-master-stats.yaml
new file mode 100644
index 000000000000..031800985b5e
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,rpm-master-stats.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,rpm-master-stats.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. (QTI) RPM Master Stats
+
+maintainers:
+ - Konrad Dybcio <konrad.dybcio@linaro.org>
+
+description: |
+ The Qualcomm RPM (Resource Power Manager) architecture includes a concept
+ of "RPM Masters". They can be thought of as "the local gang leaders", usually
+ spanning a single subsystem (e.g. APSS, ADSP, CDSP). All of the RPM decisions
+ (particularly around entering hardware-driven low power modes: XO shutdown
+ and total system-wide power collapse) are first made at Master-level, and
+ only then aggregated for the entire system.
+
+ The Master Stats provide a few useful bits that can be used to assess whether
+ our device has entered the desired low-power mode, how long it took to do so,
+ the duration of that residence, how long it took to come back online,
+ how many times a given sleep state was entered and which cores are actively
+ voting for staying awake.
+
+ This scheme has been used on various SoCs in the 2013-2023 era, with some
+ newer or higher-end designs providing this information through an SMEM query.
+
+properties:
+ compatible:
+ const: qcom,rpm-master-stats
+
+ qcom,rpm-msg-ram:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: Phandle to an RPM MSG RAM slice containing the master stats
+ minItems: 1
+ maxItems: 5
+
+ qcom,master-names:
+ $ref: /schemas/types.yaml#/definitions/string-array
+ description:
+ The name of the RPM Master which owns the MSG RAM slice where this
+ instance of Master Stats resides
+ minItems: 1
+ maxItems: 5
+
+required:
+ - compatible
+ - qcom,rpm-msg-ram
+ - qcom,master-names
+
+additionalProperties: false
+
+examples:
+ - |
+ stats {
+ compatible = "qcom,rpm-master-stats";
+ qcom,rpm-msg-ram = <&apss_master_stats>,
+ <&mpss_master_stats>,
+ <&adsp_master_stats>,
+ <&cdsp_master_stats>,
+ <&tz_master_stats>;
+ qcom,master-names = "APSS",
+ "MPSS",
+ "ADSP",
+ "CDSP",
+ "TZ";
+ };
+...
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml
index a4046ba60846..af632d0e0355 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml
@@ -124,6 +124,7 @@ required:
- qcom,tcs-offset
- reg
- reg-names
+ - power-domains
additionalProperties: false
@@ -179,6 +180,7 @@ examples:
<SLEEP_TCS 1>,
<WAKE_TCS 1>,
<CONTROL_TCS 0>;
+ power-domains = <&CLUSTER_PD>;
};
- |
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
index ea86569a40d3..65c02a7fef80 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
@@ -81,6 +81,7 @@ if:
contains:
enum:
- qcom,rpm-apq8084
+ - qcom,rpm-msm8226
- qcom,rpm-msm8916
- qcom,rpm-msm8936
- qcom,rpm-msm8974
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom-stats.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom-stats.yaml
index 7ab8cfff18c1..96a7f1822022 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom-stats.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom-stats.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm Technologies, Inc. (QTI) Stats
maintainers:
- - Maulik Shah <mkshah@codeaurora.org>
+ - Maulik Shah <quic_mkshah@quicinc.com>
description:
Always On Processor/Resource Power Manager maintains statistics of the SoC
diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
index 65a2d5a4f28d..e4fa6a07b4fa 100644
--- a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
+++ b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
@@ -24,6 +24,7 @@ properties:
- rockchip,rk3588-bigcore1-grf
- rockchip,rk3588-ioc
- rockchip,rk3588-php-grf
+ - rockchip,rk3588-pipe-phy-grf
- rockchip,rk3588-sys-grf
- rockchip,rk3588-pcie3-phy-grf
- rockchip,rk3588-pcie3-pipe-grf
@@ -52,6 +53,7 @@ properties:
- rockchip,rk3399-pmugrf
- rockchip,rk3568-grf
- rockchip,rk3568-pmugrf
+ - rockchip,rk3588-usb2phy-grf
- rockchip,rv1108-grf
- rockchip,rv1108-pmugrf
- rockchip,rv1126-grf
@@ -119,7 +121,7 @@ allOf:
usbphy:
type: object
- $ref: "/schemas/phy/rockchip-usb-phy.yaml#"
+ $ref: /schemas/phy/rockchip-usb-phy.yaml#
unevaluatedProperties: false
@@ -134,14 +136,14 @@ allOf:
gpio:
type: object
- $ref: "/schemas/gpio/rockchip,rk3328-grf-gpio.yaml#"
+ $ref: /schemas/gpio/rockchip,rk3328-grf-gpio.yaml#
unevaluatedProperties: false
power-controller:
type: object
- $ref: "/schemas/power/rockchip,power-controller.yaml#"
+ $ref: /schemas/power/rockchip,power-controller.yaml#
unevaluatedProperties: false
@@ -156,7 +158,7 @@ allOf:
mipi-dphy-rx0:
type: object
- $ref: "/schemas/phy/rockchip-mipi-dphy-rx0.yaml#"
+ $ref: /schemas/phy/rockchip-mipi-dphy-rx0.yaml#
unevaluatedProperties: false
@@ -184,7 +186,7 @@ allOf:
reboot-mode:
type: object
- $ref: "/schemas/power/reset/syscon-reboot-mode.yaml#"
+ $ref: /schemas/power/reset/syscon-reboot-mode.yaml#
unevaluatedProperties: false
@@ -199,6 +201,7 @@ allOf:
- rockchip,rk3308-usb2phy-grf
- rockchip,rk3328-usb2phy-grf
- rockchip,rk3399-grf
+ - rockchip,rk3588-usb2phy-grf
- rockchip,rv1108-grf
then:
@@ -238,7 +241,7 @@ allOf:
io-domains:
type: object
- $ref: "/schemas/power/rockchip-io-domain.yaml#"
+ $ref: /schemas/power/rockchip-io-domain.yaml#
unevaluatedProperties: false
diff --git a/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml b/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml
index 5d8d9497f18e..e1d716df5dfa 100644
--- a/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml
+++ b/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml
@@ -17,6 +17,7 @@ select:
enum:
- samsung,exynos3250-pmu
- samsung,exynos4210-pmu
+ - samsung,exynos4212-pmu
- samsung,exynos4412-pmu
- samsung,exynos5250-pmu
- samsung,exynos5260-pmu
@@ -36,6 +37,7 @@ properties:
- enum:
- samsung,exynos3250-pmu
- samsung,exynos4210-pmu
+ - samsung,exynos4212-pmu
- samsung,exynos4412-pmu
- samsung,exynos5250-pmu
- samsung,exynos5260-pmu
@@ -50,6 +52,7 @@ properties:
- enum:
- samsung,exynos3250-pmu
- samsung,exynos4210-pmu
+ - samsung,exynos4212-pmu
- samsung,exynos4412-pmu
- samsung,exynos5250-pmu
- samsung,exynos5420-pmu
@@ -125,6 +128,7 @@ allOf:
enum:
- samsung,exynos3250-pmu
- samsung,exynos4210-pmu
+ - samsung,exynos4212-pmu
- samsung,exynos4412-pmu
- samsung,exynos5250-pmu
- samsung,exynos5410-pmu
@@ -143,6 +147,7 @@ allOf:
enum:
- samsung,exynos3250-pmu
- samsung,exynos4210-pmu
+ - samsung,exynos4212-pmu
- samsung,exynos4412-pmu
- samsung,exynos5250-pmu
- samsung,exynos5420-pmu
diff --git a/Documentation/devicetree/bindings/sound/adi,max98388.yaml b/Documentation/devicetree/bindings/sound/adi,max98388.yaml
new file mode 100644
index 000000000000..93ccd5905736
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/adi,max98388.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/adi,max98388.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices MAX98388 Speaker Amplifier
+
+maintainers:
+ - Ryan Lee <ryans.lee@analog.com>
+
+description:
+ The MAX98388 is a mono Class-D speaker amplifier with I/V feedback.
+ The device provides a PCM interface for audio data and a standard
+ I2C interface for control data communication.
+
+allOf:
+ - $ref: dai-common.yaml#
+
+properties:
+ compatible:
+ enum:
+ - adi,max98388
+
+ reg:
+ maxItems: 1
+
+ '#sound-dai-cells':
+ const: 0
+
+ adi,vmon-slot-no:
+ description: slot number of the voltage feedback monitor
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 15
+ default: 0
+
+ adi,imon-slot-no:
+ description: slot number of the current feedback monitor
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 15
+ default: 1
+
+ adi,interleave-mode:
+ description:
+ For cases where a single combined channel for the I/V feedback data
+ is not sufficient, the device can also be configured to share
+ a single data output channel on alternating frames.
+ In this configuration, the current and voltage data will be frame
+ interleaved on a single output channel.
+ type: boolean
+
+ reset-gpios:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - '#sound-dai-cells'
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ max98388: amplifier@39 {
+ compatible = "adi,max98388";
+ reg = <0x39>;
+ #sound-dai-cells = <0>;
+ adi,vmon-slot-no = <0>;
+ adi,imon-slot-no = <1>;
+ adi,interleave-mode;
+ reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/sound/adi,ssm2518.yaml b/Documentation/devicetree/bindings/sound/adi,ssm2518.yaml
new file mode 100644
index 000000000000..f3f32540779c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/adi,ssm2518.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/adi,ssm2518.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices SSM2518 audio amplifier
+
+maintainers:
+ - Lars-Peter Clausen <lars@metafoo.de>
+
+allOf:
+ - $ref: dai-common.yaml#
+
+properties:
+ compatible:
+ const: adi,ssm2518
+
+ reg:
+ maxItems: 1
+ description: |
+ I2C address of the device. This will either be 0x34 (ADDR pin low)
+ or 0x35 (ADDR pin high)
+
+ gpios:
+ maxItems: 1
+ description: |
+ GPIO connected to the nSD pin. If the property is not present
+ it is assumed that the nSD pin is hardwired to always on.
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ codec@34 {
+ compatible = "adi,ssm2518";
+ reg = <0x34>;
+ gpios = <&gpio 5 0>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/sound/adi,ssm3515.yaml b/Documentation/devicetree/bindings/sound/adi,ssm3515.yaml
new file mode 100644
index 000000000000..144450df5869
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/adi,ssm3515.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/adi,ssm3515.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices SSM3515 Audio Amplifier
+
+maintainers:
+ - Martin Povišer <povik+lin@cutebit.org>
+
+description: |
+ SSM3515 is a mono Class-D audio amplifier with digital input.
+
+ https://www.analog.com/media/en/technical-documentation/data-sheets/SSM3515.pdf
+
+allOf:
+ - $ref: dai-common.yaml#
+
+properties:
+ compatible:
+ enum:
+ - adi,ssm3515
+
+ reg:
+ maxItems: 1
+
+ '#sound-dai-cells':
+ const: 0
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ codec@14 {
+ compatible = "adi,ssm3515";
+ reg = <0x14>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "Left Tweeter";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml b/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml
index 3de7b36829da..d3ce4de449d5 100644
--- a/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml
+++ b/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml
@@ -39,22 +39,4 @@ required:
additionalProperties: false
-examples:
- - |
- sound {
- compatible = "audio-graph-card2";
-
- links = <&cpu_port>;
- };
-
- cpu {
- compatible = "cpu-driver";
-
- cpu_port: port { cpu_ep: endpoint { remote-endpoint = <&codec_ep>; }; };
- };
-
- codec {
- compatible = "codec-driver";
-
- port { codec_ep: endpoint { remote-endpoint = <&cpu_ep>; }; };
- };
+...
diff --git a/Documentation/devicetree/bindings/sound/audio-graph.yaml b/Documentation/devicetree/bindings/sound/audio-graph.yaml
index c87eb91de159..ed31e04ff6a6 100644
--- a/Documentation/devicetree/bindings/sound/audio-graph.yaml
+++ b/Documentation/devicetree/bindings/sound/audio-graph.yaml
@@ -24,7 +24,11 @@ properties:
connection's sink, the second being the connection's source.
$ref: /schemas/types.yaml#/definitions/non-unique-string-array
widgets:
- description: User specified audio sound widgets.
+ description: |
+ User specified audio sound widgets.
+ Each entry is a pair of strings, the first being the type of
+ widget ("Microphone", "Line", "Headphone", "Speaker"), the
+ second being the machine specific name for the widget.
$ref: /schemas/types.yaml#/definitions/non-unique-string-array
convert-rate:
$ref: /schemas/sound/dai-params.yaml#/$defs/dai-sample-rate
diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml
index 2ab74f995685..4c9acb8d4c4c 100644
--- a/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml
+++ b/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml
@@ -62,7 +62,7 @@ patternProperties:
GPIO pin direction. Valid only when 'gpio-ctrl' is 1
0 = Output
1 = Input
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 1
default: 1
@@ -71,7 +71,7 @@ patternProperties:
GPIO level. Valid only when 'gpio-ctrl' is 1 and 'gpio-dir' is 0
0 = Low
1 = High
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 1
default: 0
@@ -80,7 +80,7 @@ patternProperties:
GPIO level. Valid only when 'gpio-ctrl' is 1 and 'gpio-dir' is 0
0 = CMOS
1 = Open Drain
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 1
default: 0
@@ -90,7 +90,7 @@ patternProperties:
and 'gpio-dir' is 0
0 = Non-inverted, Active High
1 = Inverted, Active Low
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 1
default: 0
@@ -114,7 +114,7 @@ patternProperties:
0 = High impedance input
1 = Pin acts as a GPIO, direction controlled by 'gpio-dir'
2-7 = Reserved
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 7
default: 0
diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml
index 670b67ec0b61..f7bafbd4f1c2 100644
--- a/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml
+++ b/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml
@@ -44,6 +44,10 @@ properties:
VAHP-supply:
description: phandle to voltage regulator of headphone
+ port:
+ $ref: audio-graph-port.yaml#
+ unevaluatedProperties: false
+
required:
- compatible
- reg
@@ -69,6 +73,13 @@ examples:
VA-supply = <&reg_audio>;
VAHP-supply = <&reg_audio>;
reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>;
+
+ /* assume audio-graph */
+ port {
+ cpu_endpoint: endpoint {
+ remote-endpoint = <&cpu_endpoint>;
+ };
+ };
};
};
...
diff --git a/Documentation/devicetree/bindings/sound/da7219.txt b/Documentation/devicetree/bindings/sound/da7219.txt
deleted file mode 100644
index add1caf26ac2..000000000000
--- a/Documentation/devicetree/bindings/sound/da7219.txt
+++ /dev/null
@@ -1,112 +0,0 @@
-Dialog Semiconductor DA7219 Audio Codec bindings
-
-DA7219 is an audio codec with advanced accessory detect features.
-
-======
-
-Required properties:
-- compatible : Should be "dlg,da7219"
-- reg: Specifies the I2C slave address
-
-- interrupts : IRQ line info for DA7219.
- (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
- further information relating to interrupt properties)
-
-- VDD-supply: VDD power supply for the device
-- VDDMIC-supply: VDDMIC power supply for the device
-- VDDIO-supply: VDDIO power supply for the device
- (See Documentation/devicetree/bindings/regulator/regulator.txt for further
- information relating to regulators)
-
-Optional properties:
-- interrupt-names : Name associated with interrupt line. Should be "wakeup" if
- interrupt is to be used to wake system, otherwise "irq" should be used.
-- wakeup-source: Flag to indicate this device can wake system (suspend/resume).
-
-- #clock-cells : Should be set to '<1>', two clock sources provided;
-- clock-output-names : Names given for DAI clock outputs (WCLK & BCLK);
-
-- clocks : phandle and clock specifier for codec MCLK.
-- clock-names : Clock name string for 'clocks' attribute, should be "mclk".
-
-- dlg,micbias-lvl : Voltage (mV) for Mic Bias
- [<1600>, <1800>, <2000>, <2200>, <2400>, <2600>]
-- dlg,mic-amp-in-sel : Mic input source type
- ["diff", "se_p", "se_n"]
-
-Deprecated properties:
-- dlg,ldo-lvl : Required internal LDO voltage (mV) level for digital engine
- (LDO unavailable in production HW so property no longer required).
-
-======
-
-Child node - 'da7219_aad':
-
-Optional properties:
-- dlg,micbias-pulse-lvl : Mic bias higher voltage pulse level (mV).
- [<2800>, <2900>]
-- dlg,micbias-pulse-time : Mic bias higher voltage pulse duration (ms)
-- dlg,btn-cfg : Periodic button press measurements for 4-pole jack (ms)
- [<2>, <5>, <10>, <50>, <100>, <200>, <500>]
-- dlg,mic-det-thr : Impedance threshold for mic detection measurement (Ohms)
- [<200>, <500>, <750>, <1000>]
-- dlg,jack-ins-deb : Debounce time for jack insertion (ms)
- [<5>, <10>, <20>, <50>, <100>, <200>, <500>, <1000>]
-- dlg,jack-det-rate: Jack type detection latency (3/4 pole)
- ["32ms_64ms", "64ms_128ms", "128ms_256ms", "256ms_512ms"]
-- dlg,jack-rem-deb : Debounce time for jack removal (ms)
- [<1>, <5>, <10>, <20>]
-- dlg,a-d-btn-thr : Impedance threshold between buttons A and D
- [0x0 - 0xFF]
-- dlg,d-b-btn-thr : Impedance threshold between buttons D and B
- [0x0 - 0xFF]
-- dlg,b-c-btn-thr : Impedance threshold between buttons B and C
- [0x0 - 0xFF]
-- dlg,c-mic-btn-thr : Impedance threshold between button C and Mic
- [0x0 - 0xFF]
-- dlg,btn-avg : Number of 8-bit readings for averaged button measurement
- [<1>, <2>, <4>, <8>]
-- dlg,adc-1bit-rpt : Repeat count for 1-bit button measurement
- [<1>, <2>, <4>, <8>]
-
-======
-
-Example:
-
- codec: da7219@1a {
- compatible = "dlg,da7219";
- reg = <0x1a>;
-
- interrupt-parent = <&gpio6>;
- interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
-
- VDD-supply = <&reg_audio>;
- VDDMIC-supply = <&reg_audio>;
- VDDIO-supply = <&reg_audio>;
-
- #clock-cells = <1>;
- clock-output-names = "dai-wclk", "dai-bclk";
-
- clocks = <&clks 201>;
- clock-names = "mclk";
-
- dlg,ldo-lvl = <1200>;
- dlg,micbias-lvl = <2600>;
- dlg,mic-amp-in-sel = "diff";
-
- da7219_aad {
- dlg,btn-cfg = <50>;
- dlg,mic-det-thr = <500>;
- dlg,jack-ins-deb = <20>;
- dlg,jack-det-rate = "32ms_64ms";
- dlg,jack-rem-deb = <1>;
-
- dlg,a-d-btn-thr = <0xa>;
- dlg,d-b-btn-thr = <0x16>;
- dlg,b-c-btn-thr = <0x21>;
- dlg,c-mic-btn-thr = <0x3E>;
-
- dlg,btn-avg = <4>;
- dlg,adc-1bit-rpt = <1>;
- };
- };
diff --git a/Documentation/devicetree/bindings/sound/dialog,da7219.yaml b/Documentation/devicetree/bindings/sound/dialog,da7219.yaml
new file mode 100644
index 000000000000..bb5af48ab1e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/dialog,da7219.yaml
@@ -0,0 +1,237 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/dialog,da7219.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dialog Semiconductor DA7219 Audio Codec
+
+maintainers:
+ - David Rau <David.Rau.opensource@dm.renesas.com>
+
+description:
+ The DA7219 is an ultra low-power audio codec with
+ in-built advanced accessory detection (AAD) for mobile
+ computing and accessory applications, which supports
+ sample rates up to 96 kHz at 24-bit resolution.
+
+properties:
+ compatible:
+ const: dlg,da7219
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ VDD-supply:
+ description:
+ VDD power supply for the device.
+
+ VDDMIC-supply:
+ description:
+ VDDMIC power supply for the device.
+
+ VDDIO-supply:
+ description:
+ VDDIO power supply for the device.
+
+ interrupt-names:
+ description:
+ Should be "wakeup" if interrupt is to be used to wake system,
+ otherwise "irq" should be used.
+ enum:
+ - wakeup
+ - irq
+
+ wakeup-source:
+ type: boolean
+ description:
+ Flag to indicate this device can wake system (suspend/resume).
+
+ "#clock-cells":
+ const: 1
+
+ clock-output-names:
+ minItems: 2
+ maxItems: 2
+ description:
+ Name given for DAI WCLK and BCLK outputs.
+
+ clocks:
+ maxItems: 1
+ description:
+ phandle and clock specifier for codec MCLK.
+
+ clock-names:
+ const: mclk
+
+ dlg,micbias-lvl:
+ enum: [1600, 1800, 2000, 2200, 2400, 2600]
+ description:
+ Voltage (mV) for Mic Bias.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ dlg,mic-amp-in-sel:
+ enum: ["diff", "se_p", "se_n"]
+ description:
+ Mic input source type.
+
+ diff - Differential.
+
+ se_p - MIC_P.
+ Positive differential analog microphone input.
+
+ se_n - MIC_N.
+ Negative differential analog microphone input.
+ $ref: /schemas/types.yaml#/definitions/string
+
+ da7219_aad:
+ type: object
+ description:
+ Configuration of advanced accessory detection.
+ properties:
+ dlg,micbias-pulse-lvl:
+ enum: [2800, 2900]
+ description:
+ Mic bias higher voltage pulse level (mV).
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ dlg,micbias-pulse-time:
+ description:
+ Mic bias higher voltage pulse duration (ms).
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+
+ dlg,btn-cfg:
+ enum: [2, 5, 10, 50, 100, 200, 500]
+ description:
+ Periodic button press measurements for 4-pole jack (ms).
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ dlg,mic-det-thr:
+ enum: [200, 500, 750, 1000]
+ description:
+ Impedance threshold for mic detection measurement (Ohms).
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ dlg,jack-ins-deb:
+ enum: [5, 10, 20, 50, 100, 200, 500, 1000]
+ description:
+ Debounce time for jack insertion (ms).
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ dlg,jack-ins-det-pty:
+ enum: ["low", "high"]
+ description:
+ Polarity for jack insertion detection.
+ $ref: /schemas/types.yaml#/definitions/string
+
+ dlg,jack-det-rate:
+ enum: ["32_64", "64_128", "128_256", "256_512"]
+ description:
+ Jack type (3/4 pole) detection latency (ms).
+ $ref: /schemas/types.yaml#/definitions/string
+
+ dlg,jack-rem-deb:
+ enum: [1, 5, 10, 20]
+ description:
+ Debounce time for jack removal (ms).
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ dlg,a-d-btn-thr:
+ description:
+ Impedance threshold between buttons A and D.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 255
+
+ dlg,d-b-btn-thr:
+ description:
+ Impedance threshold between buttons D and B.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 255
+
+ dlg,b-c-btn-thr:
+ description:
+ Impedance threshold between buttons B and C.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 255
+
+ dlg,c-mic-btn-thr:
+ description:
+ Impedance threshold between button C and Mic.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 255
+
+ dlg,btn-avg:
+ enum: [1, 2, 4, 8]
+ description:
+ Number of 8-bit readings for averaged button measurement.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ dlg,adc-1bit-rpt:
+ enum: [1, 2, 4, 8]
+ description:
+ Repeat count for 1-bit button measurement.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - VDD-supply
+ - VDDMIC-supply
+ - VDDIO-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ codec: da7219@1a {
+ compatible = "dlg,da7219";
+ reg = <0x1a>;
+
+ interrupt-parent = <&gpio6>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+
+ VDD-supply = <&vdd_reg>;
+ VDDMIC-supply = <&vddmic_reg>;
+ VDDIO-supply = <&vddio_reg>;
+
+ #clock-cells = <1>;
+ clock-output-names = "da7219-dai-wclk", "da7219-dai-bclk";
+
+ clocks = <&clks 201>;
+ clock-names = "mclk";
+
+ dlg,micbias-lvl = <2600>;
+ dlg,mic-amp-in-sel = "diff";
+
+ da7219_aad {
+ dlg,btn-cfg = <50>;
+ dlg,mic-det-thr = <500>;
+ dlg,jack-ins-deb = <20>;
+ dlg,jack-ins-det-pty = "low";
+ dlg,jack-det-rate = "32_64";
+ dlg,jack-rem-deb = <1>;
+
+ dlg,a-d-btn-thr = <0xa>;
+ dlg,d-b-btn-thr = <0x16>;
+ dlg,b-c-btn-thr = <0x21>;
+ dlg,c-mic-btn-thr = <0x3E>;
+
+ dlg,btn-avg = <4>;
+ dlg,adc-1bit-rpt = <1>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt
index 8b4f4015cfe4..4e8dbc5abfd1 100644
--- a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt
+++ b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt
@@ -46,6 +46,8 @@ The compatible list for this generic sound card currently:
"fsl,imx-audio-wm8958"
+ "fsl,imx-audio-nau8822"
+
Required properties:
- compatible : Contains one of entries in the compatible list.
diff --git a/Documentation/devicetree/bindings/sound/google,chv3-codec.yaml b/Documentation/devicetree/bindings/sound/google,chv3-codec.yaml
new file mode 100644
index 000000000000..5329dc140b1c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/google,chv3-codec.yaml
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/google,chv3-codec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Google Chameleon v3 audio codec
+
+maintainers:
+ - Paweł Anikiel <pan@semihalf.com>
+
+allOf:
+ - $ref: dai-common.yaml#
+
+properties:
+ compatible:
+ const: google,chv3-codec
+
+ "#sound-dai-cells":
+ const: 0
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ audio-codec {
+ compatible = "google,chv3-codec";
+ };
diff --git a/Documentation/devicetree/bindings/sound/google,chv3-i2s.yaml b/Documentation/devicetree/bindings/sound/google,chv3-i2s.yaml
new file mode 100644
index 000000000000..3ce910f44d39
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/google,chv3-i2s.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/google,chv3-i2s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Google Chameleon v3 I2S device
+
+maintainers:
+ - Paweł Anikiel <pan@semihalf.com>
+
+description: |
+ I2S device for the Google Chameleon v3. The device handles both RX
+ and TX using a producer/consumer ring buffer design.
+
+properties:
+ compatible:
+ const: google,chv3-i2s
+
+ reg:
+ items:
+ - description: core registers
+ - description: irq registers
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ i2s@c0060300 {
+ compatible = "google,chv3-i2s";
+ reg = <0xc0060300 0x100>,
+ <0xc0060f00 0x10>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ };
diff --git a/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml b/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml
index 67ccddd44489..ba5b7728cf33 100644
--- a/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml
+++ b/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Google SC7180-Trogdor ASoC sound card driver
maintainers:
- - Rohit kumar <rohitkr@codeaurora.org>
+ - Rohit kumar <quic_rohkumar@quicinc.com>
- Cheng-Yi Chiang <cychiang@chromium.org>
description:
@@ -74,7 +74,8 @@ patternProperties:
properties:
sound-dai:
- maxItems: 1
+ minItems: 1
+ maxItems: 4
required:
- link-name
diff --git a/Documentation/devicetree/bindings/sound/ingenic,aic.yaml b/Documentation/devicetree/bindings/sound/ingenic,aic.yaml
index c59a7cd9eaa9..d15c000f14e1 100644
--- a/Documentation/devicetree/bindings/sound/ingenic,aic.yaml
+++ b/Documentation/devicetree/bindings/sound/ingenic,aic.yaml
@@ -23,6 +23,7 @@ properties:
- ingenic,jz4760-i2s
- ingenic,jz4770-i2s
- ingenic,jz4780-i2s
+ - ingenic,x1000-i2s
- items:
- const: ingenic,jz4725b-i2s
- const: ingenic,jz4740-i2s
diff --git a/Documentation/devicetree/bindings/sound/loongson,ls-audio-card.yaml b/Documentation/devicetree/bindings/sound/loongson,ls-audio-card.yaml
new file mode 100644
index 000000000000..61e8babed402
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/loongson,ls-audio-card.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/loongson,ls-audio-card.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson 7axxx/2kxxx ASoC audio sound card driver
+
+maintainers:
+ - Yingkun Meng <mengyingkun@loongson.cn>
+
+description:
+ The binding describes the sound card present in loongson
+ 7axxx/2kxxx platform. The sound card is an ASoC component
+ which uses Loongson I2S controller to transfer the audio data.
+
+properties:
+ compatible:
+ const: loongson,ls-audio-card
+
+ model:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: User specified audio sound card name
+
+ mclk-fs:
+ $ref: simple-card.yaml#/definitions/mclk-fs
+
+ cpu:
+ description: Holds subnode which indicates cpu dai.
+ type: object
+ additionalProperties: false
+ properties:
+ sound-dai:
+ maxItems: 1
+ required:
+ - sound-dai
+
+ codec:
+ description: Holds subnode which indicates codec dai.
+ type: object
+ additionalProperties: false
+ properties:
+ sound-dai:
+ maxItems: 1
+ required:
+ - sound-dai
+
+required:
+ - compatible
+ - model
+ - mclk-fs
+ - cpu
+ - codec
+
+additionalProperties: false
+
+examples:
+ - |
+ sound {
+ compatible = "loongson,ls-audio-card";
+ model = "loongson-audio";
+ mclk-fs = <512>;
+
+ cpu {
+ sound-dai = <&i2s>;
+ };
+ codec {
+ sound-dai = <&es8323>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/sound/mediatek,mt8188-afe.yaml b/Documentation/devicetree/bindings/sound/mediatek,mt8188-afe.yaml
index 82ccb32f08f2..e6cb711ece77 100644
--- a/Documentation/devicetree/bindings/sound/mediatek,mt8188-afe.yaml
+++ b/Documentation/devicetree/bindings/sound/mediatek,mt8188-afe.yaml
@@ -29,6 +29,10 @@ properties:
$ref: /schemas/types.yaml#/definitions/phandle
description: The phandle of the mediatek topckgen controller
+ mediatek,infracfg:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: The phandle of the mediatek infracfg controller
+
power-domains:
maxItems: 1
@@ -52,6 +56,11 @@ properties:
- description: mux for i2si1_mck
- description: mux for i2si2_mck
- description: audio 26m clock
+ - description: audio pll1 divide 4
+ - description: audio pll2 divide 4
+ - description: clock divider for iec
+ - description: mux for a2sys clock
+ - description: mux for aud_iec
clock-names:
items:
@@ -63,16 +72,21 @@ properties:
- const: apll12_div2
- const: apll12_div3
- const: apll12_div9
- - const: a1sys_hp_sel
- - const: aud_intbus_sel
- - const: audio_h_sel
- - const: audio_local_bus_sel
- - const: dptx_m_sel
- - const: i2so1_m_sel
- - const: i2so2_m_sel
- - const: i2si1_m_sel
- - const: i2si2_m_sel
+ - const: top_a1sys_hp
+ - const: top_aud_intbus
+ - const: top_audio_h
+ - const: top_audio_local_bus
+ - const: top_dptx
+ - const: top_i2so1
+ - const: top_i2so2
+ - const: top_i2si1
+ - const: top_i2si2
- const: adsp_audio_26m
+ - const: apll1_d4
+ - const: apll2_d4
+ - const: apll12_div4
+ - const: top_a2sys
+ - const: top_aud_iec
mediatek,etdm-in1-cowork-source:
$ref: /schemas/types.yaml#/definitions/uint32
@@ -144,6 +158,7 @@ required:
- resets
- reset-names
- mediatek,topckgen
+ - mediatek,infracfg
- power-domains
- clocks
- clock-names
@@ -162,6 +177,7 @@ examples:
resets = <&watchdog 14>;
reset-names = "audiosys";
mediatek,topckgen = <&topckgen>;
+ mediatek,infracfg = <&infracfg_ao>;
power-domains = <&spm 13>; //MT8188_POWER_DOMAIN_AUDIO
mediatek,etdm-in2-cowork-source = <2>;
mediatek,etdm-out2-cowork-source = <0>;
@@ -184,7 +200,12 @@ examples:
<&topckgen 78>, //CLK_TOP_I2SO2
<&topckgen 79>, //CLK_TOP_I2SI1
<&topckgen 80>, //CLK_TOP_I2SI2
- <&adsp_audio26m 0>; //CLK_AUDIODSP_AUDIO26M
+ <&adsp_audio26m 0>, //CLK_AUDIODSP_AUDIO26M
+ <&topckgen 132>, //CLK_TOP_APLL1_D4
+ <&topckgen 133>, //CLK_TOP_APLL2_D4
+ <&topckgen 183>, //CLK_TOP_APLL12_CK_DIV4
+ <&topckgen 84>, //CLK_TOP_A2SYS
+ <&topckgen 82>; //CLK_TOP_AUD_IEC>;
clock-names = "clk26m",
"apll1",
"apll2",
@@ -193,16 +214,21 @@ examples:
"apll12_div2",
"apll12_div3",
"apll12_div9",
- "a1sys_hp_sel",
- "aud_intbus_sel",
- "audio_h_sel",
- "audio_local_bus_sel",
- "dptx_m_sel",
- "i2so1_m_sel",
- "i2so2_m_sel",
- "i2si1_m_sel",
- "i2si2_m_sel",
- "adsp_audio_26m";
+ "top_a1sys_hp",
+ "top_aud_intbus",
+ "top_audio_h",
+ "top_audio_local_bus",
+ "top_dptx",
+ "top_i2so1",
+ "top_i2so2",
+ "top_i2si1",
+ "top_i2si2",
+ "adsp_audio_26m",
+ "apll1_d4",
+ "apll2_d4",
+ "apll12_div4",
+ "top_a2sys",
+ "top_aud_iec";
};
...
diff --git a/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml b/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml
index 6640272b3f4f..05e532b5d50a 100644
--- a/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml
+++ b/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml
@@ -11,7 +11,9 @@ maintainers:
properties:
compatible:
- const: mediatek,mt8188-mt6359-evb
+ enum:
+ - mediatek,mt8188-mt6359-evb
+ - mediatek,mt8188-nau8825
model:
$ref: /schemas/types.yaml#/definitions/string
@@ -42,7 +44,6 @@ patternProperties:
we are going to update parameters in this node.
items:
enum:
- - ADDA_BE
- DPTX_BE
- ETDM1_IN_BE
- ETDM2_IN_BE
@@ -62,11 +63,28 @@ patternProperties:
required:
- sound-dai
+ dai-format:
+ description: audio format.
+ items:
+ enum:
+ - i2s
+ - right_j
+ - left_j
+ - dsp_a
+ - dsp_b
+
+ mediatek,clk-provider:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: Indicates dai-link clock master.
+ items:
+ enum:
+ - cpu
+ - codec
+
additionalProperties: false
required:
- link-name
- - codec
additionalProperties: false
@@ -87,7 +105,8 @@ examples:
"AIN1", "Headset Mic";
dai-link-0 {
link-name = "ETDM3_OUT_BE";
-
+ dai-format = "i2s";
+ mediatek,clk-provider = "cpu";
codec {
sound-dai = <&hdmi0>;
};
diff --git a/Documentation/devicetree/bindings/sound/microchip,sama7g5-pdmc.yaml b/Documentation/devicetree/bindings/sound/microchip,sama7g5-pdmc.yaml
index 9b40268537cb..9aa65c975c4e 100644
--- a/Documentation/devicetree/bindings/sound/microchip,sama7g5-pdmc.yaml
+++ b/Documentation/devicetree/bindings/sound/microchip,sama7g5-pdmc.yaml
@@ -56,13 +56,9 @@ properties:
items:
items:
- description: value for DS line
+ enum: [0, 1]
- description: value for sampling edge
- anyOf:
- - enum:
- - [0, 0]
- - [0, 1]
- - [1, 0]
- - [1, 1]
+ enum: [0, 1]
minItems: 1
maxItems: 4
uniqueItems: true
diff --git a/Documentation/devicetree/bindings/sound/nau8315.txt b/Documentation/devicetree/bindings/sound/nau8315.txt
deleted file mode 100644
index 1cd94517d45e..000000000000
--- a/Documentation/devicetree/bindings/sound/nau8315.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Nuvoton NAU8315 Mono Class-D Amplifier
-
-Required properties:
-- compatible : "nuvoton,nau8315"
- "nuvoton,nau8318"
-
-Optional properties:
-- enable-gpios : GPIO specifier for the chip's device enable input(EN) pin.
- If this option is not specified then driver does not manage
- the pin state (e.g. chip is always on).
-
-Example:
-
-#include <dt-bindings/gpio/gpio.h>
-
-nau8315 {
- compatible = "nuvoton,nau8315";
- enable-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-};
-
-nau8318 {
- compatible = "nuvoton,nau8318";
- enable-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-};
diff --git a/Documentation/devicetree/bindings/sound/nau8540.txt b/Documentation/devicetree/bindings/sound/nau8540.txt
deleted file mode 100644
index 307a76528320..000000000000
--- a/Documentation/devicetree/bindings/sound/nau8540.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-NAU85L40 audio CODEC
-
-This device supports I2C only.
-
-Required properties:
-
- - compatible : "nuvoton,nau8540"
-
- - reg : the I2C address of the device.
-
-Example:
-
-codec: nau8540@1c {
- compatible = "nuvoton,nau8540";
- reg = <0x1c>;
-};
diff --git a/Documentation/devicetree/bindings/sound/nau8810.txt b/Documentation/devicetree/bindings/sound/nau8810.txt
deleted file mode 100644
index 7deaa452b200..000000000000
--- a/Documentation/devicetree/bindings/sound/nau8810.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-NAU8810/NAU8812/NAU8814 audio CODEC
-
-This device supports I2C only.
-
-Required properties:
-
- - compatible : One of "nuvoton,nau8810" or "nuvoton,nau8812" or
- "nuvoton,nau8814"
-
- - reg : the I2C address of the device.
-
-Example:
-
-codec: nau8810@1a {
- compatible = "nuvoton,nau8810";
- reg = <0x1a>;
-};
diff --git a/Documentation/devicetree/bindings/sound/nau8824.txt b/Documentation/devicetree/bindings/sound/nau8824.txt
deleted file mode 100644
index e0058b97e49a..000000000000
--- a/Documentation/devicetree/bindings/sound/nau8824.txt
+++ /dev/null
@@ -1,88 +0,0 @@
-Nuvoton NAU8824 audio codec
-
-This device supports I2C only.
-
-Required properties:
- - compatible : Must be "nuvoton,nau8824"
-
- - reg : the I2C address of the device. This is either 0x1a (CSB=0) or 0x1b (CSB=1).
-
-Optional properties:
- - nuvoton,jkdet-polarity: JKDET pin polarity. 0 - active high, 1 - active low.
-
- - nuvoton,vref-impedance: VREF Impedance selection
- 0 - Open
- 1 - 25 kOhm
- 2 - 125 kOhm
- 3 - 2.5 kOhm
-
- - nuvoton,micbias-voltage: Micbias voltage level.
- 0 - VDDA
- 1 - VDDA
- 2 - VDDA * 1.1
- 3 - VDDA * 1.2
- 4 - VDDA * 1.3
- 5 - VDDA * 1.4
- 6 - VDDA * 1.53
- 7 - VDDA * 1.53
-
- - nuvoton,sar-threshold-num: Number of buttons supported
- - nuvoton,sar-threshold: Impedance threshold for each button. Array that contains up to 8 buttons configuration. SAR value is calculated as
- SAR = 255 * MICBIAS / SAR_VOLTAGE * R / (2000 + R)
- where MICBIAS is configured by 'nuvoton,micbias-voltage', SAR_VOLTAGE is configured by 'nuvoton,sar-voltage', R - button impedance.
- Refer datasheet section 10.2 for more information about threshold calculation.
-
- - nuvoton,sar-hysteresis: Button impedance measurement hysteresis.
-
- - nuvoton,sar-voltage: Reference voltage for button impedance measurement.
- 0 - VDDA
- 1 - VDDA
- 2 - VDDA * 1.1
- 3 - VDDA * 1.2
- 4 - VDDA * 1.3
- 5 - VDDA * 1.4
- 6 - VDDA * 1.53
- 7 - VDDA * 1.53
-
- - nuvoton,sar-compare-time: SAR compare time
- 0 - 500 ns
- 1 - 1 us
- 2 - 2 us
- 3 - 4 us
-
- - nuvoton,sar-sampling-time: SAR sampling time
- 0 - 2 us
- 1 - 4 us
- 2 - 8 us
- 3 - 16 us
-
- - nuvoton,short-key-debounce: Button short key press debounce time.
- 0 - 30 ms
- 1 - 50 ms
- 2 - 100 ms
-
- - nuvoton,jack-eject-debounce: Jack ejection debounce time.
- 0 - 0 ms
- 1 - 1 ms
- 2 - 10 ms
-
-
-Example:
-
- headset: nau8824@1a {
- compatible = "nuvoton,nau8824";
- reg = <0x1a>;
- interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(E, 6) IRQ_TYPE_LEVEL_LOW>;
- nuvoton,vref-impedance = <2>;
- nuvoton,micbias-voltage = <6>;
- // Setup 4 buttons impedance according to Android specification
- nuvoton,sar-threshold-num = <4>;
- nuvoton,sar-threshold = <0xc 0x1e 0x38 0x60>;
- nuvoton,sar-hysteresis = <0>;
- nuvoton,sar-voltage = <6>;
- nuvoton,sar-compare-time = <1>;
- nuvoton,sar-sampling-time = <1>;
- nuvoton,short-key-debounce = <0>;
- nuvoton,jack-eject-debounce = <1>;
- };
diff --git a/Documentation/devicetree/bindings/sound/nau8825.txt b/Documentation/devicetree/bindings/sound/nau8825.txt
deleted file mode 100644
index a9c34526f4cb..000000000000
--- a/Documentation/devicetree/bindings/sound/nau8825.txt
+++ /dev/null
@@ -1,111 +0,0 @@
-Nuvoton NAU8825 audio codec
-
-This device supports I2C only.
-
-Required properties:
- - compatible : Must be "nuvoton,nau8825"
-
- - reg : the I2C address of the device. This is either 0x1a (CSB=0) or 0x1b (CSB=1).
-
-Optional properties:
- - nuvoton,jkdet-enable: Enable jack detection via JKDET pin.
- - nuvoton,jkdet-pull-enable: Enable JKDET pin pull. If set - pin pull enabled,
- otherwise pin in high impedance state.
- - nuvoton,jkdet-pull-up: Pull-up JKDET pin. If set then JKDET pin is pull up, otherwise pull down.
- - nuvoton,jkdet-polarity: JKDET pin polarity. 0 - active high, 1 - active low.
-
- - nuvoton,vref-impedance: VREF Impedance selection
- 0 - Open
- 1 - 25 kOhm
- 2 - 125 kOhm
- 3 - 2.5 kOhm
-
- - nuvoton,micbias-voltage: Micbias voltage level.
- 0 - VDDA
- 1 - VDDA
- 2 - VDDA * 1.1
- 3 - VDDA * 1.2
- 4 - VDDA * 1.3
- 5 - VDDA * 1.4
- 6 - VDDA * 1.53
- 7 - VDDA * 1.53
-
- - nuvoton,sar-threshold-num: Number of buttons supported
- - nuvoton,sar-threshold: Impedance threshold for each button. Array that contains up to 8 buttons configuration. SAR value is calculated as
- SAR = 255 * MICBIAS / SAR_VOLTAGE * R / (2000 + R)
- where MICBIAS is configured by 'nuvoton,micbias-voltage', SAR_VOLTAGE is configured by 'nuvoton,sar-voltage', R - button impedance.
- Refer datasheet section 10.2 for more information about threshold calculation.
-
- - nuvoton,sar-hysteresis: Button impedance measurement hysteresis.
-
- - nuvoton,sar-voltage: Reference voltage for button impedance measurement.
- 0 - VDDA
- 1 - VDDA
- 2 - VDDA * 1.1
- 3 - VDDA * 1.2
- 4 - VDDA * 1.3
- 5 - VDDA * 1.4
- 6 - VDDA * 1.53
- 7 - VDDA * 1.53
-
- - nuvoton,sar-compare-time: SAR compare time
- 0 - 500 ns
- 1 - 1 us
- 2 - 2 us
- 3 - 4 us
-
- - nuvoton,sar-sampling-time: SAR sampling time
- 0 - 2 us
- 1 - 4 us
- 2 - 8 us
- 3 - 16 us
-
- - nuvoton,short-key-debounce: Button short key press debounce time.
- 0 - 30 ms
- 1 - 50 ms
- 2 - 100 ms
- 3 - 30 ms
-
- - nuvoton,jack-insert-debounce: number from 0 to 7 that sets debounce time to 2^(n+2) ms
- - nuvoton,jack-eject-debounce: number from 0 to 7 that sets debounce time to 2^(n+2) ms
-
- - nuvoton,crosstalk-enable: make crosstalk function enable if set.
-
- - nuvoton,adcout-drive-strong: make the drive strength of ADCOUT IO PIN strong if set.
- Otherwise, the drive keeps normal strength.
-
- - nuvoton,adc-delay-ms: Delay (in ms) to make input path stable and avoid pop noise. The
- default value is 125 and range between 125 to 500 ms.
-
- - clocks: list of phandle and clock specifier pairs according to common clock bindings for the
- clocks described in clock-names
- - clock-names: should include "mclk" for the MCLK master clock
-
-Example:
-
- headset: nau8825@1a {
- compatible = "nuvoton,nau8825";
- reg = <0x1a>;
- interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(E, 6) IRQ_TYPE_LEVEL_LOW>;
- nuvoton,jkdet-enable;
- nuvoton,jkdet-pull-enable;
- nuvoton,jkdet-pull-up;
- nuvoton,jkdet-polarity = <GPIO_ACTIVE_LOW>;
- nuvoton,vref-impedance = <2>;
- nuvoton,micbias-voltage = <6>;
- // Setup 4 buttons impedance according to Android specification
- nuvoton,sar-threshold-num = <4>;
- nuvoton,sar-threshold = <0xc 0x1e 0x38 0x60>;
- nuvoton,sar-hysteresis = <1>;
- nuvoton,sar-voltage = <0>;
- nuvoton,sar-compare-time = <0>;
- nuvoton,sar-sampling-time = <0>;
- nuvoton,short-key-debounce = <2>;
- nuvoton,jack-insert-debounce = <7>;
- nuvoton,jack-eject-debounce = <7>;
- nuvoton,crosstalk-enable;
-
- clock-names = "mclk";
- clocks = <&tegra_pmc TEGRA_PMC_CLK_OUT_2>;
- };
diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8315.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8315.yaml
new file mode 100644
index 000000000000..24006e9dc501
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nuvoton,nau8315.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nuvoton,nau8315.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NAU8315/NAU8318 Mono Class-D Amplifier
+
+maintainers:
+ - David Lin <CTLIN0@nuvoton.com>
+
+allOf:
+ - $ref: dai-common.yaml#
+
+properties:
+ compatible:
+ enum:
+ - nuvoton,nau8315
+ - nuvoton,nau8318
+
+ '#sound-dai-cells':
+ const: 0
+
+ enable-gpios:
+ maxItems: 1
+ description:
+ GPIO specifier for the chip's device enable input(EN) pin.
+ If this option is not specified then driver does not manage
+ the pin state (e.g. chip is always on).
+
+required:
+ - compatible
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ codec {
+ compatible = "nuvoton,nau8315";
+ #sound-dai-cells = <0>;
+ enable-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ };
diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8540.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8540.yaml
new file mode 100644
index 000000000000..7ccfbb8d8b04
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nuvoton,nau8540.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nuvoton,nau8540.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton Technology Corporation NAU85L40 Audio CODEC
+
+maintainers:
+ - John Hsu <KCHSU0@nuvoton.com>
+
+allOf:
+ - $ref: dai-common.yaml#
+
+properties:
+ compatible:
+ const: nuvoton,nau8540
+
+ reg:
+ maxItems: 1
+
+ "#sound-dai-cells":
+ const: 0
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ codec@1c {
+ compatible = "nuvoton,nau8540";
+ reg = <0x1c>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8810.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8810.yaml
new file mode 100644
index 000000000000..d9696f6c75ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nuvoton,nau8810.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nuvoton,nau8810.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NAU8810/NAU8812/NAU8814 audio CODEC
+
+maintainers:
+ - David Lin <CTLIN0@nuvoton.com>
+
+allOf:
+ - $ref: dai-common.yaml#
+
+properties:
+ compatible:
+ enum:
+ - nuvoton,nau8810
+ - nuvoton,nau8812
+ - nuvoton,nau8814
+
+ reg:
+ maxItems: 1
+
+ '#sound-dai-cells':
+ const: 0
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ codec@1a {
+ #sound-dai-cells = <0>;
+ compatible = "nuvoton,nau8810";
+ reg = <0x1a>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8824.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8824.yaml
new file mode 100644
index 000000000000..3dbf438c3841
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nuvoton,nau8824.yaml
@@ -0,0 +1,182 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nuvoton,nau8824.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NAU8824 audio CODEC
+
+maintainers:
+ - John Hsu <KCHSU0@nuvoton.com>
+
+allOf:
+ - $ref: dai-common.yaml#
+
+properties:
+ compatible:
+ enum:
+ - nuvoton,nau8824
+
+ reg:
+ maxItems: 1
+
+ '#sound-dai-cells':
+ const: 0
+
+ interrupts:
+ maxItems: 1
+
+ nuvoton,jkdet-polarity:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ JKDET pin polarity.
+ enum:
+ - 0 # active high
+ - 1 # active low
+ default: 1
+
+ nuvoton,vref-impedance:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ VREF Impedance selection.
+ enum:
+ - 0 # Open
+ - 1 # 25 kOhm
+ - 2 # 125 kOhm
+ - 3 # 2.5 kOhm
+ default: 2
+
+ nuvoton,micbias-voltage:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Micbias voltage level.
+ enum:
+ - 0 # VDDA
+ - 1 # VDDA
+ - 2 # VDDA * 1.1
+ - 3 # VDDA * 1.2
+ - 4 # VDDA * 1.3
+ - 5 # VDDA * 1.4
+ - 6 # VDDA * 1.53
+ - 7 # VDDA * 1.53
+ default: 6
+
+ nuvoton,sar-threshold-num:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Number of buttons supported.
+ minimum: 1
+ maximum: 8
+ default: 4
+
+ nuvoton,sar-threshold:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description:
+ Impedance threshold for each button. Array that contains up to 8 buttons
+ configuration. SAR value is calculated as
+ SAR = 255 * MICBIAS / SAR_VOLTAGE * R / (2000 + R) where MICBIAS is
+ configured by 'nuvoton,micbias-voltage', SAR_VOLTAGE is configured by
+ 'nuvoton,sar-voltage', R - button impedance.
+ Refer datasheet section 10.2 for more information about threshold
+ calculation.
+ minItems: 1
+ maxItems: 8
+ items:
+ minimum: 0
+ maximum: 255
+
+ nuvoton,sar-hysteresis:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Button impedance measurement hysteresis.
+ default: 0
+
+ nuvoton,sar-voltage:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Reference voltage for button impedance measurement.
+ enum:
+ - 0 # VDDA
+ - 1 # VDDA
+ - 2 # VDDA * 1.1
+ - 3 # VDDA * 1.2
+ - 4 # VDDA * 1.3
+ - 5 # VDDA * 1.4
+ - 6 # VDDA * 1.53
+ - 7 # VDDA * 1.53
+ default: 6
+
+ nuvoton,sar-compare-time:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ SAR compare time.
+ enum:
+ - 0 # 500ns
+ - 1 # 1us
+ - 2 # 2us
+ - 3 # 4us
+ default: 1
+
+ nuvoton,sar-sampling-time:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ SAR sampling time.
+ enum:
+ - 0 # 2us
+ - 1 # 4us
+ - 2 # 8us
+ - 3 # 16us
+ default: 1
+
+ nuvoton,short-key-debounce:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Button short key press debounce time.
+ enum:
+ - 0 # 30 ms
+ - 1 # 50 ms
+ - 2 # 100 ms
+ default: 0
+
+ nuvoton,jack-eject-debounce:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Jack ejection debounce time.
+ enum:
+ - 0 # 0 ms
+ - 1 # 1 ms
+ - 2 # 10 ms
+ default: 1
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ codec@1a {
+ #sound-dai-cells = <0>;
+ compatible = "nuvoton,nau8824";
+ reg = <0x1a>;
+ interrupt-parent = <&gpio>;
+ interrupts = <38 IRQ_TYPE_LEVEL_LOW>;
+ nuvoton,vref-impedance = <2>;
+ nuvoton,micbias-voltage = <6>;
+ nuvoton,sar-threshold-num = <4>;
+ // Setup 4 buttons impedance according to Android specification
+ nuvoton,sar-threshold = <0xc 0x1e 0x38 0x60>;
+ nuvoton,sar-hysteresis = <0>;
+ nuvoton,sar-voltage = <6>;
+ nuvoton,sar-compare-time = <1>;
+ nuvoton,sar-sampling-time = <1>;
+ nuvoton,short-key-debounce = <0>;
+ nuvoton,jack-eject-debounce = <1>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8825.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8825.yaml
new file mode 100644
index 000000000000..a54f194a0b49
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nuvoton,nau8825.yaml
@@ -0,0 +1,239 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nuvoton,nau8825.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NAU8825 audio CODEC
+
+maintainers:
+ - John Hsu <KCHSU0@nuvoton.com>
+
+allOf:
+ - $ref: dai-common.yaml#
+
+properties:
+ compatible:
+ enum:
+ - nuvoton,nau8825
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ nuvoton,jkdet-enable:
+ description:
+ Enable jack detection via JKDET pin.
+ type: boolean
+
+ nuvoton,jkdet-pull-enable:
+ description:
+ Enable JKDET pin pull.
+ If set - pin pull enabled, otherwise pin in high impedance state.
+ type: boolean
+
+ nuvoton,jkdet-pull-up:
+ description:
+ Pull-up JKDET pin.
+ If set then JKDET pin is pull up, otherwise pull down.
+ type: boolean
+
+ nuvoton,jkdet-polarity:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ JKDET pin polarity.
+ enum:
+ - 0 # active high
+ - 1 # active low
+ default: 1
+
+ nuvoton,vref-impedance:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ VREF Impedance selection.
+ enum:
+ - 0 # Open
+ - 1 # 25 kOhm
+ - 2 # 125 kOhm
+ - 3 # 2.5 kOhm
+ default: 2
+
+ nuvoton,micbias-voltage:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Micbias voltage level.
+ enum:
+ - 0 # VDDA
+ - 1 # VDDA
+ - 2 # VDDA * 1.1
+ - 3 # VDDA * 1.2
+ - 4 # VDDA * 1.3
+ - 5 # VDDA * 1.4
+ - 6 # VDDA * 1.53
+ - 7 # VDDA * 1.53
+ default: 6
+
+ nuvoton,sar-threshold-num:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Number of buttons supported.
+ minimum: 1
+ maximum: 4
+ default: 4
+
+ nuvoton,sar-threshold:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description:
+ Impedance threshold for each button. Array that contains up to 8 buttons
+ configuration. SAR value is calculated as
+ SAR = 255 * MICBIAS / SAR_VOLTAGE * R / (2000 + R) where MICBIAS is
+ configured by 'nuvoton,micbias-voltage', SAR_VOLTAGE is configured by
+ 'nuvoton,sar-voltage', R - button impedance.
+ Refer datasheet section 10.2 for more information about threshold
+ calculation.
+ minItems: 1
+ maxItems: 4
+ items:
+ minimum: 0
+ maximum: 255
+
+ nuvoton,sar-hysteresis:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Button impedance measurement hysteresis.
+ default: 0
+
+ nuvoton,sar-voltage:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Reference voltage for button impedance measurement.
+ enum:
+ - 0 # VDDA
+ - 1 # VDDA
+ - 2 # VDDA * 1.1
+ - 3 # VDDA * 1.2
+ - 4 # VDDA * 1.3
+ - 5 # VDDA * 1.4
+ - 6 # VDDA * 1.53
+ - 7 # VDDA * 1.53
+ default: 6
+
+ nuvoton,sar-compare-time:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ SAR compare time.
+ enum:
+ - 0 # 500 ns
+ - 1 # 1 us
+ - 2 # 2 us
+ - 3 # 4 us
+ default: 1
+
+ nuvoton,sar-sampling-time:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ SAR sampling time.
+ enum:
+ - 0 # 2 us
+ - 1 # 4 us
+ - 2 # 8 us
+ - 3 # 16 us
+ default: 1
+
+ nuvoton,short-key-debounce:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Button short key press debounce time.
+ enum:
+ - 0 # 30 ms
+ - 1 # 50 ms
+ - 2 # 100 ms
+ - 3 # 30 ms
+ default: 3
+
+ nuvoton,jack-insert-debounce:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ number from 0 to 7 that sets debounce time to 2^(n+2) ms.
+ maximum: 7
+ default: 7
+
+ nuvoton,jack-eject-debounce:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ number from 0 to 7 that sets debounce time to 2^(n+2) ms
+ maximum: 7
+ default: 0
+
+ nuvoton,crosstalk-enable:
+ description:
+ make crosstalk function enable if set.
+ type: boolean
+
+ nuvoton,adcout-drive-strong:
+ description:
+ make the drive strength of ADCOUT IO PIN strong if set.
+ Otherwise, the drive keeps normal strength.
+ type: boolean
+
+ nuvoton,adc-delay-ms:
+ description:
+ Delay (in ms) to make input path stable and avoid pop noise.
+ The default value is 125 and range between 125 to 500 ms.
+ minimum: 125
+ maximum: 500
+ default: 125
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: mclk
+
+ '#sound-dai-cells':
+ const: 0
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ codec@1a {
+ #sound-dai-cells = <0>;
+ compatible = "nuvoton,nau8825";
+ reg = <0x1a>;
+ interrupt-parent = <&gpio>;
+ interrupts = <38 IRQ_TYPE_LEVEL_LOW>;
+ nuvoton,jkdet-enable;
+ nuvoton,jkdet-pull-enable;
+ nuvoton,jkdet-pull-up;
+ nuvoton,jkdet-polarity = <GPIO_ACTIVE_LOW>;
+ nuvoton,vref-impedance = <2>;
+ nuvoton,micbias-voltage = <6>;
+ // Setup 4 buttons impedance according to Android specification
+ nuvoton,sar-threshold-num = <4>;
+ nuvoton,sar-threshold = <0xc 0x1e 0x38 0x60>;
+ nuvoton,sar-hysteresis = <1>;
+ nuvoton,sar-voltage = <0>;
+ nuvoton,sar-compare-time = <0>;
+ nuvoton,sar-sampling-time = <0>;
+ nuvoton,short-key-debounce = <2>;
+ nuvoton,jack-insert-debounce = <7>;
+ nuvoton,jack-eject-debounce = <7>;
+ nuvoton,crosstalk-enable;
+
+ clock-names = "mclk";
+ clocks = <&tegra_pmc 1>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-common.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-common.yaml
index 7c1e9895ce85..2588589ad62d 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-common.yaml
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-common.yaml
@@ -1,8 +1,8 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/sound/nvidia,tegra-audio-common.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/sound/nvidia,tegra-audio-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Common properties for NVIDIA Tegra audio complexes
diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
index 6cc8f86c7531..3a559bd07a79 100644
--- a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
@@ -8,7 +8,7 @@ title: Qualcomm Technologies Inc. LPASS CPU dai driver
maintainers:
- Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
- - Rohit kumar <rohitkr@codeaurora.org>
+ - Rohit kumar <quic_rohkumar@quicinc.com>
description: |
Qualcomm Technologies Inc. SOC Low-Power Audio SubSystem (LPASS) that consist
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml b/Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml
index cdbb4096fa44..9e5b30d9c6e6 100644
--- a/Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml
@@ -1,8 +1,8 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/sound/qcom,q6apm-dai.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/sound/qcom,q6apm-dai.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm Audio Process Manager Digital Audio Interfaces
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.yaml b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.yaml
index 1168410f6fbd..3552c44137ed 100644
--- a/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.yaml
@@ -1,8 +1,8 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/sound/qcom,q6dsp-lpass-clocks.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/sound/qcom,q6dsp-lpass-clocks.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm DSP LPASS Clock Controller
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml
index 044e77718a1b..08c618e7e428 100644
--- a/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml
@@ -1,8 +1,8 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/sound/qcom,q6dsp-lpass-ports.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/sound/qcom,q6dsp-lpass-ports.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm DSP LPASS(Low Power Audio SubSystem) Audio Ports
diff --git a/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml b/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml
new file mode 100644
index 000000000000..e6723c9e312a
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,wsa8840.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm WSA8840/WSA8845/WSA8845H smart speaker amplifier
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+ - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description:
+ WSA884X is a family of Qualcomm Aqstic smart speaker amplifiers using
+ SoundWire digital audio interface.
+
+allOf:
+ - $ref: dai-common.yaml#
+
+properties:
+ compatible:
+ const: sdw20217020400
+
+ reg:
+ maxItems: 1
+
+ powerdown-gpios:
+ description: Powerdown/Shutdown line to use (pin SD_N)
+ maxItems: 1
+
+ '#sound-dai-cells':
+ const: 0
+
+ vdd-1p8-supply: true
+ vdd-io-supply: true
+
+required:
+ - compatible
+ - reg
+ - powerdown-gpios
+ - '#sound-dai-cells'
+ - vdd-1p8-supply
+ - vdd-io-supply
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ soundwire-controller {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ speaker@0,1 {
+ compatible = "sdw20217020400";
+ reg = <0 1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spkr_2_sd_n_active>;
+ powerdown-gpios = <&lpass_tlmm 18 GPIO_ACTIVE_LOW>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "SpkrRight";
+ vdd-1p8-supply = <&vreg_l15b_1p8>;
+ vdd-io-supply = <&vreg_l3g_1p2>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/sound/realtek,rt1016.yaml b/Documentation/devicetree/bindings/sound/realtek,rt1016.yaml
new file mode 100644
index 000000000000..5287e9c9197e
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/realtek,rt1016.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/realtek,rt1016.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Reaktek RT1016 Stereo Class D Audio Amplifier
+
+maintainers:
+ - oder_chiou@realtek.com
+
+allOf:
+ - $ref: dai-common.yaml#
+
+properties:
+ compatible:
+ const: realtek,rt1016
+
+ reg:
+ maxItems: 1
+
+ "#sound-dai-cells":
+ const: 0
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ codec@1a {
+ compatible = "realtek,rt1016";
+ reg = <0x1a>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/sound/rt1016.txt b/Documentation/devicetree/bindings/sound/rt1016.txt
deleted file mode 100644
index 2310f8ff259b..000000000000
--- a/Documentation/devicetree/bindings/sound/rt1016.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-RT1016 Stereo Class D Audio Amplifier
-
-This device supports I2C only.
-
-Required properties:
-
-- compatible : "realtek,rt1016".
-
-- reg : The I2C address of the device.
-
-
-Example:
-
-rt1016: codec@1a {
- compatible = "realtek,rt1016";
- reg = <0x1a>;
-};
diff --git a/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml b/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml
index 56e623d4e168..a970fd264b21 100644
--- a/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml
+++ b/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml
@@ -36,7 +36,8 @@ properties:
const: i2sclk
resets:
- maxItems: 1
+ items:
+ - description: Optional controller resets
dmas:
items:
diff --git a/Documentation/devicetree/bindings/sound/ssm2518.txt b/Documentation/devicetree/bindings/sound/ssm2518.txt
deleted file mode 100644
index 59381a778c79..000000000000
--- a/Documentation/devicetree/bindings/sound/ssm2518.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-SSM2518 audio amplifier
-
-This device supports I2C only.
-
-Required properties:
- - compatible : Must be "adi,ssm2518"
- - reg : the I2C address of the device. This will either be 0x34 (ADDR pin low)
- or 0x35 (ADDR pin high)
-
-Optional properties:
- - gpios : GPIO connected to the nSD pin. If the property is not present it is
- assumed that the nSD pin is hardwired to always on.
-
-Example:
-
- ssm2518: ssm2518@34 {
- compatible = "adi,ssm2518";
- reg = <0x34>;
- gpios = <&gpio 5 0>;
- };
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml b/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml
index a040d4d31412..b9111d375b93 100644
--- a/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml
+++ b/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml
@@ -61,6 +61,10 @@ properties:
description: Configure the I2S device as MCLK clock provider.
const: 0
+ port:
+ $ref: audio-graph-port.yaml#
+ unevaluatedProperties: false
+
required:
- compatible
- "#sound-dai-cells"
@@ -89,6 +93,13 @@ examples:
dma-names = "rx", "tx";
pinctrl-names = "default";
pinctrl-0 = <&i2s2_pins_a>;
+
+ /* assume audio-graph */
+ port {
+ codec_endpoint: endpoint {
+ remote-endpoint = <&codec_endpoint>;
+ };
+ };
};
...
diff --git a/Documentation/devicetree/bindings/sound/starfive,jh7110-tdm.yaml b/Documentation/devicetree/bindings/sound/starfive,jh7110-tdm.yaml
new file mode 100644
index 000000000000..abb373fbfa26
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/starfive,jh7110-tdm.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/starfive,jh7110-tdm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 TDM Controller
+
+description: |
+ The TDM Controller is a Time Division Multiplexed audio interface
+ integrated in StarFive JH7110 SoC, allowing up to 8 channels of
+ audio over a serial interface. The TDM controller can operate both
+ in master and slave mode.
+
+maintainers:
+ - Walker Chen <walker.chen@starfivetech.com>
+
+allOf:
+ - $ref: dai-common.yaml#
+
+properties:
+ compatible:
+ enum:
+ - starfive,jh7110-tdm
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: TDM AHB Clock
+ - description: TDM APB Clock
+ - description: TDM Internal Clock
+ - description: TDM Clock
+ - description: Inner MCLK
+ - description: TDM External Clock
+
+ clock-names:
+ items:
+ - const: tdm_ahb
+ - const: tdm_apb
+ - const: tdm_internal
+ - const: tdm
+ - const: mclk_inner
+ - const: tdm_ext
+
+ resets:
+ items:
+ - description: tdm ahb reset line
+ - description: tdm apb reset line
+ - description: tdm core reset line
+
+ dmas:
+ items:
+ - description: RX DMA Channel
+ - description: TX DMA Channel
+
+ dma-names:
+ items:
+ - const: rx
+ - const: tx
+
+ "#sound-dai-cells":
+ const: 0
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - resets
+ - dmas
+ - dma-names
+ - "#sound-dai-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ tdm@10090000 {
+ compatible = "starfive,jh7110-tdm";
+ reg = <0x10090000 0x1000>;
+ clocks = <&syscrg 184>,
+ <&syscrg 185>,
+ <&syscrg 186>,
+ <&syscrg 187>,
+ <&syscrg 17>,
+ <&tdm_ext>;
+ clock-names = "tdm_ahb", "tdm_apb",
+ "tdm_internal", "tdm",
+ "mclk_inner", "tdm_ext";
+ resets = <&syscrg 105>,
+ <&syscrg 107>,
+ <&syscrg 106>;
+ dmas = <&dma 20>, <&dma 21>;
+ dma-names = "rx","tx";
+ #sound-dai-cells = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/sound/tas2562.yaml b/Documentation/devicetree/bindings/sound/tas2562.yaml
index 31a3024ea789..f01c0dde0cf7 100644
--- a/Documentation/devicetree/bindings/sound/tas2562.yaml
+++ b/Documentation/devicetree/bindings/sound/tas2562.yaml
@@ -2,8 +2,8 @@
# Copyright (C) 2019 Texas Instruments Incorporated
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/sound/tas2562.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/sound/tas2562.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Texas Instruments TAS2562 Smart PA
diff --git a/Documentation/devicetree/bindings/sound/tas2770.yaml b/Documentation/devicetree/bindings/sound/tas2770.yaml
index 8908bf1122e9..be2536e8c440 100644
--- a/Documentation/devicetree/bindings/sound/tas2770.yaml
+++ b/Documentation/devicetree/bindings/sound/tas2770.yaml
@@ -2,8 +2,8 @@
# Copyright (C) 2019-20 Texas Instruments Incorporated
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/sound/tas2770.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/sound/tas2770.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Texas Instruments TAS2770 Smart PA
diff --git a/Documentation/devicetree/bindings/sound/tas27xx.yaml b/Documentation/devicetree/bindings/sound/tas27xx.yaml
index a876545ec87d..f2d878f6f495 100644
--- a/Documentation/devicetree/bindings/sound/tas27xx.yaml
+++ b/Documentation/devicetree/bindings/sound/tas27xx.yaml
@@ -2,8 +2,8 @@
# Copyright (C) 2020-2022 Texas Instruments Incorporated
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/sound/tas27xx.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/sound/tas27xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Texas Instruments TAS2764/TAS2780 Smart PA
diff --git a/Documentation/devicetree/bindings/sound/ti,tas2781.yaml b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml
new file mode 100644
index 000000000000..8d60e4e236d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 - 2023 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ti,tas2781.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TAS2781 SmartAMP
+
+maintainers:
+ - Shenghao Ding <shenghao-ding@ti.com>
+
+description:
+ The TAS2781 is a mono, digital input Class-D audio amplifier
+ optimized for efficiently driving high peak power into small
+ loudspeakers. An integrated on-chip DSP supports Texas Instruments
+ Smart Amp speaker protection algorithm. The integrated speaker
+ voltage and current sense provides for real time
+ monitoring of loudspeaker behavior.
+
+allOf:
+ - $ref: dai-common.yaml#
+
+properties:
+ compatible:
+ enum:
+ - ti,tas2781
+
+ reg:
+ description:
+ I2C address, in multiple tas2781s case, all the i2c address
+ aggreate as one Audio Device to support multiple audio slots.
+ maxItems: 8
+ minItems: 1
+ items:
+ minimum: 0x38
+ maximum: 0x3f
+
+ reset-gpios:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ '#sound-dai-cells':
+ const: 0
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ i2c {
+ /* example with quad tas2781s, such as tablet or pad device */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ quad_tas2781: tas2781@38 {
+ compatible = "ti,tas2781";
+ reg = <0x38>, /* Audio slot 0 */
+ <0x3a>, /* Audio slot 1 */
+ <0x39>, /* Audio slot 2 */
+ <0x3b>; /* Audio slot 3 */
+
+ #sound-dai-cells = <0>;
+ reset-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <15>;
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/sound/ti,tlv320aic32x4.yaml b/Documentation/devicetree/bindings/sound/ti,tlv320aic32x4.yaml
new file mode 100644
index 000000000000..a7cc9aa34468
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ti,tlv320aic32x4.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2019 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ti,tlv320aic32x4.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TLV320AIC32x4 Stereo Audio codec
+
+maintainers:
+ - Alexander Stein <alexander.stein@ew.tq-group.com>
+
+description: |
+ The TLV320AIC32x4 audio codec can be accessed using I2C or SPI
+
+properties:
+ compatible:
+ enum:
+ - ti,tas2505
+ - ti,tlv320aic32x4
+ - ti,tlv320aic32x6
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Master clock
+
+ clock-names:
+ items:
+ - const: mclk
+
+ av-supply:
+ description: Analog core power supply
+
+ dv-supply:
+ description: Digital core power supply
+
+ iov-supply:
+ description: Digital IO power supply
+
+ ldoin-supply:
+ description: LDO power supply
+
+ reset-gpios:
+ maxItems: 1
+
+ '#sound-dai-cells':
+ const: 0
+
+ aic32x4-gpio-func:
+ description: |
+ GPIO function configuration for pins MFP1-MFP5.
+ Types are defined in include/sound/tlv320aic32x4.h
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 5
+ maxItems: 5
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - iov-supply
+
+allOf:
+ - $ref: dai-common.yaml#
+ - if:
+ not:
+ required:
+ - ldoin-supply
+ then:
+ required:
+ - av-supply
+ - dv-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ audio-codec@18 {
+ compatible = "ti,tlv320aic32x4";
+ reg = <0x18>;
+ iov-supply = <&reg_3v3>;
+ ldoin-supply = <&reg_3v3>;
+ clocks = <&clks 201>;
+ clock-names = "mclk";
+ aic32x4-gpio-func= <
+ 0xff /* AIC32X4_MFPX_DEFAULT_VALUE */
+ 0xff /* AIC32X4_MFPX_DEFAULT_VALUE */
+ 0x04 /* MFP3 AIC32X4_MFP3_GPIO_ENABLED */
+ 0xff /* AIC32X4_MFPX_DEFAULT_VALUE */
+ 0x08 /* MFP5 AIC32X4_MFP5_GPIO_INPUT */
+ >;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/sound/ti,tlv320aic3x.yaml b/Documentation/devicetree/bindings/sound/ti,tlv320aic3x.yaml
index e8ca9f3369f8..206f6d61e362 100644
--- a/Documentation/devicetree/bindings/sound/ti,tlv320aic3x.yaml
+++ b/Documentation/devicetree/bindings/sound/ti,tlv320aic3x.yaml
@@ -61,6 +61,7 @@ properties:
GPIO specification for the active low RESET input.
gpio-reset:
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
maxItems: 1
description:
Deprecated, please use reset-gpios instead.
diff --git a/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt b/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt
deleted file mode 100644
index 0b4e21bde5bc..000000000000
--- a/Documentation/devicetree/bindings/sound/tlv320aic32x4.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-Texas Instruments - tlv320aic32x4 Codec module
-
-The tlv320aic32x4 serial control bus communicates through I2C protocols
-
-Required properties:
- - compatible - "string" - One of:
- "ti,tlv320aic32x4" TLV320AIC3204
- "ti,tlv320aic32x6" TLV320AIC3206, TLV320AIC3256
- "ti,tas2505" TAS2505, TAS2521
- - reg: I2C slave address
- - *-supply: Required supply regulators are:
- "iov" - digital IO power supply
- "ldoin" - LDO power supply
- "dv" - Digital core power supply
- "av" - Analog core power supply
- If you supply ldoin, dv and av are optional. Otherwise they are required
- See regulator/regulator.txt for more information about the detailed binding
- format.
-
-Optional properties:
- - reset-gpios: Reset-GPIO phandle with args as described in gpio/gpio.txt
- - clocks/clock-names: Clock named 'mclk' for the master clock of the codec.
- See clock/clock-bindings.txt for information about the detailed format.
- - aic32x4-gpio-func - <array of 5 int>
- - Types are defined in include/sound/tlv320aic32x4.h
-
-
-Example:
-
-codec: tlv320aic32x4@18 {
- compatible = "ti,tlv320aic32x4";
- reg = <0x18>;
- clocks = <&clks 201>;
- clock-names = "mclk";
- aic32x4-gpio-func= <
- 0xff /* AIC32X4_MFPX_DEFAULT_VALUE */
- 0xff /* AIC32X4_MFPX_DEFAULT_VALUE */
- 0x04 /* MFP3 AIC32X4_MFP3_GPIO_ENABLED */
- 0xff /* AIC32X4_MFPX_DEFAULT_VALUE */
- 0x08 /* MFP5 AIC32X4_MFP5_GPIO_INPUT */
- >;
-};
diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8903.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8903.yaml
index 7105ed5fd6c7..4cfa66f62681 100644
--- a/Documentation/devicetree/bindings/sound/wlf,wm8903.yaml
+++ b/Documentation/devicetree/bindings/sound/wlf,wm8903.yaml
@@ -1,8 +1,8 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/sound/wlf,wm8903.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/sound/wlf,wm8903.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: WM8903 audio codec
diff --git a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml
index e4dba825ab11..fb44b89a754e 100644
--- a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml
+++ b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml
@@ -21,6 +21,7 @@ properties:
- qcom,soundwire-v1.5.1
- qcom,soundwire-v1.6.0
- qcom,soundwire-v1.7.0
+ - qcom,soundwire-v2.0.0
reg:
maxItems: 1
@@ -80,18 +81,29 @@ properties:
or applicable for the respective data port.
More info in MIPI Alliance SoundWire 1.0 Specifications.
minItems: 3
- maxItems: 8
+ maxItems: 16
qcom,ports-sinterval-low:
$ref: /schemas/types.yaml#/definitions/uint8-array
description:
- Sample interval low of each data port.
+ Sample interval (only lowest byte) of each data port.
Out ports followed by In ports. Used for Sample Interval calculation.
Value of 0xff indicates that this option is not implemented
or applicable for the respective data port.
More info in MIPI Alliance SoundWire 1.0 Specifications.
minItems: 3
- maxItems: 8
+ maxItems: 16
+
+ qcom,ports-sinterval:
+ $ref: /schemas/types.yaml#/definitions/uint16-array
+ description:
+ Sample interval of each data port.
+ Out ports followed by In ports. Used for Sample Interval calculation.
+ Value of 0xffff indicates that this option is not implemented
+ or applicable for the respective data port.
+ More info in MIPI Alliance SoundWire 1.0 Specifications.
+ minItems: 3
+ maxItems: 16
qcom,ports-offset1:
$ref: /schemas/types.yaml#/definitions/uint8-array
@@ -102,7 +114,7 @@ properties:
or applicable for the respective data port.
More info in MIPI Alliance SoundWire 1.0 Specifications.
minItems: 3
- maxItems: 8
+ maxItems: 16
qcom,ports-offset2:
$ref: /schemas/types.yaml#/definitions/uint8-array
@@ -113,7 +125,7 @@ properties:
or applicable for the respective data port.
More info in MIPI Alliance SoundWire 1.0 Specifications.
minItems: 3
- maxItems: 8
+ maxItems: 16
qcom,ports-lane-control:
$ref: /schemas/types.yaml#/definitions/uint8-array
@@ -124,7 +136,7 @@ properties:
or applicable for the respective data port.
More info in MIPI Alliance SoundWire 1.0 Specifications.
minItems: 3
- maxItems: 8
+ maxItems: 16
qcom,ports-block-pack-mode:
$ref: /schemas/types.yaml#/definitions/uint8-array
@@ -137,7 +149,7 @@ properties:
or applicable for the respective data port.
More info in MIPI Alliance SoundWire 1.0 Specifications.
minItems: 3
- maxItems: 8
+ maxItems: 16
items:
oneOf:
- minimum: 0
@@ -154,7 +166,7 @@ properties:
or applicable for the respective data port.
More info in MIPI Alliance SoundWire 1.0 Specifications.
minItems: 3
- maxItems: 8
+ maxItems: 16
items:
oneOf:
- minimum: 0
@@ -171,7 +183,7 @@ properties:
or applicable for the respective data port.
More info in MIPI Alliance SoundWire 1.0 Specifications.
minItems: 3
- maxItems: 8
+ maxItems: 16
items:
oneOf:
- minimum: 0
@@ -187,7 +199,7 @@ properties:
or applicable for the respective data port.
More info in MIPI Alliance SoundWire 1.0 Specifications.
minItems: 3
- maxItems: 8
+ maxItems: 16
items:
oneOf:
- minimum: 0
@@ -219,10 +231,15 @@ required:
- '#size-cells'
- qcom,dout-ports
- qcom,din-ports
- - qcom,ports-sinterval-low
- qcom,ports-offset1
- qcom,ports-offset2
+oneOf:
+ - required:
+ - qcom,ports-sinterval-low
+ - required:
+ - qcom,ports-sinterval
+
additionalProperties: false
examples:
diff --git a/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml b/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml
index 2155478bfc4d..a6f34bdd1d3c 100644
--- a/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml
+++ b/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml
@@ -14,9 +14,6 @@ maintainers:
- Maxime Ripard <mripard@kernel.org>
properties:
- "#address-cells": true
- "#size-cells": true
-
compatible:
const: allwinner,sun4i-a10-spi
@@ -46,12 +43,9 @@ properties:
- const: rx
- const: tx
- num-cs: true
-
patternProperties:
"^.*@[0-9a-f]+":
type: object
- additionalProperties: true
properties:
reg:
items:
@@ -71,7 +65,7 @@ required:
- clocks
- clock-names
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml
index de36c6a34a0f..28b8ace63044 100644
--- a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml
+++ b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml
@@ -14,11 +14,9 @@ maintainers:
- Maxime Ripard <mripard@kernel.org>
properties:
- "#address-cells": true
- "#size-cells": true
-
compatible:
oneOf:
+ - const: allwinner,sun50i-r329-spi
- const: allwinner,sun6i-a31-spi
- const: allwinner,sun8i-h3-spi
- items:
@@ -28,6 +26,15 @@ properties:
- allwinner,sun50i-h616-spi
- allwinner,suniv-f1c100s-spi
- const: allwinner,sun8i-h3-spi
+ - items:
+ - enum:
+ - allwinner,sun20i-d1-spi
+ - allwinner,sun50i-r329-spi-dbi
+ - const: allwinner,sun50i-r329-spi
+ - items:
+ - const: allwinner,sun20i-d1-spi-dbi
+ - const: allwinner,sun50i-r329-spi-dbi
+ - const: allwinner,sun50i-r329-spi
reg:
maxItems: 1
@@ -58,12 +65,9 @@ properties:
- const: rx
- const: tx
- num-cs: true
-
patternProperties:
"^.*@[0-9a-f]+":
type: object
- additionalProperties: true
properties:
reg:
items:
@@ -83,7 +87,7 @@ required:
- clocks
- clock-names
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml b/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml
index 6c57dd6c3a36..58367587bfbc 100644
--- a/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml
+++ b/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml
@@ -20,6 +20,10 @@ properties:
- items:
- const: microchip,sam9x60-spi
- const: atmel,at91rm9200-spi
+ - items:
+ - const: microchip,sam9x7-spi
+ - const: microchip,sam9x60-spi
+ - const: atmel,at91rm9200-spi
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
index b310069762dd..4f15f9a0cc34 100644
--- a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
+++ b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
@@ -46,12 +46,28 @@ allOf:
maxItems: 2
items:
enum: [ qspi, qspi-ocp ]
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: amd,pensando-elba-qspi
+ then:
+ properties:
+ cdns,fifo-depth:
+ enum: [ 128, 256, 1024 ]
+ default: 1024
+ else:
+ properties:
+ cdns,fifo-depth:
+ enum: [ 128, 256 ]
+ default: 128
properties:
compatible:
oneOf:
- items:
- enum:
+ - amd,pensando-elba-qspi
- ti,k2g-qspi
- ti,am654-ospi
- intel,lgm-qspi
@@ -76,8 +92,6 @@ properties:
description:
Size of the data FIFO in words.
$ref: /schemas/types.yaml#/definitions/uint32
- enum: [ 128, 256 ]
- default: 128
cdns,fifo-width:
$ref: /schemas/types.yaml#/definitions/uint32
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
index ee8f7ea907b0..1696ac46a660 100644
--- a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
@@ -29,6 +29,9 @@ properties:
reg:
maxItems: 1
+ iommus:
+ maxItems: 1
+
interrupts:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/spi/renesas,rzv2m-csi.yaml b/Documentation/devicetree/bindings/spi/renesas,rzv2m-csi.yaml
new file mode 100644
index 000000000000..e59183e53690
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/renesas,rzv2m-csi.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/renesas,rzv2m-csi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/V2M Clocked Serial Interface (CSI)
+
+maintainers:
+ - Fabrizio Castro <fabrizio.castro.jz@renesas.com>
+ - Geert Uytterhoeven <geert+renesas@glider.be>
+
+allOf:
+ - $ref: spi-controller.yaml#
+
+properties:
+ compatible:
+ const: renesas,rzv2m-csi
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: The clock used to generate the output clock (CSICLK)
+ - description: Internal clock to access the registers (PCLK)
+
+ clock-names:
+ items:
+ - const: csiclk
+ - const: pclk
+
+ resets:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - resets
+ - power-domains
+ - '#address-cells'
+ - '#size-cells'
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/r9a09g011-cpg.h>
+ csi4: spi@a4020200 {
+ compatible = "renesas,rzv2m-csi";
+ reg = <0xa4020200 0x80>;
+ interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A09G011_CSI4_CLK>,
+ <&cpg CPG_MOD R9A09G011_CPERI_GRPH_PCLK>;
+ clock-names = "csiclk", "pclk";
+ resets = <&cpg R9A09G011_CSI_GPH_PRESETN>;
+ power-domains = <&cpg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/spi/samsung,spi.yaml b/Documentation/devicetree/bindings/spi/samsung,spi.yaml
index e0a465d70b0a..79da99ca0e53 100644
--- a/Documentation/devicetree/bindings/spi/samsung,spi.yaml
+++ b/Documentation/devicetree/bindings/spi/samsung,spi.yaml
@@ -35,8 +35,6 @@ properties:
minItems: 2
maxItems: 3
- cs-gpios: true
-
dmas:
minItems: 2
maxItems: 2
diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
index 12ca108864c6..a47cb144b09f 100644
--- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
+++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
@@ -74,6 +74,8 @@ properties:
const: intel,keembay-ssi
- description: Intel Thunder Bay SPI Controller
const: intel,thunderbay-ssi
+ - description: Intel Mount Evans Integrated Management Complex SPI Controller
+ const: intel,mountevans-imc-ssi
- description: AMD Pensando Elba SoC SPI Controller
const: amd,pensando-elba-spi
- description: Baikal-T1 SPI Controller
diff --git a/Documentation/devicetree/bindings/spi/socionext,uniphier-spi.yaml b/Documentation/devicetree/bindings/spi/socionext,uniphier-spi.yaml
index 597fc4e6b01c..c96131ebbea1 100644
--- a/Documentation/devicetree/bindings/spi/socionext,uniphier-spi.yaml
+++ b/Documentation/devicetree/bindings/spi/socionext,uniphier-spi.yaml
@@ -17,9 +17,6 @@ allOf:
- $ref: spi-controller.yaml#
properties:
- "#address-cells": true
- "#size-cells": true
-
compatible:
const: socionext,uniphier-scssi
diff --git a/Documentation/devicetree/bindings/spi/spi-cadence.yaml b/Documentation/devicetree/bindings/spi/spi-cadence.yaml
index b0f83b5c2cdd..b7552739b554 100644
--- a/Documentation/devicetree/bindings/spi/spi-cadence.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-cadence.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Cadence SPI controller
maintainers:
- - Michal Simek <michal.simek@xilinx.com>
+ - Michal Simek <michal.simek@amd.com>
allOf:
- $ref: spi-controller.yaml#
diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml
index 90945f59b7e8..524f6fe8c27b 100644
--- a/Documentation/devicetree/bindings/spi/spi-controller.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml
@@ -17,7 +17,7 @@ description: |
properties:
$nodename:
- pattern: "^spi(@.*|-[0-9a-f])*$"
+ pattern: "^spi(@.*|-([0-9]|[1-9][0-9]+))?$"
"#address-cells":
enum: [0, 1]
diff --git a/Documentation/devicetree/bindings/spi/spi-xilinx.yaml b/Documentation/devicetree/bindings/spi/spi-xilinx.yaml
index 6bd83836eded..4beb3af0416d 100644
--- a/Documentation/devicetree/bindings/spi/spi-xilinx.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-xilinx.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Xilinx SPI controller
maintainers:
- - Michal Simek <michal.simek@xilinx.com>
+ - Michal Simek <michal.simek@amd.com>
allOf:
- $ref: spi-controller.yaml#
diff --git a/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml
index 20f77246d365..e5199b109dad 100644
--- a/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Xilinx Zynq UltraScale+ MPSoC GQSPI controller
maintainers:
- - Michal Simek <michal.simek@xilinx.com>
+ - Michal Simek <michal.simek@amd.com>
allOf:
- $ref: spi-controller.yaml#
@@ -32,6 +32,12 @@ properties:
clocks:
maxItems: 2
+ iommus:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml b/Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml
index 83e8fb4a548d..7ea8fb42ce2c 100644
--- a/Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml
+++ b/Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml
@@ -14,7 +14,7 @@ allOf:
- $ref: spi-controller.yaml#
maintainers:
- - Michal Simek <michal.simek@xilinx.com>
+ - Michal Simek <michal.simek@amd.com>
# Everything else is described in the common file
properties:
diff --git a/Documentation/devicetree/bindings/spmi/mtk,spmi-mtk-pmif.yaml b/Documentation/devicetree/bindings/spmi/mtk,spmi-mtk-pmif.yaml
index abcbbe13723f..ac99883a3f29 100644
--- a/Documentation/devicetree/bindings/spmi/mtk,spmi-mtk-pmif.yaml
+++ b/Documentation/devicetree/bindings/spmi/mtk,spmi-mtk-pmif.yaml
@@ -14,13 +14,18 @@ description: |+
for multiple SoCs to control a single SPMI master.
allOf:
- - $ref: "spmi.yaml"
+ - $ref: spmi.yaml
properties:
compatible:
- enum:
- - mediatek,mt6873-spmi
- - mediatek,mt8195-spmi
+ oneOf:
+ - enum:
+ - mediatek,mt6873-spmi
+ - mediatek,mt8195-spmi
+ - items:
+ - enum:
+ - mediatek,mt8186-spmi
+ - const: mediatek,mt8195-spmi
reg:
maxItems: 2
diff --git a/Documentation/devicetree/bindings/sram/qcom,imem.yaml b/Documentation/devicetree/bindings/sram/qcom,imem.yaml
index 0548e8e0d30b..8025a852bc9c 100644
--- a/Documentation/devicetree/bindings/sram/qcom,imem.yaml
+++ b/Documentation/devicetree/bindings/sram/qcom,imem.yaml
@@ -18,8 +18,10 @@ properties:
items:
- enum:
- qcom,apq8064-imem
+ - qcom,msm8226-imem
- qcom,msm8974-imem
- qcom,qcs404-imem
+ - qcom,qdu1000-imem
- qcom,sc7180-imem
- qcom,sc7280-imem
- qcom,sdm630-imem
diff --git a/Documentation/devicetree/bindings/sram/sram.yaml b/Documentation/devicetree/bindings/sram/sram.yaml
index 993430be355b..0922d1f71ba8 100644
--- a/Documentation/devicetree/bindings/sram/sram.yaml
+++ b/Documentation/devicetree/bindings/sram/sram.yaml
@@ -94,6 +94,7 @@ patternProperties:
- samsung,exynos4210-sysram
- samsung,exynos4210-sysram-ns
- socionext,milbeaut-smp-sram
+ - stericsson,u8500-esram
reg:
description:
diff --git a/Documentation/devicetree/bindings/thermal/armada-thermal.txt b/Documentation/devicetree/bindings/thermal/armada-thermal.txt
index b0bee7e42038..ab8b8fccc7af 100644
--- a/Documentation/devicetree/bindings/thermal/armada-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/armada-thermal.txt
@@ -8,6 +8,7 @@ Required properties:
* marvell,armada380-thermal
* marvell,armadaxp-thermal
* marvell,armada-ap806-thermal
+ * marvell,armada-ap807-thermal
* marvell,armada-cp110-thermal
Note: these bindings are deprecated for AP806/CP110 and should instead
diff --git a/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt
deleted file mode 100644
index a3e9ec5dc7ac..000000000000
--- a/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Binding for Thermal Sensor driver for BCM2835 SoCs.
-
-Required parameters:
--------------------
-
-compatible: should be one of: "brcm,bcm2835-thermal",
- "brcm,bcm2836-thermal" or "brcm,bcm2837-thermal"
-reg: Address range of the thermal registers.
-clocks: Phandle of the clock used by the thermal sensor.
-#thermal-sensor-cells: should be 0 (see Documentation/devicetree/bindings/thermal/thermal-sensor.yaml)
-
-Example:
-
-thermal-zones {
- cpu_thermal: cpu-thermal {
- polling-delay-passive = <0>;
- polling-delay = <1000>;
-
- thermal-sensors = <&thermal>;
-
- trips {
- cpu-crit {
- temperature = <80000>;
- hysteresis = <0>;
- type = "critical";
- };
- };
-
- coefficients = <(-538) 407000>;
-
- cooling-maps {
- };
- };
-};
-
-thermal: thermal@7e212000 {
- compatible = "brcm,bcm2835-thermal";
- reg = <0x7e212000 0x8>;
- clocks = <&clocks BCM2835_CLOCK_TSENS>;
- #thermal-sensor-cells = <0>;
-};
diff --git a/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.yaml b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.yaml
new file mode 100644
index 000000000000..2b6026d9fbcf
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/brcm,bcm2835-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM2835 thermal sensor
+
+maintainers:
+ - Stefan Wahren <stefan.wahren@i2se.com>
+
+allOf:
+ - $ref: thermal-sensor.yaml#
+
+properties:
+ compatible:
+ enum:
+ - brcm,bcm2835-thermal
+ - brcm,bcm2836-thermal
+ - brcm,bcm2837-thermal
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ "#thermal-sensor-cells":
+ const: 0
+
+unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - '#thermal-sensor-cells'
+
+examples:
+ - |
+ #include <dt-bindings/clock/bcm2835.h>
+
+ thermal@7e212000 {
+ compatible = "brcm,bcm2835-thermal";
+ reg = <0x7e212000 0x8>;
+ clocks = <&clocks BCM2835_CLOCK_TSENS>;
+ #thermal-sensor-cells = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index d1ec963a6834..27e9e16e6455 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -29,6 +29,8 @@ properties:
items:
- enum:
- qcom,mdm9607-tsens
+ - qcom,msm8226-tsens
+ - qcom,msm8909-tsens
- qcom,msm8916-tsens
- qcom,msm8939-tsens
- qcom,msm8974-tsens
@@ -48,6 +50,7 @@ properties:
- qcom,msm8953-tsens
- qcom,msm8996-tsens
- qcom,msm8998-tsens
+ - qcom,qcm2290-tsens
- qcom,sc7180-tsens
- qcom,sc7280-tsens
- qcom,sc8180x-tsens
@@ -56,6 +59,7 @@ properties:
- qcom,sdm845-tsens
- qcom,sm6115-tsens
- qcom,sm6350-tsens
+ - qcom,sm6375-tsens
- qcom,sm8150-tsens
- qcom,sm8250-tsens
- qcom,sm8350-tsens
@@ -67,6 +71,12 @@ properties:
enum:
- qcom,ipq8074-tsens
+ - description: v2 of TSENS with combined interrupt
+ items:
+ - enum:
+ - qcom,ipq9574-tsens
+ - const: qcom,ipq8074-tsens
+
reg:
items:
- description: TM registers
@@ -223,12 +233,7 @@ allOf:
contains:
enum:
- qcom,ipq8064-tsens
- - qcom,mdm9607-tsens
- - qcom,msm8916-tsens
- qcom,msm8960-tsens
- - qcom,msm8974-tsens
- - qcom,msm8976-tsens
- - qcom,qcs404-tsens
- qcom,tsens-v0_1
- qcom,tsens-v1
then:
@@ -244,22 +249,7 @@ allOf:
properties:
compatible:
contains:
- enum:
- - qcom,msm8953-tsens
- - qcom,msm8996-tsens
- - qcom,msm8998-tsens
- - qcom,sc7180-tsens
- - qcom,sc7280-tsens
- - qcom,sc8180x-tsens
- - qcom,sc8280xp-tsens
- - qcom,sdm630-tsens
- - qcom,sdm845-tsens
- - qcom,sm6350-tsens
- - qcom,sm8150-tsens
- - qcom,sm8250-tsens
- - qcom,sm8350-tsens
- - qcom,sm8450-tsens
- - qcom,tsens-v2
+ const: qcom,tsens-v2
then:
properties:
interrupts:
diff --git a/Documentation/devicetree/bindings/timer/brcm,kona-timer.txt b/Documentation/devicetree/bindings/timer/brcm,kona-timer.txt
deleted file mode 100644
index 39adf54b4388..000000000000
--- a/Documentation/devicetree/bindings/timer/brcm,kona-timer.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Broadcom Kona Family timer
------------------------------------------------------
-This timer is used in the following Broadcom SoCs:
- BCM11130, BCM11140, BCM11351, BCM28145, BCM28155
-
-Required properties:
-- compatible : "brcm,kona-timer"
-- DEPRECATED: compatible : "bcm,kona-timer"
-- reg : Register range for the timer
-- interrupts : interrupt for the timer
-- clocks: phandle + clock specifier pair of the external clock
-- clock-frequency: frequency that the clock operates
-
-Only one of clocks or clock-frequency should be specified.
-
-Refer to clocks/clock-bindings.txt for generic clock consumer properties.
-
-Example:
- timer@35006000 {
- compatible = "brcm,kona-timer";
- reg = <0x35006000 0x1000>;
- interrupts = <0x0 7 0x4>;
- clocks = <&hub_timer_clk>;
- };
-
diff --git a/Documentation/devicetree/bindings/timer/brcm,kona-timer.yaml b/Documentation/devicetree/bindings/timer/brcm,kona-timer.yaml
new file mode 100644
index 000000000000..d6af8383d6fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/brcm,kona-timer.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/brcm,kona-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Kona family timer
+
+maintainers:
+ - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+ compatible:
+ const: brcm,kona-timer
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-frequency: true
+
+oneOf:
+ - required:
+ - clocks
+ - required:
+ - clock-frequency
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/bcm281xx.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ timer@35006000 {
+ compatible = "brcm,kona-timer";
+ reg = <0x35006000 0x1000>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&aon_ccu BCM281XX_AON_CCU_HUB_TIMER>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/timer/cdns,ttc.yaml b/Documentation/devicetree/bindings/timer/cdns,ttc.yaml
index bc5e6f226295..dbba780c9b02 100644
--- a/Documentation/devicetree/bindings/timer/cdns,ttc.yaml
+++ b/Documentation/devicetree/bindings/timer/cdns,ttc.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Cadence TTC - Triple Timer Counter
maintainers:
- - Michal Simek <michal.simek@xilinx.com>
+ - Michal Simek <michal.simek@amd.com>
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml b/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml
index 716c6afcca1f..dbe1267af06a 100644
--- a/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml
+++ b/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml
@@ -31,9 +31,13 @@ properties:
- enum:
- fsl,imx6sl-gpt
- fsl,imx6sx-gpt
+ - fsl,imx8mp-gpt
- fsl,imxrt1050-gpt
- fsl,imxrt1170-gpt
- const: fsl,imx6dl-gpt
+ - items:
+ - const: fsl,imx6ul-gpt
+ - const: fsl,imx6sx-gpt
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/timer/loongson,ls1x-pwmtimer.yaml b/Documentation/devicetree/bindings/timer/loongson,ls1x-pwmtimer.yaml
new file mode 100644
index 000000000000..ad61ae55850b
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/loongson,ls1x-pwmtimer.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/loongson,ls1x-pwmtimer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson-1 PWM timer
+
+maintainers:
+ - Keguang Zhang <keguang.zhang@gmail.com>
+
+description:
+ Loongson-1 PWM timer can be used for system clock source
+ and clock event timers.
+
+properties:
+ compatible:
+ const: loongson,ls1b-pwmtimer
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/loongson,ls1x-clk.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ clocksource: timer@1fe5c030 {
+ compatible = "loongson,ls1b-pwmtimer";
+ reg = <0x1fe5c030 0x10>;
+
+ clocks = <&clkc LS1X_CLKID_APB>;
+ interrupt-parent = <&intc0>;
+ interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+ };
diff --git a/Documentation/devicetree/bindings/timer/ralink,rt2880-timer.yaml b/Documentation/devicetree/bindings/timer/ralink,rt2880-timer.yaml
new file mode 100644
index 000000000000..daa7832babe3
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/ralink,rt2880-timer.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/ralink,rt2880-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Timer present in Ralink family SoCs
+
+maintainers:
+ - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+properties:
+ compatible:
+ const: ralink,rt2880-timer
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ timer@100 {
+ compatible = "ralink,rt2880-timer";
+ reg = <0x100 0x20>;
+
+ clocks = <&sysc 3>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <1>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/timer/sifive,clint.yaml b/Documentation/devicetree/bindings/timer/sifive,clint.yaml
index 94bef9424df1..a0185e15a42f 100644
--- a/Documentation/devicetree/bindings/timer/sifive,clint.yaml
+++ b/Documentation/devicetree/bindings/timer/sifive,clint.yaml
@@ -29,14 +29,15 @@ properties:
oneOf:
- items:
- enum:
- - sifive,fu540-c000-clint
- - starfive,jh7100-clint
- - starfive,jh7110-clint
- - canaan,k210-clint
- - const: sifive,clint0
+ - canaan,k210-clint # Canaan Kendryte K210
+ - sifive,fu540-c000-clint # SiFive FU540
+ - starfive,jh7100-clint # StarFive JH7100
+ - starfive,jh7110-clint # StarFive JH7110
+ - const: sifive,clint0 # SiFive CLINT v0 IP block
- items:
- enum:
- allwinner,sun20i-d1-clint
+ - thead,th1520-clint
- const: thead,c900-clint
- items:
- const: sifive,clint0
@@ -45,14 +46,9 @@ properties:
description: For the QEMU virt machine only
description:
- Should be "<vendor>,<chip>-clint" and "sifive,clint<version>".
- Supported compatible strings are -
- "sifive,fu540-c000-clint" for the SiFive CLINT v0 as integrated
- onto the SiFive FU540 chip, "canaan,k210-clint" for the SiFive
- CLINT v0 as integrated onto the Canaan Kendryte K210 chip, and
- "sifive,clint0" for the SiFive CLINT v0 IP block with no chip
- integration tweaks.
- Please refer to sifive-blocks-ip-versioning.txt for details
+ Should be "<vendor>,<chip>-clint", followed by "sifive,clint<version>"
+ when compatible with a SiFive CLINT. Please refer to
+ sifive-blocks-ip-versioning.txt for details regarding the latter.
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/timestamp/hardware-timestamps-common.yaml b/Documentation/devicetree/bindings/timestamp/hardware-timestamps-common.yaml
index fd6a7b51f571..95f42acd0c54 100644
--- a/Documentation/devicetree/bindings/timestamp/hardware-timestamps-common.yaml
+++ b/Documentation/devicetree/bindings/timestamp/hardware-timestamps-common.yaml
@@ -17,7 +17,7 @@ description:
properties:
$nodename:
- pattern: "^timestamp(@.*|-[0-9a-f])?$"
+ pattern: "^timestamp(@.*|-([0-9]|[1-9][0-9]+))?$"
"#timestamp-cells":
description:
diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
index 246863a9bc7e..ba2bfb547909 100644
--- a/Documentation/devicetree/bindings/trivial-devices.yaml
+++ b/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -139,6 +139,8 @@ properties:
- infineon,ir38164
# Infineon IR38263 Voltage Regulator
- infineon,ir38263
+ # Infineon IRPS5401 Voltage Regulator (PMIC)
+ - infineon,irps5401
# Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz)
- infineon,slb9635tt
# Infineon SLB9645 I2C TPM (new protocol, max 400khz)
diff --git a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
index c5a06c048389..bdfa86a0cc98 100644
--- a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
+++ b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
@@ -26,6 +26,7 @@ properties:
- qcom,msm8994-ufshc
- qcom,msm8996-ufshc
- qcom,msm8998-ufshc
+ - qcom,sa8775p-ufshc
- qcom,sc8280xp-ufshc
- qcom,sdm845-ufshc
- qcom,sm6350-ufshc
@@ -70,6 +71,10 @@ properties:
power-domains:
maxItems: 1
+ qcom,ice:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: phandle to the Inline Crypto Engine node
+
reg:
minItems: 1
maxItems: 2
@@ -105,6 +110,7 @@ allOf:
contains:
enum:
- qcom,msm8998-ufshc
+ - qcom,sa8775p-ufshc
- qcom,sc8280xp-ufshc
- qcom,sm8250-ufshc
- qcom,sm8350-ufshc
@@ -187,6 +193,25 @@ allOf:
# TODO: define clock bindings for qcom,msm8994-ufshc
+ - if:
+ required:
+ - qcom,ice
+ then:
+ properties:
+ reg:
+ maxItems: 1
+ clocks:
+ minItems: 8
+ maxItems: 8
+ else:
+ properties:
+ reg:
+ minItems: 1
+ maxItems: 2
+ clocks:
+ minItems: 8
+ maxItems: 11
+
unevaluatedProperties: false
examples:
diff --git a/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml b/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml
index a9988798898d..88cc1e3a0c88 100644
--- a/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml
+++ b/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml
@@ -54,7 +54,7 @@ properties:
const: ufs-phy
samsung,sysreg:
- $ref: '/schemas/types.yaml#/definitions/phandle-array'
+ $ref: /schemas/types.yaml#/definitions/phandle-array
description: Should be phandle/offset pair. The phandle to the syscon node
which indicates the FSYSx sysreg interface and the offset of
the control register for UFS io coherency setting.
diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml
index b26d26c2b023..782402800d4a 100644
--- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml
+++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml
@@ -45,7 +45,9 @@ properties:
- fsl,vf610-usb
- const: fsl,imx27-usb
- items:
- - const: fsl,imx8dxl-usb
+ - enum:
+ - fsl,imx8dxl-usb
+ - fsl,imx8ulp-usb
- const: fsl,imx7ulp-usb
- const: fsl,imx6ul-usb
- items:
diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml
index d3506090f8b1..0a5c98ea711d 100644
--- a/Documentation/devicetree/bindings/usb/dwc2.yaml
+++ b/Documentation/devicetree/bindings/usb/dwc2.yaml
@@ -53,6 +53,7 @@ properties:
- amlogic,meson8b-usb
- amlogic,meson-gxbb-usb
- amlogic,meson-g12a-usb
+ - amlogic,meson-a1-usb
- intel,socfpga-agilex-hsotg
- const: snps,dwc2
- const: amcc,dwc-otg
diff --git a/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml b/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml
index 098b73134a1b..bb373eb025a5 100644
--- a/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml
+++ b/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Xilinx SuperSpeed DWC3 USB SoC controller
maintainers:
- - Manish Narani <manish.narani@xilinx.com>
+ - Piyush Mehta <piyush.mehta@amd.com>
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/usb/fsl,imx8qm-cdns3.yaml b/Documentation/devicetree/bindings/usb/fsl,imx8qm-cdns3.yaml
new file mode 100644
index 000000000000..ceb76394af60
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/fsl,imx8qm-cdns3.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020 NXP
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/fsl,imx8qm-cdns3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP iMX8QM Soc USB Controller
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+properties:
+ compatible:
+ const: fsl,imx8qm-usb3
+
+ reg:
+ items:
+ - description: Register set for iMX USB3 Platform Control
+
+ "#address-cells":
+ enum: [ 1, 2 ]
+
+ "#size-cells":
+ enum: [ 1, 2 ]
+
+ ranges: true
+
+ clocks:
+ items:
+ - description: Standby clock. Used during ultra low power states.
+ - description: USB bus clock for usb3 controller.
+ - description: AXI clock for AXI interface.
+ - description: ipg clock for register access.
+ - description: Core clock for usb3 controller.
+
+ clock-names:
+ items:
+ - const: lpm
+ - const: bus
+ - const: aclk
+ - const: ipg
+ - const: core
+
+ power-domains:
+ maxItems: 1
+
+# Required child node:
+
+patternProperties:
+ "^usb@[0-9a-f]+$":
+ $ref: cdns,usb3.yaml#
+
+required:
+ - compatible
+ - reg
+ - "#address-cells"
+ - "#size-cells"
+ - ranges
+ - clocks
+ - clock-names
+ - power-domains
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx8-lpcg.h>
+ #include <dt-bindings/firmware/imx/rsrc.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ usb@5b110000 {
+ compatible = "fsl,imx8qm-usb3";
+ reg = <0x5b110000 0x10000>;
+ ranges;
+ clocks = <&usb3_lpcg IMX_LPCG_CLK_1>,
+ <&usb3_lpcg IMX_LPCG_CLK_0>,
+ <&usb3_lpcg IMX_LPCG_CLK_7>,
+ <&usb3_lpcg IMX_LPCG_CLK_4>,
+ <&usb3_lpcg IMX_LPCG_CLK_5>;
+ clock-names = "lpm", "bus", "aclk", "ipg", "core";
+ assigned-clocks = <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_MST_BUS>;
+ assigned-clock-rates = <250000000>;
+ power-domains = <&pd IMX_SC_R_USB_2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ usb@5b120000 {
+ compatible = "cdns,usb3";
+ reg = <0x5b120000 0x10000>, /* memory area for OTG/DRD registers */
+ <0x5b130000 0x10000>, /* memory area for HOST registers */
+ <0x5b140000 0x10000>; /* memory area for DEVICE registers */
+ reg-names = "otg", "xhci", "dev";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host", "peripheral", "otg", "wakeup";
+ phys = <&usb3_phy>;
+ phy-names = "cdns3,usb3-phy";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml
index 9445764bd8de..b956bb5fada7 100644
--- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml
+++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml
@@ -61,6 +61,7 @@ properties:
- ibm,476gtr-ehci
- nxp,lpc1850-ehci
- qca,ar7100-ehci
+ - rockchip,rk3588-ehci
- snps,hsdk-v1.0-ehci
- socionext,uniphier-ehci
- const: generic-ehci
diff --git a/Documentation/devicetree/bindings/usb/generic-ohci.yaml b/Documentation/devicetree/bindings/usb/generic-ohci.yaml
index d06d1e7d8876..be268e23ca79 100644
--- a/Documentation/devicetree/bindings/usb/generic-ohci.yaml
+++ b/Documentation/devicetree/bindings/usb/generic-ohci.yaml
@@ -44,6 +44,7 @@ properties:
- hpe,gxp-ohci
- ibm,476gtr-ohci
- ingenic,jz4740-ohci
+ - rockchip,rk3588-ohci
- snps,hsdk-v1.0-ohci
- const: generic-ohci
- enum:
@@ -69,7 +70,7 @@ properties:
clocks:
minItems: 1
- maxItems: 3
+ maxItems: 4
description: |
In case the Renesas R-Car Gen3 SoCs:
- if a host only channel: first clock should be host.
@@ -147,6 +148,20 @@ allOf:
then:
properties:
transceiver: false
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3588-ohci
+ then:
+ properties:
+ clocks:
+ minItems: 4
+ else:
+ properties:
+ clocks:
+ minItems: 1
+ maxItems: 3
unevaluatedProperties: false
diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
index 478214ab045e..a59d91243ac8 100644
--- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
@@ -304,7 +304,7 @@ examples:
# Dual role switch with type-c
- |
usb@11201000 {
- compatible ="mediatek,mt8183-mtu3", "mediatek,mtu3";
+ compatible = "mediatek,mt8183-mtu3", "mediatek,mtu3";
reg = <0x11201000 0x2e00>, <0x11203e00 0x0100>;
reg-names = "mac", "ippc";
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>;
diff --git a/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml b/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml
new file mode 100644
index 000000000000..ff3a1707ef57
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/microchip,usb5744.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip USB5744 4-port Hub Controller
+
+description:
+ Microchip's USB5744 SmartHubTM IC is a 4 port, SuperSpeed (SS)/Hi-Speed (HS),
+ low power, low pin count configurable and fully compliant with the USB 3.1
+ Gen 1 specification. The USB5744 also supports Full Speed (FS) and Low Speed
+ (LS) USB signaling, offering complete coverage of all defined USB operating
+ speeds. The new SuperSpeed hubs operate in parallel with the USB 2.0
+ controller, so 5 Gbps SuperSpeed data transfers are not affected by slower
+ USB 2.0 traffic.
+
+maintainers:
+ - Piyush Mehta <piyush.mehta@amd.com>
+ - Michal Simek <michal.simek@amd.com>
+
+properties:
+ compatible:
+ enum:
+ - usb424,2744
+ - usb424,5744
+ - microchip,usb5744
+
+ reg:
+ maxItems: 1
+
+ reset-gpios:
+ maxItems: 1
+ description:
+ GPIO controlling the GRST# pin.
+
+ vdd-supply:
+ description:
+ VDD power supply to the hub
+
+ peer-hub:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ phandle to the peer hub on the controller.
+
+ i2c-bus:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ phandle of an usb hub connected via i2c bus.
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: microchip,usb5744
+ then:
+ properties:
+ reset-gpios: false
+ vdd-supply: false
+ peer-hub: false
+ i2c-bus: false
+ else:
+ $ref: /schemas/usb/usb-device.yaml
+ required:
+ - peer-hub
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ i2c: i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ hub: usb-hub@2d {
+ compatible = "microchip,usb5744";
+ reg = <0x2d>;
+ };
+ };
+
+ usb {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* 2.0 hub on port 1 */
+ hub_2_0: hub@1 {
+ compatible = "usb424,2744";
+ reg = <1>;
+ peer-hub = <&hub_3_0>;
+ i2c-bus = <&hub>;
+ reset-gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ /* 3.0 hub on port 2 */
+ hub_3_0: hub@2 {
+ compatible = "usb424,5744";
+ reg = <2>;
+ peer-hub = <&hub_2_0>;
+ i2c-bus = <&hub>;
+ reset-gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml
index e2270ce0c56b..c6e661e8915c 100644
--- a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml
+++ b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml
@@ -91,6 +91,7 @@ properties:
phys:
minItems: 1
+ maxItems: 2
description:
Must contain an entry for each entry in phy-names.
See ../phy/phy-bindings.txt for details.
@@ -99,13 +100,7 @@ properties:
minItems: 1
items:
- const: usb2-0
- - const: usb2-1
- - const: usb2-2
- - const: usb2-3
- const: usb3-0
- - const: usb3-1
- - const: usb3-2
- - const: usb3-3
avddio-usb-supply:
description: PCIe/USB3 analog logic power supply. Must supply 1.05 V.
diff --git a/Documentation/devicetree/bindings/usb/onnn,nb7vpq904m.yaml b/Documentation/devicetree/bindings/usb/onnn,nb7vpq904m.yaml
new file mode 100644
index 000000000000..c0201da002f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/onnn,nb7vpq904m.yaml
@@ -0,0 +1,141 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/onnn,nb7vpq904m.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ON Semiconductor Type-C DisplayPort ALT Mode Linear Redriver
+
+maintainers:
+ - Neil Armstrong <neil.armstrong@linaro.org>
+
+properties:
+ compatible:
+ enum:
+ - onnn,nb7vpq904m
+
+ reg:
+ maxItems: 1
+
+ vcc-supply:
+ description: power supply (1.8V)
+
+ enable-gpios: true
+
+ retimer-switch:
+ description: Flag the port as possible handle of SuperSpeed signals retiming
+ type: boolean
+
+ orientation-switch:
+ description: Flag the port as possible handler of orientation switching
+ type: boolean
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Super Speed (SS) Output endpoint to the Type-C connector
+
+ port@1:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ description: Super Speed (SS) Input endpoint from the Super-Speed PHY
+ unevaluatedProperties: false
+
+ properties:
+ endpoint:
+ $ref: /schemas/graph.yaml#/$defs/endpoint-base
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description: |
+ An array of physical data lane indexes. Position determines how
+ lanes are connected to the redriver, It is assumed the same order
+ is kept on the other side of the redriver.
+ Lane number represents the following
+ - 0 is RX2 lane
+ - 1 is TX2 lane
+ - 2 is TX1 lane
+ - 3 is RX1 lane
+ The position determines the physical port of the redriver, in the
+ order A, B, C & D.
+ oneOf:
+ - items:
+ - const: 0
+ - const: 1
+ - const: 2
+ - const: 3
+ description: |
+ This is the lanes default layout
+ - Port A to RX2 lane
+ - Port B to TX2 lane
+ - Port C to TX1 lane
+ - Port D to RX1 lane
+ - items:
+ - const: 3
+ - const: 2
+ - const: 1
+ - const: 0
+ description: |
+ This is the USBRX2/USBTX2 and USBRX1/USBTX1 swapped lanes layout
+ - Port A to RX1 lane
+ - Port B to TX1 lane
+ - Port C to TX2 lane
+ - Port D to RX2 lane
+
+ port@2:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Sideband Use (SBU) AUX lines endpoint to the Type-C connector for the purpose of
+ handling altmode muxing and orientation switching.
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ typec-mux@32 {
+ compatible = "onnn,nb7vpq904m";
+ reg = <0x32>;
+
+ vcc-supply = <&vreg_l15b_1p8>;
+
+ retimer-switch;
+ orientation-switch;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ usb_con_ss: endpoint {
+ remote-endpoint = <&typec_con_ss>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ phy_con_ss: endpoint {
+ remote-endpoint = <&usb_phy_ss>;
+ data-lanes = <3 2 1 0>;
+ };
+ };
+ port@2 {
+ reg = <2>;
+ usb_con_sbu: endpoint {
+ remote-endpoint = <&typec_dp_aux>;
+ };
+ };
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
index d84281926f10..ae24dac78d9a 100644
--- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
@@ -17,12 +17,14 @@ properties:
- qcom,ipq6018-dwc3
- qcom,ipq8064-dwc3
- qcom,ipq8074-dwc3
+ - qcom,ipq9574-dwc3
- qcom,msm8953-dwc3
- qcom,msm8994-dwc3
- qcom,msm8996-dwc3
- qcom,msm8998-dwc3
- qcom,qcm2290-dwc3
- qcom,qcs404-dwc3
+ - qcom,sa8775p-dwc3
- qcom,sc7180-dwc3
- qcom,sc7280-dwc3
- qcom,sc8280xp-dwc3
@@ -133,7 +135,6 @@ required:
- "#address-cells"
- "#size-cells"
- ranges
- - power-domains
- clocks
- clock-names
- interrupts
@@ -177,9 +178,11 @@ allOf:
compatible:
contains:
enum:
+ - qcom,ipq9574-dwc3
- qcom,msm8953-dwc3
- qcom,msm8996-dwc3
- qcom,msm8998-dwc3
+ - qcom,sa8775p-dwc3
- qcom,sc7180-dwc3
- qcom,sc7280-dwc3
- qcom,sdm670-dwc3
@@ -455,6 +458,25 @@ allOf:
- const: dm_hs_phy_irq
- const: ss_phy_irq
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sa8775p-dwc3
+ then:
+ properties:
+ interrupts:
+ minItems: 3
+ maxItems: 4
+ interrupt-names:
+ minItems: 3
+ items:
+ - const: pwr_event
+ - const: dp_hs_phy_irq
+ - const: dm_hs_phy_irq
+ - const: ss_phy_irq
+
additionalProperties: false
examples:
diff --git a/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml b/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
new file mode 100644
index 000000000000..55df3129a0bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
@@ -0,0 +1,190 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/qcom,pmic-typec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PMIC based USB Type-C block
+
+maintainers:
+ - Bryan O'Donoghue <bryan.odonoghue@linaro.org>
+
+description:
+ Qualcomm PMIC Type-C block
+
+properties:
+ compatible:
+ enum:
+ - qcom,pm8150b-typec
+
+ connector:
+ type: object
+ $ref: /schemas/connector/usb-connector.yaml#
+ unevaluatedProperties: false
+
+ reg:
+ description: Type-C port and pdphy SPMI register base offsets
+ maxItems: 2
+
+ interrupts:
+ items:
+ - description: Type-C CC attach notification, VBUS error, tCCDebounce done
+ - description: Type-C VCONN powered
+ - description: Type-C CC state change
+ - description: Type-C VCONN over-current
+ - description: Type-C VBUS state change
+ - description: Type-C Attach/detach notification
+ - description: Type-C Legacy cable detect
+ - description: Type-C Try.Src Try.Snk state change
+ - description: Power Domain Signal TX - HardReset or CableReset signal TX
+ - description: Power Domain Signal RX - HardReset or CableReset signal RX
+ - description: Power Domain TX complete
+ - description: Power Domain RX complete
+ - description: Power Domain TX fail
+ - description: Power Domain TX message discard
+ - description: Power Domain RX message discard
+ - description: Power Domain Fast Role Swap event
+
+ interrupt-names:
+ items:
+ - const: or-rid-detect-change
+ - const: vpd-detect
+ - const: cc-state-change
+ - const: vconn-oc
+ - const: vbus-change
+ - const: attach-detach
+ - const: legacy-cable-detect
+ - const: try-snk-src-detect
+ - const: sig-tx
+ - const: sig-rx
+ - const: msg-tx
+ - const: msg-rx
+ - const: msg-tx-failed
+ - const: msg-tx-discarded
+ - const: msg-rx-discarded
+ - const: fr-swap
+
+ vdd-vbus-supply:
+ description: VBUS power supply.
+
+ vdd-pdphy-supply:
+ description: VDD regulator supply to the PDPHY.
+
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Contains a port which produces data-role switching messages.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+ - vdd-vbus-supply
+ - vdd-pdphy-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/usb/pd.h>
+
+ pmic {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pm8150b_typec: typec@1500 {
+ compatible = "qcom,pm8150b-typec";
+ reg = <0x1500>,
+ <0x1700>;
+
+ interrupts = <0x2 0x15 0x00 IRQ_TYPE_EDGE_RISING>,
+ <0x2 0x15 0x01 IRQ_TYPE_EDGE_BOTH>,
+ <0x2 0x15 0x02 IRQ_TYPE_EDGE_RISING>,
+ <0x2 0x15 0x03 IRQ_TYPE_EDGE_BOTH>,
+ <0x2 0x15 0x04 IRQ_TYPE_EDGE_RISING>,
+ <0x2 0x15 0x05 IRQ_TYPE_EDGE_RISING>,
+ <0x2 0x15 0x06 IRQ_TYPE_EDGE_BOTH>,
+ <0x2 0x15 0x07 IRQ_TYPE_EDGE_RISING>,
+ <0x2 0x17 0x00 IRQ_TYPE_EDGE_RISING>,
+ <0x2 0x17 0x01 IRQ_TYPE_EDGE_RISING>,
+ <0x2 0x17 0x02 IRQ_TYPE_EDGE_RISING>,
+ <0x2 0x17 0x03 IRQ_TYPE_EDGE_RISING>,
+ <0x2 0x17 0x04 IRQ_TYPE_EDGE_RISING>,
+ <0x2 0x17 0x05 IRQ_TYPE_EDGE_RISING>,
+ <0x2 0x17 0x06 IRQ_TYPE_EDGE_RISING>,
+ <0x2 0x17 0x07 IRQ_TYPE_EDGE_RISING>;
+
+ interrupt-names = "or-rid-detect-change",
+ "vpd-detect",
+ "cc-state-change",
+ "vconn-oc",
+ "vbus-change",
+ "attach-detach",
+ "legacy-cable-detect",
+ "try-snk-src-detect",
+ "sig-tx",
+ "sig-rx",
+ "msg-tx",
+ "msg-rx",
+ "msg-tx-failed",
+ "msg-tx-discarded",
+ "msg-rx-discarded",
+ "fr-swap";
+
+ vdd-vbus-supply = <&pm8150b_vbus>;
+ vdd-pdphy-supply = <&vreg_l2a_3p1>;
+
+ connector {
+ compatible = "usb-c-connector";
+
+ power-role = "source";
+ data-role = "dual";
+ self-powered;
+
+ source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_DUAL_ROLE |
+ PDO_FIXED_USB_COMM | PDO_FIXED_DATA_SWAP)>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ pmic_typec_mux_out: endpoint {
+ remote-endpoint = <&usb_phy_typec_mux_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ pmic_typec_role_switch_out: endpoint {
+ remote-endpoint = <&usb_role_switch_in>;
+ };
+ };
+ };
+ };
+ };
+ };
+
+ usb {
+ dr_mode = "otg";
+ usb-role-switch;
+ port {
+ usb_role_switch_in: endpoint {
+ remote-endpoint = <&pmic_typec_role_switch_out>;
+ };
+ };
+ };
+
+ usb-phy {
+ orientation-switch;
+ port {
+ usb_phy_typec_mux_in: endpoint {
+ remote-endpoint = <&pmic_typec_mux_out>;
+ };
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/usb/samsung,exynos-dwc3.yaml b/Documentation/devicetree/bindings/usb/samsung,exynos-dwc3.yaml
index 42ceaf13cd5d..deeed2bca2cd 100644
--- a/Documentation/devicetree/bindings/usb/samsung,exynos-dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/samsung,exynos-dwc3.yaml
@@ -72,7 +72,7 @@ allOf:
properties:
compatible:
contains:
- const: samsung,exynos54333-dwusb3
+ const: samsung,exynos5433-dwusb3
then:
properties:
clocks:
@@ -82,8 +82,8 @@ allOf:
items:
- const: aclk
- const: susp_clk
- - const: pipe_pclk
- const: phyclk
+ - const: pipe_pclk
- if:
properties:
diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
index 4f7625955ccc..a696f23730d3 100644
--- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
@@ -44,15 +44,15 @@ properties:
It's either a single common DWC3 interrupt (dwc_usb3) or individual
interrupts for the host, gadget and DRD modes.
minItems: 1
- maxItems: 3
+ maxItems: 4
interrupt-names:
minItems: 1
- maxItems: 3
+ maxItems: 4
oneOf:
- const: dwc_usb3
- items:
- enum: [host, peripheral, otg]
+ enum: [host, peripheral, otg, wakeup]
clocks:
description:
diff --git a/Documentation/devicetree/bindings/usb/starfive,jh7110-usb.yaml b/Documentation/devicetree/bindings/usb/starfive,jh7110-usb.yaml
new file mode 100644
index 000000000000..24aa9c10d6ab
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/starfive,jh7110-usb.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/starfive,jh7110-usb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 wrapper module for the Cadence USBSS-DRD controller
+
+maintainers:
+ - Minda Chen <minda.chen@starfivetech.com>
+
+properties:
+ compatible:
+ const: starfive,jh7110-usb
+
+ ranges: true
+
+ starfive,stg-syscon:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ - items:
+ - description: phandle to System Register Controller stg_syscon node.
+ - description: dr mode register offset of STG_SYSCONSAIF__SYSCFG register for USB.
+ description:
+ The phandle to System Register Controller syscon node and the offset
+ of STG_SYSCONSAIF__SYSCFG register for USB.
+
+ dr_mode:
+ enum: [host, otg, peripheral]
+
+ "#address-cells":
+ enum: [1, 2]
+
+ "#size-cells":
+ enum: [1, 2]
+
+ clocks:
+ items:
+ - description: link power management clock
+ - description: standby clock
+ - description: APB clock
+ - description: AXI clock
+ - description: UTMI APB clock
+
+ clock-names:
+ items:
+ - const: lpm
+ - const: stb
+ - const: apb
+ - const: axi
+ - const: utmi_apb
+
+ resets:
+ items:
+ - description: Power up reset
+ - description: APB clock reset
+ - description: AXI clock reset
+ - description: UTMI APB clock reset
+
+ reset-names:
+ items:
+ - const: pwrup
+ - const: apb
+ - const: axi
+ - const: utmi_apb
+
+patternProperties:
+ "^usb@[0-9a-f]+$":
+ $ref: cdns,usb3.yaml#
+ description: Required child node
+
+required:
+ - compatible
+ - ranges
+ - starfive,stg-syscon
+ - '#address-cells'
+ - '#size-cells'
+ - dr_mode
+ - clocks
+ - resets
+
+additionalProperties: false
+
+examples:
+ - |
+ usb@10100000 {
+ compatible = "starfive,jh7110-usb";
+ ranges = <0x0 0x10100000 0x100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ starfive,stg-syscon = <&stg_syscon 0x4>;
+ clocks = <&syscrg 4>,
+ <&stgcrg 5>,
+ <&stgcrg 1>,
+ <&stgcrg 3>,
+ <&stgcrg 2>;
+ clock-names = "lpm", "stb", "apb", "axi", "utmi_apb";
+ resets = <&stgcrg 10>,
+ <&stgcrg 8>,
+ <&stgcrg 7>,
+ <&stgcrg 9>;
+ reset-names = "pwrup", "apb", "axi", "utmi_apb";
+ dr_mode = "host";
+
+ usb@0 {
+ compatible = "cdns,usb3";
+ reg = <0x0 0x10000>,
+ <0x10000 0x10000>,
+ <0x20000 0x10000>;
+ reg-names = "otg", "xhci", "dev";
+ interrupts = <100>, <108>, <110>;
+ interrupt-names = "host", "peripheral", "otg";
+ maximum-speed = "super-speed";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml b/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml
index d25fc708e32c..fec5651f5602 100644
--- a/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml
+++ b/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml
@@ -92,7 +92,7 @@ examples:
usb@31100000 {
compatible = "snps,dwc3";
- reg =<0x00 0x31100000 0x00 0x50000>;
+ reg = <0x00 0x31100000 0x00 0x50000>;
interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
<GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */
interrupt-names = "host", "peripheral";
diff --git a/Documentation/devicetree/bindings/usb/usb251xb.yaml b/Documentation/devicetree/bindings/usb/usb251xb.yaml
index 4d1530816817..ac5b99710332 100644
--- a/Documentation/devicetree/bindings/usb/usb251xb.yaml
+++ b/Documentation/devicetree/bindings/usb/usb251xb.yaml
@@ -231,7 +231,7 @@ properties:
power-on sequence to a port until the port has adequate power.
swap-dx-lanes:
- $ref: /schemas/types.yaml#/definitions/uint8-array
+ $ref: /schemas/types.yaml#/definitions/uint32-array
description: |
Specifies the ports which will swap the differential-pair (D+/D-),
default is not-swapped.
diff --git a/Documentation/devicetree/bindings/usb/xlnx,usb2.yaml b/Documentation/devicetree/bindings/usb/xlnx,usb2.yaml
index 04c123c7252a..868dffe314bc 100644
--- a/Documentation/devicetree/bindings/usb/xlnx,usb2.yaml
+++ b/Documentation/devicetree/bindings/usb/xlnx,usb2.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Xilinx udc controller
maintainers:
- - Manish Narani <manish.narani@xilinx.com>
+ - Piyush Mehta <piyush.mehta@amd.com>
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 82d39ab0231b..af60bf1a6664 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -388,6 +388,8 @@ patternProperties:
description: EDIMAX Technology Co., Ltd
"^edt,.*":
description: Emerging Display Technologies
+ "^ees,.*":
+ description: Emtop Embedded Solutions
"^eeti,.*":
description: eGalax_eMPIA Technology Inc
"^einfochips,.*":
@@ -617,6 +619,8 @@ patternProperties:
description: Integrated Micro-Electronics Inc.
"^incircuit,.*":
description: In-Circuit GmbH
+ "^indiedroid,.*":
+ description: Indiedroid
"^inet-tek,.*":
description: Shenzhen iNet Mobile Internet Technology Co., Ltd
"^infineon,.*":
@@ -781,6 +785,8 @@ patternProperties:
description: Nanjing Loongmasses Ltd.
"^lsi,.*":
description: LSI Corp. (LSI Logic)
+ "^lunzn,.*":
+ description: Shenzhen Lunzn Technology Co., Ltd.
"^lwn,.*":
description: Liebherr-Werk Nenzing GmbH
"^lxa,.*":
@@ -1189,6 +1195,8 @@ patternProperties:
description: SHIFT GmbH
"^shimafuji,.*":
description: Shimafuji Electric, Inc.
+ "^shineworld,.*":
+ description: ShineWorld Innovations
"^shiratech,.*":
description: Shiratech Solutions
"^si-en,.*":
@@ -1267,6 +1275,8 @@ patternProperties:
description: SpinalHDL
"^sprd,.*":
description: Spreadtrum Communications Inc.
+ "^square,.*":
+ description: Square
"^ssi,.*":
description: SSI Computer Corp
"^sst,.*":
@@ -1339,6 +1349,8 @@ patternProperties:
description: Technologic Systems
"^techstar,.*":
description: Shenzhen Techstar Electronics Co., Ltd.
+ "^teejet,.*":
+ description: TeeJet
"^teltonika,.*":
description: Teltonika Networks
"^tempo,.*":
diff --git a/Documentation/devicetree/bindings/watchdog/brcm,kona-wdt.txt b/Documentation/devicetree/bindings/watchdog/brcm,kona-wdt.txt
deleted file mode 100644
index 2b86a00e351d..000000000000
--- a/Documentation/devicetree/bindings/watchdog/brcm,kona-wdt.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-Broadcom Kona Family Watchdog Timer
------------------------------------
-
-This watchdog timer is used in the following Broadcom SoCs:
- BCM11130, BCM11140, BCM11351, BCM28145, BCM28155
-
-Required properties:
- - compatible = "brcm,bcm11351-wdt", "brcm,kona-wdt";
- - reg: memory address & range
-
-Example:
- watchdog@35002f40 {
- compatible = "brcm,bcm11351-wdt", "brcm,kona-wdt";
- reg = <0x35002f40 0x6c>;
- };
diff --git a/Documentation/devicetree/bindings/watchdog/brcm,kona-wdt.yaml b/Documentation/devicetree/bindings/watchdog/brcm,kona-wdt.yaml
new file mode 100644
index 000000000000..3d4403b41cbe
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/brcm,kona-wdt.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/brcm,kona-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Kona Family Watchdog Timer
+
+description: |
+ This watchdog timer is used in the following Broadcom SoCs:
+ BCM11130, BCM11140, BCM11351, BCM28145, BCM28155
+
+maintainers:
+ - Florian Fainelli <f.fainelli@gmail.com>
+ - Ray Jui <rjui@broadcom.com>
+ - Scott Branden <sbranden@broadcom.com>
+
+allOf:
+ - $ref: watchdog.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: brcm,bcm11351-wdt
+ - const: brcm,kona-wdt
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ watchdog@35002f40 {
+ compatible = "brcm,bcm11351-wdt", "brcm,kona-wdt";
+ reg = <0x35002f40 0x6c>;
+ };
diff --git a/Documentation/devicetree/bindings/watchdog/cadence-wdt.txt b/Documentation/devicetree/bindings/watchdog/cadence-wdt.txt
deleted file mode 100644
index 750a87657448..000000000000
--- a/Documentation/devicetree/bindings/watchdog/cadence-wdt.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Zynq Watchdog Device Tree Bindings
--------------------------------------------
-
-Required properties:
-- compatible : Should be "cdns,wdt-r1p2".
-- clocks : This is pclk (APB clock).
-- interrupts : This is wd_irq - watchdog timeout interrupt.
-
-Optional properties
-- reset-on-timeout : If this property exists, then a reset is done
- when watchdog times out.
-- timeout-sec : Watchdog timeout value (in seconds).
-
-Example:
- watchdog@f8005000 {
- compatible = "cdns,wdt-r1p2";
- clocks = <&clkc 45>;
- interrupt-parent = <&intc>;
- interrupts = <0 9 1>;
- reg = <0xf8005000 0x1000>;
- reset-on-timeout;
- timeout-sec = <10>;
- };
diff --git a/Documentation/devicetree/bindings/watchdog/cdns,wdt-r1p2.yaml b/Documentation/devicetree/bindings/watchdog/cdns,wdt-r1p2.yaml
new file mode 100644
index 000000000000..3c17c5883bce
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/cdns,wdt-r1p2.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/cdns,wdt-r1p2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence watchdog timer controller
+
+maintainers:
+ - Neeli Srinivas <srinivas.neeli@amd.com>
+
+description:
+ The cadence watchdog timer is used to detect and recover from
+ system malfunctions. This watchdog contains 24 bit counter and
+ a programmable reset period. The timeout period varies from 1 ms
+ to 30 seconds while using a 100Mhz clock.
+
+allOf:
+ - $ref: watchdog.yaml#
+
+properties:
+ compatible:
+ enum:
+ - cdns,wdt-r1p2
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ reset-on-timeout:
+ type: boolean
+ description: |
+ If this property exists, then a reset is done when watchdog
+ times out.
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - interrupts
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ watchdog@f8005000 {
+ compatible = "cdns,wdt-r1p2";
+ reg = <0xf8005000 0x1000>;
+ clocks = <&clkc 45>;
+ interrupt-parent = <&intc>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_EDGE_RISING>;
+ reset-on-timeout;
+ timeout-sec = <10>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/watchdog/loongson,ls1x-wdt.yaml b/Documentation/devicetree/bindings/watchdog/loongson,ls1x-wdt.yaml
new file mode 100644
index 000000000000..81690d4b62a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/loongson,ls1x-wdt.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/loongson,ls1x-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson-1 Watchdog Timer
+
+maintainers:
+ - Keguang Zhang <keguang.zhang@gmail.com>
+
+allOf:
+ - $ref: watchdog.yaml#
+
+properties:
+ compatible:
+ enum:
+ - loongson,ls1b-wdt
+ - loongson,ls1c-wdt
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/loongson,ls1x-clk.h>
+ watchdog: watchdog@1fe5c060 {
+ compatible = "loongson,ls1b-wdt";
+ reg = <0x1fe5c060 0xc>;
+
+ clocks = <&clkc LS1X_CLKID_APB>;
+ };
diff --git a/Documentation/devicetree/bindings/watchdog/watchdog.yaml b/Documentation/devicetree/bindings/watchdog/watchdog.yaml
index 519b48889eb1..f0a584af1223 100644
--- a/Documentation/devicetree/bindings/watchdog/watchdog.yaml
+++ b/Documentation/devicetree/bindings/watchdog/watchdog.yaml
@@ -17,11 +17,11 @@ description: |
select:
properties:
$nodename:
- pattern: "^watchdog(@.*|-[0-9a-f])?$"
+ pattern: "^watchdog(@.*|-([0-9]|[1-9][0-9]+))?$"
properties:
$nodename:
- pattern: "^(timer|watchdog)(@.*|-[0-9a-f])?$"
+ pattern: "^(timer|watchdog)(@.*|-([0-9]|[1-9][0-9]+))?$"
timeout-sec:
description:
diff --git a/Documentation/devicetree/bindings/watchdog/xlnx,versal-wwdt.yaml b/Documentation/devicetree/bindings/watchdog/xlnx,versal-wwdt.yaml
new file mode 100644
index 000000000000..14b069599740
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/xlnx,versal-wwdt.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/xlnx,versal-wwdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Versal window watchdog timer controller
+
+maintainers:
+ - Neeli Srinivas <srinivas.neeli@amd.com>
+
+description:
+ Versal watchdog intellectual property uses window watchdog mode.
+ Window watchdog timer(WWDT) contains closed(first) and open(second)
+ window with 32 bit width. Write to the watchdog timer within
+ predefined window periods of time. This means a period that is not
+ too soon and a period that is not too late. The WWDT has to be
+ restarted within the open window time. If software tries to restart
+ WWDT outside of the open window time period, it generates a reset.
+
+allOf:
+ - $ref: watchdog.yaml#
+
+properties:
+ compatible:
+ enum:
+ - xlnx,versal-wwdt
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ watchdog@fd4d0000 {
+ compatible = "xlnx,versal-wwdt";
+ reg = <0xfd4d0000 0x10000>;
+ clocks = <&clock25>;
+ timeout-sec = <30>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/watchdog/xlnx,xps-timebase-wdt.yaml b/Documentation/devicetree/bindings/watchdog/xlnx,xps-timebase-wdt.yaml
index 8444c56dd602..dc1ff39d05a0 100644
--- a/Documentation/devicetree/bindings/watchdog/xlnx,xps-timebase-wdt.yaml
+++ b/Documentation/devicetree/bindings/watchdog/xlnx,xps-timebase-wdt.yaml
@@ -7,8 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Xilinx AXI/PLB softcore and window Watchdog Timer
maintainers:
- - Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
- - Srinivas Neeli <srinivas.neeli@xilinx.com>
+ - Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
+ - Srinivas Neeli <srinivas.neeli@amd.com>
description:
The Timebase watchdog timer(WDT) is a free-running 32 bit counter.