diff options
Diffstat (limited to 'Documentation/ABI/testing')
30 files changed, 1058 insertions, 104 deletions
diff --git a/Documentation/ABI/testing/debugfs-driver-habanalabs b/Documentation/ABI/testing/debugfs-driver-habanalabs index 042fd125fbc9..a7a432dc4015 100644 --- a/Documentation/ABI/testing/debugfs-driver-habanalabs +++ b/Documentation/ABI/testing/debugfs-driver-habanalabs @@ -1,4 +1,4 @@ -What: /sys/kernel/debug/accel/<n>/addr +What: /sys/kernel/debug/accel/<parent_device>/addr Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org @@ -8,34 +8,34 @@ Description: Sets the device address to be used for read or write through only when the IOMMU is disabled. The acceptable value is a string that starts with "0x" -What: /sys/kernel/debug/accel/<n>/clk_gate +What: /sys/kernel/debug/accel/<parent_device>/clk_gate Date: May 2020 KernelVersion: 5.8 Contact: ogabbay@kernel.org Description: This setting is now deprecated as clock gating is handled solely by the f/w -What: /sys/kernel/debug/accel/<n>/command_buffers +What: /sys/kernel/debug/accel/<parent_device>/command_buffers Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org Description: Displays a list with information about the currently allocated command buffers -What: /sys/kernel/debug/accel/<n>/command_submission +What: /sys/kernel/debug/accel/<parent_device>/command_submission Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org Description: Displays a list with information about the currently active command submissions -What: /sys/kernel/debug/accel/<n>/command_submission_jobs +What: /sys/kernel/debug/accel/<parent_device>/command_submission_jobs Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org Description: Displays a list with detailed information about each JOB (CB) of each active command submission -What: /sys/kernel/debug/accel/<n>/data32 +What: /sys/kernel/debug/accel/<parent_device>/data32 Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org @@ -50,7 +50,7 @@ Description: Allows the root user to read or write directly through the If the IOMMU is disabled, it also allows the root user to read or write from the host a device VA of a host mapped memory -What: /sys/kernel/debug/accel/<n>/data64 +What: /sys/kernel/debug/accel/<parent_device>/data64 Date: Jan 2020 KernelVersion: 5.6 Contact: ogabbay@kernel.org @@ -65,7 +65,7 @@ Description: Allows the root user to read or write 64 bit data directly If the IOMMU is disabled, it also allows the root user to read or write from the host a device VA of a host mapped memory -What: /sys/kernel/debug/accel/<n>/data_dma +What: /sys/kernel/debug/accel/<parent_device>/data_dma Date: Apr 2021 KernelVersion: 5.13 Contact: ogabbay@kernel.org @@ -83,7 +83,7 @@ Description: Allows the root user to read from the device's internal workloads. Only supported on GAUDI at this stage. -What: /sys/kernel/debug/accel/<n>/device +What: /sys/kernel/debug/accel/<parent_device>/device Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org @@ -91,14 +91,14 @@ Description: Enables the root user to set the device to specific state. Valid values are "disable", "enable", "suspend", "resume". User can read this property to see the valid values -What: /sys/kernel/debug/accel/<n>/device_release_watchdog_timeout +What: /sys/kernel/debug/accel/<parent_device>/device_release_watchdog_timeout Date: Oct 2022 KernelVersion: 6.2 Contact: ttayar@habana.ai Description: The watchdog timeout value in seconds for a device release upon certain error cases, after which the device is reset. -What: /sys/kernel/debug/accel/<n>/dma_size +What: /sys/kernel/debug/accel/<parent_device>/dma_size Date: Apr 2021 KernelVersion: 5.13 Contact: ogabbay@kernel.org @@ -108,7 +108,7 @@ Description: Specify the size of the DMA transaction when using DMA to read When the write is finished, the user can read the "data_dma" blob -What: /sys/kernel/debug/accel/<n>/dump_razwi_events +What: /sys/kernel/debug/accel/<parent_device>/dump_razwi_events Date: Aug 2022 KernelVersion: 5.20 Contact: fkassabri@habana.ai @@ -117,7 +117,7 @@ Description: Dumps all razwi events to dmesg if exist. the routine will clear the status register. Usage: cat dump_razwi_events -What: /sys/kernel/debug/accel/<n>/dump_security_violations +What: /sys/kernel/debug/accel/<parent_device>/dump_security_violations Date: Jan 2021 KernelVersion: 5.12 Contact: ogabbay@kernel.org @@ -125,14 +125,14 @@ Description: Dumps all security violations to dmesg. This will also ack all security violations meanings those violations will not be dumped next time user calls this API -What: /sys/kernel/debug/accel/<n>/engines +What: /sys/kernel/debug/accel/<parent_device>/engines Date: Jul 2019 KernelVersion: 5.3 Contact: ogabbay@kernel.org Description: Displays the status registers values of the device engines and their derived idle status -What: /sys/kernel/debug/accel/<n>/i2c_addr +What: /sys/kernel/debug/accel/<parent_device>/i2c_addr Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org @@ -140,7 +140,7 @@ Description: Sets I2C device address for I2C transaction that is generated by the device's CPU, Not available when device is loaded with secured firmware -What: /sys/kernel/debug/accel/<n>/i2c_bus +What: /sys/kernel/debug/accel/<parent_device>/i2c_bus Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org @@ -148,7 +148,7 @@ Description: Sets I2C bus address for I2C transaction that is generated by the device's CPU, Not available when device is loaded with secured firmware -What: /sys/kernel/debug/accel/<n>/i2c_data +What: /sys/kernel/debug/accel/<parent_device>/i2c_data Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org @@ -157,7 +157,7 @@ Description: Triggers an I2C transaction that is generated by the device's reading from the file generates a read transaction, Not available when device is loaded with secured firmware -What: /sys/kernel/debug/accel/<n>/i2c_len +What: /sys/kernel/debug/accel/<parent_device>/i2c_len Date: Dec 2021 KernelVersion: 5.17 Contact: obitton@habana.ai @@ -165,7 +165,7 @@ Description: Sets I2C length in bytes for I2C transaction that is generated b the device's CPU, Not available when device is loaded with secured firmware -What: /sys/kernel/debug/accel/<n>/i2c_reg +What: /sys/kernel/debug/accel/<parent_device>/i2c_reg Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org @@ -173,35 +173,35 @@ Description: Sets I2C register id for I2C transaction that is generated by the device's CPU, Not available when device is loaded with secured firmware -What: /sys/kernel/debug/accel/<n>/led0 +What: /sys/kernel/debug/accel/<parent_device>/led0 Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org Description: Sets the state of the first S/W led on the device, Not available when device is loaded with secured firmware -What: /sys/kernel/debug/accel/<n>/led1 +What: /sys/kernel/debug/accel/<parent_device>/led1 Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org Description: Sets the state of the second S/W led on the device, Not available when device is loaded with secured firmware -What: /sys/kernel/debug/accel/<n>/led2 +What: /sys/kernel/debug/accel/<parent_device>/led2 Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org Description: Sets the state of the third S/W led on the device, Not available when device is loaded with secured firmware -What: /sys/kernel/debug/accel/<n>/memory_scrub +What: /sys/kernel/debug/accel/<parent_device>/memory_scrub Date: May 2022 KernelVersion: 5.19 Contact: dhirschfeld@habana.ai Description: Allows the root user to scrub the dram memory. The scrubbing value can be set using the debugfs file memory_scrub_val. -What: /sys/kernel/debug/accel/<n>/memory_scrub_val +What: /sys/kernel/debug/accel/<parent_device>/memory_scrub_val Date: May 2022 KernelVersion: 5.19 Contact: dhirschfeld@habana.ai @@ -209,7 +209,7 @@ Description: The value to which the dram will be set to when the user scrubs the dram using 'memory_scrub' debugfs file and the scrubbing value when using module param 'memory_scrub' -What: /sys/kernel/debug/accel/<n>/mmu +What: /sys/kernel/debug/accel/<parent_device>/mmu Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org @@ -219,7 +219,7 @@ Description: Displays the hop values and physical address for a given ASID e.g. to display info about VA 0x1000 for ASID 1 you need to do: echo "1 0x1000" > /sys/kernel/debug/accel/0/mmu -What: /sys/kernel/debug/accel/<n>/mmu_error +What: /sys/kernel/debug/accel/<parent_device>/mmu_error Date: Mar 2021 KernelVersion: 5.12 Contact: fkassabri@habana.ai @@ -229,7 +229,7 @@ Description: Check and display page fault or access violation mmu errors for echo "0x200" > /sys/kernel/debug/accel/0/mmu_error cat /sys/kernel/debug/accel/0/mmu_error -What: /sys/kernel/debug/accel/<n>/monitor_dump +What: /sys/kernel/debug/accel/<parent_device>/monitor_dump Date: Mar 2022 KernelVersion: 5.19 Contact: osharabi@habana.ai @@ -243,7 +243,7 @@ Description: Allows the root user to dump monitors status from the device's This interface doesn't support concurrency in the same device. Only supported on GAUDI. -What: /sys/kernel/debug/accel/<n>/monitor_dump_trig +What: /sys/kernel/debug/accel/<parent_device>/monitor_dump_trig Date: Mar 2022 KernelVersion: 5.19 Contact: osharabi@habana.ai @@ -253,14 +253,14 @@ Description: Triggers dump of monitor data. The value to trigger the operatio When the write is finished, the user can read the "monitor_dump" blob -What: /sys/kernel/debug/accel/<n>/set_power_state +What: /sys/kernel/debug/accel/<parent_device>/set_power_state Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org Description: Sets the PCI power state. Valid values are "1" for D0 and "2" for D3Hot -What: /sys/kernel/debug/accel/<n>/skip_reset_on_timeout +What: /sys/kernel/debug/accel/<parent_device>/skip_reset_on_timeout Date: Jun 2021 KernelVersion: 5.13 Contact: ynudelman@habana.ai @@ -268,7 +268,7 @@ Description: Sets the skip reset on timeout option for the device. Value of "0" means device will be reset in case some CS has timed out, otherwise it will not be reset. -What: /sys/kernel/debug/accel/<n>/state_dump +What: /sys/kernel/debug/accel/<parent_device>/state_dump Date: Oct 2021 KernelVersion: 5.15 Contact: ynudelman@habana.ai @@ -279,7 +279,7 @@ Description: Gets the state dump occurring on a CS timeout or failure. Writing an integer X discards X state dumps, so that the next read would return X+1-st newest state dump. -What: /sys/kernel/debug/accel/<n>/stop_on_err +What: /sys/kernel/debug/accel/<parent_device>/stop_on_err Date: Mar 2020 KernelVersion: 5.6 Contact: ogabbay@kernel.org @@ -287,13 +287,13 @@ Description: Sets the stop-on_error option for the device engines. Value of "0" is for disable, otherwise enable. Relevant only for GOYA and GAUDI. -What: /sys/kernel/debug/accel/<n>/timeout_locked +What: /sys/kernel/debug/accel/<parent_device>/timeout_locked Date: Sep 2021 KernelVersion: 5.16 Contact: obitton@habana.ai Description: Sets the command submission timeout value in seconds. -What: /sys/kernel/debug/accel/<n>/userptr +What: /sys/kernel/debug/accel/<parent_device>/userptr Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org @@ -301,7 +301,7 @@ Description: Displays a list with information about the current user pointers (user virtual addresses) that are pinned and mapped to DMA addresses -What: /sys/kernel/debug/accel/<n>/userptr_lookup +What: /sys/kernel/debug/accel/<parent_device>/userptr_lookup Date: Oct 2021 KernelVersion: 5.15 Contact: ogabbay@kernel.org @@ -309,7 +309,7 @@ Description: Allows to search for specific user pointers (user virtual addresses) that are pinned and mapped to DMA addresses, and see their resolution to the specific dma address. -What: /sys/kernel/debug/accel/<n>/vm +What: /sys/kernel/debug/accel/<parent_device>/vm Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org diff --git a/Documentation/ABI/testing/debugfs-driver-qat_telemetry b/Documentation/ABI/testing/debugfs-driver-qat_telemetry new file mode 100644 index 000000000000..eacee2072088 --- /dev/null +++ b/Documentation/ABI/testing/debugfs-driver-qat_telemetry @@ -0,0 +1,228 @@ +What: /sys/kernel/debug/qat_<device>_<BDF>/telemetry/control +Date: March 2024 +KernelVersion: 6.8 +Contact: qat-linux@intel.com +Description: (RW) Enables/disables the reporting of telemetry metrics. + + Allowed values to write: + ======================== + * 0: disable telemetry + * 1: enable telemetry + * 2, 3, 4: enable telemetry and calculate minimum, maximum + and average for each counter over 2, 3 or 4 samples + + Returned values: + ================ + * 1-4: telemetry is enabled and running + * 0: telemetry is disabled + + Example. + + Writing '3' to this file starts the collection of + telemetry metrics. Samples are collected every second and + stored in a circular buffer of size 3. These values are then + used to calculate the minimum, maximum and average for each + counter. After enabling, counters can be retrieved through + the ``device_data`` file:: + + echo 3 > /sys/kernel/debug/qat_4xxx_0000:6b:00.0/telemetry/control + + Writing '0' to this file stops the collection of telemetry + metrics:: + + echo 0 > /sys/kernel/debug/qat_4xxx_0000:6b:00.0/telemetry/control + + This attribute is only available for qat_4xxx devices. + +What: /sys/kernel/debug/qat_<device>_<BDF>/telemetry/device_data +Date: March 2024 +KernelVersion: 6.8 +Contact: qat-linux@intel.com +Description: (RO) Reports device telemetry counters. + Reads report metrics about performance and utilization of + a QAT device: + + ======================= ======================================== + Field Description + ======================= ======================================== + sample_cnt number of acquisitions of telemetry data + from the device. Reads are performed + every 1000 ms. + pci_trans_cnt number of PCIe partial transactions + max_rd_lat maximum logged read latency [ns] (could + be any read operation) + rd_lat_acc_avg average read latency [ns] + max_gp_lat max get to put latency [ns] (only takes + samples for AE0) + gp_lat_acc_avg average get to put latency [ns] + bw_in PCIe, write bandwidth [Mbps] + bw_out PCIe, read bandwidth [Mbps] + at_page_req_lat_avg Address Translator(AT), average page + request latency [ns] + at_trans_lat_avg AT, average page translation latency [ns] + at_max_tlb_used AT, maximum uTLB used + util_cpr<N> utilization of Compression slice N [%] + exec_cpr<N> execution count of Compression slice N + util_xlt<N> utilization of Translator slice N [%] + exec_xlt<N> execution count of Translator slice N + util_dcpr<N> utilization of Decompression slice N [%] + exec_dcpr<N> execution count of Decompression slice N + util_pke<N> utilization of PKE N [%] + exec_pke<N> execution count of PKE N + util_ucs<N> utilization of UCS slice N [%] + exec_ucs<N> execution count of UCS slice N + util_wat<N> utilization of Wireless Authentication + slice N [%] + exec_wat<N> execution count of Wireless Authentication + slice N + util_wcp<N> utilization of Wireless Cipher slice N [%] + exec_wcp<N> execution count of Wireless Cipher slice N + util_cph<N> utilization of Cipher slice N [%] + exec_cph<N> execution count of Cipher slice N + util_ath<N> utilization of Authentication slice N [%] + exec_ath<N> execution count of Authentication slice N + ======================= ======================================== + + The telemetry report file can be read with the following command:: + + cat /sys/kernel/debug/qat_4xxx_0000:6b:00.0/telemetry/device_data + + If ``control`` is set to 1, only the current values of the + counters are displayed:: + + <counter_name> <current> + + If ``control`` is 2, 3 or 4, counters are displayed in the + following format:: + + <counter_name> <current> <min> <max> <avg> + + If a device lacks of a specific accelerator, the corresponding + attribute is not reported. + + This attribute is only available for qat_4xxx devices. + +What: /sys/kernel/debug/qat_<device>_<BDF>/telemetry/rp_<A/B/C/D>_data +Date: March 2024 +KernelVersion: 6.8 +Contact: qat-linux@intel.com +Description: (RW) Selects up to 4 Ring Pairs (RP) to monitor, one per file, + and report telemetry counters related to each. + + Allowed values to write: + ======================== + * 0 to ``<num_rps - 1>``: + Ring pair to be monitored. The value of ``num_rps`` can be + retrieved through ``/sys/bus/pci/devices/<BDF>/qat/num_rps``. + See Documentation/ABI/testing/sysfs-driver-qat. + + Reads report metrics about performance and utilization of + the selected RP: + + ======================= ======================================== + Field Description + ======================= ======================================== + sample_cnt number of acquisitions of telemetry data + from the device. Reads are performed + every 1000 ms + rp_num RP number associated with slot <A/B/C/D> + service_type service associated to the RP + pci_trans_cnt number of PCIe partial transactions + gp_lat_acc_avg average get to put latency [ns] + bw_in PCIe, write bandwidth [Mbps] + bw_out PCIe, read bandwidth [Mbps] + at_glob_devtlb_hit Message descriptor DevTLB hit rate + at_glob_devtlb_miss Message descriptor DevTLB miss rate + tl_at_payld_devtlb_hit Payload DevTLB hit rate + tl_at_payld_devtlb_miss Payload DevTLB miss rate + ======================= ======================================== + + Example. + + Writing the value '32' to the file ``rp_C_data`` starts the + collection of telemetry metrics for ring pair 32:: + + echo 32 > /sys/kernel/debug/qat_4xxx_0000:6b:00.0/telemetry/rp_C_data + + Once a ring pair is selected, statistics can be read accessing + the file:: + + cat /sys/kernel/debug/qat_4xxx_0000:6b:00.0/telemetry/rp_C_data + + If ``control`` is set to 1, only the current values of the + counters are displayed:: + + <counter_name> <current> + + If ``control`` is 2, 3 or 4, counters are displayed in the + following format:: + + <counter_name> <current> <min> <max> <avg> + + + On QAT GEN4 devices there are 64 RPs on a PF, so the allowed + values are 0..63. This number is absolute to the device. + If Virtual Functions (VF) are used, the ring pair number can + be derived from the Bus, Device, Function of the VF: + + ============ ====== ====== ====== ====== + PCI BDF/VF RP0 RP1 RP2 RP3 + ============ ====== ====== ====== ====== + 0000:6b:0.1 RP 0 RP 1 RP 2 RP 3 + 0000:6b:0.2 RP 4 RP 5 RP 6 RP 7 + 0000:6b:0.3 RP 8 RP 9 RP 10 RP 11 + 0000:6b:0.4 RP 12 RP 13 RP 14 RP 15 + 0000:6b:0.5 RP 16 RP 17 RP 18 RP 19 + 0000:6b:0.6 RP 20 RP 21 RP 22 RP 23 + 0000:6b:0.7 RP 24 RP 25 RP 26 RP 27 + 0000:6b:1.0 RP 28 RP 29 RP 30 RP 31 + 0000:6b:1.1 RP 32 RP 33 RP 34 RP 35 + 0000:6b:1.2 RP 36 RP 37 RP 38 RP 39 + 0000:6b:1.3 RP 40 RP 41 RP 42 RP 43 + 0000:6b:1.4 RP 44 RP 45 RP 46 RP 47 + 0000:6b:1.5 RP 48 RP 49 RP 50 RP 51 + 0000:6b:1.6 RP 52 RP 53 RP 54 RP 55 + 0000:6b:1.7 RP 56 RP 57 RP 58 RP 59 + 0000:6b:2.0 RP 60 RP 61 RP 62 RP 63 + ============ ====== ====== ====== ====== + + The mapping is only valid for the BDFs of VFs on the host. + + + The service provided on a ring-pair varies depending on the + configuration. The configuration for a given device can be + queried and set using ``cfg_services``. + See Documentation/ABI/testing/sysfs-driver-qat for details. + + The following table reports how ring pairs are mapped to VFs + on the PF 0000:6b:0.0 configured for `sym;asym` or `asym;sym`: + + =========== ============ =========== ============ =========== + PCI BDF/VF RP0/service RP1/service RP2/service RP3/service + =========== ============ =========== ============ =========== + 0000:6b:0.1 RP 0 asym RP 1 sym RP 2 asym RP 3 sym + 0000:6b:0.2 RP 4 asym RP 5 sym RP 6 asym RP 7 sym + 0000:6b:0.3 RP 8 asym RP 9 sym RP10 asym RP11 sym + ... ... ... ... ... + =========== ============ =========== ============ =========== + + All VFs follow the same pattern. + + + The following table reports how ring pairs are mapped to VFs on + the PF 0000:6b:0.0 configured for `dc`: + + =========== ============ =========== ============ =========== + PCI BDF/VF RP0/service RP1/service RP2/service RP3/service + =========== ============ =========== ============ =========== + 0000:6b:0.1 RP 0 dc RP 1 dc RP 2 dc RP 3 dc + 0000:6b:0.2 RP 4 dc RP 5 dc RP 6 dc RP 7 dc + 0000:6b:0.3 RP 8 dc RP 9 dc RP10 dc RP11 dc + ... ... ... ... ... + =========== ============ =========== ============ =========== + + The mapping of a RP to a service can be retrieved using + ``rp2srv`` from sysfs. + See Documentation/ABI/testing/sysfs-driver-qat for details. + + This attribute is only available for qat_4xxx devices. diff --git a/Documentation/ABI/testing/debugfs-hisi-hpre b/Documentation/ABI/testing/debugfs-hisi-hpre index 82abf92df429..8e8de49c5cc6 100644 --- a/Documentation/ABI/testing/debugfs-hisi-hpre +++ b/Documentation/ABI/testing/debugfs-hisi-hpre @@ -101,7 +101,7 @@ What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/status Date: Apr 2020 Contact: linux-crypto@vger.kernel.org Description: Dump the status of the QM. - Four states: initiated, started, stopped and closed. + Two states: work, stop. Available for both PF and VF, and take no other effect on HPRE. What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/diff_regs diff --git a/Documentation/ABI/testing/debugfs-hisi-sec b/Documentation/ABI/testing/debugfs-hisi-sec index 93c530d1bf0f..deeefe2c735e 100644 --- a/Documentation/ABI/testing/debugfs-hisi-sec +++ b/Documentation/ABI/testing/debugfs-hisi-sec @@ -81,7 +81,7 @@ What: /sys/kernel/debug/hisi_sec2/<bdf>/qm/status Date: Apr 2020 Contact: linux-crypto@vger.kernel.org Description: Dump the status of the QM. - Four states: initiated, started, stopped and closed. + Two states: work, stop. Available for both PF and VF, and take no other effect on SEC. What: /sys/kernel/debug/hisi_sec2/<bdf>/qm/diff_regs diff --git a/Documentation/ABI/testing/debugfs-hisi-zip b/Documentation/ABI/testing/debugfs-hisi-zip index fd3f314cf8d1..593714afaed2 100644 --- a/Documentation/ABI/testing/debugfs-hisi-zip +++ b/Documentation/ABI/testing/debugfs-hisi-zip @@ -94,7 +94,7 @@ What: /sys/kernel/debug/hisi_zip/<bdf>/qm/status Date: Apr 2020 Contact: linux-crypto@vger.kernel.org Description: Dump the status of the QM. - Four states: initiated, started, stopped and closed. + Two states: work, stop. Available for both PF and VF, and take no other effect on ZIP. What: /sys/kernel/debug/hisi_zip/<bdf>/qm/diff_regs diff --git a/Documentation/ABI/testing/debugfs-vfio b/Documentation/ABI/testing/debugfs-vfio new file mode 100644 index 000000000000..90f7c262f591 --- /dev/null +++ b/Documentation/ABI/testing/debugfs-vfio @@ -0,0 +1,25 @@ +What: /sys/kernel/debug/vfio +Date: December 2023 +KernelVersion: 6.8 +Contact: Longfang Liu <liulongfang@huawei.com> +Description: This debugfs file directory is used for debugging + of vfio devices, it's a common directory for all vfio devices. + Vfio core will create a device subdirectory under this + directory. + +What: /sys/kernel/debug/vfio/<device>/migration +Date: December 2023 +KernelVersion: 6.8 +Contact: Longfang Liu <liulongfang@huawei.com> +Description: This debugfs file directory is used for debugging + of vfio devices that support live migration. + The debugfs of each vfio device that supports live migration + could be created under this directory. + +What: /sys/kernel/debug/vfio/<device>/migration/state +Date: December 2023 +KernelVersion: 6.8 +Contact: Longfang Liu <liulongfang@huawei.com> +Description: Read the live migration status of the vfio device. + The contents of the state file reflects the migration state + relative to those defined in the vfio_device_mig_state enum diff --git a/Documentation/ABI/testing/sysfs-bus-cdx b/Documentation/ABI/testing/sysfs-bus-cdx index 8c067ff99e54..e84277531414 100644 --- a/Documentation/ABI/testing/sysfs-bus-cdx +++ b/Documentation/ABI/testing/sysfs-bus-cdx @@ -98,6 +98,13 @@ Description: # echo 1 > /sys/bus/cdx/devices/.../remove +What: /sys/bus/cdx/devices/.../resource<N> +Date: July 2023 +Contact: puneet.gupta@amd.com +Description: + The resource binary file contains the content of the memory + regions. These files can be m'maped from userspace. + What: /sys/bus/cdx/devices/.../modalias Date: July 2023 Contact: nipun.gupta@amd.com diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tmc b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tmc index 6aa527296c71..96aafa66b4a5 100644 --- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tmc +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tmc @@ -91,3 +91,19 @@ Contact: Mathieu Poirier <mathieu.poirier@linaro.org> Description: (RW) Size of the trace buffer for TMC-ETR when used in SYSFS mode. Writable only for TMC-ETR configurations. The value should be aligned to the kernel pagesize. + +What: /sys/bus/coresight/devices/<memory_map>.tmc/buf_modes_available +Date: August 2023 +KernelVersion: 6.7 +Contact: Anshuman Khandual <anshuman.khandual@arm.com> +Description: (Read) Shows all supported Coresight TMC-ETR buffer modes available + for the users to configure explicitly. This file is avaialble only + for TMC ETR devices. + +What: /sys/bus/coresight/devices/<memory_map>.tmc/buf_mode_preferred +Date: August 2023 +KernelVersion: 6.7 +Contact: Anshuman Khandual <anshuman.khandual@arm.com> +Description: (RW) Current Coresight TMC-ETR buffer mode selected. But user could + only provide a mode which is supported for a given ETR device. This + file is available only for TMC ETR devices. diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm index 4a58e649550d..4dd49b159543 100644 --- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm @@ -11,3 +11,162 @@ Description: Accepts only one of the 2 values - 1 or 2. 1 : Generate 64 bits data 2 : Generate 32 bits data + +What: /sys/bus/coresight/devices/<tpdm-name>/reset_dataset +Date: March 2023 +KernelVersion 6.7 +Contact: Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com> +Description: + (Write) Reset the dataset of the tpdm. + + Accepts only one value - 1. + 1 : Reset the dataset of the tpdm + +What: /sys/bus/coresight/devices/<tpdm-name>/dsb_trig_type +Date: March 2023 +KernelVersion 6.7 +Contact: Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com> +Description: + (RW) Set/Get the trigger type of the DSB for tpdm. + + Accepts only one of the 2 values - 0 or 1. + 0 : Set the DSB trigger type to false + 1 : Set the DSB trigger type to true + +What: /sys/bus/coresight/devices/<tpdm-name>/dsb_trig_ts +Date: March 2023 +KernelVersion 6.7 +Contact: Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com> +Description: + (RW) Set/Get the trigger timestamp of the DSB for tpdm. + + Accepts only one of the 2 values - 0 or 1. + 0 : Set the DSB trigger type to false + 1 : Set the DSB trigger type to true + +What: /sys/bus/coresight/devices/<tpdm-name>/dsb_mode +Date: March 2023 +KernelVersion 6.7 +Contact: Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com> +Description: + (RW) Set/Get the programming mode of the DSB for tpdm. + + Accepts the value needs to be greater than 0. What data + bits do is listed below. + Bit[0:1] : Test mode control bit for choosing the inputs. + Bit[3] : Set to 0 for low performance mode. Set to 1 for high + performance mode. + Bit[4:8] : Select byte lane for high performance mode. + +What: /sys/bus/coresight/devices/<tpdm-name>/dsb_edge/ctrl_idx +Date: March 2023 +KernelVersion 6.7 +Contact: Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com> +Description: + (RW) Set/Get the index number of the edge detection for the DSB + subunit TPDM. Since there are at most 256 edge detections, this + value ranges from 0 to 255. + +What: /sys/bus/coresight/devices/<tpdm-name>/dsb_edge/ctrl_val +Date: March 2023 +KernelVersion 6.7 +Contact: Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com> +Description: + Write a data to control the edge detection corresponding to + the index number. Before writing data to this sysfs file, + "ctrl_idx" should be written first to configure the index + number of the edge detection which needs to be controlled. + + Accepts only one of the following values. + 0 - Rising edge detection + 1 - Falling edge detection + 2 - Rising and falling edge detection (toggle detection) + + +What: /sys/bus/coresight/devices/<tpdm-name>/dsb_edge/ctrl_mask +Date: March 2023 +KernelVersion 6.7 +Contact: Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com> +Description: + Write a data to mask the edge detection corresponding to the index + number. Before writing data to this sysfs file, "ctrl_idx" should + be written first to configure the index number of the edge detection + which needs to be masked. + + Accepts only one of the 2 values - 0 or 1. + +What: /sys/bus/coresight/devices/<tpdm-name>/dsb_edge/edcr[0:15] +Date: March 2023 +KernelVersion 6.7 +Contact: Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com> +Description: + Read a set of the edge control value of the DSB in TPDM. + +What: /sys/bus/coresight/devices/<tpdm-name>/dsb_edge/edcmr[0:7] +Date: March 2023 +KernelVersion 6.7 +Contact: Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com> +Description: + Read a set of the edge control mask of the DSB in TPDM. + +What: /sys/bus/coresight/devices/<tpdm-name>/dsb_trig_patt/xpr[0:7] +Date: March 2023 +KernelVersion 6.7 +Contact: Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com> +Description: + (RW) Set/Get the value of the trigger pattern for the DSB + subunit TPDM. + +What: /sys/bus/coresight/devices/<tpdm-name>/dsb_trig_patt/xpmr[0:7] +Date: March 2023 +KernelVersion 6.7 +Contact: Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com> +Description: + (RW) Set/Get the mask of the trigger pattern for the DSB + subunit TPDM. + +What: /sys/bus/coresight/devices/<tpdm-name>/dsb_patt/tpr[0:7] +Date: March 2023 +KernelVersion 6.7 +Contact: Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com> +Description: + (RW) Set/Get the value of the pattern for the DSB subunit TPDM. + +What: /sys/bus/coresight/devices/<tpdm-name>/dsb_patt/tpmr[0:7] +Date: March 2023 +KernelVersion 6.7 +Contact: Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com> +Description: + (RW) Set/Get the mask of the pattern for the DSB subunit TPDM. + +What: /sys/bus/coresight/devices/<tpdm-name>/dsb_patt/enable_ts +Date: March 2023 +KernelVersion 6.7 +Contact: Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com> +Description: + (Write) Set the pattern timestamp of DSB tpdm. Read + the pattern timestamp of DSB tpdm. + + Accepts only one of the 2 values - 0 or 1. + 0 : Disable DSB pattern timestamp. + 1 : Enable DSB pattern timestamp. + +What: /sys/bus/coresight/devices/<tpdm-name>/dsb_patt/set_type +Date: March 2023 +KernelVersion 6.7 +Contact: Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com> +Description: + (Write) Set the pattern type of DSB tpdm. Read + the pattern type of DSB tpdm. + + Accepts only one of the 2 values - 0 or 1. + 0 : Set the DSB pattern type to value. + 1 : Set the DSB pattern type to toggle. + +What: /sys/bus/coresight/devices/<tpdm-name>/dsb_msr/msr[0:31] +Date: March 2023 +KernelVersion 6.7 +Contact: Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com> +Description: + (RW) Set/Get the MSR(mux select register) for the DSB subunit + TPDM. diff --git a/Documentation/ABI/testing/sysfs-bus-cxl b/Documentation/ABI/testing/sysfs-bus-cxl index e76c3600607f..fff2581b8033 100644 --- a/Documentation/ABI/testing/sysfs-bus-cxl +++ b/Documentation/ABI/testing/sysfs-bus-cxl @@ -28,6 +28,23 @@ Description: Payload in the CXL-2.0 specification. +What: /sys/bus/cxl/devices/memX/ram/qos_class +Date: May, 2023 +KernelVersion: v6.8 +Contact: linux-cxl@vger.kernel.org +Description: + (RO) For CXL host platforms that support "QoS Telemmetry" + this attribute conveys a comma delimited list of platform + specific cookies that identifies a QoS performance class + for the volatile partition of the CXL mem device. These + class-ids can be compared against a similar "qos_class" + published for a root decoder. While it is not required + that the endpoints map their local memory-class to a + matching platform class, mismatches are not recommended + and there are platform specific performance related + side-effects that may result. First class-id is displayed. + + What: /sys/bus/cxl/devices/memX/pmem/size Date: December, 2020 KernelVersion: v5.12 @@ -38,6 +55,23 @@ Description: Payload in the CXL-2.0 specification. +What: /sys/bus/cxl/devices/memX/pmem/qos_class +Date: May, 2023 +KernelVersion: v6.8 +Contact: linux-cxl@vger.kernel.org +Description: + (RO) For CXL host platforms that support "QoS Telemmetry" + this attribute conveys a comma delimited list of platform + specific cookies that identifies a QoS performance class + for the persistent partition of the CXL mem device. These + class-ids can be compared against a similar "qos_class" + published for a root decoder. While it is not required + that the endpoints map their local memory-class to a + matching platform class, mismatches are not recommended + and there are platform specific performance related + side-effects that may result. First class-id is displayed. + + What: /sys/bus/cxl/devices/memX/serial Date: January, 2022 KernelVersion: v5.18 diff --git a/Documentation/ABI/testing/sysfs-bus-event_source-devices-caps b/Documentation/ABI/testing/sysfs-bus-event_source-devices-caps index 8757dcf41c08..a5f506f7d481 100644 --- a/Documentation/ABI/testing/sysfs-bus-event_source-devices-caps +++ b/Documentation/ABI/testing/sysfs-bus-event_source-devices-caps @@ -16,3 +16,9 @@ Description: Example output in powerpc: grep . /sys/bus/event_source/devices/cpu/caps/* /sys/bus/event_source/devices/cpu/caps/pmu_name:POWER9 + + The "branch_counter_nr" in the supported platform exposes the + maximum number of counters which can be shown in the u64 counters + of PERF_SAMPLE_BRANCH_COUNTERS, while the "branch_counter_width" + exposes the width of each counter. Both of them can be used by + the perf tool to parse the logged counters in each branch. diff --git a/Documentation/ABI/testing/sysfs-bus-i3c b/Documentation/ABI/testing/sysfs-bus-i3c index e5248fd67a56..c812ab180ff4 100644 --- a/Documentation/ABI/testing/sysfs-bus-i3c +++ b/Documentation/ABI/testing/sysfs-bus-i3c @@ -88,6 +88,21 @@ Description: This entry describes the HDRCAP of the master controller driving the bus. +What: /sys/bus/i3c/devices/i3c-<bus-id>/hotjoin +KernelVersion: 6.8 +Contact: linux-i3c@vger.kernel.org +Description: + I3C’s Hot-Join mechanism allows an I3C Device to inform the + Active Controller that a newly-joined Target is present on the + I3C Bus and is ready to receive a Dynamic Address, in order to + become fully functional on the Bus. Hot-Join is used when the + Target is mounted on the same I3C bus and remains depowered + until needed or until the Target is physically inserted into the + I3C bus + + This entry allows to enable or disable Hot-join of the Current + Controller driving the bus. + What: /sys/bus/i3c/devices/i3c-<bus-id>/<bus-id>-<device-pid> KernelVersion: 5.0 Contact: linux-i3c@vger.kernel.org diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index 19cde14f3869..2e6d5ebfd3c7 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -362,10 +362,21 @@ Description: What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_peak_raw What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_peak_raw What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_peak_raw +What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_peak_raw +What: /sys/bus/iio/devices/iio:deviceX/in_temp_peak_raw KernelVersion: 2.6.36 Contact: linux-iio@vger.kernel.org Description: - Highest value since some reset condition. These + Highest value since some reset condition. These + attributes allow access to this and are otherwise + the direct equivalent of the <type>Y[_name]_raw attributes. + +What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_trough_raw +What: /sys/bus/iio/devices/iio:deviceX/in_temp_trough_raw +KernelVersion: 6.7 +Contact: linux-iio@vger.kernel.org +Description: + Lowest value since some reset condition. These attributes allow access to this and are otherwise the direct equivalent of the <type>Y[_name]_raw attributes. @@ -618,7 +629,9 @@ KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: If a discrete set of scale values is available, they - are listed in this attribute. + are listed in this attribute. Unlike illumination, + multiplying intensity by intensity_scale does not + yield value with any standardized unit. What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_hardwaregain What: /sys/bus/iio/devices/iio:deviceX/in_intensity_hardwaregain @@ -1574,6 +1587,8 @@ What: /sys/.../iio:deviceX/in_intensityY_raw What: /sys/.../iio:deviceX/in_intensityY_ir_raw What: /sys/.../iio:deviceX/in_intensityY_both_raw What: /sys/.../iio:deviceX/in_intensityY_uv_raw +What: /sys/.../iio:deviceX/in_intensityY_uva_raw +What: /sys/.../iio:deviceX/in_intensityY_uvb_raw What: /sys/.../iio:deviceX/in_intensityY_duv_raw KernelVersion: 3.4 Contact: linux-iio@vger.kernel.org @@ -1582,8 +1597,9 @@ Description: that measurements contain visible and infrared light components or just infrared light, respectively. Modifier uv indicates that measurements contain ultraviolet light - components. Modifier duv indicates that measurements - contain deep ultraviolet light components. + components. Modifiers uva, uvb and duv indicate that + measurements contain A, B or deep (C) ultraviolet light + components respectively. What: /sys/.../iio:deviceX/in_uvindex_input KernelVersion: 4.6 @@ -2254,3 +2270,21 @@ Description: If a label is defined for this event add that to the event specific attributes. This is useful for userspace to be able to better identify an individual event. + +What: /sys/.../events/in_accel_gesture_tap_wait_timeout +KernelVersion: 6.7 +Contact: linux-iio@vger.kernel.org +Description: + Enable tap gesture confirmation with timeout. + +What: /sys/.../events/in_accel_gesture_tap_wait_dur +KernelVersion: 6.7 +Contact: linux-iio@vger.kernel.org +Description: + Timeout value in seconds for tap gesture confirmation. + +What: /sys/.../events/in_accel_gesture_tap_wait_dur_available +KernelVersion: 6.7 +Contact: linux-iio@vger.kernel.org +Description: + List of available timeout value for tap gesture confirmation. diff --git a/Documentation/ABI/testing/sysfs-bus-spi-devices-spi-nor b/Documentation/ABI/testing/sysfs-bus-spi-devices-spi-nor index c800621eff95..9ed5582ddea2 100644 --- a/Documentation/ABI/testing/sysfs-bus-spi-devices-spi-nor +++ b/Documentation/ABI/testing/sysfs-bus-spi-devices-spi-nor @@ -25,6 +25,9 @@ KernelVersion: 5.14 Contact: linux-mtd@lists.infradead.org Description: (RO) Part name of the SPI NOR flash. + The attribute is optional. User space should not rely on + it to be present or even correct. Instead, user space + should read the jedec_id attribute. What: /sys/bus/spi/devices/.../spi-nor/sfdp Date: April 2021 diff --git a/Documentation/ABI/testing/sysfs-class-devfreq b/Documentation/ABI/testing/sysfs-class-devfreq index 5e6b74f30406..1e7e0bb4c14e 100644 --- a/Documentation/ABI/testing/sysfs-class-devfreq +++ b/Documentation/ABI/testing/sysfs-class-devfreq @@ -52,6 +52,9 @@ Description: echo 0 > /sys/class/devfreq/.../trans_stat + If the transition table is bigger than PAGE_SIZE, reading + this will return an -EFBIG error. + What: /sys/class/devfreq/.../available_frequencies Date: October 2012 Contact: Nishanth Menon <nm@ti.com> diff --git a/Documentation/ABI/testing/sysfs-class-hwmon b/Documentation/ABI/testing/sysfs-class-hwmon index 638f4c6d4ec7..3dac923c9b0e 100644 --- a/Documentation/ABI/testing/sysfs-class-hwmon +++ b/Documentation/ABI/testing/sysfs-class-hwmon @@ -381,6 +381,15 @@ Description: RW +What: /sys/class/hwmon/hwmonX/tempY_max_alarm +Description: + Maximum temperature alarm flag. + + - 0: OK + - 1: temperature has reached tempY_max + + RO + What: /sys/class/hwmon/hwmonX/tempY_min Description: Temperature min value. @@ -389,6 +398,15 @@ Description: RW +What: /sys/class/hwmon/hwmonX/tempY_min_alarm +Description: + Minimum temperature alarm flag. + + - 0: OK + - 1: temperature has reached tempY_min + + RO + What: /sys/class/hwmon/hwmonX/tempY_max_hyst Description: Temperature hysteresis value for max limit. @@ -434,12 +452,7 @@ Description: - 0: OK - 1: temperature has reached tempY_crit - RW - - Contrary to regular alarm flags which clear themselves - automatically when read, this one sticks until cleared by - the user. This is done by writing 0 to the file. Writing - other values is unsupported. + RO What: /sys/class/hwmon/hwmonX/tempY_crit_hyst Description: @@ -462,6 +475,15 @@ Description: RW +What: /sys/class/hwmon/hwmonX/tempY_emergency_alarm +Description: + Emergency high temperature alarm flag. + + - 0: OK + - 1: temperature has reached tempY_emergency + + RO + What: /sys/class/hwmon/hwmonX/tempY_emergency_hyst Description: Temperature hysteresis value for emergency limit. @@ -887,15 +909,15 @@ Description: RW -What: /sys/class/hwmon/hwmonX/humidityY_input +What: /sys/class/hwmon/hwmonX/humidityY_alarm Description: - Humidity + Humidity limit detection - Unit: milli-percent (per cent mille, pcm) + - 0: OK + - 1: Humidity limit has been reached RO - What: /sys/class/hwmon/hwmonX/humidityY_enable Description: Enable or disable the sensors @@ -908,6 +930,74 @@ Description: RW +What: /sys/class/hwmon/hwmonX/humidityY_fault +Description: + Reports a humidity sensor failure. + + - 1: Failed + - 0: Ok + + RO + +What: /sys/class/hwmon/hwmonX/humidityY_input +Description: + Humidity + + Unit: milli-percent (per cent mille, pcm) + + RO + +What: /sys/class/hwmon/hwmonX/humidityY_label +Description: + Suggested humidity channel label. + + Text string + + Should only be created if the driver has hints about what + this humidity channel is being used for, and user-space + doesn't. In all other cases, the label is provided by + user-space. + + RO + +What: /sys/class/hwmon/hwmonX/humidityY_max +Description: + Humidity max value. + + Unit: milli-percent (per cent mille, pcm) + + RW + +What: /sys/class/hwmon/hwmonX/humidityY_max_hyst +Description: + Humidity hysteresis value for max limit. + + Unit: milli-percent (per cent mille, pcm) + + Must be reported as an absolute humidity, NOT a delta + from the max value. + + RW + +What: /sys/class/hwmon/hwmonX/humidityY_min +Description: + Humidity min value. + + Unit: milli-percent (per cent mille, pcm) + + RW + +What: /sys/class/hwmon/hwmonX/humidityY_min_hyst +Description: + Humidity hysteresis value for min limit. + + Unit: milli-percent (per cent mille, pcm) + + Must be reported as an absolute humidity, NOT a delta + from the min value. + + RW + What: /sys/class/hwmon/hwmonX/humidityY_rated_min Description: Minimum rated humidity. diff --git a/Documentation/ABI/testing/sysfs-class-led-trigger-netdev b/Documentation/ABI/testing/sysfs-class-led-trigger-netdev index f6d9d72ce77b..a6c307c4befa 100644 --- a/Documentation/ABI/testing/sysfs-class-led-trigger-netdev +++ b/Documentation/ABI/testing/sysfs-class-led-trigger-netdev @@ -114,6 +114,45 @@ Description: speed of 1000Mbps of the named network device. Setting this value also immediately changes the LED state. +What: /sys/class/leds/<led>/link_2500 +Date: Nov 2023 +KernelVersion: 6.8 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link speed state of 2500Mbps of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link state + speed of 2500Mbps of the named network device. + Setting this value also immediately changes the LED state. + +What: /sys/class/leds/<led>/link_5000 +Date: Nov 2023 +KernelVersion: 6.8 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link speed state of 5000Mbps of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link state + speed of 5000Mbps of the named network device. + Setting this value also immediately changes the LED state. + +What: /sys/class/leds/<led>/link_10000 +Date: Nov 2023 +KernelVersion: 6.8 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link speed state of 10000Mbps of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link state + speed of 10000Mbps of the named network device. + Setting this value also immediately changes the LED state. + What: /sys/class/leds/<led>/half_duplex Date: Jun 2023 KernelVersion: 6.5 diff --git a/Documentation/ABI/testing/sysfs-class-led-trigger-tty b/Documentation/ABI/testing/sysfs-class-led-trigger-tty index 2bf6b24e781b..30cef9ac0f49 100644 --- a/Documentation/ABI/testing/sysfs-class-led-trigger-tty +++ b/Documentation/ABI/testing/sysfs-class-led-trigger-tty @@ -4,3 +4,59 @@ KernelVersion: 5.10 Contact: linux-leds@vger.kernel.org Description: Specifies the tty device name of the triggering tty + +What: /sys/class/leds/<led>/rx +Date: February 2024 +KernelVersion: 6.8 +Description: + Signal reception (rx) of data on the named tty device. + If set to 0, the LED will not blink on reception. + If set to 1 (default), the LED will blink on reception. + +What: /sys/class/leds/<led>/tx +Date: February 2024 +KernelVersion: 6.8 +Description: + Signal transmission (tx) of data on the named tty device. + If set to 0, the LED will not blink on transmission. + If set to 1 (default), the LED will blink on transmission. + +What: /sys/class/leds/<led>/cts +Date: February 2024 +KernelVersion: 6.8 +Description: + CTS = Clear To Send + DCE is ready to accept data from the DTE. + If the line state is detected, the LED is switched on. + If set to 0 (default), the LED will not evaluate CTS. + If set to 1, the LED will evaluate CTS. + +What: /sys/class/leds/<led>/dsr +Date: February 2024 +KernelVersion: 6.8 +Description: + DSR = Data Set Ready + DCE is ready to receive and send data. + If the line state is detected, the LED is switched on. + If set to 0 (default), the LED will not evaluate DSR. + If set to 1, the LED will evaluate DSR. + +What: /sys/class/leds/<led>/dcd +Date: February 2024 +KernelVersion: 6.8 +Description: + DCD = Data Carrier Detect + DTE is receiving a carrier from the DCE. + If the line state is detected, the LED is switched on. + If set to 0 (default), the LED will not evaluate CAR (DCD). + If set to 1, the LED will evaluate CAR (DCD). + +What: /sys/class/leds/<led>/rng +Date: February 2024 +KernelVersion: 6.8 +Description: + RNG = Ring Indicator + DCE has detected an incoming ring signal on the telephone + line. If the line state is detected, the LED is switched on. + If set to 0 (default), the LED will not evaluate RNG. + If set to 1, the LED will evaluate RNG. diff --git a/Documentation/ABI/testing/sysfs-class-net-queues b/Documentation/ABI/testing/sysfs-class-net-queues index 906ff3ca928a..5bff64d256c2 100644 --- a/Documentation/ABI/testing/sysfs-class-net-queues +++ b/Documentation/ABI/testing/sysfs-class-net-queues @@ -1,4 +1,4 @@ -What: /sys/class/<iface>/queues/rx-<queue>/rps_cpus +What: /sys/class/net/<iface>/queues/rx-<queue>/rps_cpus Date: March 2010 KernelVersion: 2.6.35 Contact: netdev@vger.kernel.org @@ -8,7 +8,7 @@ Description: network device queue. Possible values depend on the number of available CPU(s) in the system. -What: /sys/class/<iface>/queues/rx-<queue>/rps_flow_cnt +What: /sys/class/net/<iface>/queues/rx-<queue>/rps_flow_cnt Date: April 2010 KernelVersion: 2.6.35 Contact: netdev@vger.kernel.org @@ -16,7 +16,7 @@ Description: Number of Receive Packet Steering flows being currently processed by this particular network device receive queue. -What: /sys/class/<iface>/queues/tx-<queue>/tx_timeout +What: /sys/class/net/<iface>/queues/tx-<queue>/tx_timeout Date: November 2011 KernelVersion: 3.3 Contact: netdev@vger.kernel.org @@ -24,7 +24,7 @@ Description: Indicates the number of transmit timeout events seen by this network interface transmit queue. -What: /sys/class/<iface>/queues/tx-<queue>/tx_maxrate +What: /sys/class/net/<iface>/queues/tx-<queue>/tx_maxrate Date: March 2015 KernelVersion: 4.1 Contact: netdev@vger.kernel.org @@ -32,7 +32,7 @@ Description: A Mbps max-rate set for the queue, a value of zero means disabled, default is disabled. -What: /sys/class/<iface>/queues/tx-<queue>/xps_cpus +What: /sys/class/net/<iface>/queues/tx-<queue>/xps_cpus Date: November 2010 KernelVersion: 2.6.38 Contact: netdev@vger.kernel.org @@ -42,7 +42,7 @@ Description: network device transmit queue. Possible values depend on the number of available CPU(s) in the system. -What: /sys/class/<iface>/queues/tx-<queue>/xps_rxqs +What: /sys/class/net/<iface>/queues/tx-<queue>/xps_rxqs Date: June 2018 KernelVersion: 4.18.0 Contact: netdev@vger.kernel.org @@ -53,7 +53,7 @@ Description: number of available receive queue(s) in the network device. Default is disabled. -What: /sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/hold_time +What: /sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/hold_time Date: November 2011 KernelVersion: 3.3 Contact: netdev@vger.kernel.org @@ -62,7 +62,7 @@ Description: of this particular network device transmit queue. Default value is 1000. -What: /sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/inflight +What: /sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/inflight Date: November 2011 KernelVersion: 3.3 Contact: netdev@vger.kernel.org @@ -70,7 +70,7 @@ Description: Indicates the number of bytes (objects) in flight on this network device transmit queue. -What: /sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit +What: /sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit Date: November 2011 KernelVersion: 3.3 Contact: netdev@vger.kernel.org @@ -79,7 +79,7 @@ Description: on this network device transmit queue. This value is clamped to be within the bounds defined by limit_max and limit_min. -What: /sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit_max +What: /sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit_max Date: November 2011 KernelVersion: 3.3 Contact: netdev@vger.kernel.org @@ -88,7 +88,7 @@ Description: queued on this network device transmit queue. See include/linux/dynamic_queue_limits.h for the default value. -What: /sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit_min +What: /sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit_min Date: November 2011 KernelVersion: 3.3 Contact: netdev@vger.kernel.org diff --git a/Documentation/ABI/testing/sysfs-class-net-statistics b/Documentation/ABI/testing/sysfs-class-net-statistics index 55db27815361..53e508c6936a 100644 --- a/Documentation/ABI/testing/sysfs-class-net-statistics +++ b/Documentation/ABI/testing/sysfs-class-net-statistics @@ -1,4 +1,4 @@ -What: /sys/class/<iface>/statistics/collisions +What: /sys/class/net/<iface>/statistics/collisions Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -6,7 +6,7 @@ Description: Indicates the number of collisions seen by this network device. This value might not be relevant with all MAC layers. -What: /sys/class/<iface>/statistics/multicast +What: /sys/class/net/<iface>/statistics/multicast Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -14,7 +14,7 @@ Description: Indicates the number of multicast packets received by this network device. -What: /sys/class/<iface>/statistics/rx_bytes +What: /sys/class/net/<iface>/statistics/rx_bytes Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -23,7 +23,7 @@ Description: See the network driver for the exact meaning of when this value is incremented. -What: /sys/class/<iface>/statistics/rx_compressed +What: /sys/class/net/<iface>/statistics/rx_compressed Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -32,7 +32,7 @@ Description: network device. This value might only be relevant for interfaces that support packet compression (e.g: PPP). -What: /sys/class/<iface>/statistics/rx_crc_errors +What: /sys/class/net/<iface>/statistics/rx_crc_errors Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -41,7 +41,7 @@ Description: by this network device. Note that the specific meaning might depend on the MAC layer used by the interface. -What: /sys/class/<iface>/statistics/rx_dropped +What: /sys/class/net/<iface>/statistics/rx_dropped Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -51,7 +51,7 @@ Description: packet processing. See the network driver for the exact meaning of this value. -What: /sys/class/<iface>/statistics/rx_errors +What: /sys/class/net/<iface>/statistics/rx_errors Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -59,7 +59,7 @@ Description: Indicates the number of receive errors on this network device. See the network driver for the exact meaning of this value. -What: /sys/class/<iface>/statistics/rx_fifo_errors +What: /sys/class/net/<iface>/statistics/rx_fifo_errors Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -68,7 +68,7 @@ Description: network device. See the network driver for the exact meaning of this value. -What: /sys/class/<iface>/statistics/rx_frame_errors +What: /sys/class/net/<iface>/statistics/rx_frame_errors Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -78,7 +78,7 @@ Description: on the MAC layer protocol used. See the network driver for the exact meaning of this value. -What: /sys/class/<iface>/statistics/rx_length_errors +What: /sys/class/net/<iface>/statistics/rx_length_errors Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -87,7 +87,7 @@ Description: error, oversized or undersized. See the network driver for the exact meaning of this value. -What: /sys/class/<iface>/statistics/rx_missed_errors +What: /sys/class/net/<iface>/statistics/rx_missed_errors Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -96,7 +96,7 @@ Description: due to lack of capacity in the receive side. See the network driver for the exact meaning of this value. -What: /sys/class/<iface>/statistics/rx_nohandler +What: /sys/class/net/<iface>/statistics/rx_nohandler Date: February 2016 KernelVersion: 4.6 Contact: netdev@vger.kernel.org @@ -104,7 +104,7 @@ Description: Indicates the number of received packets that were dropped on an inactive device by the network core. -What: /sys/class/<iface>/statistics/rx_over_errors +What: /sys/class/net/<iface>/statistics/rx_over_errors Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -114,7 +114,7 @@ Description: (e.g: larger than MTU). See the network driver for the exact meaning of this value. -What: /sys/class/<iface>/statistics/rx_packets +What: /sys/class/net/<iface>/statistics/rx_packets Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -122,7 +122,7 @@ Description: Indicates the total number of good packets received by this network device. -What: /sys/class/<iface>/statistics/tx_aborted_errors +What: /sys/class/net/<iface>/statistics/tx_aborted_errors Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -132,7 +132,7 @@ Description: a medium collision). See the network driver for the exact meaning of this value. -What: /sys/class/<iface>/statistics/tx_bytes +What: /sys/class/net/<iface>/statistics/tx_bytes Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -143,7 +143,7 @@ Description: transmitted packets or all packets that have been queued for transmission. -What: /sys/class/<iface>/statistics/tx_carrier_errors +What: /sys/class/net/<iface>/statistics/tx_carrier_errors Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -152,7 +152,7 @@ Description: because of carrier errors (e.g: physical link down). See the network driver for the exact meaning of this value. -What: /sys/class/<iface>/statistics/tx_compressed +What: /sys/class/net/<iface>/statistics/tx_compressed Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -161,7 +161,7 @@ Description: this might only be relevant for devices that support compression (e.g: PPP). -What: /sys/class/<iface>/statistics/tx_dropped +What: /sys/class/net/<iface>/statistics/tx_dropped Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -170,7 +170,7 @@ Description: See the driver for the exact reasons as to why the packets were dropped. -What: /sys/class/<iface>/statistics/tx_errors +What: /sys/class/net/<iface>/statistics/tx_errors Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -179,7 +179,7 @@ Description: a network device. See the driver for the exact reasons as to why the packets were dropped. -What: /sys/class/<iface>/statistics/tx_fifo_errors +What: /sys/class/net/<iface>/statistics/tx_fifo_errors Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -188,7 +188,7 @@ Description: FIFO error. See the driver for the exact reasons as to why the packets were dropped. -What: /sys/class/<iface>/statistics/tx_heartbeat_errors +What: /sys/class/net/<iface>/statistics/tx_heartbeat_errors Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -197,7 +197,7 @@ Description: reported as heartbeat errors. See the driver for the exact reasons as to why the packets were dropped. -What: /sys/class/<iface>/statistics/tx_packets +What: /sys/class/net/<iface>/statistics/tx_packets Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -206,7 +206,7 @@ Description: device. See the driver for whether this reports the number of all attempted or successful transmissions. -What: /sys/class/<iface>/statistics/tx_window_errors +What: /sys/class/net/<iface>/statistics/tx_window_errors Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org diff --git a/Documentation/ABI/testing/sysfs-devices-platform-kunpeng_hccs b/Documentation/ABI/testing/sysfs-devices-platform-kunpeng_hccs index fdb4e36310fb..1666340820f7 100644 --- a/Documentation/ABI/testing/sysfs-devices-platform-kunpeng_hccs +++ b/Documentation/ABI/testing/sysfs-devices-platform-kunpeng_hccs @@ -3,7 +3,7 @@ What: /sys/devices/platform/HISI04Bx:00/chipX/linked_full_lane What: /sys/devices/platform/HISI04Bx:00/chipX/crc_err_cnt Date: November 2023 KernelVersion: 6.6 -Contact: Huisong Li <lihuisong@huawei.org> +Contact: Huisong Li <lihuisong@huawei.com> Description: The /sys/devices/platform/HISI04Bx:00/chipX/ directory contains read-only attributes exposing some summarization @@ -26,7 +26,7 @@ What: /sys/devices/platform/HISI04Bx:00/chipX/dieY/linked_full_lane What: /sys/devices/platform/HISI04Bx:00/chipX/dieY/crc_err_cnt Date: November 2023 KernelVersion: 6.6 -Contact: Huisong Li <lihuisong@huawei.org> +Contact: Huisong Li <lihuisong@huawei.com> Description: The /sys/devices/platform/HISI04Bx:00/chipX/dieY/ directory contains read-only attributes exposing some summarization @@ -54,7 +54,7 @@ What: /sys/devices/platform/HISI04Bx:00/chipX/dieY/hccsN/lane_mask What: /sys/devices/platform/HISI04Bx:00/chipX/dieY/hccsN/crc_err_cnt Date: November 2023 KernelVersion: 6.6 -Contact: Huisong Li <lihuisong@huawei.org> +Contact: Huisong Li <lihuisong@huawei.com> Description: The /sys/devices/platform/HISI04Bx/chipX/dieX/hccsN/ directory contains read-only attributes exposing information about diff --git a/Documentation/ABI/testing/sysfs-driver-habanalabs b/Documentation/ABI/testing/sysfs-driver-habanalabs index c63ca1ad500d..4244f5af4b54 100644 --- a/Documentation/ABI/testing/sysfs-driver-habanalabs +++ b/Documentation/ABI/testing/sysfs-driver-habanalabs @@ -149,6 +149,18 @@ Contact: ogabbay@kernel.org Description: Displays the current clock frequency, in Hz, of the MME compute engine. This property is valid only for the Goya ASIC family +What: /sys/class/accel/accel<n>/device/module_id +Date: Nov 2023 +KernelVersion: not yet upstreamed +Contact: ogabbay@kernel.org +Description: Displays the device's module id + +What: /sys/class/accel/accel<n>/device/parent_device +Date: Nov 2023 +KernelVersion: 6.8 +Contact: ttayar@habana.ai +Description: Displays the name of the parent device of the accel device + What: /sys/class/accel/accel<n>/device/pci_addr Date: Jan 2019 KernelVersion: 5.1 diff --git a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon index 8d7d8f05f6cd..92fe7c5c5ac1 100644 --- a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon +++ b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon @@ -1,4 +1,4 @@ -What: /sys/devices/.../hwmon/hwmon<i>/in0_input +What: /sys/bus/pci/drivers/i915/.../hwmon/hwmon<i>/in0_input Date: February 2023 KernelVersion: 6.2 Contact: intel-gfx@lists.freedesktop.org @@ -6,7 +6,7 @@ Description: RO. Current Voltage in millivolt. Only supported for particular Intel i915 graphics platforms. -What: /sys/devices/.../hwmon/hwmon<i>/power1_max +What: /sys/bus/pci/drivers/i915/.../hwmon/hwmon<i>/power1_max Date: February 2023 KernelVersion: 6.2 Contact: intel-gfx@lists.freedesktop.org @@ -20,7 +20,7 @@ Description: RW. Card reactive sustained (PL1/Tau) power limit in microwatts. Only supported for particular Intel i915 graphics platforms. -What: /sys/devices/.../hwmon/hwmon<i>/power1_rated_max +What: /sys/bus/pci/drivers/i915/.../hwmon/hwmon<i>/power1_rated_max Date: February 2023 KernelVersion: 6.2 Contact: intel-gfx@lists.freedesktop.org @@ -28,7 +28,7 @@ Description: RO. Card default power limit (default TDP setting). Only supported for particular Intel i915 graphics platforms. -What: /sys/devices/.../hwmon/hwmon<i>/power1_max_interval +What: /sys/bus/pci/drivers/i915/.../hwmon/hwmon<i>/power1_max_interval Date: February 2023 KernelVersion: 6.2 Contact: intel-gfx@lists.freedesktop.org @@ -37,7 +37,7 @@ Description: RW. Sustained power limit interval (Tau in PL1/Tau) in Only supported for particular Intel i915 graphics platforms. -What: /sys/devices/.../hwmon/hwmon<i>/power1_crit +What: /sys/bus/pci/drivers/i915/.../hwmon/hwmon<i>/power1_crit Date: February 2023 KernelVersion: 6.2 Contact: intel-gfx@lists.freedesktop.org @@ -50,7 +50,7 @@ Description: RW. Card reactive critical (I1) power limit in microwatts. Only supported for particular Intel i915 graphics platforms. -What: /sys/devices/.../hwmon/hwmon<i>/curr1_crit +What: /sys/bus/pci/drivers/i915/.../hwmon/hwmon<i>/curr1_crit Date: February 2023 KernelVersion: 6.2 Contact: intel-gfx@lists.freedesktop.org @@ -63,7 +63,7 @@ Description: RW. Card reactive critical (I1) power limit in milliamperes. Only supported for particular Intel i915 graphics platforms. -What: /sys/devices/.../hwmon/hwmon<i>/energy1_input +What: /sys/bus/pci/drivers/i915/.../hwmon/hwmon<i>/energy1_input Date: February 2023 KernelVersion: 6.2 Contact: intel-gfx@lists.freedesktop.org diff --git a/Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon b/Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon new file mode 100644 index 000000000000..023fd82de3f7 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon @@ -0,0 +1,70 @@ +What: /sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/power1_max +Date: September 2023 +KernelVersion: 6.5 +Contact: intel-xe@lists.freedesktop.org +Description: RW. Card reactive sustained (PL1) power limit in microwatts. + + The power controller will throttle the operating frequency + if the power averaged over a window (typically seconds) + exceeds this limit. A read value of 0 means that the PL1 + power limit is disabled, writing 0 disables the + limit. Writing values > 0 and <= TDP will enable the power limit. + + Only supported for particular Intel xe graphics platforms. + +What: /sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/power1_rated_max +Date: September 2023 +KernelVersion: 6.5 +Contact: intel-xe@lists.freedesktop.org +Description: RO. Card default power limit (default TDP setting). + + Only supported for particular Intel xe graphics platforms. + +What: /sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/power1_crit +Date: September 2023 +KernelVersion: 6.5 +Contact: intel-xe@lists.freedesktop.org +Description: RW. Card reactive critical (I1) power limit in microwatts. + + Card reactive critical (I1) power limit in microwatts is exposed + for client products. The power controller will throttle the + operating frequency if the power averaged over a window exceeds + this limit. + + Only supported for particular Intel xe graphics platforms. + +What: /sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/curr1_crit +Date: September 2023 +KernelVersion: 6.5 +Contact: intel-xe@lists.freedesktop.org +Description: RW. Card reactive critical (I1) power limit in milliamperes. + + Card reactive critical (I1) power limit in milliamperes is + exposed for server products. The power controller will throttle + the operating frequency if the power averaged over a window + exceeds this limit. + +What: /sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/in0_input +Date: September 2023 +KernelVersion: 6.5 +Contact: intel-xe@lists.freedesktop.org +Description: RO. Current Voltage in millivolt. + + Only supported for particular Intel xe graphics platforms. + +What: /sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/energy1_input +Date: September 2023 +KernelVersion: 6.5 +Contact: intel-xe@lists.freedesktop.org +Description: RO. Energy input of device in microjoules. + + Only supported for particular Intel xe graphics platforms. + +What: /sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/power1_max_interval +Date: October 2023 +KernelVersion: 6.6 +Contact: intel-xe@lists.freedesktop.org +Description: RW. Sustained power limit interval (Tau in PL1/Tau) in + milliseconds over which sustained power is averaged. + + Only supported for particular Intel xe graphics platforms. diff --git a/Documentation/ABI/testing/sysfs-driver-ufs b/Documentation/ABI/testing/sysfs-driver-ufs index 0c7efaf62de0..5bf7073b4f75 100644 --- a/Documentation/ABI/testing/sysfs-driver-ufs +++ b/Documentation/ABI/testing/sysfs-driver-ufs @@ -1223,6 +1223,55 @@ Description: This file shows the total latency (in micro seconds) of write The file is read only. +What: /sys/bus/platform/drivers/ufshcd/*/power_info/lane +What: /sys/bus/platform/devices/*.ufs/power_info/lane +Date: September 2023 +Contact: Can Guo <quic_cang@quicinc.com> +Description: This file shows how many lanes are enabled on the UFS link, + i.e., an output 2 means UFS link is operating with 2 lanes. + + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/power_info/mode +What: /sys/bus/platform/devices/*.ufs/power_info/mode +Date: September 2023 +Contact: Can Guo <quic_cang@quicinc.com> +Description: This file shows the PA power mode of UFS. + + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/power_info/rate +What: /sys/bus/platform/devices/*.ufs/power_info/rate +Date: September 2023 +Contact: Can Guo <quic_cang@quicinc.com> +Description: This file shows the speed rate of UFS link. + + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/power_info/gear +What: /sys/bus/platform/devices/*.ufs/power_info/gear +Date: September 2023 +Contact: Can Guo <quic_cang@quicinc.com> +Description: This file shows the gear of UFS link. + + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/power_info/dev_pm +What: /sys/bus/platform/devices/*.ufs/power_info/dev_pm +Date: September 2023 +Contact: Can Guo <quic_cang@quicinc.com> +Description: This file shows the UFS device power mode. + + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/power_info/link_state +What: /sys/bus/platform/devices/*.ufs/power_info/link_state +Date: September 2023 +Contact: Can Guo <quic_cang@quicinc.com> +Description: This file shows the state of UFS link. + + The file is read only. + What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/wb_presv_us_en What: /sys/bus/platform/devices/*.ufs/device_descriptor/wb_presv_us_en Date: June 2020 @@ -1474,3 +1523,10 @@ Description: Indicates status of Write Booster. The file is read only. +What: /sys/bus/platform/drivers/ufshcd/*/rtc_update_ms +What: /sys/bus/platform/devices/*.ufs/rtc_update_ms +Date: November 2023 +Contact: Bean Huo <beanhuo@micron.com> +Description: + rtc_update_ms indicates how often the host should synchronize or update the + UFS RTC. If set to 0, this will disable UFS RTC periodic update. diff --git a/Documentation/ABI/testing/sysfs-firmware-initrd b/Documentation/ABI/testing/sysfs-firmware-initrd new file mode 100644 index 000000000000..20bf7cf77a19 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-firmware-initrd @@ -0,0 +1,8 @@ +What: /sys/firmware/initrd +Date: December 2023 +Contact: Alexander Graf <graf@amazon.com> +Description: + When the kernel was booted with an initrd and the + "retain_initrd" option is set on the kernel command + line, /sys/firmware/initrd contains the contents of the + initrd that the kernel was booted with. diff --git a/Documentation/ABI/testing/sysfs-fs-f2fs b/Documentation/ABI/testing/sysfs-fs-f2fs index 36c3cb547901..99fa87a43926 100644 --- a/Documentation/ABI/testing/sysfs-fs-f2fs +++ b/Documentation/ABI/testing/sysfs-fs-f2fs @@ -498,6 +498,21 @@ Description: Show status of f2fs checkpoint in real time. CP_RESIZEFS_FLAG 0x00004000 =============================== ============================== +What: /sys/fs/f2fs/<disk>/stat/issued_discard +Date: December 2023 +Contact: "Zhiguo Niu" <zhiguo.niu@unisoc.com> +Description: Shows the number of issued discard. + +What: /sys/fs/f2fs/<disk>/stat/queued_discard +Date: December 2023 +Contact: "Zhiguo Niu" <zhiguo.niu@unisoc.com> +Description: Shows the number of queued discard. + +What: /sys/fs/f2fs/<disk>/stat/undiscard_blks +Date: December 2023 +Contact: "Zhiguo Niu" <zhiguo.niu@unisoc.com> +Description: Shows the total number of undiscard blocks. + What: /sys/fs/f2fs/<disk>/ckpt_thread_ioprio Date: January 2021 Contact: "Daeho Jeong" <daehojeong@google.com> @@ -740,3 +755,9 @@ Description: When compress cache is on, it controls cached page If cached page percent exceed threshold, then deny caching compress page. The value should be in range of (0, 100], by default it was initialized as 20(%). + +What: /sys/fs/f2fs/<disk>/discard_io_aware +Date: November 2023 +Contact: "Chao Yu" <chao@kernel.org> +Description: It controls to enable/disable IO aware feature for background discard. + By default, the value is 1 which indicates IO aware is on. diff --git a/Documentation/ABI/testing/sysfs-kernel-mm-damon b/Documentation/ABI/testing/sysfs-kernel-mm-damon index b35649a46a2f..bfa5b8288d8d 100644 --- a/Documentation/ABI/testing/sysfs-kernel-mm-damon +++ b/Documentation/ABI/testing/sysfs-kernel-mm-damon @@ -25,12 +25,14 @@ Description: Writing 'on' or 'off' to this file makes the kdamond starts or stops, respectively. Reading the file returns the keywords based on the current status. Writing 'commit' to this file makes the kdamond reads the user inputs in the sysfs files - except 'state' again. Writing 'update_schemes_stats' to the - file updates contents of schemes stats files of the kdamond. - Writing 'update_schemes_tried_regions' to the file updates - contents of 'tried_regions' directory of every scheme directory - of this kdamond. Writing 'update_schemes_tried_bytes' to the - file updates only '.../tried_regions/total_bytes' files of this + except 'state' again. Writing 'commit_schemes_quota_goals' to + this file makes the kdamond reads the quota goal files again. + Writing 'update_schemes_stats' to the file updates contents of + schemes stats files of the kdamond. Writing + 'update_schemes_tried_regions' to the file updates contents of + 'tried_regions' directory of every scheme directory of this + kdamond. Writing 'update_schemes_tried_bytes' to the file + updates only '.../tried_regions/total_bytes' files of this kdamond. Writing 'clear_schemes_tried_regions' to the file removes contents of the 'tried_regions' directory. @@ -212,6 +214,25 @@ Contact: SeongJae Park <sj@kernel.org> Description: Writing to and reading from this file sets and gets the quotas charge reset interval of the scheme in milliseconds. +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/quotas/goals/nr_goals +Date: Nov 2023 +Contact: SeongJae Park <sj@kernel.org> +Description: Writing a number 'N' to this file creates the number of + directories for setting automatic tuning of the scheme's + aggressiveness named '0' to 'N-1' under the goals/ directory. + +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/quotas/goals/<G>/target_value +Date: Nov 2023 +Contact: SeongJae Park <sj@kernel.org> +Description: Writing to and reading from this file sets and gets the target + value of the goal metric. + +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/quotas/goals/<G>/current_value +Date: Nov 2023 +Contact: SeongJae Park <sj@kernel.org> +Description: Writing to and reading from this file sets and gets the current + value of the goal metric. + What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/quotas/weights/sz_permil Date: Mar 2022 Contact: SeongJae Park <sj@kernel.org> diff --git a/Documentation/ABI/testing/sysfs-nvmem-cells b/Documentation/ABI/testing/sysfs-nvmem-cells new file mode 100644 index 000000000000..c7c9444f92a8 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-nvmem-cells @@ -0,0 +1,21 @@ +What: /sys/bus/nvmem/devices/.../cells/<cell-name> +Date: May 2023 +KernelVersion: 6.5 +Contact: Miquel Raynal <miquel.raynal@bootlin.com> +Description: + The "cells" folder contains one file per cell exposed by the + NVMEM device. The name of the file is: "<name>@<byte>,<bit>", + with <name> being the cell name and <where> its location in + the NVMEM device, in hexadecimal bytes and bits (without the + '0x' prefix, to mimic device tree node names). The length of + the file is the size of the cell (when known). The content of + the file is the binary content of the cell (may sometimes be + ASCII, likely without trailing character). + Note: This file is only present if CONFIG_NVMEM_SYSFS + is enabled. + + Example:: + + hexdump -C /sys/bus/nvmem/devices/1-00563/cells/product-name@d,0 + 00000000 54 4e 34 38 4d 2d 50 2d 44 4e |TN48M-P-DN| + 0000000a diff --git a/Documentation/ABI/testing/sysfs-platform-silicom b/Documentation/ABI/testing/sysfs-platform-silicom new file mode 100644 index 000000000000..4d1cc5bdbcc5 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-platform-silicom @@ -0,0 +1,30 @@ +What: /sys/devices/platform/silicom-platform/uc_version +Date: November 2023 +KernelVersion: 6.7 +Contact: Henry Shi <henrys@silicom-usa.com> +Description: + This file allows to read microcontroller firmware + version of current platform. + +What: /sys/devices/platform/silicom-platform/power_cycle +Date: November 2023 +KernelVersion: 6.7 +Contact: Henry Shi <henrys@silicom-usa.com> +Description: + This file allow user to power cycle the platform. + Default value is 0; when set to 1, it powers down + the platform, waits 5 seconds, then powers on the + device. It returns to default value after power cycle. + + 0 - default value. + +What: /sys/devices/platform/silicom-platform/efuse_status +Date: November 2023 +KernelVersion: 6.7 +Contact: Henry Shi <henrys@silicom-usa.com> +Description: + This file is read only. It returns the current + OTP status: + + 0 - not programmed. + 1 - programmed. |