aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorOlof Johansson <olof@lixom.net>2015-09-26 22:22:31 -0700
committerOlof Johansson <olof@lixom.net>2015-09-26 22:22:31 -0700
commitb8ba826f8d9587fe830d29a0d03abb5b1e0a76e5 (patch)
tree0f66297ec1726997cc76c416e961201c88dd9eb8
parentfe5b2756c1acbfc2d9df380523ef6320e69bb166 (diff)
parent9a5e3f27d1b8ca349b79e8b5fe1874eeeedb6f45 (diff)
downloadlinux-yocto-b8ba826f8d9587fe830d29a0d03abb5b1e0a76e5.tar.gz
linux-yocto-b8ba826f8d9587fe830d29a0d03abb5b1e0a76e5.tar.bz2
linux-yocto-b8ba826f8d9587fe830d29a0d03abb5b1e0a76e5.zip
Merge tag 'omap-for-v4.3/fixes-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Fixes for omaps for v4.3-rc cycle: - Two more patches to fix most of the MMC regressions with the PBIAS regulator changes. At least two MMC driver related issues still seems to remain for omap3 legacy booting and omap4 duovero. Note that the dts changes depend on a recent regulator fix, and are based on the regulator commit now in mainline kernel - Enable autoidle for am43xx clocks to prevent clocks from staying always on - Fix i2c5 pinctrl offsets for omap5-uevm - Enable PCA953X as that's needed for HDMI to work on omap5 - Update phy supplies for beagle x15 beta board - Use palmas-usb for on beagle x15 to start using the related driver that recently got merged * tag 'omap-for-v4.3/fixes-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: fix omap2+ address translation for pbias ARM: dts: am57xx-beagle-x15: use palmas-usb for USB2 ARM: omap2plus_defconfig: enable GPIO_PCA953X ARM: dts: omap5-uevm.dts: fix i2c5 pinctrl offsets ARM: OMAP2+: AM43XX: Enable autoidle for clks in am43xx_init_late ARM: dts: am57xx-beagle-x15: Update Phy supplies regulator: pbias: program pbias register offset in pbias driver ARM: omap2plus_defconfig: Enable MUSB DMA support ARM: DRA752: Add ID detect for ES2.0 ARM: OMAP3: vc: fix 'or' always true warning ARM: OMAP2+: Fix booting if no timer parent clock is available ARM: OMAP2+: omap-device: fix race deferred probe of omap_hsmmc vs omap_device_late_init Signed-off-by: Olof Johansson <olof@lixom.net>
-rw-r--r--Documentation/devicetree/bindings/regulator/pbias-regulator.txt7
-rw-r--r--arch/arm/boot/dts/am57xx-beagle-x15.dts42
-rw-r--r--arch/arm/boot/dts/dra7.dtsi1
-rw-r--r--arch/arm/boot/dts/omap2430.dtsi1
-rw-r--r--arch/arm/boot/dts/omap3.dtsi25
-rw-r--r--arch/arm/boot/dts/omap4.dtsi1
-rw-r--r--arch/arm/boot/dts/omap5-uevm.dts4
-rw-r--r--arch/arm/boot/dts/omap5.dtsi1
-rw-r--r--arch/arm/configs/omap2plus_defconfig3
-rw-r--r--arch/arm/mach-omap2/id.c8
-rw-r--r--arch/arm/mach-omap2/io.c1
-rw-r--r--arch/arm/mach-omap2/omap_device.c3
-rw-r--r--arch/arm/mach-omap2/soc.h2
-rw-r--r--arch/arm/mach-omap2/timer.c8
-rw-r--r--arch/arm/mach-omap2/vc.c2
-rw-r--r--drivers/regulator/pbias-regulator.c56
16 files changed, 119 insertions, 46 deletions
diff --git a/Documentation/devicetree/bindings/regulator/pbias-regulator.txt b/Documentation/devicetree/bindings/regulator/pbias-regulator.txt
index 32aa26f1e434..acbcb452a69a 100644
--- a/Documentation/devicetree/bindings/regulator/pbias-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/pbias-regulator.txt
@@ -2,7 +2,12 @@ PBIAS internal regulator for SD card dual voltage i/o pads on OMAP SoCs.
Required properties:
- compatible:
- - "ti,pbias-omap" for OMAP2, OMAP3, OMAP4, OMAP5, DRA7.
+ - should be "ti,pbias-dra7" for DRA7
+ - should be "ti,pbias-omap2" for OMAP2
+ - should be "ti,pbias-omap3" for OMAP3
+ - should be "ti,pbias-omap4" for OMAP4
+ - should be "ti,pbias-omap5" for OMAP5
+ - "ti,pbias-omap" is deprecated
- reg: pbias register offset from syscon base and size of pbias register.
- syscon : phandle of the system control module
- regulator-name : should be
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index a4274abf1437..568adf5efde0 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -98,13 +98,6 @@
pinctrl-0 = <&extcon_usb1_pins>;
};
- extcon_usb2: extcon_usb2 {
- compatible = "linux,extcon-usb-gpio";
- id-gpio = <&gpio7 24 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&extcon_usb2_pins>;
- };
-
hdmi0: connector {
compatible = "hdmi-connector";
label = "hdmi";
@@ -326,12 +319,6 @@
>;
};
- extcon_usb2_pins: extcon_usb2_pins {
- pinctrl-single,pins = <
- 0x3e8 (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_ctsn.gpio7_24 */
- >;
- };
-
tpd12s015_pins: pinmux_tpd12s015_pins {
pinctrl-single,pins = <
0x3b0 (PIN_OUTPUT | MUX_MODE14) /* gpio7_10 CT_CP_HPD */
@@ -432,7 +419,7 @@
};
ldo3_reg: ldo3 {
- /* VDDA_1V8_PHY */
+ /* VDDA_1V8_PHYA */
regulator-name = "ldo3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -440,6 +427,15 @@
regulator-boot-on;
};
+ ldo4_reg: ldo4 {
+ /* VDDA_1V8_PHYB */
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
ldo9_reg: ldo9 {
/* VDD_RTC */
regulator-name = "ldo9";
@@ -495,6 +491,14 @@
gpio-controller;
#gpio-cells = <2>;
};
+
+ extcon_usb2: tps659038_usb {
+ compatible = "ti,palmas-usb-vid";
+ ti,enable-vbus-detection;
+ ti,enable-id-detection;
+ id-gpios = <&gpio7 24 GPIO_ACTIVE_HIGH>;
+ };
+
};
tmp102: tmp102@48 {
@@ -623,6 +627,14 @@
};
&usb2 {
+ /*
+ * Stand alone usage is peripheral only.
+ * However, with some resistor modifications
+ * this port can be used via expansion connectors
+ * as "host" or "dual-role". If so, provide
+ * the necessary dr_mode override in the expansion
+ * board's DT.
+ */
dr_mode = "peripheral";
};
@@ -681,7 +693,7 @@
&hdmi {
status = "ok";
- vdda-supply = <&ldo3_reg>;
+ vdda-supply = <&ldo4_reg>;
pinctrl-names = "default";
pinctrl-0 = <&hdmi_pins>;
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index fed95a4547ee..e289c706d27d 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -120,6 +120,7 @@
reg = <0x0 0x1400>;
#address-cells = <1>;
#size-cells = <1>;
+ ranges = <0 0x0 0x1400>;
pbias_regulator: pbias_regulator {
compatible = "ti,pbias-dra7", "ti,pbias-omap";
diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi
index 3961a6f170e1..798dda072b2a 100644
--- a/arch/arm/boot/dts/omap2430.dtsi
+++ b/arch/arm/boot/dts/omap2430.dtsi
@@ -56,6 +56,7 @@
reg = <0x270 0x240>;
#address-cells = <1>;
#size-cells = <1>;
+ ranges = <0 0x270 0x240>;
scm_clocks: clocks {
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 9af9ae190299..8a2b25332b8c 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -113,10 +113,22 @@
};
scm_conf: scm_conf@270 {
- compatible = "syscon";
+ compatible = "syscon", "simple-bus";
reg = <0x270 0x330>;
#address-cells = <1>;
#size-cells = <1>;
+ ranges = <0 0x270 0x330>;
+
+ pbias_regulator: pbias_regulator {
+ compatible = "ti,pbias-omap3", "ti,pbias-omap";
+ reg = <0x2b0 0x4>;
+ syscon = <&scm_conf>;
+ pbias_mmc_reg: pbias_mmc_omap2430 {
+ regulator-name = "pbias_mmc_omap2430";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ };
+ };
scm_clocks: clocks {
#address-cells = <1>;
@@ -202,17 +214,6 @@
dma-requests = <96>;
};
- pbias_regulator: pbias_regulator {
- compatible = "ti,pbias-omap3", "ti,pbias-omap";
- reg = <0x2b0 0x4>;
- syscon = <&scm_conf>;
- pbias_mmc_reg: pbias_mmc_omap2430 {
- regulator-name = "pbias_mmc_omap2430";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3000000>;
- };
- };
-
gpio1: gpio@48310000 {
compatible = "ti,omap3-gpio";
reg = <0x48310000 0x200>;
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 5aad7f37df8b..5a206c100ce2 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -196,6 +196,7 @@
reg = <0x5a0 0x170>;
#address-cells = <1>;
#size-cells = <1>;
+ ranges = <0 0x5a0 0x170>;
pbias_regulator: pbias_regulator {
compatible = "ti,pbias-omap4", "ti,pbias-omap";
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 3cc8f357d5b8..3cb030f9d2c4 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -174,8 +174,8 @@
i2c5_pins: pinmux_i2c5_pins {
pinctrl-single,pins = <
- 0x184 (PIN_INPUT | MUX_MODE0) /* i2c5_scl */
- 0x186 (PIN_INPUT | MUX_MODE0) /* i2c5_sda */
+ 0x186 (PIN_INPUT | MUX_MODE0) /* i2c5_scl */
+ 0x188 (PIN_INPUT | MUX_MODE0) /* i2c5_sda */
>;
};
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 8d5f9d26110e..4c04389dab32 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -185,6 +185,7 @@
reg = <0x5a0 0xec>;
#address-cells = <1>;
#size-cells = <1>;
+ ranges = <0 0x5a0 0xec>;
pbias_regulator: pbias_regulator {
compatible = "ti,pbias-omap5", "ti,pbias-omap";
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 1860f517421d..3f15a5cae167 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -240,6 +240,7 @@ CONFIG_SSI_PROTOCOL=m
CONFIG_PINCTRL_SINGLE=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_PCA953X=m
CONFIG_GPIO_PCF857X=y
CONFIG_GPIO_TWL4030=y
CONFIG_GPIO_PALMAS=y
@@ -350,6 +351,8 @@ CONFIG_USB_MUSB_HDRC=m
CONFIG_USB_MUSB_OMAP2PLUS=m
CONFIG_USB_MUSB_AM35X=m
CONFIG_USB_MUSB_DSPS=m
+CONFIG_USB_INVENTRA_DMA=y
+CONFIG_USB_TI_CPPI41_DMA=y
CONFIG_USB_DWC3=m
CONFIG_USB_TEST=m
CONFIG_AM335X_PHY_USB=y
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index e3f713ffb06b..54a5ba54d2ff 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -653,8 +653,12 @@ void __init dra7xxx_check_revision(void)
omap_revision = DRA752_REV_ES1_0;
break;
case 1:
- default:
omap_revision = DRA752_REV_ES1_1;
+ break;
+ case 2:
+ default:
+ omap_revision = DRA752_REV_ES2_0;
+ break;
}
break;
@@ -674,7 +678,7 @@ void __init dra7xxx_check_revision(void)
/* Unknown default to latest silicon rev as default*/
pr_warn("%s: unknown idcode=0x%08x (hawkeye=0x%08x,rev=0x%x)\n",
__func__, idcode, hawkeye, rev);
- omap_revision = DRA752_REV_ES1_1;
+ omap_revision = DRA752_REV_ES2_0;
}
sprintf(soc_name, "DRA%03x", omap_rev() >> 16);
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 980c9372e6fd..3eaeaca5da05 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -676,6 +676,7 @@ void __init am43xx_init_early(void)
void __init am43xx_init_late(void)
{
omap_common_late_init();
+ omap2_clk_enable_autoidle_all();
}
#endif
diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c
index 4cb8fd9f741f..72ebc4c16bae 100644
--- a/arch/arm/mach-omap2/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c
@@ -901,7 +901,8 @@ static int __init omap_device_late_idle(struct device *dev, void *data)
if (od->hwmods[i]->flags & HWMOD_INIT_NO_IDLE)
return 0;
- if (od->_driver_status != BUS_NOTIFY_BOUND_DRIVER) {
+ if (od->_driver_status != BUS_NOTIFY_BOUND_DRIVER &&
+ od->_driver_status != BUS_NOTIFY_BIND_DRIVER) {
if (od->_state == OMAP_DEVICE_STATE_ENABLED) {
dev_warn(dev, "%s: enabled but no driver. Idling\n",
__func__);
diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h
index f97654d11ea5..2d1d3845253c 100644
--- a/arch/arm/mach-omap2/soc.h
+++ b/arch/arm/mach-omap2/soc.h
@@ -469,6 +469,8 @@ IS_OMAP_TYPE(3430, 0x3430)
#define DRA7XX_CLASS 0x07000000
#define DRA752_REV_ES1_0 (DRA7XX_CLASS | (0x52 << 16) | (0x10 << 8))
#define DRA752_REV_ES1_1 (DRA7XX_CLASS | (0x52 << 16) | (0x11 << 8))
+#define DRA752_REV_ES2_0 (DRA7XX_CLASS | (0x52 << 16) | (0x20 << 8))
+#define DRA722_REV_ES1_0 (DRA7XX_CLASS | (0x22 << 16) | (0x10 << 8))
#define DRA722_REV_ES1_0 (DRA7XX_CLASS | (0x22 << 16) | (0x10 << 8))
void omap2xxx_check_revision(void);
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index e4d8701f99f9..a55655127ef2 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -297,12 +297,8 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
if (IS_ERR(src))
return PTR_ERR(src);
- r = clk_set_parent(timer->fclk, src);
- if (r < 0) {
- pr_warn("%s: %s cannot set source\n", __func__, oh->name);
- clk_put(src);
- return r;
- }
+ WARN(clk_set_parent(timer->fclk, src) < 0,
+ "Cannot set timer parent clock, no PLL clock driver?");
clk_put(src);
diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c
index e5a35f6b83a7..d44d311704ba 100644
--- a/arch/arm/mach-omap2/vc.c
+++ b/arch/arm/mach-omap2/vc.c
@@ -300,7 +300,7 @@ static void __init omap3_vc_init_pmic_signaling(struct voltagedomain *voltdm)
val = voltdm->read(OMAP3_PRM_POLCTRL_OFFSET);
if (!(val & OMAP3430_PRM_POLCTRL_CLKREQ_POL) ||
- (val & OMAP3430_PRM_POLCTRL_CLKREQ_POL)) {
+ (val & OMAP3430_PRM_POLCTRL_OFFMODE_POL)) {
val |= OMAP3430_PRM_POLCTRL_CLKREQ_POL;
val &= ~OMAP3430_PRM_POLCTRL_OFFMODE_POL;
pr_debug("PM: fixing sys_clkreq and sys_off_mode polarity to 0x%x\n",
diff --git a/drivers/regulator/pbias-regulator.c b/drivers/regulator/pbias-regulator.c
index 4fa7bcaf454e..f9d74d63be7c 100644
--- a/drivers/regulator/pbias-regulator.c
+++ b/drivers/regulator/pbias-regulator.c
@@ -45,6 +45,10 @@ struct pbias_regulator_data {
int voltage;
};
+struct pbias_of_data {
+ unsigned int offset;
+};
+
static const unsigned int pbias_volt_table[] = {
1800000,
3000000
@@ -102,8 +106,35 @@ static struct of_regulator_match pbias_matches[] = {
};
#define PBIAS_NUM_REGS ARRAY_SIZE(pbias_matches)
+/* Offset from SCM general area (and syscon) base */
+
+static const struct pbias_of_data pbias_of_data_omap2 = {
+ .offset = 0x230,
+};
+
+static const struct pbias_of_data pbias_of_data_omap3 = {
+ .offset = 0x2b0,
+};
+
+static const struct pbias_of_data pbias_of_data_omap4 = {
+ .offset = 0x60,
+};
+
+static const struct pbias_of_data pbias_of_data_omap5 = {
+ .offset = 0x60,
+};
+
+static const struct pbias_of_data pbias_of_data_dra7 = {
+ .offset = 0xe00,
+};
+
static const struct of_device_id pbias_of_match[] = {
{ .compatible = "ti,pbias-omap", },
+ { .compatible = "ti,pbias-omap2", .data = &pbias_of_data_omap2, },
+ { .compatible = "ti,pbias-omap3", .data = &pbias_of_data_omap3, },
+ { .compatible = "ti,pbias-omap4", .data = &pbias_of_data_omap4, },
+ { .compatible = "ti,pbias-omap5", .data = &pbias_of_data_omap5, },
+ { .compatible = "ti,pbias-dra7", .data = &pbias_of_data_dra7, },
{},
};
MODULE_DEVICE_TABLE(of, pbias_of_match);
@@ -118,6 +149,9 @@ static int pbias_regulator_probe(struct platform_device *pdev)
const struct pbias_reg_info *info;
int ret = 0;
int count, idx, data_idx = 0;
+ const struct of_device_id *match;
+ const struct pbias_of_data *data;
+ unsigned int offset;
count = of_regulator_match(&pdev->dev, np, pbias_matches,
PBIAS_NUM_REGS);
@@ -133,6 +167,20 @@ static int pbias_regulator_probe(struct platform_device *pdev)
if (IS_ERR(syscon))
return PTR_ERR(syscon);
+ match = of_match_device(of_match_ptr(pbias_of_match), &pdev->dev);
+ if (match && match->data) {
+ data = match->data;
+ offset = data->offset;
+ } else {
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -EINVAL;
+
+ offset = res->start;
+ dev_WARN(&pdev->dev,
+ "using legacy dt data for pbias offset\n");
+ }
+
cfg.regmap = syscon;
cfg.dev = &pdev->dev;
@@ -145,10 +193,6 @@ static int pbias_regulator_probe(struct platform_device *pdev)
if (!info)
return -ENODEV;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res)
- return -EINVAL;
-
drvdata[data_idx].syscon = syscon;
drvdata[data_idx].info = info;
drvdata[data_idx].desc.name = info->name;
@@ -158,9 +202,9 @@ static int pbias_regulator_probe(struct platform_device *pdev)
drvdata[data_idx].desc.volt_table = pbias_volt_table;
drvdata[data_idx].desc.n_voltages = 2;
drvdata[data_idx].desc.enable_time = info->enable_time;
- drvdata[data_idx].desc.vsel_reg = res->start;
+ drvdata[data_idx].desc.vsel_reg = offset;
drvdata[data_idx].desc.vsel_mask = info->vmode;
- drvdata[data_idx].desc.enable_reg = res->start;
+ drvdata[data_idx].desc.enable_reg = offset;
drvdata[data_idx].desc.enable_mask = info->enable_mask;
drvdata[data_idx].desc.enable_val = info->enable;
drvdata[data_idx].desc.disable_val = info->disable_val;