aboutsummaryrefslogtreecommitdiffstats
path: root/tools
AgeCommit message (Collapse)Author
2016-08-28Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Thomas Gleixner: "A few fixes from the perf departement - prevent a imbalanced preemption disable in the events teardown code - prevent out of bound acces in perf userspace - make perf tools compile with UCLIBC again - a fix for the userspace unwinder utility" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Use this_cpu_ptr() when stopping AUX events perf evsel: Do not access outside hw cache name arrays tools lib: Reinstate strlcpy() header guard with __UCLIBC__ perf unwind: Use addr_location::addr instead of ip for entries
2016-08-22Merge tag 'gpio-v4.8-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "Here are a few GPIO fixes for v4.8. I was expecting some fallout from the new chardev rework but nothing like that turned up att all. Instead a Kconfig confusion that I think I have finally nailed, then some ordinary driver noise and trivia. This fixes a Kconfig issue with UM: when I made GPIOLIB available to all archs, that included UM, but the OF part of GPIOLIB requires HAS_IOMEM, so we add HAS_IOMEM as a dependency to OF_GPIO. This in turn exposed the fact that a few GPIO drivers were implicitly assuming OF_GPIO as their dependency but instead depended on OF alone (the typical problem being a pointer inside gpio_chip not existing unless OF_GPIO is selected) and then UM would fail to compile with these drivers instead. Then I lost patience and made any GPIO driver depending on just OF depend on OF_GPIO instead, that is certainly what they meant and the only thing that makes sense anyway. GPIO with just OF but !OF_GPIO does not make sense. Also a fix for the max730x driver data pointer, and a minor comment fix for the GPIO tools" * tag 'gpio-v4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: make any OF dependent driver depend on OF_GPIO gpio: Fix OF build problem on UM gpio: max730x: set gpiochip data pointer before using it tools/gpio: fix gpio-event-mon header comment
2016-08-18Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Mostly tooling fixes, but also start/stop filter related fixes, a perf event read() fix, a fix uncovered by fuzzing, and an uprobes leak fix" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Check return value of the perf_event_read() IPI perf/core: Enable mapping of the stop filters perf/core: Update filters only on executable mmap perf/core: Fix file name handling for start/stop filters perf/core: Fix event_function_local() uprobes: Fix the memcg accounting perf intel-pt: Fix occasional decoding errors when tracing system-wide tools: Sync kvm related header files for arm64 and s390 perf probe: Release resources on error when handling exit paths perf probe: Check for dup and fdopen failures perf symbols: Fix annotation of objects with debuginfo files perf script: Don't disable use_callchain if input is pipe perf script: Show proper message when failed list scripts perf jitdump: Add the right header to get the major()/minor() definitions perf ppc64le: Fix build failure when libelf is not present perf tools mem: Fix -t store option for record command perf intel-pt: Fix ip compression
2016-08-18perf evsel: Do not access outside hw cache name arraysArnaldo Carvalho de Melo
We have to check if the values are >= *_MAX, not just >, fix it. From the bugzilla report: ''In file /tools/perf/util/evsel.c function __perf_evsel__hw_cache_name it appears that there is a bug that reads beyond the end of the buffer. The statement "if (type > PERF_COUNT_HW_CACHE_MAX)" allows type to be equal to the maximum value. Later, when statement "if (!perf_evsel__is_cache_op_valid(type, op))" is executed, the function can access array perf_evsel__hw_cache_stat[type] beyond the end of the buffer. It appears to me that the statement "if (type > PERF_COUNT_HW_CACHE_MAX)" should be "if (type >= PERF_COUNT_HW_CACHE_MAX)" Bug found with Coverity and manual code review. No attempts were made to execute the code with a maximum type value.'' Committer note: Testing it: $ perf record -e $(echo $(perf list cache | cut -d \[ -f1) | sed 's/ /,/g') usleep 1 [ perf record: Woken up 16 times to write data ] [ perf record: Captured and wrote 0.023 MB perf.data (34 samples) ] $ perf evlist L1-dcache-load-misses L1-dcache-loads L1-dcache-stores L1-icache-load-misses LLC-load-misses LLC-loads LLC-store-misses LLC-stores branch-load-misses branch-loads dTLB-load-misses dTLB-loads dTLB-store-misses dTLB-stores iTLB-load-misses iTLB-loads node-load-misses node-loads node-store-misses node-stores $ perf list cache List of pre-defined events (to be used in -e): L1-dcache-load-misses [Hardware cache event] L1-dcache-loads [Hardware cache event] L1-dcache-stores [Hardware cache event] L1-icache-load-misses [Hardware cache event] LLC-load-misses [Hardware cache event] LLC-loads [Hardware cache event] LLC-store-misses [Hardware cache event] LLC-stores [Hardware cache event] branch-load-misses [Hardware cache event] branch-loads [Hardware cache event] dTLB-load-misses [Hardware cache event] dTLB-loads [Hardware cache event] dTLB-store-misses [Hardware cache event] dTLB-stores [Hardware cache event] iTLB-load-misses [Hardware cache event] iTLB-loads [Hardware cache event] node-load-misses [Hardware cache event] node-loads [Hardware cache event] node-store-misses [Hardware cache event] node-stores [Hardware cache event] $ Reported-by: Brian Sweeney <bsweeney@lgsinnovations.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=153351 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-18tools lib: Reinstate strlcpy() header guard with __UCLIBC__Vineet Gupta
perf tools build in recent kernels spews splat when cross compiling with uClibc: | CC util/alias.o | In file included from tools/perf/util/../ui/../util/cache.h:8:0, | from tools/perf/util/../ui/helpline.h:7, | from tools/perf/util/debug.h:8, | from arch/../util/cpumap.h:9, | from arch/../util/env.h:5, | from arch/common.h:4, | from arch/common.c:3: | tools/include/linux/string.h:12:15: warning: redundant redeclaration of ‘strlcpy’ [-Wredundant-decls] | extern size_t strlcpy(char *dest, const char *src, size_t size); ^ This is after commit 61a6445e463a31 ("tools lib: Guard the strlcpy() header with __GLIBC__"). The problem is uClibc also defines __GLIBC__ for exported headers for applications. So add that specific check to not trip for uClibc. Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petri Gynther <pgynther@google.com> Cc: Wang Nan <wangnan0@huawei.com> Cc: linux-snps-arc@lists.infradead.org Link: http://lkml.kernel.org/r/1471537703-16439-1-git-send-email-vgupta@synopsys.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-16Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio/vhost fixes from Michael Tsirkin: - test fixes - a vsock fix * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: tools/virtio: add dma stubs vhost/test: fix after swiotlb changes vhost/vsock: drop space available check for TX vq ringtest: test build fix
2016-08-16perf unwind: Use addr_location::addr instead of ip for entriesMilian Wolff
This fixes the srcline translation for call chains of user space applications. Before we got: perf report --stdio --no-children -s sym,srcline -g address 8.92% [.] main mandelbrot.h:41 | |--3.70%--main +8390240 | __libc_start_main +139950056726769 | _start +8388650 | |--2.74%--main +8390189 | --2.08%--main +8390296 __libc_start_main +139950056726769 _start +8388650 7.59% [.] main complex:1326 | |--4.79%--main +8390203 | __libc_start_main +139950056726769 | _start +8388650 | --2.80%--main +8390219 7.12% [.] __muldc3 libgcc2.c:1945 | |--3.76%--__muldc3 +139950060519490 | main +8390224 | __libc_start_main +139950056726769 | _start +8388650 | --3.32%--__muldc3 +139950060519512 main +8390224 With this patch applied, we instead get: perf report --stdio --no-children -s sym,srcline -g address 8.92% [.] main mandelbrot.h:41 | |--3.70%--main mandelbrot.h:41 | __libc_start_main +241 | _start +4194346 | |--2.74%--main mandelbrot.h:41 | --2.08%--main mandelbrot.h:41 __libc_start_main +241 _start +4194346 7.59% [.] main complex:1326 | |--4.79%--main complex:1326 | __libc_start_main +241 | _start +4194346 | --2.80%--main complex:1326 7.12% [.] __muldc3 libgcc2.c:1945 | |--3.76%--__muldc3 libgcc2.c:1945 | main mandelbrot.h:39 | __libc_start_main +241 | _start +4194346 | --3.32%--__muldc3 libgcc2.c:1945 main mandelbrot.h:39 Suggested-and-Acked-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Milian Wolff <milian.wolff@kdab.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> LPU-Reference: 20160816153926.11288-1-milian.wolff@kdab.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-16Merge tag 'perf-urgent-for-mingo-20160815' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: - Fix occasional decoding errors when tracing system-wide with Intel PT (Adrian Hunter) - Fix ip compression in Intel PT for some specific packet types not present on current hardware (Adrian Hunter) - Fix annotation of objects with debuginfo files (Anton Blanchard) - Fix build on Fedora Rawhide (25) wrt using the right header to get the major() & minor() definitions in the jitdump code, now it is deprecated getting those using sys/types.h, one has to use sys/sysmacros.h (Arnaldo Carvalho de Melo) - Sync arm64/s390 kvm related header files (Arnaldo Carvalho de Melo) - Check for dup and fdopen failures in 'perf probe' (Colin Ian King, Arnaldo Carvalho de Melo) - Fix showing callchains in pipe mode, i.e. perf record -g -o - workload | perf script now shows callchains (He Kuang) - Show proper message when the scripts directory points to some invalid location in 'perf script --list' (He Kuang) - Fix 'perf mem -t store' to record 'cpu/mem-stores/P' events again (Jiri Olsa) - Fix ppc64le build failure when libelf is not present (Ravi Bangoria) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-15perf intel-pt: Fix occasional decoding errors when tracing system-wideAdrian Hunter
In order to successfully decode Intel PT traces, context switch events are needed from the moment the trace starts. Currently that is ensured by using the 'immediate' flag which enables the switch event when it is opened. However, since commit 86c2786994bd ("perf intel-pt: Add support for PERF_RECORD_SWITCH") that might not always happen. When tracing system-wide the context switch event is added to the tracking event which was not set as 'immediate'. Change that so it is. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org # v4.4+ Fixes: 86c2786994bd ("perf intel-pt: Add support for PERF_RECORD_SWITCH") Link: http://lkml.kernel.org/r/1471245784-22580-1-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-15tools: Sync kvm related header files for arm64 and s390Arnaldo Carvalho de Melo
From a quick look nothing stands out as requiring changes to kvm tools such as tools/perf/arch/s390/util/kvm-stat.c. Silences these header checking warnings: $ make -C tools/perf make: Entering directory '/home/acme/git/linux/tools/perf' BUILD: Doing 'make -j4' parallel build Warning: tools/arch/s390/include/uapi/asm/kvm.h differs from kernel Warning: tools/arch/s390/include/uapi/asm/sie.h differs from kernel Warning: tools/arch/arm64/include/uapi/asm/kvm.h differs from kernel <SNIP> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Yarygin <yarygin@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Scott Wood <scottwood@freescale.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-btutge414g516qmh6r5ienlj@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-15perf probe: Release resources on error when handling exit pathsArnaldo Carvalho de Melo
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Colin King <colin.king@canonical.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-zh2j4iqimralugke5qq7dn6d@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-15perf probe: Check for dup and fdopen failuresColin Ian King
dup and fdopen can potentially fail, so add some extra error handling checks rather than assuming they always work. Signed-off-by: Colin King <colin.king@canonical.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1471038296-12956-1-git-send-email-colin.king@canonical.com [ Free resources when those functions (now being verified) fail ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-15perf symbols: Fix annotation of objects with debuginfo filesAnton Blanchard
Commit 73cdf0c6ea9c ("perf symbols: Record text offset in dso to calculate objdump address") started storing the offset of the text section for all DSOs: if (elf_section_by_name(elf, &ehdr, &tshdr, ".text", NULL)) dso->text_offset = tshdr.sh_addr - tshdr.sh_offset; Unfortunately this breaks debuginfo files, because we need to calculate the offset of the text section in the associated executable file. As a result perf annotate returns junk for all debuginfo files. Fix this by using runtime_ss->elf which should point at the executable when parsing a debuginfo file. Signed-off-by: Anton Blanchard <anton@samba.org> Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Tested-by: Wang Nan <wangnan0@huawei.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: stable@vger.kernel.org # v4.6+ Fixes: 73cdf0c6ea9c ("perf symbols: Record text offset in dso to calculate objdump address") Link: http://lkml.kernel.org/r/20160813115533.6de17912@kryten Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-15perf script: Don't disable use_callchain if input is pipeHe Kuang
Because perf data from pipe do not have a header with evsel attr, we should not check that and disable symbol_conf.use_callchain. Otherwise, perf script won't show callchains even if the data stream contains callchain. Before: $ perf record -g -o - uname |perf script Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.000 MB - ] uname 1828 182630.186578: 250000 cpu-clock: ..b9499 setup_arg_pages uname 1828 182630.186850: 250000 cpu-clock: ..83b20 ___might_sleep uname 1828 182630.187153: 250000 cpu-clock: ..4b6be file_map_prot_ch ... After: $ perf record -g -o - uname |perf script Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.000 MB - ] uname 1833 182675.927099: 250000 cpu-clock: ba5520 _raw_spin_lock+0xfe200040 ([kernel.kallsyms]) 389dd4 expand_downwards+0xfe200154 ([kernel.kallsyms]) 389f34 expand_stack+0xfe200024 ([kernel.kallsyms]) 3b957e setup_arg_pages+0xfe20019e ([kernel.kallsyms]) 40c80f load_elf_binary+0xfe20042f ([kernel.kallsyms]) ... Signed-off-by: He Kuang <hekuang@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1470309943-153909-2-git-send-email-hekuang@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-15perf script: Show proper message when failed list scriptsHe Kuang
Perf shows the usage message when perf scripts folder failed to open, which misleads users to let them think the command is being mistyped. This patch shows a proper message and guides users to check the PERF_EXEC_PATH environment variable in that case. Before: $ perf script --list Usage: perf script [<options>] or: perf script [<options>] record <script> [<record-options>] <command> or: perf script [<options>] report <script> [script-args] or: perf script [<options>] <script> [<record-options>] <command> or: perf script [<options>] <top-script> [script-args] -l, --list list available scripts After: $ perf script --list open(/home/user/perf-core/scripts) failed. Check for "PERF_EXEC_PATH" env to set scripts dir. Signed-off-by: He Kuang <hekuang@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1470309943-153909-1-git-send-email-hekuang@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-15perf jitdump: Add the right header to get the major()/minor() definitionsArnaldo Carvalho de Melo
Noticed on Fedora Rawhide: $ gcc --version gcc (GCC) 6.1.1 20160721 (Red Hat 6.1.1-4) $ rpm -q glibc glibc-2.24.90-1.fc26.x86_64 $ CC /tmp/build/perf/util/jitdump.o util/jitdump.c: In function 'jit_repipe_code_load': util/jitdump.c:428:2: error: '__major_from_sys_types' is deprecated: In the GNU C Library, `major' is defined by <sys/sysmacros.h>. For historical compatibility, it is currently defined by <sys/types.h> as well, but we plan to remove this soon. To use `major', include <sys/sysmacros.h> directly. If you did not intend to use a system-defined macro `major', you should #undef it after including <sys/types.h>. [-Werror=deprecated-declarations] event->mmap2.maj = major(st.st_dev); ^~~~~ In file included from /usr/include/features.h:397:0, from /usr/include/sys/types.h:25, from util/jitdump.c:1: /usr/include/sys/sysmacros.h:87:1: note: declared here __SYSMACROS_DEFINE_MAJOR (__SYSMACROS_FST_IMPL_TEMPL) Fix it following that recomendation. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-3majvd0adhfr25rvx4v5e9te@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-15tools/virtio: add dma stubsMichael S. Tsirkin
Fixes build after recent IOMMU-related changes, mustly by adding more stubs. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-08-15ringtest: test build fixMichael S. Tsirkin
Recent changes to ptr_ring broke the ringtest which lacks a likely() stub. Fix it up. Fixes: 982fb490c298896d15e9323a882f34a57c11ff56 ("ptr_ring: support zero length ring") Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-08-12Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Mostly tooling fixes, plus two uncore-PMU fixes, an uprobes fix, a perf-cgroups fix and an AUX events fix" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/uncore: Add enable_box for client MSR uncore perf/x86/intel/uncore: Fix uncore num_counters uprobes/x86: Fix RIP-relative handling of EVEX-encoded instructions perf/core: Set cgroup in CPU contexts for new cgroup events perf/core: Fix sideband list-iteration vs. event ordering NULL pointer deference crash perf probe ppc64le: Fix probe location when using DWARF perf probe: Add function to post process kernel trace events tools: Sync cpufeatures headers with the kernel toops: Sync tools/include/uapi/linux/bpf.h with the kernel tools: Sync cpufeatures.h and vmx.h with the kernel perf probe: Support signedness casting perf stat: Avoid skew when reading events perf probe: Fix module name matching perf probe: Adjust map->reloc offset when finding kernel symbol from map perf hists: Trim libtraceevent trace_seq buffers perf script: Add 'bpf-output' field to usage message
2016-08-12Merge branch 'libnvdimm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fixes from Dan Williams: - Fix for the nd_blk (NVDIMM Block Window Aperture) driver. A spec clarification requires the driver to mask off reserved bits in status register. This is tagged for -stable back to the v4.2 kernel. - Fix for a kernel crash in the nvdimm unit tests when module loading is interrupted with SIGTERM. Tagged for -stable since validation efforts external to Intel use the unit tests for qualifying backports. - Add a new 'size' sysfs attribute for the BTT (NVDIMM Block Translation Table) driver to make it symmetric with the other namespace personality drivers (PFN and DAX) that provide a size attribute for indicating how much namespace capacity is lost to metadata. The BTT change arrived at the start of the merge window and has appeared in a -next release. It can technically wait for 4.9, but it is small, fixes asymmetry in the libnvdimm-sysfs interface, and something I would have squeezed into the v4.8 pull request had it arrived a few days earlier. * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: tools/testing/nvdimm: fix SIGTERM vs hotplug crash nvdimm, btt: add a size attribute for BTTs libnvdimm, nd_blk: mask off reserved status bits
2016-08-12perf ppc64le: Fix build failure when libelf is not presentRavi Bangoria
arch__post_process_probe_trace_events() calls get_target_map() to prepare symbol table. get_target_map() is defined inside util/probe-event.c. probe-event.c will only get included in perf binary if CONFIG_LIBELF is set. Hence arch__post_process_probe_trace_events() needs to be defined inside #ifdef HAVE_LIBELF_SUPPORT to solve compilation error. Reported-and-Tested-by: Anton Blanchard <anton@samba.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/57ABFF88.8030905@linux.vnet.ibm.com [ Thunderbird MUA mangled it, fix that ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-12perf tools mem: Fix -t store option for record commandJiri Olsa
Michael reported 'perf mem -t store record' being broken. The reason is latest rework of this area: commit acbe613e0c03 ("perf tools: Add monitored events array") We don't mark perf_mem_events store record when -t store option is specified. Committer notes: Before: # perf mem -t store record usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.020 MB perf.data (7 samples) ] # perf evlist cycles:ppp # After: # perf mem -t store record usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.020 MB perf.data (7 samples) ] # perf evlist cpu/mem-stores/P # Reported-by: Michael Petlan <mpetlan@redhat.com> Signed-off-by: Jiri Olsa <jolsa@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Fixes: acbe613e0c03 ("perf tools: Add monitored events array") Link: http://lkml.kernel.org/r/1470905457-18311-1-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-12perf intel-pt: Fix ip compressionAdrian Hunter
The June 2015 Intel SDM introduced IP Compression types 4 and 6. Refer to section 36.4.2.2 Target IP (TIP) Packet - IP Compression. Existing Intel PT packet decoder did not support type 4, and got type 6 wrong. Because type 3 and type 4 have the same number of bytes, the packet 'count' has been changed from being the number of ip bytes to being the type code. That allows the Intel PT decoder to correctly decide whether to sign-extend or use the last ip. However that also meant the code had to be adjusted in a number of places. Currently hardware is not using the new compression types, so this fix has no effect on existing hardware. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1469005206-3049-1-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-10tools/testing/nvdimm: fix SIGTERM vs hotplug crashDan Williams
The unit tests crash when hotplug races the previous probe. This race requires that the loading of the nfit_test module be terminated with SIGTERM, and the module to be unloaded while the ars scan is still running. In contrast to the normal nfit driver, the unit test calls acpi_nfit_init() twice to simulate hotplug, whereas the nominal case goes through the acpi_nfit_notify() event handler. The acpi_nfit_notify() path is careful to flush the previous region registration before servicing the hotplug event. The unit test was missing this guarantee. BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff810cdce7>] pwq_activate_delayed_work+0x47/0x170 [..] Call Trace: [<ffffffff810ce186>] pwq_dec_nr_in_flight+0x66/0xa0 [<ffffffff810ce490>] process_one_work+0x2d0/0x680 [<ffffffff810ce331>] ? process_one_work+0x171/0x680 [<ffffffff810ce88e>] worker_thread+0x4e/0x480 [<ffffffff810ce840>] ? process_one_work+0x680/0x680 [<ffffffff810ce840>] ? process_one_work+0x680/0x680 [<ffffffff810d5343>] kthread+0xf3/0x110 [<ffffffff8199846f>] ret_from_fork+0x1f/0x40 [<ffffffff810d5250>] ? kthread_create_on_node+0x230/0x230 Cc: <stable@vger.kernel.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-08-10selftests/powerpc: Specify we expect to build with std=gnu99Michael Ellerman
We have some tests that assume we're using std=gnu99, which is fine on most compilers, but some old compilers use a different default. So make it explicit that we want to use std=gnu99. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-08-09Merge tag 'perf-urgent-for-mingo-20160809' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: User visible fixes: - Fix the lookup for a kernel module in 'perf probe', fixing for instance, the erroneous return of "[raid10]" when looking for "[raid1]" (Konstantin Khlebnikov) - Disable counters in a group before reading them in 'perf stat', to avoid skew (Mark Rutland) - Fix adding probes to function aliases in systems using kaslr (Masami Hiramatsu) - Trip libtraceevent trace_seq buffers, removing unnecessary memory usage that could bring a system using tracepoint events with 'perf top' to a crawl, as the trace_seq buffers start at a whooping 4 KB, which is very rarely used in perf's usecases, so realloc it to the really used space as a last measure after using libtraceevent functions to format the fields of tracepoint events (Arnaldo Carvalho de Melo) - Fix 'perf probe' location when using DWARF on ppc64le (Ravi Bangoria) - Allow specifying signedness casts to a 'perf probe' variable, to shorten the number of steps to see signed values that otherwise would always appear as hex values (Naohiro Aota) Documentation fixes: - Add 'bpf-output' field to 'perf script' usage message (Brendan Gregg) Infrastructure fixes: - Sync kernel header files: cpufeatures.h, {disabled,required}-features.h, bpf.h and vmx.h, so that we get a clean build, without warnings about files being different from the kernel counterparts. A verification of the need or desirability of changes in tools/ based on what was done in the kernel changesets was made and documented in the respective file sync changesets (Arnaldo Carvalho de Melo) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-09perf probe ppc64le: Fix probe location when using DWARFRavi Bangoria
Powerpc has Global Entry Point and Local Entry Point for functions. LEP catches call from both the GEP and the LEP. Symbol table of ELF contains GEP and Offset from which we can calculate LEP, but debuginfo does not have LEP info. Currently, perf prioritize symbol table over dwarf to probe on LEP for ppc64le. But when user tries to probe with function parameter, we fall back to using dwarf(i.e. GEP) and when function called via LEP, probe will never hit. For example: $ objdump -d vmlinux ... do_sys_open(): c0000000002eb4a0: e8 00 4c 3c addis r2,r12,232 c0000000002eb4a4: 60 00 42 38 addi r2,r2,96 c0000000002eb4a8: a6 02 08 7c mflr r0 c0000000002eb4ac: d0 ff 41 fb std r26,-48(r1) $ sudo ./perf probe do_sys_open $ sudo cat /sys/kernel/debug/tracing/kprobe_events p:probe/do_sys_open _text+3060904 $ sudo ./perf probe 'do_sys_open filename:string' $ sudo cat /sys/kernel/debug/tracing/kprobe_events p:probe/do_sys_open _text+3060896 filename_string=+0(%gpr4):string For second case, perf probed on GEP. So when function will be called via LEP, probe won't hit. $ sudo ./perf record -a -e probe:do_sys_open ls [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.195 MB perf.data ] To resolve this issue, let's not prioritize symbol table, let perf decide what it wants to use. Perf is already converting GEP to LEP when it uses symbol table. When perf uses debuginfo, let it find LEP offset form symbol table. This way we fall back to probe on LEP for all cases. After patch: $ sudo ./perf probe 'do_sys_open filename:string' $ sudo cat /sys/kernel/debug/tracing/kprobe_events p:probe/do_sys_open _text+3060904 filename_string=+0(%gpr4):string $ sudo ./perf record -a -e probe:do_sys_open ls [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.197 MB perf.data (11 samples) ] Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1470723805-5081-2-git-send-email-ravi.bangoria@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-09perf probe: Add function to post process kernel trace eventsRavi Bangoria
Instead of inline code, introduce function to post process kernel probe trace events. Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1470723805-5081-1-git-send-email-ravi.bangoria@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-09tools: Sync cpufeatures headers with the kernelArnaldo Carvalho de Melo
Due to: 1e61f78baf89 ("x86/cpufeature: Make sure DISABLED/REQUIRED macros are updated") No changes to tools using those headers (tools/arch/x86/lib/mem{set,cpu}_64.S) seems necessary. Detected by the tools build header drift checker: $ make -C tools/perf O=/tmp/build/perf make: Entering directory '/home/acme/git/linux/tools/perf' BUILD: Doing 'make -j4' parallel build GEN /tmp/build/perf/common-cmds.h Warning: tools/arch/x86/include/asm/disabled-features.h differs from kernel Warning: tools/arch/x86/include/asm/required-features.h differs from kernel Warning: tools/arch/x86/include/asm/cpufeatures.h differs from kernel CC /tmp/build/perf/util/probe-finder.o CC /tmp/build/perf/builtin-help.o <SNIP> ^C$ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-ja75m7zk8j0jkzmrv16i5ehw@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-09toops: Sync tools/include/uapi/linux/bpf.h with the kernelArnaldo Carvalho de Melo
The way we're using kernel headers in tools/ now, with a copy that is made to the same path prefixed by "tools/" plus checking if that copy got stale, i.e. if the kernel counterpart changed, helps in keeping track with new features that may be useful for tools to exploit. For instance, looking at all the changes to bpf.h since it was last copied to tools/include brings this to toolers' attention: Need to investigate this one to check how to run a program via perf, setting up a BPF event, that will take advantage of the way perf already calls clang/LLVM, sets up the event and runs the workload in a single command line, helping in debugging such semi cooperative programs: 96ae52279594 ("bpf: Add bpf_probe_write_user BPF helper to be called in tracers") This one needs further investigation about using the feature it improves in 'perf trace' to do some tcpdumpin' mixed with syscalls, tracepoints, probe points, callgraphs, etc: 555c8a8623a3 ("bpf: avoid stack copy and use skb ctx for event output") Add tracing just packets that are related to some container to that mix: 4a482f34afcc ("cgroup: bpf: Add bpf_skb_in_cgroup_proto") 4ed8ec521ed5 ("cgroup: bpf: Add BPF_MAP_TYPE_CGROUP_ARRAY") Definetely needs to have example programs accessing task_struct from a bpf proggie started from 'perf trace': 606274c5abd8 ("bpf: introduce bpf_get_current_task() helper") Core networking related, XDP: 6ce96ca348a9 ("bpf: add XDP_TX xdp_action for direct forwarding") 6a773a15a1e8 ("bpf: add XDP prog type for early driver filter") 13c5c240f789 ("bpf: add bpf_get_hash_recalc helper") d2485c4242a8 ("bpf: add bpf_skb_change_type helper") 6578171a7ff0 ("bpf: add bpf_skb_change_proto helper") Changes detected by the tools build system: $ make -C tools/perf O=/tmp/build/perf install-bin make: Entering directory '/home/acme/git/linux/tools/perf' BUILD: Doing 'make -j4' parallel build Warning: tools/include/uapi/linux/bpf.h differs from kernel INSTALL GTK UI CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o <SNIP> $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: Brenden Blanco <bblanco@plumgrid.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-difq4ts1xvww6eyfs9e7zlft@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-09tools: Sync cpufeatures.h and vmx.h with the kernelArnaldo Carvalho de Melo
There were changes related to the deprecation of the "pcommit" instruction: fd1d961dd681 ("x86/insn: remove pcommit") dfa169bbee00 ("Revert "KVM: x86: add pcommit support"") No need to update anything in the tools, as "pcommit" wasn't being listed on the VMX_EXIT_REASONS in the tools/perf/arch/x86/util/kvm-stat.c file. Just grab fresh copies of these files to silence the file cache coherency detector: $ make -C tools/perf O=/tmp/build/perf install-bin make: Entering directory '/home/acme/git/linux/tools/perf' BUILD: Doing 'make -j4' parallel build Warning: tools/arch/x86/include/asm/cpufeatures.h differs from kernel Warning: tools/arch/x86/include/uapi/asm/vmx.h differs from kernel INSTALL GTK UI <SNIP> # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Wang Nan <wangnan0@huawei.com> Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com> Link: http://lkml.kernel.org/n/tip-07pmcc1ysydhyyxbmp1vt0l4@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-09perf probe: Support signedness castingNaohiro Aota
The 'perf probe' tool detects a variable's type and use the detected type to add a new probe. Then, kprobes prints its variable in hexadecimal format if the variable is unsigned and prints in decimal if it is signed. We sometimes want to see unsigned variable in decimal format (i.e. sector_t or size_t). In that case, we need to investigate the variable's size manually to specify just signedness. This patch add signedness casting support. By specifying "s" or "u" as a type, perf-probe will investigate variable size as usual and use the specified signedness. E.g. without this: $ perf probe -a 'submit_bio bio->bi_iter.bi_sector' Added new event: probe:submit_bio (on submit_bio with bi_sector=bio->bi_iter.bi_sector) You can now use it in all perf tools, such as: perf record -e probe:submit_bio -aR sleep 1 $ cat trace_pipe|head dbench-9692 [003] d..1 971.096633: submit_bio: (submit_bio+0x0/0x140) bi_sector=0x3a3d00 dbench-9692 [003] d..1 971.096685: submit_bio: (submit_bio+0x0/0x140) bi_sector=0x1a3d80 dbench-9692 [003] d..1 971.096687: submit_bio: (submit_bio+0x0/0x140) bi_sector=0x3a3d80 ... // need to investigate the variable size $ perf probe -a 'submit_bio bio->bi_iter.bi_sector:s64' Added new event: probe:submit_bio (on submit_bio with bi_sector=bio->bi_iter.bi_sector:s64) You can now use it in all perf tools, such as: perf record -e probe:submit_bio -aR sleep 1 With this: // just use "s" to cast its signedness $ perf probe -v -a 'submit_bio bio->bi_iter.bi_sector:s' Added new event: probe:submit_bio (on submit_bio with bi_sector=bio->bi_iter.bi_sector:s) You can now use it in all perf tools, such as: perf record -e probe:submit_bio -aR sleep 1 $ cat trace_pipe|head dbench-9689 [001] d..1 1212.391237: submit_bio: (submit_bio+0x0/0x140) bi_sector=128 dbench-9689 [001] d..1 1212.391252: submit_bio: (submit_bio+0x0/0x140) bi_sector=131072 dbench-9697 [006] d..1 1212.398611: submit_bio: (submit_bio+0x0/0x140) bi_sector=30208 This commit also update perf-probe.txt to describe "types". Most parts are based on existing documentation: Documentation/trace/kprobetrace.txt Committer note: Testing using 'perf trace': # perf probe -a 'submit_bio bio->bi_iter.bi_sector' Added new event: probe:submit_bio (on submit_bio with bi_sector=bio->bi_iter.bi_sector) You can now use it in all perf tools, such as: perf record -e probe:submit_bio -aR sleep 1 # trace --no-syscalls --ev probe:submit_bio 0.000 probe:submit_bio:(ffffffffac3aee00) bi_sector=0xc133c0) 3181.861 probe:submit_bio:(ffffffffac3aee00) bi_sector=0x6cffb8) 3181.881 probe:submit_bio:(ffffffffac3aee00) bi_sector=0x6cffc0) 3184.488 probe:submit_bio:(ffffffffac3aee00) bi_sector=0x6cffc8) <SNIP> 4717.927 probe:submit_bio:(ffffffffac3aee00) bi_sector=0x4dc7a88) 4717.970 probe:submit_bio:(ffffffffac3aee00) bi_sector=0x4dc7880) ^C[root@jouet ~]# Now, using this new feature: [root@jouet ~]# perf probe -a 'submit_bio bio->bi_iter.bi_sector:s' Added new event: probe:submit_bio (on submit_bio with bi_sector=bio->bi_iter.bi_sector:s) You can now use it in all perf tools, such as: perf record -e probe:submit_bio -aR sleep 1 [root@jouet ~]# trace --no-syscalls --ev probe:submit_bio 0.000 probe:submit_bio:(ffffffffac3aee00) bi_sector=7145704) 0.017 probe:submit_bio:(ffffffffac3aee00) bi_sector=7145712) 0.019 probe:submit_bio:(ffffffffac3aee00) bi_sector=7145720) 2.567 probe:submit_bio:(ffffffffac3aee00) bi_sector=7145728) 5631.919 probe:submit_bio:(ffffffffac3aee00) bi_sector=0) 5631.941 probe:submit_bio:(ffffffffac3aee00) bi_sector=8) 5631.945 probe:submit_bio:(ffffffffac3aee00) bi_sector=16) 5631.948 probe:submit_bio:(ffffffffac3aee00) bi_sector=24) ^C# With callchains: # trace --no-syscalls --ev probe:submit_bio/max-stack=10/ 0.000 probe:submit_bio:(ffffffffac3aee00) bi_sector=50662544) submit_bio+0xa8200001 ([kernel.kallsyms]) submit_bh+0xa8200013 ([kernel.kallsyms]) jbd2_journal_commit_transaction+0xa8200691 ([kernel.kallsyms]) kjournald2+0xa82000ca ([kernel.kallsyms]) kthread+0xa82000d8 ([kernel.kallsyms]) ret_from_fork+0xa820001f ([kernel.kallsyms]) 0.023 probe:submit_bio:(ffffffffac3aee00) bi_sector=50662552) submit_bio+0xa8200001 ([kernel.kallsyms]) submit_bh+0xa8200013 ([kernel.kallsyms]) jbd2_journal_commit_transaction+0xa8200691 ([kernel.kallsyms]) kjournald2+0xa82000ca ([kernel.kallsyms]) kthread+0xa82000d8 ([kernel.kallsyms]) ret_from_fork+0xa820001f ([kernel.kallsyms]) 0.027 probe:submit_bio:(ffffffffac3aee00) bi_sector=50662560) submit_bio+0xa8200001 ([kernel.kallsyms]) submit_bh+0xa8200013 ([kernel.kallsyms]) jbd2_journal_commit_transaction+0xa8200691 ([kernel.kallsyms]) kjournald2+0xa82000ca ([kernel.kallsyms]) kthread+0xa82000d8 ([kernel.kallsyms]) ret_from_fork+0xa820001f ([kernel.kallsyms]) 2.593 probe:submit_bio:(ffffffffac3aee00) bi_sector=50662568) submit_bio+0xa8200001 ([kernel.kallsyms]) submit_bh+0xa8200013 ([kernel.kallsyms]) journal_submit_commit_record+0xa82001ac ([kernel.kallsyms]) jbd2_journal_commit_transaction+0xa82012e8 ([kernel.kallsyms]) kjournald2+0xa82000ca ([kernel.kallsyms]) kthread+0xa82000d8 ([kernel.kallsyms]) ret_from_fork+0xa820001f ([kernel.kallsyms]) ^C# Signed-off-by: Naohiro Aota <naohiro.aota@hgst.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1470710408-23515-1-git-send-email-naohiro.aota@hgst.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-09perf stat: Avoid skew when reading eventsMark Rutland
When we don't have a tracee (i.e. we're attaching to a task or CPU), counters can still be running after our workload finishes, and can still be running as we read their values. As we read events one-by-one, there can be arbitrary skew between values of events, even within a group. This means that ratios within an event group are not reliable. This skew can be seen if measuring a group of identical events, e.g: # perf stat -a -C0 -e '{cycles,cycles}' sleep 1 To avoid this, we must stop groups from counting before we read the values of any constituent events. This patch adds and makes use of a new disable_counters() helper, which disables group leaders (and thus each group as a whole). This mirrors the use of enable_counters() for starting event groups in the absence of a tracee. Closing a group leader splits the group, and without a disabled group leader the newly split events will begin counting. Thus to ensure counts are reliable we must defer closing group leaders until all counts have been read. To do so this patch removes the event closing logic from the read_counters() helper, explicitly closes the events using perf_evlist__close(), which also aids legibility. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1470747869-3567-1-git-send-email-mark.rutland@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-09perf probe: Fix module name matchingKonstantin Khlebnikov
If module is "module" then dso->short_name is "[module]". Substring comparing is't enough: "raid10" matches to "[raid1]". This patch also checks terminating zero in module name. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Link: http://lkml.kernel.org/r/147039975648.715620.12985971832789032159.stgit@buzz Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-09perf probe: Adjust map->reloc offset when finding kernel symbol from mapMasami Hiramatsu
Adjust map->reloc offset for the unmapped address when finding alternative symbol address from map, because KASLR can relocate the kernel symbol address. The same adjustment has been done when finding appropriate kernel symbol address from map which was introduced by commit f90acac75713 ("perf probe: Find given address from offline dwarf") Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org> Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org> Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/20160806192948.e366f3fbc4b194de600f8326@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-09perf hists: Trim libtraceevent trace_seq buffersArnaldo Carvalho de Melo
When we use libtraceevent to format trace event fields into printable strings to use in hist entries it is important to trim it from the default 4 KiB it starts with to what is really used, to reduce the memory footprint, so use realloc(seq.buffer, seq.len + 1) when returning the seq.buffer formatted with the fields contents. Reported-and-Tested-by: Wang Nan <wangnan0@huawei.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/n/tip-t3hl7uxmilrkigzmc90rlhk2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-09perf script: Add 'bpf-output' field to usage messageBrendan Gregg
This adds the 'bpf-output' field to the perf script usage message, and docs. Signed-off-by: Brendan Gregg <bgregg@netflix.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1470192469-11910-4-git-send-email-bgregg@netflix.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-08tools/gpio: fix gpio-event-mon header commentBaruch Siach
Fixes: 97f69747d8b1 ('tools/gpio: add the gpio-event-mon tool') Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-06Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Ingo Molnar: "Mostly tooling fixes and some late tooling updates, plus two perf related printk message fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tests bpf: Use SyS_epoll_wait alias perf tests: objdump output can contain multi byte chunks perf record: Add --sample-cpu option perf hists: Introduce output_resort_cb method perf tools: Move config/Makefile into Makefile.config perf tests: Add test for bitmap_scnprintf function tools lib: Add bitmap_and function tools lib: Add bitmap_scnprintf function tools lib: Add bitmap_alloc function tools lib traceevent: Ignore generated library files perf tools: Fix build failure on perl script context perf/core: Change log level for duration warning to KERN_INFO perf annotate: Plug filename string leak perf annotate: Introduce strerror for handling symbol__disassemble() errors perf annotate: Rename symbol__annotate() to symbol__disassemble() perf/x86: Modify error message in virtualized environment perf target: str_error_r() always returns the buffer it receives perf annotate: Use pipe + fork instead of popen perf evsel: Introduce constructor for cycles event
2016-08-05Merge tag 'ntb-4.8' of git://github.com/jonmason/ntbLinus Torvalds
Pull NTB updates from Jon Mason: "NTB bug fixes for the ntb_tool and ntb_perf, and improvements to the ntb_perf and ntb_pingpong for increased debugability. Also, modification to the ntb_transport layer to increase/decrease the number of transport entries depending on the ring size" * tag 'ntb-4.8' of git://github.com/jonmason/ntb: NTB: ntb_hw_intel: use local variable pdev NTB: ntb_hw_intel: show BAR size in debugfs info ntb_test: Add a selftest script for the NTB subsystem ntb_perf: clear link_is_up flag when the link goes down. ntb_pingpong: Add a debugfs file to get the ping count ntb_tool: Add link status and files to debugfs ntb_tool: Postpone memory window initialization for the user ntb_perf: Wait for link before running test ntb_perf: Return results by reading the run file ntb_perf: Improve thread handling to increase robustness ntb_perf: Schedule based on time not on performance ntb_transport: Check the number of spads the hardware supports ntb_tool: Add memory window debug support ntb_perf: Allow limiting the size of the memory windows NTB: allocate number transport entries depending on size of ring size ntb_tool: BUG: Ensure the buffer size is large enough to return all spads ntb_tool: Fix infinite loop bug when writing spad/peer_spad file
2016-08-05ntb_test: Add a selftest script for the NTB subsystemLogan Gunthorpe
This script automates testing doorbells, scratchpads and memory windows for an NTB device. It can be run locally, with the NTB looped back to the same host or use SSH to remotely control the second host. In the single host case, the script just needs to be passed two arguments: a PCI ID for each side of the link. In the two host case the -r option must be used to specify the remote hostname (which must be SSH accessible and should probably have ssh-keys exchanged). A sample run looks like this: $ sudo ./ntb_test.sh 0000:03:00.1 0000:83:00.1 -p 29 Starting ntb_tool tests... Running link tests on: 0000:03:00.1 / 0000:83:00.1 Passed Running link tests on: 0000:83:00.1 / 0000:03:00.1 Passed Running db tests on: 0000:03:00.1 / 0000:83:00.1 Passed Running db tests on: 0000:83:00.1 / 0000:03:00.1 Passed Running spad tests on: 0000:03:00.1 / 0000:83:00.1 Passed Running spad tests on: 0000:83:00.1 / 0000:03:00.1 Passed Running mw0 tests on: 0000:03:00.1 / 0000:83:00.1 Passed Running mw0 tests on: 0000:83:00.1 / 0000:03:00.1 Passed Running mw1 tests on: 0000:03:00.1 / 0000:83:00.1 Passed Running mw1 tests on: 0000:83:00.1 / 0000:03:00.1 Passed Starting ntb_pingpong tests... Running ping pong tests on: 0000:03:00.1 / 0000:83:00.1 Passed Starting ntb_perf tests... Running local perf test without DMA 0: copied 536870912 bytes in 164453 usecs, 3264 MBytes/s Passed Running remote perf test without DMA 0: copied 536870912 bytes in 164453 usecs, 3264 MBytes/s Passed Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Acked-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2016-08-05Merge tag 'rtc-4.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "RTC for 4.8 Cleanups: - huge cleanup of rtc-generic and char/genrtc this allowed to cleanup rtc-cmos, rtc-sh, rtc-m68k, rtc-powerpc and rtc-parisc - move mn10300 to rtc-cmos Subsystem: - fix wakealarms after hibernate - multiples fixes for rctest - simplify implementations of .read_alarm New drivers: - Maxim MAX6916 Drivers: - ds1307: fix weekday - m41t80: add wakeup support - pcf85063: add support for PCF85063A variant - rv8803: extend i2c fix and other fixes - s35390a: fix alarm reading, this fixes instant reboot after shutdown for QNAP TS-41x - s3c: clock fixes" * tag 'rtc-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (65 commits) rtc: rv8803: Clear V1F when setting the time rtc: rv8803: Stop the clock while setting the time rtc: rv8803: Always apply the I²C workaround rtc: rv8803: Fix read day of week rtc: rv8803: Remove the check for valid time rtc: rv8803: Kconfig: Indicate rx8900 support rtc: asm9260: remove .owner field for driver rtc: at91sam9: Fix missing spin_lock_init() rtc: m41t80: add suspend handlers for alarm IRQ rtc: m41t80: make it a real error message rtc: pcf85063: Add support for the PCF85063A device rtc: pcf85063: fix year range rtc: hym8563: in .read_alarm set .tm_sec to 0 to signal minute accuracy rtc: explicitly set tm_sec = 0 for drivers with minute accurancy rtc: s3c: Add s3c_rtc_{enable/disable}_clk in s3c_rtc_setfreq() rtc: s3c: Remove unnecessary call to disable already disabled clock rtc: abx80x: use devm_add_action_or_reset() rtc: m41t80: use devm_add_action_or_reset() rtc: fix a typo and reduce three empty lines to one rtc: s35390a: improve two comments in .set_alarm ...
2016-08-04Merge tag 'perf-core-for-mingo-20160803' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: New features: - Add --sample-cpu to 'perf record', to explicitely ask for sampling the CPU (Jiri Olsa) Fixes: - Fix processing of multi byte chunks in objdump output, fixing disassemble processing for annotation on at least ARM64 (Jan Stancek) - Use SyS_epoll_wait in a BPF 'perf test' entry instead of sys_epoll_wait, that is not present in the DWARF info in vmlinux files (Arnaldo Carvalho de Melo) - Add -wno-shadow when processing files using perl headers, fixing the build on Fedora Rawhide and Arch Linux (Namhyung Kim) Infrastructure changes: - Annotate prep work to better catch and report errors related to using objdump to disassemble DSOs (Arnaldo Carvalho de Melo) - Add 'alloc', 'scnprintf' and 'and' methods for bitmap processing (Jiri Olsa) - Add nested output resorting callback in hists processing (Jiri Olsa) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-03perf tests bpf: Use SyS_epoll_wait aliasArnaldo Carvalho de Melo
Something made the sys_epoll_wait() function alias not to be found in the vmlinux DWARF info, being found only in /proc/kallsyms, which made the BPF perf tests to fail: [root@jouet ~]# perf test BPF 37: Test BPF filter : 37.1: Test basic BPF filtering : FAILED! 37.2: Test BPF prologue generation : Skip 37.3: Test BPF relocation checker : Skip [root@jouet ~]# Using -v we can see it is failing to find DWARF info for the probed function, sys_epoll_wait, which we can find in /proc/kallsyms but not in vmlinux with CONFIG_DEBUG_INFO: [root@jouet ~]# grep -w sys_epoll_wait /proc/kallsyms ffffffffbd295b50 T sys_epoll_wait [root@jouet ~]# [root@jouet ~]# readelf -wi /lib/modules/4.7.0+/build/vmlinux | grep -w sys_epoll_wait [root@jouet ~]# If we try to use perf probe: [root@jouet ~]# perf probe sys_epoll_wait Failed to find debug information for address ffffffffbd295b50 Probe point 'sys_epoll_wait' not found. Error: Failed to add events. [root@jouet ~]# It all works if we use SyS_epoll_wait, that is just an alias to the probed function: [root@jouet ~]# grep -i sys_epoll_wait /proc/kallsyms ffffffffbd295b50 T SyS_epoll_wait ffffffffbd295b50 T sys_epoll_wait [root@jouet ~]# So use it: [root@jouet ~]# perf test BPF 37: Test BPF filter : 37.1: Test basic BPF filtering : Ok 37.2: Test BPF prologue generation : Ok 37.3: Test BPF relocation checker : Ok [root@jouet ~]# Further info: [root@jouet ~]# gcc --version gcc (GCC) 6.1.1 20160621 (Red Hat 6.1.1-3) [acme@jouet linux]$ cat /etc/fedora-release Fedora release 24 (Twenty Four) Investigation as to why it fails is still underway, but it was always going from sys_epoll_wait to SyS_epoll_wait when looking up the DWARF info in vmlinux, and this is what is breaking now. Switching to use SyS_epoll_wait allows this test to proceed and test the BPF code it was designed for, so lets have this in to allow passing this test while we fix the root cause. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-7hekjp0bodwjbb419sl2b55h@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-02tools/testing/radix-tree/linux/gfp.h: fix bitrotted valueValdis Kletnieks
Apparently, the tools/testing version dates to a few flags ago, and we've sprouted 4 new ones since. Keep in sync with the value in the main tree... Link: http://lkml.kernel.org/r/23400.1469702675@turing-police.cc.vt.edu Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02perf tests: objdump output can contain multi byte chunksJan Stancek
objdump's raw insn output can vary across architectures on the number of bytes per chunk (bpc) displayed and their endianness. The code-reading test relied on reading objdump output as 1 bpc. Kaixu Xia reported test failure on ARM64, where objdump displays 4 bpc: 70c48: f90027bf str xzr, [x29,#72] 70c4c: 91224000 add x0, x0, #0x890 70c50: f90023a0 str x0, [x29,#64] This patch adds support to read raw insn output for any bpc length. In case of 2+ bpc it also guesses objdump's display endian. Reported-and-Tested-by: Kaixu Xia <xiakaixu@huawei.com> Signed-off-by: Jan Stancek <jstancek@redhat.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/07f0f7bcbda78deb423298708ef9b6a54d6b92bd.1452592712.git.jstancek@redhat.com [ Fix up pr_fmt() call to use %zd for size_t variables, fixing the build on Ubuntu cross-compiling to armhf and ppc64 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-02perf record: Add --sample-cpu optionJiri Olsa
Adding --sample-cpu option to be able to explicitly enable CPU sample type. Currently it's only enable implicitly in case the target is cpu related. It will be useful for following c2c record tool. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1470074555-24889-8-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-02perf hists: Introduce output_resort_cb methodJiri Olsa
When dealing with nested hist entries it's helpful to have a way to resort those nested objects. Adding optional callback call into output_resort function and following new interface function: typedef int (*hists__resort_cb_t)(struct hist_entry *he); void hists__output_resort_cb(struct hists *hists, struct ui_progress *prog, hists__resort_cb_t cb); Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1470074555-24889-7-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-02perf tools: Move config/Makefile into Makefile.configJiri Olsa
There's no reason to keep it in separate directory now when we moved out the rest of the files. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1470074555-24889-6-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-02perf tests: Add test for bitmap_scnprintf functionJiri Olsa
Automatically test the bitmap_scnprintf function. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1470074555-24889-5-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>