diff options
Diffstat (limited to 'drivers/gpu/drm/i915/intel_pm.c')
| -rw-r--r-- | drivers/gpu/drm/i915/intel_pm.c | 270 |
1 files changed, 264 insertions, 6 deletions
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index d5deb58a2128..53e13c10e4ea 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -2852,6 +2852,7 @@ bool ilk_disable_lp_wm(struct drm_device *dev) #define SKL_DDB_SIZE 896 /* in blocks */ #define BXT_DDB_SIZE 512 +#define SKL_SAGV_BLOCK_TIME 30 /* µs */ /* * Return the index of a plane in the SKL DDB and wm result arrays. Primary @@ -2875,6 +2876,153 @@ skl_wm_plane_id(const struct intel_plane *plane) } } +/* + * SAGV dynamically adjusts the system agent voltage and clock frequencies + * depending on power and performance requirements. The display engine access + * to system memory is blocked during the adjustment time. Because of the + * blocking time, having this enabled can cause full system hangs and/or pipe + * underruns if we don't meet all of the following requirements: + * + * - <= 1 pipe enabled + * - All planes can enable watermarks for latencies >= SAGV engine block time + * - We're not using an interlaced display configuration + */ +int +skl_enable_sagv(struct drm_i915_private *dev_priv) +{ + int ret; + + if (dev_priv->skl_sagv_status == I915_SKL_SAGV_NOT_CONTROLLED || + dev_priv->skl_sagv_status == I915_SKL_SAGV_ENABLED) + return 0; + + DRM_DEBUG_KMS("Enabling the SAGV\n"); + mutex_lock(&dev_priv->rps.hw_lock); + + ret = sandybridge_pcode_write(dev_priv, GEN9_PCODE_SAGV_CONTROL, + GEN9_SAGV_ENABLE); + + /* We don't need to wait for the SAGV when enabling */ + mutex_unlock(&dev_priv->rps.hw_lock); + + /* + * Some skl systems, pre-release machines in particular, + * don't actually have an SAGV. + */ + if (ret == -ENXIO) { + DRM_DEBUG_DRIVER("No SAGV found on system, ignoring\n"); + dev_priv->skl_sagv_status = I915_SKL_SAGV_NOT_CONTROLLED; + return 0; + } else if (ret < 0) { + DRM_ERROR("Failed to enable the SAGV\n"); + return ret; + } + + dev_priv->skl_sagv_status = I915_SKL_SAGV_ENABLED; + return 0; +} + +static int +skl_do_sagv_disable(struct drm_i915_private *dev_priv) +{ + int ret; + uint32_t temp = GEN9_SAGV_DISABLE; + + ret = sandybridge_pcode_read(dev_priv, GEN9_PCODE_SAGV_CONTROL, + &temp); + if (ret) + return ret; + else + return temp & GEN9_SAGV_IS_DISABLED; +} + +int +skl_disable_sagv(struct drm_i915_private *dev_priv) +{ + int ret, result; + + if (dev_priv->skl_sagv_status == I915_SKL_SAGV_NOT_CONTROLLED || + dev_priv->skl_sagv_status == I915_SKL_SAGV_DISABLED) + return 0; + + DRM_DEBUG_KMS("Disabling the SAGV\n"); + mutex_lock(&dev_priv->rps.hw_lock); + + /* bspec says to keep retrying for at least 1 ms */ + ret = wait_for(result = skl_do_sagv_disable(dev_priv), 1); + mutex_unlock(&dev_priv->rps.hw_lock); + + if (ret == -ETIMEDOUT) { + DRM_ERROR("Request to disable SAGV timed out\n"); + return -ETIMEDOUT; + } + + /* + * Some skl systems, pre-release machines in particular, + * don't actually have an SAGV. + */ + if (result == -ENXIO) { + DRM_DEBUG_DRIVER("No SAGV found on system, ignoring\n"); + dev_priv->skl_sagv_status = I915_SKL_SAGV_NOT_CONTROLLED; + return 0; + } else if (result < 0) { + DRM_ERROR("Failed to disable the SAGV\n"); + return result; + } + + dev_priv->skl_sagv_status = I915_SKL_SAGV_DISABLED; + return 0; +} + +bool skl_can_enable_sagv(struct drm_atomic_state *state) +{ + struct drm_device *dev = state->dev; + struct drm_i915_private *dev_priv = to_i915(dev); + struct intel_atomic_state *intel_state = to_intel_atomic_state(state); + struct drm_crtc *crtc; + enum pipe pipe; + int level, plane; + + /* + * SKL workaround: bspec recommends we disable the SAGV when we have + * more then one pipe enabled + * + * If there are no active CRTCs, no additional checks need be performed + */ + if (hweight32(intel_state->active_crtcs) == 0) + return true; + else if (hweight32(intel_state->active_crtcs) > 1) + return false; + + /* Since we're now guaranteed to only have one active CRTC... */ + pipe = ffs(intel_state->active_crtcs) - 1; + crtc = dev_priv->pipe_to_crtc_mapping[pipe]; + + if (crtc->state->mode.flags & DRM_MODE_FLAG_INTERLACE) + return false; + + for_each_plane(dev_priv, pipe, plane) { + /* Skip this plane if it's not enabled */ + if (intel_state->wm_results.plane[pipe][plane][0] == 0) + continue; + + /* Find the highest enabled wm level for this plane */ + for (level = ilk_wm_max_level(dev); + intel_state->wm_results.plane[pipe][plane][level] == 0; --level) + { } + + /* + * If any of the planes on this pipe don't enable wm levels + * that incur memory latencies higher then 30µs we can't enable + * the SAGV + */ + if (dev_priv->wm.skl_latency[level] < SKL_SAGV_BLOCK_TIME) + return false; + } + + return true; +} + static void skl_ddb_get_pipe_allocation_limits(struct drm_device *dev, const struct intel_crtc_state *cstate, @@ -3107,8 +3255,6 @@ skl_get_total_relative_data_rate(struct intel_crtc_state *intel_cstate) total_data_rate += intel_cstate->wm.skl.plane_y_data_rate[id]; } - WARN_ON(cstate->plane_mask && total_data_rate == 0); - return total_data_rate; } @@ -3912,9 +4058,24 @@ skl_compute_ddb(struct drm_atomic_state *state) * pretend that all pipes switched active status so that we'll * ensure a full DDB recompute. */ - if (dev_priv->wm.distrust_bios_wm) + if (dev_priv->wm.distrust_bios_wm) { + ret = drm_modeset_lock(&dev->mode_config.connection_mutex, + state->acquire_ctx); + if (ret) + return ret; + intel_state->active_pipe_changes = ~0; + /* + * We usually only initialize intel_state->active_crtcs if we + * we're doing a modeset; make sure this field is always + * initialized during the sanitization process that happens + * on the first commit too. + */ + if (!intel_state->modeset) + intel_state->active_crtcs = dev_priv->active_crtcs; + } + /* * If the modeset changes which CRTC's are active, we need to * recompute the DDB allocation for *all* active pipes, even @@ -3943,11 +4104,33 @@ skl_compute_ddb(struct drm_atomic_state *state) ret = skl_allocate_pipe_ddb(cstate, ddb); if (ret) return ret; + + ret = drm_atomic_add_affected_planes(state, &intel_crtc->base); + if (ret) + return ret; } return 0; } +static void +skl_copy_wm_for_pipe(struct skl_wm_values *dst, + struct skl_wm_values *src, + enum pipe pipe) +{ + dst->wm_linetime[pipe] = src->wm_linetime[pipe]; + memcpy(dst->plane[pipe], src->plane[pipe], + sizeof(dst->plane[pipe])); + memcpy(dst->plane_trans[pipe], src->plane_trans[pipe], + sizeof(dst->plane_trans[pipe])); + + dst->ddb.pipe[pipe] = src->ddb.pipe[pipe]; + memcpy(dst->ddb.y_plane[pipe], src->ddb.y_plane[pipe], + sizeof(dst->ddb.y_plane[pipe])); + memcpy(dst->ddb.plane[pipe], src->ddb.plane[pipe], + sizeof(dst->ddb.plane[pipe])); +} + static int skl_compute_wm(struct drm_atomic_state *state) { @@ -4020,8 +4203,10 @@ static void skl_update_wm(struct drm_crtc *crtc) struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = to_i915(dev); struct skl_wm_values *results = &dev_priv->wm.skl_results; + struct skl_wm_values *hw_vals = &dev_priv->wm.skl_hw; struct intel_crtc_state *cstate = to_intel_crtc_state(crtc->state); struct skl_pipe_wm *pipe_wm = &cstate->wm.skl.optimal; + int pipe; if ((results->dirty_pipes & drm_crtc_mask(crtc)) == 0) return; @@ -4033,8 +4218,12 @@ static void skl_update_wm(struct drm_crtc *crtc) skl_write_wm_values(dev_priv, results); skl_flush_wm_values(dev_priv, results); - /* store the new configuration */ - dev_priv->wm.skl_hw = *results; + /* + * Store the new configuration (but only for the pipes that have + * changed; the other values weren't recomputed). + */ + for_each_pipe_masked(dev_priv, pipe, results->dirty_pipes) + skl_copy_wm_for_pipe(hw_vals, results, pipe); mutex_unlock(&dev_priv->wm.wm_mutex); } @@ -7658,8 +7847,53 @@ void intel_init_pm(struct drm_device *dev) } } +static inline int gen6_check_mailbox_status(struct drm_i915_private *dev_priv) +{ + uint32_t flags = + I915_READ_FW(GEN6_PCODE_MAILBOX) & GEN6_PCODE_ERROR_MASK; + + switch (flags) { + case GEN6_PCODE_SUCCESS: + return 0; + case GEN6_PCODE_UNIMPLEMENTED_CMD: + case GEN6_PCODE_ILLEGAL_CMD: + return -ENXIO; + case GEN6_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE: + return -EOVERFLOW; + case GEN6_PCODE_TIMEOUT: + return -ETIMEDOUT; + default: + MISSING_CASE(flags) + return 0; + } +} + +static inline int gen7_check_mailbox_status(struct drm_i915_private *dev_priv) +{ + uint32_t flags = + I915_READ_FW(GEN6_PCODE_MAILBOX) & GEN6_PCODE_ERROR_MASK; + + switch (flags) { + case GEN6_PCODE_SUCCESS: + return 0; + case GEN6_PCODE_ILLEGAL_CMD: + return -ENXIO; + case GEN7_PCODE_TIMEOUT: + return -ETIMEDOUT; + case GEN7_PCODE_ILLEGAL_DATA: + return -EINVAL; + case GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE: + return -EOVERFLOW; + default: + MISSING_CASE(flags); + return 0; + } +} + int sandybridge_pcode_read(struct drm_i915_private *dev_priv, u32 mbox, u32 *val) { + int status; + WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock)); /* GEN6_PCODE_* are outside of the forcewake domain, we can @@ -7686,12 +7920,25 @@ int sandybridge_pcode_read(struct drm_i915_private *dev_priv, u32 mbox, u32 *val *val = I915_READ_FW(GEN6_PCODE_DATA); I915_WRITE_FW(GEN6_PCODE_DATA, 0); + if (INTEL_GEN(dev_priv) > 6) + status = gen7_check_mailbox_status(dev_priv); + else + status = gen6_check_mailbox_status(dev_priv); + + if (status) { + DRM_DEBUG_DRIVER("warning: pcode (read) mailbox access failed: %d\n", + status); + return status; + } + return 0; } int sandybridge_pcode_write(struct drm_i915_private *dev_priv, - u32 mbox, u32 val) + u32 mbox, u32 val) { + int status; + WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock)); /* GEN6_PCODE_* are outside of the forcewake domain, we can @@ -7716,6 +7963,17 @@ int sandybridge_pcode_write(struct drm_i915_private *dev_priv, I915_WRITE_FW(GEN6_PCODE_DATA, 0); + if (INTEL_GEN(dev_priv) > 6) + status = gen7_check_mailbox_status(dev_priv); + else + status = gen6_check_mailbox_status(dev_priv); + + if (status) { + DRM_DEBUG_DRIVER("warning: pcode (write) mailbox access failed: %d\n", + status); + return status; + } + return 0; } |